Italiano dropdown-ico

Manuale per l’uso Brocade Communications Systems DCX 8510-4

168 pagine 13.33 mb
Scarica

Vai alla pagina of 168

Summary
  • Brocade Communications Systems DCX 8510-4 - page 1

    53-1002 1 7 7-0 5 1 0 May 20 12 ® 5 Brocade DCX 85 1 0-4 Backbone Hardware R ef erence Manual ...

  • Brocade Communications Systems DCX 8510-4 - page 2

    Copyright © 20 11-2012 Br ocade Communications Systems, Inc. All Rights Reserved. Brocade, Brocade Assurance, the B-wi ng symbol, BigIron, DCX, Fabric OS, FastIron, MLX, NetIron, SAN Health, Ser verIron, T urboIron, V CS, and VDX are registered tradema rks, and AnyIO, Brocade One, CloudPlex, Effor tless Networking, ICX, NET Health, OpenScript, and ...

  • Brocade Communications Systems DCX 8510-4 - page 3

    Brocade DCX 8510-4 Backbone Hardware Reference Manual iii 53-1002177-05 Brocade DCX 85 1 0-4 Backbone Har dware Refe rence Manual 53-1002 1 7 7-02 Updated fill er panel graphics, CP replacement pr ocedures to 7 .0, data transmission range infor mation, and rack kit measurement. June 20 11 Brocade DCX 85 1 0-4 Backbone Har dware Refe rence Manual 53 ...

  • Brocade Communications Systems DCX 8510-4 - page 4

    iv Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 ...

  • Brocade Communications Systems DCX 8510-4 - page 5

    Brocade DCX 8510-4 Backbone Hardware Reference M anual v 53-1002177-05 Contents About This Document In this chapt er . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Suppor ted har dware and software . . . . . . . . . . ...

  • Brocade Communications Systems DCX 8510-4 - page 6

    vi Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Preparing fo r Brocade DCX 85 1 0-4 installation . . . . . . . . . . . . . . . . 14 Unpacking and installing the Br ocade DCX 85 1 0-4 . . . . . . . . . . . . . 1 6 Items included with the Brocade DCX 85 1 0-4 . . . . . . . . . . . . . . . . . 1 7 Pro viding power t o the Broca ...

  • Brocade Communications Systems DCX 8510-4 - page 7

    Brocade DCX 8510-4 Backbone Hardware Reference M anual vii 53-1002177-05 Determining the status of a port, application, or encr yption blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Blade illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Det ermining the status of a ...

  • Brocade Communications Systems DCX 8510-4 - page 8

    viii Brocade DCX 8510-4 Backbone Hardware R eference Manual 53-1002177-05 Po wer supply remov al and replacement . . . . . . . . . . . . . . . . . . . . . . 78 Time and items re quired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Identifying pow er supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Remo ving ...

  • Brocade Communications Systems DCX 8510-4 - page 9

    Brocade DCX 8510-4 Backbone Hardware Reference M anual ix 53-1002177-05 Envir onmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 13 Fibre Channel port specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 1 14 Po wer specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems DCX 8510-4 - page 10

    x Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 ...

  • Brocade Communications Systems DCX 8510-4 - page 11

    Brocade DCX 8510-4 Backbone Hardware Reference M anual xi 53-1002177-05 Figures Figure 1 Port side of the Brocade DCX 8 510-4 (sample configuration) . . . . . . . . . . . . . . . 4 Figure 2 Port side of the Brocade DCX 8510-4 with the port side exhaust kit installed (sample configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems DCX 8510-4 - page 12

    xii Brocade DCX 8510-4 Backbon e Hardware Reference Manual 53-1002177-05 Figure 33 QSFP cable connections for B rocade DCX 8510 chassis (sample configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Figure 34 DCX 8510 core/edge ICL topology . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems DCX 8510-4 - page 13

    Brocade DCX 8510-4 Backbone Hardware Reference M anual xiii 53-1002177-05 Tables Ta b l e 1 Blades available for the Broc ade DCX 8510-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Ta b l e 2 Installation tasks, time, and item s required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Ta b l e 3 Port and application blade ...

