Italiano dropdown-ico

Manuale per l’uso Boundless ADDS 3153 ASCII

82 pagine 0.54 mb
Scarica

Vai alla pagina of 82

Summary
  • Boundless ADDS 3153 ASCII - page 1

    ADDS 3153 ASCII Display Terminal User’s Guide ...

  • Boundless ADDS 3153 ASCII - page 2

    Before using this information and the product it supports, be sure to read the general information under “Notices.” It is the policy of Boundless Technologies, Inc. to improve products as new technology, components, software, and firmwa re become available. Boundless Technologies, therefore, reserves the right to change specifications without p ...

  • Boundless ADDS 3153 ASCII - page 3

    chapter 1 Contents Preface v This guide... ......................................................................................... vi How to Connect/Disconnect the Terminal ................................................... vii Notices .............................................................................................. viii Trademarks ...

  • Boundless ADDS 3153 ASCII - page 4

    ii Contents STEP 1 – Know Your Devices .................................................................. 17 STEP 2 – Physical Connections ................................................................. 18 STEP 3 – Number of Sessions Selection ....................................................... 18 STEP 4 – Linking Ports to Sessio ns . ...

  • Boundless ADDS 3153 ASCII - page 5

    Contents iii TABS: F10 .......................................................................................... 52 ANSWERBACK: F11 ............................................................................ 53 PROGRAM: F12 .................................................................................. 54 EXECUTE: Prnt Sc ..................... ...

  • Boundless ADDS 3153 ASCII - page 6

    v chapter 1 Preface This product is in conformity with the protection requirements of EU Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Boundless Technologies cannot accept res ponsibility for any failure to satisfy the protection requirements resulting from a non - reco ...

  • Boundless ADDS 3153 ASCII - page 7

    vi Preface This guide... is a user’s manual and contains all of the information necessary to install, setup, and use the 260 product. More detailed information on programming using control codes and escape sequences, default strings and character sets, international language support, etc. can be obtained by calling the Boun dless Technologies Hot ...

  • Boundless ADDS 3153 ASCII - page 8

    How to Connect/Disconnect the Terminal vii How to Connect/Disconnect the T erminal To Connect: To Disconnect: First, turn everything OFF. First, turn everything OFF. Attach all cables to devices. Remove power cord from outlet. Attach signal cables to receptacles. Remove signal cables from receptacles. Attach power cord to outlet. Remove all cables ...

  • Boundless ADDS 3153 ASCII - page 9

    viii Preface Notices References in this publication to Boundless Technologies products, programs, or services do not imply that Boundless Technologies intends to make these available to all countries in which Boundless Technologies operates. Any reference to a Boundless Technologies product, program, or service is not intended to state or imply tha ...

  • Boundless ADDS 3153 ASCII - page 10

    Electronic Emission Notices ix Electronic Emission Notices Federal Communication Commission (FCC) Statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection aga inst harmful interference when the equ ...

  • Boundless ADDS 3153 ASCII - page 11

    x Preface Japanese Voluntary Control Council for Interference (VCCI) Statement This equipment is Class 1 Equipment (information equipment to be used in commercial and industrial districts) which is in conformance with the standard set by Voluntary Control for Interference by Data Processing Equipment and Electronic Office Machines (VC CI) with an a ...

  • Boundless ADDS 3153 ASCII - page 12

    Sa fety Notices xi Safety Notices Danger Notices A danger notice indicates a hazard that could possibly cause death or serious personal injury. The following danger notices are used throughout this manual. DANGER: To prevent a possible electrical shock when installing the device, ensure that the power cord for that device is unplugged before instal ...

  • Boundless ADDS 3153 ASCII - page 13

    xii Preface DANGER: Electrical current from power, telephone, and communication cables is hazardous. To avoid shock hazard, connect and disconnect cables as shown on the following page when installing, moving, or opening the covers of this product or attached devices. DANGER: The device’s switch is not the main disconne ct. The device’s main po ...

  • Boundless ADDS 3153 ASCII - page 14

    1 chapter 1 Introduction This terminal can emulate a number of ASCII and ANSI terminals, including IBM 3151, PC - Term and SCO™ Console. The keyboards supported by the terminal are the 101 - key extended PC (EPC), the 106 - key PC+, and the ANSI keyboards. The dual host capability of the terminal allows you to run two different applications simul ...

