Manuale per l’uso Sunix RS-232/422/485

60 pagine 2.5 mb
Scarica

Vai alla pagina of 60

Summary
  • Sunix RS-232/422/485 - page 1

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw RS-232/422/485 Universal PCI/PCI Express USER’S MANUAL Industrial Multiport Serial Cards Ver. 1.0, Feb. 2007 ...

  • Sunix RS-232/422/485 - page 2

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw RS-232/422/485 Universal PCI/PCI Express Industrial Multuport Serial Car ds Copy right Copyright© 2005 SUNIX Co., Ltd. All Rights Reserved. No part of this p ublication may be reprodu ced, transcr ibed, stored in a retrieval system , translated into any langu age, or trans ...

  • Sunix RS-232/422/485 - page 3

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw INDEX Chapter 1 Introduction.................................................. ...................................... Overview.................. ........................ ............................. ............................. ................... .........1-2 Package Che ...

  • Sunix RS-232/422/485 - page 4

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 1. Introduction SUNIX Serial Communication Boar ds family provides an arra y of PCI Express, PCI, PCI-104 an d PC/104 interfaces to meet your serial po rt expansion needs. Mu lti-port S erial Communic ation Board co mes in the sele ction of 2. 4.8 ports in choice of RS-232, ...

  • Sunix RS-232/422/485 - page 5

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 1-3. Product Features New Design of Matrix UA RT controller Matrix is a high ly integrated m ulti-port UA RT controll er that inclu des all of its fu nctions into a sin gle chip. In addition to those functions provided by a standard 16C 750 UART ch ip, it also equips lots o ...

  • Sunix RS-232/422/485 - page 6

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw Galvanic isolation removes the ground-loop curr ents from data lines; hence, the impressed noise voltage that affects the signal also is elim inated. Common -mod e noise can be removed completely and many forms of radiated noise can be reduced to neg ligible limit s using t ...

  • Sunix RS-232/422/485 - page 7

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw z Dimensions Dimensions (W × D) 125 x 63 mm (for RS-232 only and RS-42 2/485 only) 135 x 63 mm (for 3-in-1 only) z Regulatory Approvals Regulatory Approvals CE, FCC PCI Express Interface z Function Type PCI Express Ind ustrial Mult i-Port Serial C ard Mode of Operation Han ...

  • Sunix RS-232/422/485 - page 8

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw Regulatory Approvals CE, FCC 2. Hardware Installation This chapter includes in for mation about hardware installat ion for RS-232 Univers al PC I Multi-Port Communication Board. The following topics are covered:   Hardware Install ation   Pin Assignments 2-1. Ha ...

  • Sunix RS-232/422/485 - page 9

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 2-2. Pin Assignment ...

  • Sunix RS-232/422/485 - page 10

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 3. Software Installation After instal ling the RS-2 32/42/485 Universal PCI / PCI Express Multi- Port Communication Board in your system successfully, please follow the step by step s oftware installa tion guid e to con firm how t o install appropri ate driver and configure ...

  • Sunix RS-232/422/485 - page 11

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (1) Please inse rt the driver CD in your CD/DV D-ROM drive. (2) Please c lick “ Next ” to continue. (3) Please choo se “ Search fo r a suitab le driver fo r my device (re commended ) “optio n, and clic k “ Next ” again to continue. (4) Please choose the 2 item s ...

  • Sunix RS-232/422/485 - page 12

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (6) Please choose the CD/DVD-ROM d rive, and choose the path “ Windows2K &XP&2003&Vista_32bit ”, and click “ Open ” to continue. (7) Please c lick “ OK ” to continue. (8) Please c lick “ Next ” to continue. ...

  • Sunix RS-232/422/485 - page 13

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (9) Please c lick “ Yes ” to continue. (10) Please click “ Finish ” to continue. ...

  • Sunix RS-232/422/485 - page 14

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (11) Please click “ Next ” to continue. (12) Please choose “ S earch for a su itable dr iver for my de vice (recom mended) “option, and click “ Next ” again to continu e. ...

  • Sunix RS-232/422/485 - page 15

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (13) Please choose the 2 it ems as below, then click “ Next ” to continues. (14) Please click “ OK ” to continue. ...

  • Sunix RS-232/422/485 - page 16

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (15) Please click “ Next ” to continue. (16) Please click “ Finish ” to continue. Note. Please return step11~step16 to install. ...

