-
StarTech.com SV831DUSB - page 1
Professional USB Console KVM Switch 4/8/16 - P ort 1U Rack Mount USB and PS/2 KVM Switch with OSD SV431DUSB SV831DUSB SV1631DUSB Instruction Manual ...
-
StarTech.com SV831DUSB - page 2
FCC Compliance Statement This equipment has been tested and f ound to comply with the limits f or a Class B digital device , pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf erence in a residential installation. This equipment generates, uses and can radiate radio frequency ener ...
-
StarTech.com SV831DUSB - page 3
i T able of Contents Introduction ..................................................................... 1 P ackaging Contents..................................................................... 1 System Requirements ................................................................. 1 Installation .................................................... ...
-
StarTech.com SV831DUSB - page 4
1 Introduction Thank you f or purchasing a StarT ech.com Professional USB Console KVM Switch. This product offers a reliab le and efficient way to manage multiple computers in server rooms, or an y other environment where space is at a premium. The switch f eatures an on-screen display that allows comprehensiv e monitoring of computer naming and s ...
-
StarTech.com SV831DUSB - page 5
2 Inst allation NO TE: Prior to the installation, please power off all de vices that will be connected to this system. Ensure that all devices y ou will connect are proper ly grounded. Place cables a wa y from fluorescent lights, air conditioners, and machines that are likely to generate electrical noise. Console Installation The SV831DUSB and SV1 ...
-
StarTech.com SV831DUSB - page 6
3 USB Keyboar d and USB Mouse: Slide switch to the f ar right position. NO TE: When configuring the switch as a Slav e in a cascaded configuration, PS/2 K eyboard and Mouse is the only mode that can be used. Therefore , SV431DUSB cannot be configured as a slav e in a cascaded setup , as it does not provide a slide s witch selector . Computer Ins ...
-
StarTech.com SV831DUSB - page 7
4 PS/2 Computer T o connect a computer controlled through PS/2, use a StarT ech.com 3-in-1 Ultra-Thin PS/2 KVM cable (Product ID: SVECON ) to connect from one of the PC por ts to the PS/2 ke yboard and mouse, as well as the VGA port of the computer system. Cascaded congurations NO TE: The master must have equal or more PC ports than that of the ...
-
StarTech.com SV831DUSB - page 8
5 The maximum number of computers controlled b y a Master/Slav e configuration with all 8-port units is 64, with 8 Slaves and each Sla ve connecting to 8 computers: The maximum number of computers controlled in a Master/Sla ve configuration with all 16-port units is 136, with 8 units of 16-por t Sla ves (to PC 1 - PC 8) and each Slav e connected ...
-
StarTech.com SV831DUSB - page 9
6 PC 1 to PC 8 por t connections from a computer to a Slav e KVM switch or vice versa, or replace the de vices of a por t, the OSD will update this change the next time it is activ ated. Operation Y ou ma y select a computer by pressing the front panel push button directly , by issuing hot-ke y commands or by activating the OSD window . The front p ...
-
StarTech.com SV831DUSB - page 10
7 OSD (On Screen Display ) Operation By hitting the left < CTRL > ke y twice within two seconds, y ou may see the ’Hotke y Menu’ if it is enabled (an OSD option). Or, b y hitting the left < CTRL > ke y three times within two seconds, y ou will see a ’KVM MENU’ screen showing a list of the computers with corresponding channel add ...
-
StarTech.com SV831DUSB - page 11
8 Use the < UP > and < DO WN > arrow keys to highlight a computer and the < ENTER > ke y to select it. Or , you ma y press < ESCAPE > to exit OSD and remov e the OSD menu from the displa y; the status window returns to the display and indicates the currently selected computer or operating status. A triangle mark ( ► ) to t ...