  • Brocade Communications Systems DCX 8510-4 - page 14

    xiv Brocade DCX 8510-4 Backbon e Hardware Reference Manual 53-1002177-05 ...

  • Brocade Communications Systems DCX 8510-4 - page 15

    Brocade DCX 8510-4 Backbone Hardware Reference M anual xv 53-1002177-05 About This Document In this chapter • How this document is organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv • Suppor ted har dware and software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi • What’s new in this docu ...

  • Brocade Communications Systems DCX 8510-4 - page 16

    xvi Brocade DCX 8510-4 Backbon e Hardware Reference Manual 53-1002177-05 Supported hardware and software • Appendix C, “Diagnostics and T roubleshooting,” pr ovides methods for receiving system-wide or component-lev el status and interpreting P OST and boot activities and diagnostic tests; it also includes troubleshoo ting tips. • Appendix ...

  • Brocade Communications Systems DCX 8510-4 - page 17

    Brocade DCX 8510-4 Backbone Hardware Reference M anual xvii 53-1002177-05 Document conventions Command syntax conventions Command syntax in this manu al follo ws these conventions: Command examples This book describes how to perform configuration tasks using the Fabric OS command line interface, but does not describe the commands in de tail. For co ...

  • Brocade Communications Systems DCX 8510-4 - page 18

    xviii Brocade DCX 8510 -4 Backbone Hardware Reference Manual 53-1002177-05 Notice to the reader CAUTION A Caution stat ement aler ts y ou to situations that can be pot entially h azardous to you or cause damage to har dware, firmware, sof tware, or data. DANGER A Danger stat ement indicates conditions or situations that can be potentially lethal or ...

  • Brocade Communications Systems DCX 8510-4 - page 19

    Brocade DCX 8510-4 Backbone Hardware Reference M anual xix 53-1002177-05 Getting technical help For additional Br ocade documentat ion, visit the Brocade website: http://www .brocade.com Release no tes are a vailable on the MyBrocade webs it e and are also bundled with the Fabric OS firmw are. Other industry resources For additional resource inf or ...

  • Brocade Communications Systems DCX 8510-4 - page 20

    xx Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Document feedback In addition, the chassisS how command displa ys the Brocade DCX 85 10-4 serial number , as well as inf ormation about the por t a nd application blades, an d other f ield-replaceabl e units (FRUs). 3. License I D Use the licenseIdSho w command to display the l ...

  • Brocade Communications Systems DCX 8510-4 - page 21

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 1 53-1002177-05 Chapter 1 Brocade DCX 8510-4 Backbone Overview In this chapter • Brocade DCX 85 10-4 f eatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 • Brocade DCX 85 10-4 har dware components . . . . . . . . . . . . . . . . . . . . . . . . . 2 • Broca ...

  • Brocade Communications Systems DCX 8510-4 - page 22

    2 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 hardware components 1 • Beginning with Fabric OS v7 .0. 1, up to nine chassis can be connect ed with the use of 4x1 6 Gbps quad SFP (QSFP) int er-chassi s links (ICLs). Fabric OS v7 .0.0 permits up to six chassis to be linked. • Suppor t for high-performan ...

  • Brocade Communications Systems DCX 8510-4 - page 23

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 3 53-1002177-05 Brocade DCX 8510- 4 hardware components 1 • Modular , hot-swappabl e encr yption blades: - FS8-18: 1 6-por t, up to 4 blades per chassi s, supporting in-flight data cr ypt ographic (encryption/decr yption) and data-compression capabilities. • Modular , hot-swapp able fiel d- ...

  • Brocade Communications Systems DCX 8510-4 - page 24

    4 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 hardware components 1 Port side of the Brocade DCX 8510-4 NOTE Air flow in the Br ocade DCX 85 10-4 is from the non por t side to the left side and por t side of the chassis (vie wed from the port side) and out the exhaust vents. I f you use the Por t Side Exh ...