  • Sunix RS-232/422/485 - page 17

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw   Configure the Seri al Port Settings 1. Please launch the “ Device Manager ” 2. Right click the “ SUNIX Mat rix Serial port XXX (COM XXX) ” item from the “ Ports (COM & L PT) ” sub-tree and click “ Properties ”. ...

  • Sunix RS-232/422/485 - page 18

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 3. Click “ Port Se ttin gs ” tab page and cl ick “ Advanc ed ” for advanced settings. 4. Click “ Defaul ts ” button for restor ing default advanced settings. ...

  • Sunix RS-232/422/485 - page 19

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 5. Check/Un-check the “ Enab le 64 Byte FIFO buffe rs ” checkbox to enable / disab l e the hardware FIFO buffering feature or you can select the s ize of FIFO if “ Use FIFO bu ffers control” is enabled. 6 . R e - m ap t h e C O M p o r t n u m b e r b y s e l e c t ...

  • Sunix RS-232/422/485 - page 20

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw  Uninstalling De vice 1. Please launch the Device Manager , and find the SUNIX Matri x Serial Por t XXX (COMXXX ) . 2. Right click the “ SUNIX Mat rix Serial port XXX (COMX XX) ” item from the “ Ports (COM & LPT) ” sub-tree and click “ Uninstall ”. ...

  • Sunix RS-232/422/485 - page 21

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 3. Please click “ OK ” to remove driver, and repeat step2~step3 to remove other ports. 3-2. Windows XP (32 / 64-bit) The following p rocedure is for installing PC I / PCI-E serial board driver under 32 / 64- bit hardware syste m under Windows XP. Th is driver is certi f ...

  • Sunix RS-232/422/485 - page 22

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (1) Please choose “ No, not this time ” option, and click “ Next ” to continue. (2) Please inse rt the dr iver CD in yo ur CD/DVD ROM drive, and choose “Install f rom a list o r specific lo cation (Advanced)” option, and click “Next” to continue.. (3) Please ...

  • Sunix RS-232/422/485 - page 23

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (4) Please choo se the CD-ROM drive, an d f ind the driver fold er , and click “ OK ” to continue. P.S.1. XP 32bit, please use the fo lder Wind ows2K&XP &2003&Vista_32bit P.S.2. XP 64bit, please use the f older WindowsXP&2003_64bit (5) Please c lick ...

  • Sunix RS-232/422/485 - page 24

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (6) Please c lick “ Continue Anyway ” to continue. (7) Please c lick “ Finish ” to continue. ...

  • Sunix RS-232/422/485 - page 25

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (8) Please choo se “ Install fro m a list or sp ecific loc ation (Advan ced) ” option, and click “ Next ” to continue. (9) Please c lick “ Next ” to continue. ...

  • Sunix RS-232/422/485 - page 26

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (10) Please click “ Continue Anyway ” to continue. (11) Please click “ Finish ” to continue. Note. Please repeat st ep8~step11 to install. ...

  • Sunix RS-232/422/485 - page 27

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw  Configure the Serial Port Setting s 1. Please launch the “ Device Manager ” from Star t Æ Control Panel Æ System ...

  • Sunix RS-232/422/485 - page 28

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 2. Right click the “ SUNIX Mat rix Serial port XX X (COMXXX)” it em from the “P orts (COM & LPT) ” sub-tree and click “Properties”. 3. Click “ Port Se ttin gs ” tab page and cl ick “ Advanc ed ” for advanced settings. ...

  • Sunix RS-232/422/485 - page 29

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 4. Click “Defaults” button for restoring default advanced settings. 5. Check/Un-check the “ En able 64 Byte F IFO buffers ” checkbox to enable / disabl e the hardware FIFO buff ering feature or you can select the s ize of FIFO if “ Use FIFO bu ffers control” is ...

  • Sunix RS-232/422/485 - page 30

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 6 . R e - m ap t h e C O M p o r t n u m b e r b y s e l e c t a f r e e C O M p o r t n u m b e r f r o m t h e “ COM Port Nu mber ” combo box. The (in use) means this COM port number is used by another COM port. 7. Click “ OK ” to save your settings, and repeat ab ...

  • Sunix RS-232/422/485 - page 31

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 2. Right click the “ SUNIX Mat rix Serial port XXX (COMX XX) ” item from the “Ports (COM & LPT)” sub-tree and click “ Uninstall ”. 3. Please click “ OK ” to remove driver, and repeat step2~step3 to remove other ports. ...