  • Boundless ADDS 3153 ASCII - page 15

    2 Introduction § PC Terminal § SCO™ - Console, AT386 § TVI™ - 925 Display § Dual session available in full or split screens § 100 Hz refresh rate (flicker - free) § Selectable overscan borders § Selectable screen saver § 26, 30, 44 or 52 row display with top and bottom status lines § 80 or 132 column display § Double high/double wide ...

  • Boundless ADDS 3153 ASCII - page 16

    Features 3 Physical Features 1. Keyboard Connector – Push in the keyboard connector here. 2. Tilt and Swivel Base – Use the tilt and swivel arrangement to adjust the viewing angle. Grasp the lower corners of the terminal and push up or down, or twist left or right. 3. Power Switch – “0” is off; “1” is on. Leave the terminal’s power ...

  • Boundless ADDS 3153 ASCII - page 17

    4 Introduction The cursor and edit keypads, located to the left of the numeric keypad, allows users to edit text and move around in the document. The communication key group, above the edit keypad, is used to control communications with the host or printer. The PC keyboard is configured as an IBM 3151 ASCII keyboard and is for use primarily with th ...

  • Boundless ADDS 3153 ASCII - page 18

    Features 5 104 - key PC Keyboard (US) ANSI Keyboard ...

  • Boundless ADDS 3153 ASCII - page 19

    6 Introduction Usage Notes The following notations and symbols are used in this manual: § Ctrl - F1 : the tw o keys, Ctrl and F1 , are to be pressed simultaneously. § Ctrl, F1 : the two keys, Ctrl and F1 , are to be pressed in succession. § 1 - num or 1 - alph : specifies that the number must be generated either from the numeric or the alphanume ...

  • Boundless ADDS 3153 ASCII - page 20

    Communications 7 Communications This terminal is equipped with three ports. The two serial ports are intended for connection to either a host/modem or a serial printer. The remaining port is a Centronics - compatible printer port. The port you use as the printer port depends on whether you have a serial or a parallel interface to the printer. Anoth ...

  • Boundless ADDS 3153 ASCII - page 21

    8 Int roduction Transmit Flow Control Likewise, the terminal will understand the Xon and Xoff requests from the host when it is transmitting data (provided the “EIA (or Aux) Xmt” is “Xon - Xoff” in Setup). This is referred to as “transmit” flow control. This terminal will stop transmitting data to the host or printer when it receives an ...

  • Boundless ADDS 3153 ASCII - page 22

    Communications 9 Host/Printer Port 1 (RS - 232 - C or RS - 422) This port, labeled “SES1 - EIA,” is designed for connection to the host (computer or modem) or a serial printer via a 25 - pin D - shell (DB25P) female connector. This port uses an RS - 232 - C communication interface, is configured as a DTE (Data Terminal Equipment) device, and ca ...

  • Boundless ADDS 3153 ASCII - page 23

    10 Introduction Host/Printer Port 2 This port, labeled “SES2 - AUX,” is designed to connect to a second host connection (computer or modem) or a serial printer, and can operate from 110 to 38,400 baud. This port uses an RS - 232 - C interface via a DB25P female connector, and is configured as a DCE (Data Communication Equipment) device. The pin ...

  • Boundless ADDS 3153 ASCII - page 24

    Communications 11 DTE SES1 EIA Modem Transmit Receive DTR DSR Transmit Receive DTR DSR pin2 pin3 pin20 pin6 pin2 pin3 pin20 pin6 D C E Host DCE SES2 AUX Modem D C E Host Receive Transmit DTR DSR Transmit Receive DTR DSR pin2 pin3 pin20 pin6 pin2 pin3 pin20 pin6 Terminal to Host (DTE) or Printer Refer to the diagram below to understand why a null mo ...

  • Boundless ADDS 3153 ASCII - page 25

    12 Introduction Screen Display and Pages This terminal offers a variety of screen lengths including 26, 30, 44, or 52 lines. These numbers include the top and bottom status lines (or label line), as well as the lines used to display data. A “page” of terminal memory represents the total number of lines that can be accessed, whether or not they ...