  • Brocade Communications Systems DCX 8510-4 - page 25

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 5 53-1002177-05 Brocade DCX 8510- 4 hardware components 1 FIGURE 2 P or t side of the Brocade DCX 85 10-4 with the port side exhaust kit installed (sample configura tion) ...

  • Brocade Communications Systems DCX 8510-4 - page 26

    6 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 hardware components 1 Nonport side of the Brocade DCX 8510-4 Figure 3 displays a sample configuration of the non por t side view of the Brocade DCX 85 1 0-4. FIGURE 3 Nonport side of the Brocade DCX 85 10-4 (sample configuration) 1 WWN ca rd bezel (logo plate) ...

  • Brocade Communications Systems DCX 8510-4 - page 27

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 7 53-1002177-05 Brocade DCX 8510-4 blades 1 Brocade DCX 8510-4 blades Ta b l e 1 summarizes the por t, applicat ion, control proc essor , and core switch blades that are a vailable for the Brocade DCX 85 1 0-4. TA B L E 1 Blades av ailable for the Br ocade DCX 85 1 0-4 Description Name Function ...

  • Brocade Communications Systems DCX 8510-4 - page 28

    8 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 High availability 1 High availability The following f eatures co ntribute to the Br oc ade DCX 85 1 0-4 hig h-availability design: • Redundant, ho t-swappable FRUs, including blad es, power supplies, blowers, and WWN cards • Enhanced data integrity on all data paths • Fabr ...

  • Brocade Communications Systems DCX 8510-4 - page 29

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 9 53-1002177-05 Serviceability 1 Serviceability The Brocade DCX 85 10-4 pro vides the following f e atures to enhance and ensure serviceability: • Modular design with hot- swappable components. • Flash memor y that stores two firm wa re images per control pr ocessor . • USB port on contro ...

  • Brocade Communications Systems DCX 8510-4 - page 30

    10 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Security 1 Security The follo wing lis t highlights some of the ke y secu rity features available f or the Brocade DCX 85 10-4 and fo r other Brocade enter prise-class products ru nning Fabric OS 7 .0.1 or lat er . For details, contact y our Brocade DCX 85 10-4 supplier and ref ...

  • Brocade Communications Systems DCX 8510-4 - page 31

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 11 53-1002177-05 Network managea bility 1 Network manageability The Bro cade DCX 85 10-4 has a single domain an d is managed as a single element with the Br ocade Network A dvisor . The Br ocade DCX 85 10-4 responds to its own IP address and appears as a separate entity t o the T elnet prot oco ...

  • Brocade Communications Systems DCX 8510-4 - page 32

    12 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Network manageabili ty 1 ...

  • Brocade Communications Systems DCX 8510-4 - page 33

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 13 53-1002177-05 Chapter 2 Installation of the Brocade DCX 8510-4 In this chapter • Time and items re quired . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 • Preparing f or Brocade DCX 85 1 0-4 installation . . . . . . . . . . . . . . . . . . . . . . 1 ...

  • Brocade Communications Systems DCX 8510-4 - page 34

    14 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Preparing for Brocade DCX 85 10-4 installation 2 Preparing for Brocade DCX 8510-4 installation NOTE Read the saf ety notices before installation ( “Saf ety notices” ). Rea d “Power specifications” to plan f or meeting power supply standards bef ore installing the chassi ...

  • Brocade Communications Systems DCX 8510-4 - page 35

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 15 53-1002177-05 Preparing for Brocade DCX 8510-4 installation 2 The follo wing steps are required to ensure corre ct installation and operation. 1. Plan to install the Brocade DCX 85 10-4 with th e nonpor t side facing the air-intak e aisl e. The Brocade DCX 85 1 0-4 can be installed facing ei ...

  • Brocade Communications Systems DCX 8510-4 - page 36

    16 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Unpacking and installing the Brocade DCX 8510-4 2 Unpacking and installing the Brocade DCX 8510-4 Use the f ollowing proced ure to unpack and install y our Brocade DCX 85 1 0-4. CAUTION Use saf e lif ting practices when mo ving the product. (C01 5) NOTE A fully populat ed Broca ...