  • Sunix RS-232/422/485 - page 32

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 3.3. Windows Server 2003 (32 / 64-bit) The following p rocedure is for installing PC I / PCI-E serial board driver under 32 and 64- bit operation system Server 2003 including 32bit dr iver and both INTEL and AMD 64-bit hard ware systems. INTEL: Windows Server 2003 for 64-Bi ...

  • Sunix RS-232/422/485 - page 33

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (2) Please selec t “ Install f rom a list or specif ic location (Advance) ”, and Click “ Next ” to continue. (3) Please choose the 2 it ems as below, and click “ Browser ” to continue. ...

  • Sunix RS-232/422/485 - page 34

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (4) Please choo se CD driver fo lder to instal l multi-port card driver, and click “ OK ” to continue. P.S.1. 32bit, please use the fo lder Wind ows2K&XP &200 3&Vista_32bit P.S.2. 64bit, please use the folder WindowsXP&2003_6 4bit (5) Please c lick ? ...

  • Sunix RS-232/422/485 - page 35

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (6) Please c lick “ Continue Anyway ” to con tinue install. (7) Please c lick “ Finish ” to continue. ...

  • Sunix RS-232/422/485 - page 36

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (8) Please choo se “ No, no this time ” option, and click “ Next ” to continue. ...

  • Sunix RS-232/422/485 - page 37

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (9) Please choo se “ Install fro m a list or sp ecific loc ation (Advan ce) ” option, and click “ Next ” to continue. (10) Please click “ Next ” to continue. (11) Please click “ Continue Anyway ” to continue. ...

  • Sunix RS-232/422/485 - page 38

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (12) Please click “ Finish ” to continue. Note. Please repeat st ep8~step12 to install.  Configure the Serial Port Setting s 1. Plea se launch the “ Device Manager ” ...

  • Sunix RS-232/422/485 - page 39

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 2. Right cl ick the “ SUNIX M atrix Serial Port (COMXXX) ” item from the “ Ports (COM & LPT) ” sub-tree and click “ Properties ”. 3. Click “ Port Se ttin gs ” tab page and cl ick “ Advanc ed ” for advanced settings. ...

  • Sunix RS-232/422/485 - page 40

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 4. Click “ Defaul ts ” button for restor ing default advanced settings. ...

  • Sunix RS-232/422/485 - page 41

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 5. Check/Un-check the “ En able 64 Byte F IFO buffers ” checkbox to enable / disabl e the hardware FIFO buff ering feature or you can select the size of F IFO if “ Use FIFO buffers control ” is enabled. 6 . R e - m ap t h e C O M p o r t n u m b e r b y s e l e c t ...

  • Sunix RS-232/422/485 - page 42

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw  Uninstalling Device 1. Please launch the “ Device Manager ” 2. Expand the “ Ports (COM & LPT) ” sub-tree and right-click the mouse on “ SUNIX Matrix Serial Port (COMXXX) ” item, and select “ Uninstall ”. ...

  • Sunix RS-232/422/485 - page 43

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 3. Please click “ OK ” to remove driver, and repeat step2~step3 to remove other ports. 3.4. Vista (32-bit) The following procedure is for installing PCI / P CI-E serial boar d driver und er 32 -bit op eration system Vista including 32bit driver.  Installing Driver On ...

  • Sunix RS-232/422/485 - page 44

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (2) Please c lick “ Don’t search online ” to continue. (3) Please c lick “ I don’t have the disc. Show me other options. ” to continue. ...

  • Sunix RS-232/422/485 - page 45

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (4) Please c lick “ Bro wse my computer for drivers software (advanced ) ” to continue. (5) Please c lick “ Browse ” to choose driver fo lder. ...

  • Sunix RS-232/422/485 - page 46

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (6) Please choose th e CD/DVD-ROM drive, an d select the driver folder “ Windo ws2K&XP&2 003&Vista_ 32bit ” , and click “ OK ” to continue install. (7) Please c lick “ Next ” to continue. ...

  • Sunix RS-232/422/485 - page 47

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (8) Please c lick “ Inst all this dr iver softwar e anyway ” to continue. (9) Please c lick “ Close ” to continue. ...

  • Sunix RS-232/422/485 - page 48

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (10) Please click “ Don’t search onlin e ” to continue. (11) Please click “ I don’t have the disc. Show me other options ” to continue. ...

  • Sunix RS-232/422/485 - page 49

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (12) Please click “ Browse my computer for drive r software (advanced) ” to continue. (13) Please click “ Next ” to continue. ...