  • Boundless ADDS 3153 ASCII - page 26

    Communications 13 The figure below represents the entire page memory of a 48 line page (24 base page length times a multiplier of 2) and the portion of the page that is viewable on the display screen, when “26 Lines” is selected. Notice that the label line is visible in this mode. Visua l Effects of Screen and Page Lengths The combination of pa ...

  • Boundless ADDS 3153 ASCII - page 27

    14 Introduction If the current page or portion of the page is longer than the screen display or window in which it is displayed, then local keystrokes can be used to “pan” the window up or down ( Ctrl - ↑ and Ctrl - ↓ ). As a window is panned up, the page appears to be moving down and the opposite is true when panning the window down. Text ...

  • Boundless ADDS 3153 ASCII - page 28

    17 chapter 2 Installation This section provides a “walk - through” approach to the installation of your terminal. This will enable you to physically connect the terminal to a printer and one or two host computer(s)/mod em(s), as well as to configure the Setup menu to suit your requirements and preferences. The terminal is designed to provide gr ...

  • Boundless ADDS 3153 ASCII - page 29

    18 Installation STEP 3 – Number of Sessions Selection This step requires setting a selection in the Setup menu to configure the terminal for single or dual session mode. If you’ve connected two host cables (A or C AND B or D ), and you wish to run in “dual session” mode, enter Setup and set “Sessions=Two” in the Quick (F1) menu. For sin ...

  • Boundless ADDS 3153 ASCII - page 30

    STEP 5 – No Printer Option 19 Note that it is not general practice to assign the h ost port in one session as the printer port in another session, but this can be done if desired. If RS - 422 daughter board is installed in the EIA port, it cannot be used with a printer. STEP 5 – No Printer Option If you did not opt to install a printer (did not ...

  • Boundless ADDS 3153 ASCII - page 31

    20 Installation Connection B: Host DTE 1. Enter the Setup menu. If the Aux port is to be assigned to Session 2, then switch sessions ( Ctrl - Enter ( num )). Remain in session 1, if it is to be assigned to that session. 2. In the Setup Quick (F1) menu, set the Host portion of the “Host/Printer” selection to “Aux” without changing the curren ...

  • Boundless ADDS 3153 ASCII - page 32

    STEP 8 – Emulation Setup Sel ection 21 STEP 8 – Emulation Setup Selection This step requires setting a selection in the Setup menu to configure the “Emulation” for one or two sessions of the terminal. Determine which emulations your applications run with. Enter the Setup menu and set the “Emulation” parameter, in the Quick (F1) menu, to ...

  • Boundless ADDS 3153 ASCII - page 33

    22 Installation Common Setups EIA PAR AUX TERMINAL H O S T DTE PARALLEL PRINTER B H Sessions =One Host/Printer =EIA/Para EIA Baud, EIA Data Format , etc. matches the host EIA PAR AUX TERMINAL H O S T O N E DTE A H O S T T W O DTE B Sessions =Two Se ssion1 Host/Printer =EIA/None Session2 Host/Printer =Aux/None EIA Baud , etc. matches host 1 Aux Baud ...

  • Boundless ADDS 3153 ASCII - page 34

    Host/Printer Connection Guide 25 SES1 - EIA (DTE) SES2 - AUX (DCE) PAR DTE Host* Connection A: Connect a null modem adapter between the host cable and the EIA port. Connection B: Connect the host cable directly to the AUX port. Not applicable. DCE Host or Modem Connection C: Connect the host or modem cable directly to the EIA port. Connection D: Co ...

  • Boundless ADDS 3153 ASCII - page 35

    26 Installation SES1 - EIA (DTE) SES2 - AUX (DCE) PAR DTE Serial Printer ** Connection E: Connect a null modem adapter between the serial printer cable and the EIA port. Connection F: Connect the serial printer cable directly to the AUX port. Connection G: This is an option if you connect a parallel - to - serial converter between the serial printe ...

