Italiano dropdown-ico

Manuale per l’uso POSline ITT4100

34 pagine Non applicabile
Scarica

Vai alla pagina of 34

Summary
  • POSline ITT4100 - page 1

    ITT4100 POSline® Thermal T ransfer Printer User's Manua l ...

  • POSline ITT4100 - page 2

    ...

  • POSline ITT4100 - page 3

    2. Power Supply 3. Parts and Features WARNING: NEVER OPERATE TH E PRINTER AND POWER SU PPLY IN AN AREA WHERE THEY CAN GET WET. 1. The Power Adapter has a barrel connector on one end that must be inserted into the power jack on the back of the printer. 2. Plug the other end of the cord into an appropriate AC electrical outlet. 3. When plugging the c ...

  • POSline ITT4100 - page 4

    4. Loading the Ribbon Note: Media Hanger This section is not applicable to the direct thermal printing. Ribbon Pick-up Holder Release Levers 1. Lift the top cover to expose the media compartment. 6 Ribbon Supply Holder Thermal Printhead 5 ...

  • POSline ITT4100 - page 5

    2. Unlatch the print head module by pushing the two white release levers on the sides toward the rear . 3. T urn over the print head module to expose the ribbon supply holder . Ribbon Supply Holder Release Lever Print Head Module 8 4. Unwrap the ribbon roll pack and separate the ribbon roll and the bare core. 5. Attach the edge of the ribbon on the ...

  • POSline ITT4100 - page 6

    7. Turn back the print head module and then insert the bare core into the pick-up holder. (First snap in the left side, then the right side.) 8. Turn the wheel of the print head module to ensure the ribbon is tightly wound. 10 9. Press down the print head modul e on both sides firmly till you hear a snap. Wheel Print Head Module 9 ...

  • POSline ITT4100 - page 7

    5. Loading the Media 2. Remove the media hanger. 3. Load the media roll onto the hanger. 4. Unlatch the print head module. A Series printers can be operated in three different options: standard, peel-off, or with a cutter. 5. Left the peeler cover easy for label easy into the slot. - Standard mode allows you to collect each label freely. - In peel- ...

  • POSline ITT4100 - page 8

    6. Lead the label through the media guides with the other hand. The media guide can be adjusted centrality to well fit with different label width. 7. Press down the print head module firmly on both sides till you hear a snap. Media Guides Print Head Module 13 14 ...

  • POSline ITT4100 - page 9

    Peel Off Mode 8. Close the top cover and turn on the printer or press the feed button if the printer is already on. 1. Loose two attached screws on the back of peeler cover. 2. Remove the peeler cover. Screw Feed Button 15 16 ...

  • POSline ITT4100 - page 10

    3. Plug in the dispenser connecter. 5. Secure two attached screws on the back of peeler cover. 4. Mount the dispenser module. 6. Lead the label through the media guides and dispenser. Dispenser Connecter Dispenser Module 18 Media Guides Screw Dispenser 17 ...

  • POSline ITT4100 - page 11

    7. Press down the print head module firmly till you hear a snap. 9. Press the feed button and the label backing paper will come out from the slot under dispenser. 8. Close the top cover and turn on the printer or press the feed button if the printer is already on. Feed Button Feed Button Label Backing Paper Note : The feed button will not drive the ...

  • POSline ITT4100 - page 12

    Cutter Mode 4. Loose the screw on the printer module. 5. Remove the dispenser bar. 1. First plug cutter baby board in JP29 on the main board. 2. Loose two attached screws on the back of peeler cover. 3. Remove the peeler cover. Peeler Cover Screw 22 Dispenser B ar Screw 21 ...

  • POSline ITT4100 - page 13

    6. Plug in the cutter connecter. 8. Lead the label through the media guides and the slot of cutter. 7. Secure the screw of cutter module. 24 9. Press down the print head module firmly on both sides till you hear a snap. Cutter Connecter Media Guides Cutter Module Screw Print Head Module 23 ...

  • POSline ITT4100 - page 14

    6. Operator Controls 10. Close the top cover and turn on the printer or press the feed button if the printer is already on. Power Switch Controls printer power Feed Button On-normal operation Off-the power should be turned off before connect or disconnect the communication cables and power cables Feed Button Advance the label media to first printin ...

