Italiano dropdown-ico

Manuale per l’uso Freedom9 80

36 pagine 0.59 mb
Scarica

Vai alla pagina of 36

Summary
  • Freedom9 80 - page 1

    freeV iew Power 80 8-port Power Management over IP USER’S MANUAL P/N: KPM-008M Rev . 1.2 ...

  • Freedom9 80 - page 2

    Copyright and T rademark Information This document contains propriet ary information that is protected by copyright. All rights reserved. No part of this document may be photocopied, reproduced, or translated into another language without express prior to written consent of Freedom9 Inc. © 2006 Freedom9 Inc., freeView Power and the freedom9 comp a ...

  • Freedom9 80 - page 3

    freeVie w Power 80 Use r Manual 1 T ABLE OF CONTENTS 1 GENERAL INFORMA TION ............................................................................................................ ...... 2 1.1 O VERVIEW ...................................................................................................................................... 2 1.2 S ...

  • Freedom9 80 - page 4

    2 1 General Information 1.1 Overview The freeView Power 80 allows you to remotely control the AC power for up to eight devices including servers, routers, modems and telephone networks. With the a bility to stack up to 16 units together , up to 128 devices can be controlled from a single interface. The freeVie w Power 80 supports several methods to ...

  • Freedom9 80 - page 5

    freeVie w Power 80 Use r Manual 3 1.4 Features The following are the main features for the freeV iew Power 80: • T urn any AC powered device on or off via IP network and phone. • Support turning on or off connected equipment manually using push buttons on the device. • Integrated 10/100BASE-T Ethernet port for connection to a TCP/IP network. ...

  • Freedom9 80 - page 6

    4 2 Inst allation 2.1 Inst allation Tip s When installing the freeV i ew Power 80, keep the following point s in mind: • Install the u nit in a cool and dry place. Refer to the specifications for det ails on permissible temperature and humidity ranges. • Install the unit in a location free from electromagnetic interference, vibrations, dust, an ...

  • Freedom9 80 - page 7

    freeVie w Power 80 Use r Manual 5 2.4 External Components The following diagrams show the front and rear p anels of the freeView Power 80 (Figures 2 and 3). Figure 2 – Front Panel Figure 3 – Rear Panel Phone Control Port Connecting the freeView Power 80 to an analog telephone port will allow the device to be controlled by dialing the telephone ...

  • Freedom9 80 - page 8

    6 Manual Switches The manual switches (A through H) are associated to the corresponding outlets in the back of the unit. Pressing and holding the button for three seconds will toggle the st ate between remote management (through the web and telnet interfaces) and local management. If a port is set to local management, pressing the button will turn ...

  • Freedom9 80 - page 9

    freeVie w Power 80 Use r Manual 7 freeView Power M2 Y ellow Red Green Description Off Of f On Power on Flashing On On System initializing On Off On Normal operation On Flashing On Connected to incorrect device Flashing Flashing On Writing dat a to flash memory LAN Port LED LED Color Description Green On: LAN connection speed is 100M Flashing: Dat a ...

  • Freedom9 80 - page 10

    8 3 Daisy Chaining 3.1 Daisy Chaining Up to sixteen units of the freeV iew Power 80 can be daisy chained to provide up to 128 managed power outlets. Each unit in the chain must be assigned a unique identification number . The default ID is 0. The following procedur e explains how to d aisy chain multiple units together: 1. Make sure that the T ermi ...

  • Freedom9 80 - page 11

    freeVie w Power 80 Use r Manual 9 15. Configure the third unit’ s ID number to “3” by logging into the web GUI, going to the RPM Setting menu, select “RPM00” under Select RPM, then select “03” beside “Address Change” then click “Apply”. After changing the unit’ s ID number , you will see the LED beside the number 3 light up ...

  • Freedom9 80 - page 12

    10 4 Managing the Device 4.1 SNMPIV The included SNMPIV software allows you to perform maintenance on the device ev en if you do not know the IP address of the unit. The SNMPIV sof tware also includes a st andard MIB which allows the unit to be monitored with third-p arty network man agement software. 4.1.1 Installing the Software T o install the s ...

  • Freedom9 80 - page 13

    freeVie w Power 80 Use r Manual 11 Figure 11 – Network Selection Network Selection By default, the software will automatically select a network interface card to use (wired or wireless). T o change the network interface to use, click “Network Selection” to display a list of available network interfaces (Figure 1 1), and select the one to use. ...