  • Boundless ADDS 3153 ASCII - page 36

    User Settings 27 Connections made Number of sessions Host/Printer (Session 1)* Host/Printer (Session 2)* Emulatio ns (Session 1) Emulations (Session 2) C, D, and H 2 EIA/Para Aux/None IBM 3151 ADDS VP Host 1: Baud Data Bits Stop Bits Parity Parity Check Flow Control (In)** Flow Control (Out)*** Modem Control 9600 8 1 None Off Xon - Xoff Xon - Xoff ...

  • Boundless ADDS 3153 ASCII - page 37

    27 chapter 3 Setup The Setup menu is your control panel for this terminal. It permits you to configure the terminal to communicate with the host computer as well as to suit your personal preferences. Overview The Setup menus have been designed to allow maximum flexibility with a minimum investment of time. Thirteen menus provide you with the flexib ...

  • Boundless ADDS 3153 ASCII - page 38

    28 Setup Saving Parameters Upon exiting setup mode, the prompt “Save All (Y/N)” blinks. Press Y or y to exit setup and save settings in permanent (nonvolatile) RAM. Press C or c to cancel the exit request. Press N or n to exit Setup. The changes will take effect, but will be lost if the terminal is reset or powered off. An ex ception to this is ...

  • Boundless ADDS 3153 ASCII - page 39

    Overview 29 The following keystrokes are also available but are not documented in the Setup help bar. Tab and Shift - Tab: Move from menu to menu forward or b ackward without using function keys. Space and Shift - Space: Cycle through the list of choices. Same as Enter and Shift - Enter. Parameters that are changed are executed as soon as that fiel ...

  • Boundless ADDS 3153 ASCII - page 40

    30 Setup Setup Map Key Menu Parameters Available (Not a ll will display for a given emulation, keyboard, or video mode) F1 Quick Emulation Comm Mode EIA Baud Rate Enhanced Language Aux Baud Rate EIA Data Format Host/Printer Sessions Aux Data Format F2 General Emulation Enhanced Auto Wrap Auto Font Lo ad Auto Page Auto Scroll Monitor Mode Screen Sav ...

  • Boundless ADDS 3153 ASCII - page 41

    Setu p Map 31 Key Menu Parameters Ava ilable (Not all will display for a given emulation, keyboard, or video mode) F7 Host Comm Mode Local Recv <CR> Recv <DEL> Send ACK Send Line Term Send Block Term Send Region Send End Null Suppress Alt Input Data Break Line Control Disconnect Turnar ound Char Send Null Suppress Ignore CTS Modem Contr ...

  • Boundless ADDS 3153 ASCII - page 42

    32 Setup QUICK: F1 F1 Quick F2 Genrl F3 Disp F4 Kybd F5 Keys F6 P orts F7 Host F8 Print F9 Emul F10 Tabs F11 AnsBk F12 Prog Print Exec Parameters Emulation=IBM 3151 EIA Baud Rate=9600 EIA Data Format=8/1/N Enhance=On Aux Baud Rate=9600 Aux Data Format=8/1/N Comm Mode=Full Duplex Language=U.S. Sess ions=One Host/Printer=EIA/Para Choices ADDS VP Wyse ...

  • Boundless ADDS 3153 ASCII - page 43

    GENERAL: F2 33 Enhanced: [ On , Off] Normally, the terminal responds to a set of commands that correspond to the emulation selected. When Enhanced mode is on , th e set of commands is extended to those printed in boldface in the Programming chapter. EIA Data Format: [ 7/1/N, 7/1/O, 7/1/E, 7/1/M, 7/1/S, 7/2/N, 7/2/O, 7/2/E, 7/2/M, 7/2/S, 8/1/N , 8/1 ...

  • Boundless ADDS 3153 ASCII - page 44

    34 Setup Emulation: Select the “personality” of the terminal. See the Quick menu earlier in this chapter. Enhanced : Choose whether the termin al can respond to commands beyond the limitations of the current emulation. See the Quick menu earlier in this chapter. Auto Wrap : [ On , Off] Select whether the cursor drops to the next line when it re ...