  • POSline ITT4100 - page 15

    7. Performing Calibration Ready Indicator T op Cover Power Indicator Feed Button 1. Keep pressing the feed button while turning on the power, until the printing motor becomes activated. 2. The calibration has been performed while the printer automatically feed label stock for certain length. Note: This step is very important and must always be carr ...

  • POSline ITT4100 - page 16

    8. Printing Configuration Report 9. Resetting the Printer to Factory Default Settings 1. Keep pressing the feed button while turning on the power, until the printing motor becomes activated. 1. Turn on the printer and wait for 5 or more seconds. 2. After feeding 12-inch blank media, the printing motor will suspend for one second, then it will print ...

  • POSline ITT4100 - page 17

    10. Hooking up the Printer and Computer Power Jack Note : The power supply barrel connector must be inserted into the power jack on the back of the printer before connecting the communication cables. This printer comes with both a nine-pin Electronics Industrie s Association (EIA) RS-232 serial data interface, a standard Centronics parallel inte r ...

  • POSline ITT4100 - page 18

    11. Communicating with the Printer Parallel Interface Requirements The required cable (IEEE 1284-compliant is recommended) must have a standard 36-pin parallel connector on one end, which is plugged into the parallel port located on the back of the printe r. The other end of the parallel interface cable connects to th e printer connector at the hos ...

  • POSline ITT4100 - page 19

    Installing USB Driver (Windows 98 only) → Click “Next “. → Select "Specify ❑ Install USB driver Properties menu → Right click to get pop-up menu. Notes: Uninstall printer driver before installing USB driver. → Select "Driver". → Click “Update Driver”. 36 a location". → Click “Next “. → Select "Sp ...

  • POSline ITT4100 - page 20

    Installing Printer Driver Notes : 1. If you are just updating your driver, make sure to delete the previous version first. 1. Click the "Start" button. 2. Uninstall printer driver before installing USB driver. 2. Select "Settings", then select "Printers" and double click the "Add Printer" icon. Click "Ne ...

  • POSline ITT4100 - page 21

    Set the Parameters For Win 98 / ME After installing the driver, you can follow the path below to set parameters: ❑ Ports Properties menu Start → Settings → Printers → Label Dr. → Properties → Click "Details". → Select the IO port. The parameters inclu de: → Click "OK". Ports Select the IO port to link with the pr ...

  • POSline ITT4100 - page 22

    ❑ Output bin 41 (Accessory setting) Properties menu → Click "Paper". → Click "more option". → Select Enable/without cutter, peeler. → Click "OK". ❑ Print quality (Speed) Properties menu → Click "Device Options". → Select parameters. → Click "OK". 42 ❑ Create a new size Properties ...

  • POSline ITT4100 - page 23

    For Win 2000 ❑ Ports Properties menu → Click "Ports". → Select the IO port. → Click "OK". ❑ Paper source (Media type) Back to Printers menu → Right click to get pop-up menu. → Select "Printing Reference". → Click "Paper Quality" select media type. → Click "OK". 44 ❑ Orientation P ...

  • POSline ITT4100 - page 24

    For NT 4.0 ❑ Create a new size Printer menu → Right click to get pop- up menu on empty space. → Select "Server Properties". → Enter a form name for the new form in "Form description for". → Reset the paper size in the specific squares of the "Measurements ". → Click "OK". 46 ❑ Ports Properties m ...

  • POSline ITT4100 - page 25

    For Win XP ❑ Paper/Output (Speed) ❑ Print quality (Darkness) Default Document menu → C lick "Advanced". → C lick each item to select desired parameter. → C lick "OK". ❑ Create a new size Please refer to the procedure of create a new size on Win 2000. 48 ❑ Ports Properties menu → Click "Ports". → Selec ...

  • POSline ITT4100 - page 26

    ❑ Orientation 50 ❑ Create a new size Printing Reference menu Printer menu → Click "Layout". → Right click to get → Select "Portrait" or pop-up menu in "Landscape". blank space. → Click "OK". → Select "Server Properties". → Enter a form name for the new form in "Form name”. → ...

  • POSline ITT4100 - page 27

    12. Troubleshooting B. Power and Ready LEDs blink alternately Power LED Ready LED ON OFF OFF ON Normally, when the printer is in abnormal condition, the power LED will keep blinking. The printing work and the communication between the host and printer will stop. To understand the problem, please check both Possible Problems Solutions Remarks Ribbon ...