  • Sunix RS-232/422/485 - page 50

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw (14) Please click “ Inst all this d river softwa re anywa y ” to continue. (15) Please click “ Close ” to continue. Not e. Please repeat st ep10~step15 to install. ...

  • Sunix RS-232/422/485 - page 51

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw  C o n f i g u r e t h e Se rial Port Settings 1. Plea se launch the “ Control Panel ” , and launch the “ Device Manager ” ...

  • Sunix RS-232/422/485 - page 52

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 2. Right cl ick the “ SUNIX M atrix Serial Port XXX (COMX XX) ” item from the “ Ports (COM & LPT) ” sub-tree and click “ Properties ”. 3. Click “ Port Se ttin gs ” tab page and cl ick “ Advanc ed ” for advanced settings. ...

  • Sunix RS-232/422/485 - page 53

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 4. Click “ Defaul ts ” button for restor ing default advanced settings. ...

  • Sunix RS-232/422/485 - page 54

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 5. Check/Un-check the “ En able 64 Byte F IFO buffers ” checkbox to enable / disabl e the hardware FIFO buff ering feature or you can select the size of F IFO if “ Use FIFO buffers control ” is enabled. 6. Re-map the COM port number by select a free COM port number ...

  • Sunix RS-232/422/485 - page 55

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw  Uninstalling Device 1. Please launch the “ Device Manager ” 2. Expand the “ Ports (COM & LPT) ” sub-tree and right-click the mouse on “ SUNIX Matrix Serial Port (COMXXX) ” item, and select “ Uninstall ”. ...

  • Sunix RS-232/422/485 - page 56

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 3. Please choose “ Delete the drive r software for this device ”, and click “ OK ” to remove driver, and repe at step2~step3 to remove other po rts. 3.5. Linux The drivers for Linux support both kernel 2.4.x and 2.6.x along with various Linux distributions. Separa t ...

  • Sunix RS-232/422/485 - page 57

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw The installation steps describe d below is sho wed as a general case. More detail descr iption abo ut installa tion could be found on the readme file along with the driver package. 3.5.1. Driver Installation To install the driver, fol low each step s showed below. Package f ...

  • Sunix RS-232/422/485 - page 58

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw If there are more than two boards installed, device nameing convention table as bel ow. Board Number Device Name 1st board ttySMX0 ~ ttySMX7 2nd board tt ySMX8 ~ ttySMX15 3rd board tt ySMX16 ~ ttySMX23 4th board tt ySMX24 ~ ttySMX31 7. To dump information for those serial p ...

  • Sunix RS-232/422/485 - page 59

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 4. Troubleshooting This chapter shows some problems th at user came with usually. Also you can check it if the PCI / PCI-E serial board can not work properly in your system after follo wing h ardware an d softwa re installat ion steps.  Troubleshooting 1. System fails to ...

  • Sunix RS-232/422/485 - page 60

    SUNIX NCCI Co., Ltd. TEL : +886-2-8913- 1987 Email : info@sunix-ncci.com.tw 5. Appendix This chapter sh ows PCI / PCI-E serial board core technolog ies and sho ws you how to co ntact with u s for inform ation about this and other products. In this appendix, we cover the following top ics.  Contract Information Customer satisfaction is our number ...

Fabbricante Sunix Categoria Computer Hardware

I documenti che otteniamo dal fabbricante del dispositivoSunix RS-232/422/485 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Sunix
- manuali per l’uso RS-232/422/485
- schede prodotto Sunix
- opuscoli
- o etichette energetiche Sunix RS-232/422/485
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Sunix RS-232/422/485.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Sunix RS-232/422/485, manuali di manutenzione, brevi manuali o manuali utente Sunix RS-232/422/485. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Sunix RS-232/422/485.

Manuale completo del dispositivo Sunix RS-232/422/485, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Sunix RS-232/422/485 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Sunix RS-232/422/485.

Il manuale per l’uso completo Sunix, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Sunix RS-232/422/485 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Sunix RS-232/422/485, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Sunix RS-232/422/485 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Sunix RS-232/422/485 - che ci dovrebbe aiutare nei primi passi durante l'uso Sunix RS-232/422/485
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Sunix RS-232/422/485
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Sunix RS-232/422/485 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Sunix RS-232/422/485?

Utilizza il modulo sottostante

Se non hai risolto il problema con Sunix RS-232/422/485 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Sunix RS-232/422/485 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)