  • Boundless ADDS 3153 ASCII - page 45

    DISPLAY: F3 35 case of a full display, toggling also brings the entire display of the selected host into view. The selection above is not available in the IBM 3151 emulation. Bell Length: [ 140 ms , 350 ms, 570 ms, 780 ms] Denotes duration of bell sound. Setup Lang: [ US , French, German, Italian, Spanish, Portuguese] Affects display of setup and t ...

  • Boundless ADDS 3153 ASCII - page 46

    36 Setup Columns: [ 80, 132, 80 - Only] Choose the number of columns that the screen can d isplay. 80 - Only provides more pages in memory for a given page length by disallowing changes to 132 - column display. Width Change Clear : [On, Off ] Select whether the screen is to be cleared when the number of columns on the screen is changed from 80 to 1 ...

  • Boundless ADDS 3153 ASCII - page 47

    KEYBOARD: F4 37 Viewport 2 Bottom Row [ 20 ] 2 through page length minus 1. This specifies the last row number of the second viewport. This parameter displays in Setup when number of viewports is greater than 2. Pages [ 1 - 8 ] Select the number of pages the use r can access. The maximum number of pages is dependent on the page length. The number o ...

  • Boundless ADDS 3153 ASCII - page 48

    38 Setup Keyboard Layout: [ Q , F] This selection is only available wh en Turkish keyboard is selected. Q and F refer to the two Turkish keyboard layouts available. Q and F correspond to the top left key on the alphanumeric keypad. Margin Bell: [On, Off ] Choose whether a bell tone sounds when the cursor is nine positions awa y from the right margi ...

  • Boundless ADDS 3153 ASCII - page 49

    KEYS: F5 39 Pound Key: [ U.S. , British] Choose the character transmitted for 23h — the US pound (#) or the British pou nd (£). Return Key Repeat: [On, Off] Select whether the Return key located on the alphanumeric keypad will repeat when held down for more than half a second (only selectable when “Key Repeat” = On ). ...

  • Boundless ADDS 3153 ASCII - page 50

    40 Setup Return Key: [Field, New Line ] When the Return Key = Ne w Line , the functions specified in the New Line parameter are performed. When the Return Key = Field , the functions specified in the New Line parameter are performed unless the target line is within a protected field. The cursor will then move to the first character position of the ...

  • Boundless ADDS 3153 ASCII - page 51

    KEYS: F5 41 window; selections for the specific accessory can be made from that menu by pressing F1 - F5. The Sh - Ctrl - Fkeys option, when selected, allows direct access to desk accessories (bypassin g the menu) by pressing Sh - Ctrl - F1 through Sh - Ctrl - F5. Selecting Disabled will inhibit entry to desk accessories. Once a desk accessory is d ...

  • Boundless ADDS 3153 ASCII - page 52

    42 Setup PORTS: F6 EIA Baud Rate: [1 10, 150, 300, 600, 1200, 1800, 2000, 2400, 4800, 9600 , 19200, 38400, 57600, 768000, 115200, 134400] See the Quick menu earlier in this chapter. EIA Data Format: [7/1/N, 7/1/O, 7/1/E, 7/1/M, 7/1/S, 7/2/N, 7/2/O, 7/2/E, 7/2/M, 7/2/S, 8/1/N , 8/1/O, 8/1/E, 8/1/M, 8/1/S, 8/2/M, 8/2/N, 8/2/O, 8/2/E, 8/2/S] See the Q ...

  • Boundless ADDS 3153 ASCII - page 53

    HOST: F7 43 HOST: F7 Break: [ 250 ms , 170 ms, 500 ms, Off] Choose the duration of the break signal in milliseconds. This is an interruption in data flow, and can be disabled. Modem Control: [On, Off ] If a modem is being us ed to communicate with the primary or secondary host, modem control should be on. To perform a disconnect, the terminal drops ...

  • Boundless ADDS 3153 ASCII - page 54

    44 Setup Choose whether the terminal sends data from the entire screen or from the scrolling region. Ignore CTS: [Off , On ] Ignore CTS is not displayed in IBM 3151 emulations Line Control: [ CRTS, PRTS, IPRTS ] § PRTS* (permanent request to send) – P RTS handles the CTS and DSR signal as modem signals. § IPRTS* (induced permanent request to se ...