  • POSline ITT4100 - page 28

     Poor printout quality. D. Miscellaneous . The ribbon may not be qualified.  The host shows "Printer Time out" . The media may not be qualified. 1. Check if the communication cabl e(parallel, serial or USB) is connected securely to your parallel or serial port on the PC and to the connector on the printer at the other end. . Adjust ...

  • POSline ITT4100 - page 29

    13. Caring for Your Printer Replacing Thermal Print Head 1. Switch off the power and wait for both LEDs to go off. Clean the following areas of the printer after 8 rolls of label st ocks have been used. In each case, use a cotton bud dampened with alcohol. Do not soak the cotton bud excessively. 2. Push print head module and pull it down as the 2 a ...

  • POSline ITT4100 - page 30

    3. Loose the 4 screws (C) to take out print head from print head module (12, 13). 4. Unplug the 2 print head cables from the connectors on print head to take off the old print head. 5. Plug the 2 print head cable to the new print head. 6. Screw the new print head on print head module (12,13). 7. Put back new print head module on printer chassis wit ...

  • POSline ITT4100 - page 31

    Fonts, Bar Codes and Graphics Specification Barcodes Code 39, Extended Code 39, Co de 93, Code 128 UCC Code 128(Subset A, B, C) Codab ar , Interleave 2 of 5, EAN-8 2&5 add on, EAN-13, EAN-128, UPC, UP C-A, E 2&5 add on, POSTNET , German POST , Matrix 25 2D Barcodes Maxicode, PDF-417, Graphic PCX bit map, GDI graphics Software PPLB Language ...

  • POSline ITT4100 - page 32

    Interface Specifications 2. Since this printer uses band buffer technology, if you just print texts or barcodes the maximum length can be more than 30 inches, whereas if you print many graphics the maximum length can only be few inches under standard onboard RAM.(The extension RAM, font board and flash modules use the same connector, they cannot fu ...

  • POSline ITT4100 - page 33

    Connection with host: Host 25S Printer 9P Host 9S Printer 9P (PC or compatible) (PC or compatible) DTR 20 …… 1 DSR DTR 4 …… 1 DSR DSR 6 …… 6 DTR DSR 6 …… 6 DTR TX 2 …… 2 RX TX 3 …… 2 RX RX 3 …… 3 TX RX 2 …… 3 TX CTS 5 …… 7 RTS CTS 8 …… 7 RTS RTS 4 …… 8 CTR RTS 7 …… 8 CTS GND 7 …… 5 GND GND 5 …? ...

  • POSline ITT4100 - page 34

    Parallel (Centronics) ASCIITABLE The parallel port is a standard 36-pin Centronics. Its pin assignments are listed as following. 66 0 1 2 3 4 5 6 7 0 NUL 0 @ P ' P 1 SON XON ! 1 A Q a q 2 STX " 2 B R b r 3 XOFF # 3 C S c s 4 $ 4 D T d t 5 NAK % 5 E U e u 6 ACK & 6 F V f v 7 BEL ‛ 7 G W g w B ( 8 H X h x 9 ) 9 I Y i y A LF * : J Z j ...

Fabbricante POSline Categoria Label Printer

I documenti che otteniamo dal fabbricante del dispositivoPOSline ITT4100 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici POSline
- manuali per l’uso ITT4100
- schede prodotto POSline
- opuscoli
- o etichette energetiche POSline ITT4100
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso POSline ITT4100.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione POSline ITT4100, manuali di manutenzione, brevi manuali o manuali utente POSline ITT4100. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto POSline ITT4100.

Manuali per l’uso simili

Manuale completo del dispositivo POSline ITT4100, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare POSline ITT4100 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti POSline ITT4100.

Il manuale per l’uso completo POSline, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale POSline ITT4100 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice POSline ITT4100, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per POSline ITT4100 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo POSline ITT4100 - che ci dovrebbe aiutare nei primi passi durante l'uso POSline ITT4100
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del POSline ITT4100
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio POSline ITT4100 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su POSline ITT4100?

Utilizza il modulo sottostante

Se non hai risolto il problema con POSline ITT4100 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con POSline ITT4100 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)