  • Freedom9 80 - page 14

    12 web or telnet interface passwords). T o set a password, enter the p assword into the “New password” field, and enter it again in the “Confirm p assword” field, and click “OK”. Remember to keep a record of this password, as it cannot be recovered if lost. Figure 13 – Advanced Tab On this tab, you can also set the ports used by the d ...

  • Freedom9 80 - page 15

    freeVie w Power 80 Use r Manual 13 Refresh Click the “Refresh” button to search the network for freeV iew Power 80 devices. 4.2 Web Interface T o access the web interface of the freeV iew Power 80, follow these steps: 1. Open a web browser (Internet Explorer 6.0 or higher is recommended). 2. Enter the IP address of t he unit into the address ba ...

  • Freedom9 80 - page 16

    14 Figure 16 – Main Menu Information: Provides information for the connected devices. Configuration: Allows for configuration of the network and devices settings. Log Information: Displays the log of events that occurred on the device. Device selection: Not currently used. Each category consist s of different p ages which are described in detail ...

  • Freedom9 80 - page 17

    freeVie w Power 80 Use r Manual 15 4.2.2 System Status The System S tatus page (Figure 17) displays the det ails of the system along with current network configuration settings. Figure 17 – System Status Page Firmware V ersion: Current version of firmware on the unit. Device Number: Unique identifier for the unit. System Name: The name given to t ...

  • Freedom9 80 - page 18

    16 4.2.3 RPM Status The RPM S tatus page (Figure 18) displays the current st atus of all of the power outlets, and allows you to turn outlets on and of f. Figure 18 – RPM Status Page If a power outlet is off, clicking on th e icon to the right of the outlet will turn it on. If a power outlet is on, clicking on the icon to the right of the outlet ...

  • Freedom9 80 - page 19

    freeVie w Power 80 Use r Manual 17 4.2.4 Network The Network page (Figure 19) allows you to change the net work settings of the device. Figure 19 – Network Page IP Address: The IP address of the unit used for web and telnet access. Subnet Mask: The subnet mask of the unit. Gateway: The gateway of the unit, required for accessing external mail ser ...

  • Freedom9 80 - page 20

    18 Obt ain an IP Address: Select whether the unit uses the IP address entered manually in the fields above, or obtains an IP address from a DHCP server . Primary DNS Server: The primary DNS server used for name resolution. Secondary DNS Server: The backup DNS server used for name resolution in the event the primary DNS server is unavailable. Connec ...

  • Freedom9 80 - page 21

    freeVie w Power 80 Use r Manual 19 4.2.5 SNMP The SNMP p age (Figure 20) allows you to manage the SNMP access right s to the device. By default, read/write access is allowed from any computer on the network. It is recommended to change this as soon as possible for security purposes. Figure 20 – SNMP Page System Name: The name given to the unit fo ...

  • Freedom9 80 - page 22

    20 the same community name can connect to the device. Permission: The permissions granted to users connecting using this interface (No Access, Read, Read/Write). Description: A brief description of the connecting users for the administrator ’s reference. Receiver IP Address: The IP address of the computer that should receive trap events. Communit ...

  • Freedom9 80 - page 23

    freeVie w Power 80 Use r Manual 21 4.2.6 Email The Email page (Figure 22) allows y ou to set up email addresses to receive event notifications and daily reports from the freeV iew Power 80. Figure 22 – Email Page Email Server: The SMTP server to use to send out emails. Sender ’ s Email Address: The email address to use in the “From” field f ...

  • Freedom9 80 - page 24

    22 Event s Selection: Clicking this button opens up a window where you can select exactly which traps to send (Figure 21 ). The events list ed under “ENV Events” require a freeV iew Power M2 module to be installed in the device. Email Address (Daily Report): The email address to send the daily report to. Send Email for Daily Report: Set to “Y ...

  • Freedom9 80 - page 25

    freeVie w Power 80 Use r Manual 23 4.2.8 Web/Telnet The Web/T elnet page (Figure 24) allows you to manage which users have access to the web and telnet interfaces on the freeV iew Power 80. Figure 24 – Web/Telnet Page User Name: The user name required to log into the unit. Password: The p assword required to log into the unit. Permission: The per ...

  • Freedom9 80 - page 26

    24 T ime Between Automatic Updates: Set the frequency the unit retrieves the current time from the time server (NO, 1 Hour , 3 Hours, 12 Hours, 1 Day , 10 Da ys, 30 Days). Primary Time Server: The IP address of the primary NTP server to retrieve the time from. Secondary Time Server: The IP address of the secondary NTP server to retrieve the time fr ...