  • Boundless ADDS 3153 ASCII - page 55

    EMULATION: F9 45 Print: [National, Line Drawing, Multinational] Choose the set of characters use d when printing. Print Region: [ Screen , Scroll] Indicate the region of the screen that is to be printed: the entire screen or a certain section of it called the scrolling region. A scrolling region is a limited portion of the screen which applications ...

  • Boundless ADDS 3153 ASCII - page 56

    46 Setup available for programmi ng in fast mode. Changing this selection will default all function keys, edit keys, and function keys labels. ...

  • Boundless ADDS 3153 ASCII - page 57

    EMULATION: F9 47 Save Labels: [Off, On ] When on , labels that are downloaded by the host will be saved in non - volatile memory. If this selection and Display NV La bels are off , labels written by the host would be lost upon entry and exit to Setup. Attribute: [ Char , Line, Page] Choose the extent to which attributes are propagated. (The only pa ...

  • Boundless ADDS 3153 ASCII - page 58

    48 Setup Bright Video: [Off, Mode 1 , Mode 2] Provides a brighter display when set to Mode 1 or Mode 2. In Mode 1, both normal and dim text are brighter than in the standard mode. In Mode 2, only normal text is brighter, resulting in a greater contrast between normal and dim text. This parameter setting affects both sessions, but will not affect an ...

  • Boundless ADDS 3153 ASCII - page 59

    EM ULATION: F9 49 lines and the previous current line moves down one line. The bottom line is then discarded. § Character – If there is no space to insert a character and an insert character operation is requested, a character can be inserted at the cursor position. However, the last character of the current line is discarded when the line wrap ...

  • Boundless ADDS 3153 ASCII - page 60

    50 Setup TABS: F10 F1 Quick F2 Genrl F3 Displ F4 Kybd F5 Keys F6 Ports F7 Host F8 Print F9 Emul F10 Tabs F11 AnsBk F12 Prog Print Exec Parameters Auto Init Tabs = Off Default Tabs Tab=Field 10 20 30 40 50 60 ....:.... ↓ ....:.... ↓ ....:.... ↓ ....:.... ↓ ....:.... ↓ ....:.... ↓ ....:. 70 80 90 100 110 120 130 ... ↑ ....:.... ↑ .... ...

  • Boundless ADDS 3153 ASCII - page 61

    ANSWERBACK: F11 51 ANSWERBACK: F11 F1 Quick F2 Genrl F3 Displ F4 Kybd F5 Keys F6 Ports F7 Host F8 Print F9 Emul F10 Tabs F11 AnsBk F12 Prog Print Exec Parameters Answerback Mode = Off Anwerback Conceal Answer back Message:____________________________________ Bytes Remaining: 0542 Choices Off On Select ↑ → ↓ ← : Parameter Enter/S - Enter : N ...

  • Boundless ADDS 3153 ASCII - page 62

    52 Setup PROGRAM: F12 F1 Quick F2 Genrl F3 Displ F4 Kybd F5 Keys F6 Ports F7 Host F8 Print F9 Emul F10 Tabs F11 AnsBk F12 Prog Print Exec Param eters Keys = F1 Program = FKey Key Dir = Host Text: _________________________________________________________________________ _________________________________________________________________________ ______ ...

  • Boundless ADDS 3153 ASCII - page 63

    PROGRAM: F12 53 Label: A label of up to 7 characters can be entered for function ke ys in ASCII emulations only. See “Display NV Labels” in the Emulation section. < Backspace > – delete < Shift > < Back > – default field Key: Select the key to be programmed. The keys that are listed as choices depend upon the Program param ...

  • Boundless ADDS 3153 ASCII - page 64

    54 Setup EXECUTE: Prnt Sc F1 Quick F2 Genrl F3 Displ F4 Kybd F5 Keys F6 Ports F7 Host F8 Print F9 Emul F10 Tabs F11 AnsBk F12 Prog Print Exec Parameters Save Terminal Reca ll Terminal Default Terminal Save Session Recall Session Default Session Reset Terminal Reset Session Reset Ports Clear Screen Default Session UDKs Choices User Enter Key to Exec ...