  • Brocade Communications Systems DCX 8510-4 - page 37

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 17 53-1002177-05 Items included with the Brocade DCX 851 0-4 2 Items included with the Brocade DCX 8510-4 The Bro cade DCX 85 10-4 ships with the f ollowing: • Brocade DCX 85 10-4 chassis, populated with: - Control pr ocess o r blades (CP8) - Core switch bl ades (CR1 6-4) - Port bla des, appl ...

  • Brocade Communications Systems DCX 8510-4 - page 38

    18 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Providing power to the Brocade DCX 8510-4 2 Providing power to the Brocade DCX 8510-4 Complet e the following st eps to pr ovide pow er to the chassis. DANGER Use the supplied power cor ds. Ensure the facility power receptacle is the correct type, supplies the required voltage, ...

  • Brocade Communications Systems DCX 8510-4 - page 39

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 19 53-1002177-05 Chassi s slots 2 • FC1 6-32 por t blade — Por ts are numbered from 0 thr ough 15 from right t o lef t on the lower set of por ts and 1 6 throug h 3 1 from right t o lef t on the upper set of por ts. • FC1 6-48 por t blade — P or ts are numbered from 0 thr ough 23 from r ...

  • Brocade Communications Systems DCX 8510-4 - page 40

    20 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Cable management 2 Cables can be org anized and manag ed in a variety of ways, f or example, using cable chan nels on the sides of the cabinet or patch panels to mini mize cable management. Following is a list of recommendations: NOTE Y ou should not use tie wra ps with optical ...

  • Brocade Communications Systems DCX 8510-4 - page 41

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 21 53-1002177-05 Cable manage ment 2 FIGURE 4 Cable design for t he mSFP patch cables for the FC8-64 high density port blade Note that the duplex clip on the mSFP end of th e cable is black for easier recognition. See the appendix for a listing of the qualified mSFP optical cables for the FC8- ...

  • Brocade Communications Systems DCX 8510-4 - page 42

    22 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Cable management 2 ...

  • Brocade Communications Systems DCX 8510-4 - page 43

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 23 53-1002177-05 Chapter 3 Logging In and Configuring the Brocade DCX 8510-4 In this chapter • Configuring the Br ocade DCX 85 10-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 • Establishing a seri al connection to the Brocade DCX 85 10-4 . . . . . . . . . . . 2 4 • Log ...

  • Brocade Communications Systems DCX 8510-4 - page 44

    24 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Establishing a serial connection to the Brocade D CX 8510-4 3 The configuration information is mirrored to the standby CP blade, which allows the current configuration to remain available e ven if the active CP blade fails. The conf iguration information for the Broc ade DCX 85 ...

  • Brocade Communications Systems DCX 8510-4 - page 45

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 25 53-1002177-05 Logging in to the serial conso le port 3 1. V erify that the Br ocade DCX 85 1 0-4 is powered on and that POS T is com plete b y ver ifying that all pow er LED indicators on the por t, control pr oc essor , and core switch blades displa y a steady green light. 2. R emove th e s ...

  • Brocade Communications Systems DCX 8510-4 - page 46

    26 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Configuring the IP addresses 3 1. Log in t o the Brocade DCX 85 10-4 as admin . The default passwo rd is passwor d . At the init ial login, you are prompted to enter new admin and us er passwords. Make sure t o write down the new pass words and k eep this inform ation in a secu ...

  • Brocade Communications Systems DCX 8510-4 - page 47

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 27 53-1002177-05 Logging off the serial console port and disconnecting the serial cable 3 NOTE The addresses 1 0.0.0.0 thr ough 10.0.0.2 55 are reser ved and used int ernally by the Brocade DCX 85 10-4. Ex ternal IPs must not use these addresses. 3. Set up the CP0 IP address by ent ering the ip ...

  • Brocade Communications Systems DCX 8510-4 - page 48

    28 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Customizing a switch name 3 NOTE Connecting the CP blades t o a pr ivat e network/VLAN is recommended. By establishing an Ethernet co nnection, y ou can complete the Br oc ade DCX 85 10-4 c onfiguration using either a serial session, T elnet, or ma nage ment app lications, such ...

