Manuale per l’uso Hotpoint BFI 670

20 pagine 1.08 mb
Scarica

Vai alla pagina of 20

Summary
  • Hotpoint BFI 670 - page 1

    Instruction booklet DISHWASHER Contents Installation, 2-5 Positioning and levelling T echnical data Electrical connection Connecting the water supply Description of the appliance, 6 Overall view Control panel Loading the racks, 7 Lower rack Cutlery basket Upper rack Start-up and use, 8 Starting the dishwasher Loading the detergent W ashing options ...

  • Hotpoint BFI 670 - page 2

    2 EN Positioning and levelling 1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. 2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabi ...

  • Hotpoint BFI 670 - page 3

    3 EN  The dishwasher meets the requirements set out by the regulations in for ce concerning safety and electrical equipment.  Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user . ...

  • Hotpoint BFI 670 - page 4

    4 EN Connecting the water supplies  Connection to the water and electricity supplies should only be perfor med by a qualified technician.  The dishwasher should not stand on top of the water hoses or the electricity supply cable. Connecting the water inlet hose The water inlet (A) and outlet (B) hoses and the electricity supply cable may be p ...

  • Hotpoint BFI 670 - page 5

    5 EN Anti-flooding protection* T o ensure floods do not occur , the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance. - is provided with a W ater Stop * safety device, in other words it has a water inlet hose that consists of a transparent hose on the outside ...

  • Hotpoint BFI 670 - page 6

    6 EN Overall view 1. Upper rack 2. Upper sprayer arm 3. Tip-up compartments 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Cutlery basket 8. W ashing filter 9. Salt dispenser 10. Detergent and rinse aid dispensers 11. Data plate * Only available in selected models. 3 1 Description of the appliance 4 6 9 11 2 7 8 10 5 WASH CYCLE indic ...

  • Hotpoint BFI 670 - page 7

    7 EN If the rack is equipped with the click clack handles* ( see figure ), pull them upwards or downwards to adjust the height. Loading examples for the upper rack Loading examples for the lower rack Baby Tip-up compartments ** For dishwasher models with a Baby Cycle, tip-up compartments which are suitable for washing bottles, rings and teats are p ...

  • Hotpoint BFI 670 - page 8

    8 EN Starting the dishwasher 1. T u rn the water tap on. 2. Open the door and press the ON/OFF button: the indicator light will illuminate. 3. Measure out the detergent (see below). 4. Load the racks (see Loading the racks). 5. Select the programme by pressing the WASH CYCLE SELECT button; the corresponding indicator light will illuminate. 6. Selec ...

  • Hotpoint BFI 670 - page 9

    9 EN Wash cycle table Note T o make it easier to measure out the detergent, it is worth remembering that: 1 tablespoon = 15 grams of powder = approximately 15 ml of liquid 1 teaspoon = 5 grams of powder = approximately 5 ml of liquid  Ariston dishwashers are fitted with an automatic filter cleaning system that may increase the cycle duration. Wa ...

  • Hotpoint BFI 670 - page 10

    10 EN  Only use products that have been specifically designed for dishwashers. Do not use table salt or industrial salt.  If using a multi-functional product (2-in-1, 3-in-1, 4-in-1, etc.) it is not necessary to add rinse aid; however , we reco mmend that you add salt, especially if you live in an area where the water is hard or very hard. If ...

  • Hotpoint BFI 670 - page 11

    11 EN Shutting off the water and electricity supplies • T ur n off the water tap after ever y wash cycle to avoid leaks. • Remove the plug fr om the socket when cleaning the machine and when carr ying out maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel may be cleaned using a non- abrasive ...

  • Hotpoint BFI 670 - page 12

    12 EN  The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety r easons and should therefore be read car efully . General safety • The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use ...

  • Hotpoint BFI 670 - page 13

    13 EN * Only available in selected models. Phosphate-free and chlorine-free detergents containing enzymes • We str ongly recommend that you use detergents that do not contain phosphates or chlorine, as these products ar e har mful to the environment. • Enzymes provide a particularly effective action at temperatures ar ound 50°C, and as a resul ...

  • Hotpoint BFI 670 - page 14

    14 EN Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance ( see Assistance ). Troubleshooting Malfunction: Possible causes / Sol utions: The dis hwas her do es not s tart.  The plug has not be en inserted i nto the electrical socket properly , or there i s no power i n the house.  ? ...

  • Hotpoint BFI 670 - page 15

    15 EN Load for 12 Standard Settings tests (upper rack at top position) INFORMATION FOR TEST LABS C F Comp.3 Comp.2 Loading the Rinse Aid The amount of rinse aid used for each cycle can be regulated by turning the dose adjuster ‘ F ’ which you will find under lid ‘ C ’ . There are 6 different settings; the nor mal dosage is setting 5. This b ...

  • Hotpoint BFI 670 - page 16

    16 EN After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We ar e the largest service team in Europe offering you access to 400 skilled telephone advisors and 1100 fully qualified engineers on call to ensur e ...

  • Hotpoint BFI 670 - page 17

    17 EN Guarantee 12 Months Parts and Labour Guarantee Y our appliance has the benefit of our manufacturer’ s guarantee, which covers the cost of breakdown repairs for twelve months fr om the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or material ...

  • Hotpoint BFI 670 - page 18

    18 EN Notes ...

  • Hotpoint BFI 670 - page 19

    19 EN Notes ...

  • Hotpoint BFI 670 - page 20

    20 EN 195058373.00 06/2006- Xerox Business Services Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance. If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also provided so t he ...

Fabbricante Hotpoint Categoria Dishwasher

I documenti che otteniamo dal fabbricante del dispositivoHotpoint BFI 670 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Hotpoint
- manuali per l’uso BFI 670
- schede prodotto Hotpoint
- opuscoli
- o etichette energetiche Hotpoint BFI 670
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Hotpoint BFI 670.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Hotpoint BFI 670, manuali di manutenzione, brevi manuali o manuali utente Hotpoint BFI 670. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Hotpoint BFI 670.

Manuali per l’uso simili

Manuale completo del dispositivo Hotpoint BFI 670, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Hotpoint BFI 670 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Hotpoint BFI 670.

Il manuale per l’uso completo Hotpoint, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Hotpoint BFI 670 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Hotpoint BFI 670, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Hotpoint BFI 670 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Hotpoint BFI 670 - che ci dovrebbe aiutare nei primi passi durante l'uso Hotpoint BFI 670
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Hotpoint BFI 670
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Hotpoint BFI 670 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Hotpoint BFI 670?

Utilizza il modulo sottostante

Se non hai risolto il problema con Hotpoint BFI 670 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Hotpoint BFI 670 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)