-
StarTech.com SV831DUSB - page 12
9 a Slav e). T o lock a device , use the < UP > and < DO WN > arrow keys to highlight it, then press < F3 >. Now , enter up to 4 characters (‘A’~’Z’, ‘0’~’9’, ‘-’) follo wed by < ENTER > as new pass word. A Security enabled de vice is marked with a lock ( Ï ) f ollowing its channel number . T o permanent ...
-
StarTech.com SV831DUSB - page 13
10 or , press any front button. Scan T ype and Scan Rate set the scan pattern. Scan T ype (< F4 >: MoreScan T ype) determines if scanned computers must also be ey e mar k selected. Scan Rate(< F4 >: More Scan Rate) sets the display interval when a computer is selected before selecting the ne xt one. Manual Scan Scan through power-on c ...
-
StarTech.com SV831DUSB - page 14
11 CH Display: After you select a computer , the channel address and name Auto Off: of the computer will appear on the screen for 3 seconds then disappear automatically . The channel address and name of a selected computer Always On: and/or OSD status display ed on the screen all the time. The non-volatile memory stores the CH Display setting. The ...
-
StarTech.com SV831DUSB - page 15
12 entitled Sun K eyboard Mapping f or fur ther detail. NO TE: It is unnecessar y to s witch the Sun mark ON or OFF if an authentic Sun ke yboard is being used on the console. In other words, you must ensure that the Sun-mark ed por t has not been selected if you are already using a Sun ke yboard. With different types of k eyboard and computer , th ...
-
StarTech.com SV831DUSB - page 16
13 computer connected to a Slav e, two characters represent its por t. The first character is the port number of the Master unit (1~8) and the second one is the por t number of the Slav e (1~8 or A~H). Please note that only the Master’ s ‘PC1’ ~ ‘PC8’ por ts can be connected to a Sla ve . EXAMPLES: Left <CTRL> , Left <CTRL>, ...
-
StarTech.com SV831DUSB - page 17
14 The switch will beep one to f our times indicating the scan inter val of 3, 8, 15 and 30 seconds respectively . T o adjust ke yboard typematic rate (characters/sec) for PS/2 k eyboards: Left <CTRL>, Left <CTRL>, <F4> The KVM switch beeps 1 to 4 times corresponding to 10, 15, 20 and 30 characters/sec respectiv ely . Sun/Mac Keyb ...
-
StarTech.com SV831DUSB - page 18
15 “ Help ” function in Sun: Press r ight < CTRL > and release, then within 2 seconds, press < H >. Standard Ke yboard Map to Sun Keyboar d Map to Mac Keyboar d right <CTRL>, <1> right <CTRL>, <2> right <CTRL>, <3> right <CTRL>, <4> P ower right <CTRL>, <F1> Stop right < ...
-
StarTech.com SV831DUSB - page 19
16 Specications SV431DUSB SV831DUSB SV1631DUSB Number of Ports 4 8 16 Console Connectors 2 x USB type A female 1 x DE-15 VGA female 2 x USB type A female 1 x PS/2 female 1 x DE-15 VGA female 2 x USB type A female 1 x PS/2 female 1 x DE-15 VGA female Computer Connectors (per port) 1 x DE-15 female LEDs 1 x P ower 4 x P or t Selection/P ower 1 x P ...
-
StarTech.com SV831DUSB - page 20
17 T echnical Suppor t StarT ech.com’ s lifetime technical suppor t is an integral par t of our commitment to provide industry-leading solutions. If you e ver need help with your product, visit www .star tech.com/suppor t and access our comprehensive selection of online tools , documentation, and downloads. Warranty Information This product is ba ...
-
StarTech.com SV831DUSB - page 21
StarT ech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans man y channels, including gov er nment, education and industrial f acilities to name just a f ew . We offer an unmatched selection of computer par ts , cables , A/V products, KVM and Ser ver Management ...
Hai una domanda su StarTech.com SV831DUSB?
Utilizza il modulo sottostante
Se non hai risolto il problema con StarTech.com SV831DUSB con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con StarTech.com SV831DUSB è probabile che voglia condividere il modo di risolverlo.