  • Boundless ADDS 3153 ASCII - page 65

    Edit Fields 55 Edit Fields Setup uses overwrite mode in text editing fields. That is, the cursor keys cannot be used to move to a location in the text t o insert characters. Upon entry to a text field, the cursor is placed at the last text location. Use the following keystrokes: Backspace – Move cursor left by deleting that character. Shift - Bac ...

  • Boundless ADDS 3153 ASCII - page 66

    56 Setup Glossary of Terms Some of the terms that are used in the Exec (PrtSc) menu are defined below. Terminal Parameters Terminal parameters includes session parameters (defined later) and n on - session parameters that affect the terminal globally without regard to the session. The non - session parameters and their defaults are listed below: Se ...

  • Boundless ADDS 3153 ASCII - page 67

    Glossary of Terms 57 Session Para meters Session Parameters are parameters that are specific to the emulation selected in the current session. These include three types of parameters: Setup - Edit keys, Setup, and Modes. Setup - Edit Keys: Function and Edit keys and the Answerback message. Set up Parameters: All other Setup variables that are not i ...

  • Boundless ADDS 3153 ASCII - page 68

    61 chapter 4 Desk Accessories This terminal features five desk accessories, which can be accessed one at a time through pop - up windows. Overview Desk Accessory Menu To display this pop - up window to choose any of the f ive desk accessories, press Ctrl - ← . Function keys F1 - F5 are used to display the clock, calendar, calculator, ASCII chart, ...

  • Boundless ADDS 3153 ASCII - page 69

    Overview 62 Direct Access To display any desk accessory directly, without the desk accessory menu, the following keystrokes are used: § Clock – press Ctrl - Shift - F1 § Calendar – press Ctrl - Shift - F2 § Calculator – press Ctrl - Shift - F3 § ASCII Chart – press Ctrl - Shift - F4 § Diagnostic Menu – press Ctrl - Shift - F5 You may ...

  • Boundless ADDS 3153 ASCII - page 70

    Calendar 63 Calendar This displays a calendar for any month from the years 1900 to 2099. The current date is displayed at the bottom. The keys below control the calendar that is displayed: § Right - and le ft - arrow keys – Display an earlier or later month. § Up - and down - arrow keys – Display the selected month in an earlier or later year ...

  • Boundless ADDS 3153 ASCII - page 71

    Calculator 64 Date – Use the left or right arrow keys to highlight each field of the date (month, day, and year). Then use the Spacebar or Shift - Spacebar to cycle through the settings. The date can also be set by the host. Time – Use the procedure describe d for Date above to set the hour, minutes, or seconds. The clock is reset to 08:00 AM a ...

  • Boundless ADDS 3153 ASCII - page 72

    57 Calculator Display (EPC keyboard) Calculator Display (PC+ keyboard) In addition to the keys on the numer ic keypad, you may use: § T – Toggle “tape” on/off. Results scroll above the display. § P – Toggle “printer” on/off. Results are transmitted onto the printer. Use the printer option only when a printer is connected. Press Ctrl - ...

  • Boundless ADDS 3153 ASCII - page 73

    66 Desk Accessories § X – Exit the calculator, transmitting the final result to the current application. (Shift - X transmits the result with no leading or trailing spaces). § Ctrl - (a number on the numeric keypad) – Specify the precision, where the number of decimal places t hat will be displayed is equal to the number pressed with the Ctrl ...

  • Boundless ADDS 3153 ASCII - page 74

    Diagnostic Menu 67 Diagnostic Menu This desk accessory is used to display terminal configuration information such as the amount of memory (RAM) in the terminal, the style of keyboard that you are using, and the firmware revision level. An example of the diagnostic menu is shown below: 265 Screen RAM Character 32K P0000 Attribute 32K P0000 CGEN RAM ...

  • Boundless ADDS 3153 ASCII - page 75

    69 A Appendix Local Keys Action Scan Code Mode PC Keyboard ANSI Keyboard Toggle Caps - Lock No Lock Lock Toggle Num - Lock No Num - Lock Toggle Scroll - Lock 1 No Scroll - Lock F1 Toggle Auto Print 2 Yes Ctrl - Print - Screen C trl - F2* Toggle Block - Mode Yes Ctrl - Shift - Pause F4* Toggle Monitor Mode Yes Ctrl - Shift - 1 End Ctrl - Shift - 1 ...