  • Freedom9 80 - page 27

    freeVie w Power 80 Use r Manual 25 Phone Controllabe: Set whether the port can be configured through the telephone port. Control T ype: Set the method the freeView Power 80 uses to turn of f the outlet. • Safe shutdown: T urn off the port af ter the amount of time specified in the Power Off Delay field. • Safe reboot: T urn off the port af ter ...

  • Freedom9 80 - page 28

    26 For more details, refer to the document ation included with your operating system. T o allow sufficient time for a gra ceful system shutdown, it is recommended that the Power Of f Delay time be set to at least 120 seconds. 4.2.11 RPM Action The RPM Action page (Figure 28) list s the actions currently defined on the freeView Power 80 and allows y ...

  • Freedom9 80 - page 29

    freeVie w Power 80 Use r Manual 27 • Environmental Humidity Overrun: The environment sensor is reporting a humidity level above the maximum allowable humidity level (requires freeView Power M2 module). • Environment al Humidity Underrun: The environment sensor is reporting a humidity level below the minimum allowable humidity level (requires fr ...

  • Freedom9 80 - page 30

    28 RPM: Select the unit in the stack on which to t ake action. Outlet: Select the outlet in the unit on which to t ake action. Outlet Action: Set whether the outlet should be turned on or of f. Date: The date to activate the event. Can be set to a single date in “yyyy/mm/dd” format or occur on a daily or weekly basis. Time: The time in “hh:mm ...

  • Freedom9 80 - page 31

    freeVie w Power 80 Use r Manual 29 Figure 33 – Event Log Page The possible event s for the freeView Power 80 are: • RPM Connection Lost: One of the freeView Power 80 unit s in the stack is unavailable. • Outlet On: A specific outlet has been turned on. • Outlet Off: A specific outlet has been turned off. • Outlet Reboot: A specific outlet ...

  • Freedom9 80 - page 32

    30 Figure 34 – Starting Telnet 3. Once the T elnet connection has been made, the screen shown in Figure 35 will be displayed. Figure 35 – Telnet Connection 4. Enter the user name and password (Figure 36). The default value for both user name and password is nothing. It is highly recommended that these be changed as quickly as possible for secur ...

  • Freedom9 80 - page 33

    freeVie w Power 80 Use r Manual 31 Set SNMP MIB System Sets the MIB system group p arameters. Set SNMP Access Control Sets the Manager IP , Community , an d Access Permissions for SNMP access. Set SNMP T rap Notification Sets the IP address of computer which will receive the SNMP trap event s. Set UPS Properties Not used at this time. Set UPS Devic ...

  • Freedom9 80 - page 34

    32 4.4.1 Logging In T o manage the freeView Power 80 using a touch tone telephone, the unit must be connected to a live telephone line. Dial the phone number of the freeView Power 80. After three rings, the unit will answer with two short beeps. Enter your dial-in password followed by the “#” key . (The default password is 123456 789) If the pa ...

  • Freedom9 80 - page 35

    freeVie w Power 80 Use r Manual 33 4.4.3 Changing the Password T o change the password, follow these step s: • Enter the command “888#” after logging in. • Y ou will hear long beep s indicating that the device is ready to change your password. • Enter a new password using the following p attern: 888XXXXXXXXXX#. The password (XXXXXXXXXX) m ...

  • Freedom9 80 - page 36

    34 5 S pecifications 5.1 Product Specifications freeView Power 80 Programmable Power Outlets 8 Power Output 125V AC; 15A; 50~60 Hz (max) Power Source Input Ports 1 Power Source Input 125V AC; 15A; 50~60 Hz (max) Circuit Breakers 1 Push Switch 10/100 Ethernet Ports 1 RS-485 Chain Out Ports 1 RS-485 Chain In Ports 1 T elephone Ports 2 Power Requireme ...

Fabbricante Freedom9 Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoFreedom9 80 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Freedom9
- manuali per l’uso 80
- schede prodotto Freedom9
- opuscoli
- o etichette energetiche Freedom9 80
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Freedom9 80.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Freedom9 80, manuali di manutenzione, brevi manuali o manuali utente Freedom9 80. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Freedom9 80.

Manuali per l’uso simili

Manuale completo del dispositivo Freedom9 80, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Freedom9 80 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Freedom9 80.

Il manuale per l’uso completo Freedom9, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Freedom9 80 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Freedom9 80, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Freedom9 80 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Freedom9 80 - che ci dovrebbe aiutare nei primi passi durante l'uso Freedom9 80
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Freedom9 80
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Freedom9 80 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Freedom9 80?

Utilizza il modulo sottostante

Se non hai risolto il problema con Freedom9 80 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Freedom9 80 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)