  • Boundless ADDS 3153 ASCII - page 76

    Local Keys 70 Continued Action Scan Co de Mode PC Keyboard ANSI Keyboard Increment Scroll Rate 7 Yes Ctrl - Shift - ↑ Ctrl - Shift - ↑ Decrement Scroll Rate 7 Yes Ctrl - Shift - ↓ Ctrl - Shift - ↓ Raise Split 8 Yes Ctrl - – (num) Ctrl - – (num) Lower Split 8 Yes Ctrl - , (num) Ctrl - , (num) Split - Full Toggle 8 Yes Ctrl - Shift - – ...

  • Boundless ADDS 3153 ASCII - page 77

    Local Keys 71 In Scan Code Mode, this chart applies only when Local Leadin is on. ...

  • Boundless ADDS 3153 ASCII - page 78

    Local Keys 72 NOTES: 1 This function is operational only if EIA (Aux) Rcv - Prtcl = Xon - Xoff/XPC or DTR. 2 In ANSI emulations, this keystroke toggles in and out of Auto Print Mode. 3 This function is operational even if Screen Saver is set to off . 4 This function unlocks the keyboard, turns off all pr int modes and re - initializes the serial po ...

  • Boundless ADDS 3153 ASCII - page 79

    Page Configurations — Single and Dual Session 73 Page Configurations — Single and Dual Session Number of Pages Single Session Dual Session Lines per Page 80/132 80 - only 80/132 80 - only 24 48 96 192 *24 8 4 2 1 2 (24/176) 10 5 2 1 2 (24/216) 4 2 1 - 2 (24/76) 4 2 1 - 2 (24/96) 25 50 100 200 *25 8 4 2 1 2 (25/175) 9 4 2 1 2 (25/215) 4 2 1 - 2 ...

  • Boundless ADDS 3153 ASCII - page 80

    75 chapter 1 User’s Notes ...

  • Boundless ADDS 3153 ASCII - page 81

    NOTE TO INSTALLER This equipment complie s with the FCC Regulation for Class A devices, Subpart J of Part 15. Shielded, grounded interface cables were used on all ports for FCC radiated emission testing. The manufacturer is not responsible for any violation of the FCC Regulation for Class A devices that is caused by unauthorized modification of the ...

  • Boundless ADDS 3153 ASCII - page 82

    Technical Support Questions about this product should be directed to the Technical Support Department of the distributor from which you obtained your Boundless Technologies equipment. When requesting assistance, please have all pertinent information available including any error messages that may have appeared either on the terminal or the host. If ...

Fabbricante Boundless Categoria Stereo System

I documenti che otteniamo dal fabbricante del dispositivoBoundless ADDS 3153 ASCII possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Boundless
- manuali per l’uso ADDS 3153 ASCII
- schede prodotto Boundless
- opuscoli
- o etichette energetiche Boundless ADDS 3153 ASCII
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Boundless ADDS 3153 ASCII.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Boundless ADDS 3153 ASCII, manuali di manutenzione, brevi manuali o manuali utente Boundless ADDS 3153 ASCII. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Boundless ADDS 3153 ASCII.

Manuali per l’uso simili

Manuale completo del dispositivo Boundless ADDS 3153 ASCII, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Boundless ADDS 3153 ASCII dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Boundless ADDS 3153 ASCII.

Il manuale per l’uso completo Boundless, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Boundless ADDS 3153 ASCII - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Boundless ADDS 3153 ASCII, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Boundless ADDS 3153 ASCII che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Boundless ADDS 3153 ASCII - che ci dovrebbe aiutare nei primi passi durante l'uso Boundless ADDS 3153 ASCII
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Boundless ADDS 3153 ASCII
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Boundless ADDS 3153 ASCII in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Boundless ADDS 3153 ASCII?

Utilizza il modulo sottostante

Se non hai risolto il problema con Boundless ADDS 3153 ASCII con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Boundless ADDS 3153 ASCII è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)