  • Brocade Communications Systems DCX 8510-4 - page 49

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 29 53-1002177-05 Setting the domain ID 3 2. Enter chassisName by itself to sho w the name. switch:admin> chassisname DCX8510_chassis 3. Recor d the new name for ref erence. Setting the domain ID Each switch in the fabr ic must have a unique do main ID. Th e doma in ID can b e manually set th ...

  • Brocade Communications Systems DCX 8510-4 - page 50

    30 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Setting the d ate and time 3 • HH is the hour; valid v alues are 00 through 23. • MM is m inu tes ; val id val ue s ar e 0 0 th roug h 5 9. • yy is the year; v alid values are 00 through 99 (values greater than 69 are int erpreted as 19 70 through 1999, and values less th ...

  • Brocade Communications Systems DCX 8510-4 - page 51

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 31 53-1002177-05 Verifying the PID mode 3 Synchronizing local time T o synchronize the local time of the principal or pr imary switch with that of an ext ernal NTP ser ver , follo w these steps. 1. If necessary , log on to the switch by T elnet, using the admin account. 2. Enter the tsClockSer ...

  • Brocade Communications Systems DCX 8510-4 - page 52

    32 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining installed software licenses 3 Y ou can check the PID setting using the con figshow command as in the f ollowing example. Y ou can use the | grep -i pid qualifier to pinpoint the PID information. switch:admin> configshow | grep -i pid fabric.ops.mode.pidFormat:1 f ...

  • Brocade Communications Systems DCX 8510-4 - page 53

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 33 53-1002177-05 Installing transceivers a nd attaching cables 3 The ports are color-coded t o indicate which c an be used in the same port group f or trunking (trunking por t groups can be up t o eight por t s). The port s and cables used in trun ki ng g roup s m ust meet specific requirements ...

  • Brocade Communications Systems DCX 8510-4 - page 54

    34 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Installing transceivers and attaching cables 3 4. V erify the Broc ade DCX 85 10-4 and connector and por t status using the switchShow -qsfp command. A sample of the command output is shown belo w. The e xample is from a DCX 85 1 0-4 with a core blade installed in slot 3. Some ...

  • Brocade Communications Systems DCX 8510-4 - page 55

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 35 53-1002177-05 Managing cables 3 748 3 28 7 ------ id 16G Online FC E-Port 10:00:00:05:1e:39:e4:5a trunkmaster name (Trunk master) 749 3 29 7 ------ id 16G Online FC E-Port 10:00:00:05:1e:39:e4:5a trunkmaster name (Trunk master) 750 3 30 7 ------ id 16G Online FC E-Port 10:00:00:05:1e:39:e4:5 ...

  • Brocade Communications Systems DCX 8510-4 - page 56

    36 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Verifying correct operation and backing up the conf iguration 3 Verifying correct operation and backing up the configuration T o verify correct operation and back up the Broca de DCX 85 10-4 configuration, f ollow these st eps. For inf ormation about LED patt erns, see Ta b l e ...

  • Brocade Communications Systems DCX 8510-4 - page 57

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 37 53-1002177-05 Powering off the Brocade DCX 8510- 4 3 Are you sure you want to shutdown the switch [y/n]?y HA is disabled Stopping blade 1 Shutting down the blade.... Stopping blade 2 Shutting down the blade.... Stopping blade 8 Shutting down the blade.... Broadcast message from root (pts/1) ...

  • Brocade Communications Systems DCX 8510-4 - page 58

    38 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Powering off the Brocade DCX 8510-4 3 ...

  • Brocade Communications Systems DCX 8510-4 - page 59

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 39 53-1002177-05 Chapter 4 Monitoring System Components In this chapter • Monitoring overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 • Determining the status of a port, applicat ion, or en cr yption b lade . . . . . . . 4 4 • Det erminin ...

  • Brocade Communications Systems DCX 8510-4 - page 60

    40 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Monitoring overview 4 0 1 0 820000 id N8 Online FC F-Port 10:00:00:05:1e:f8:a0:b4 1 1 1 820100 id N8 Online FC F-Port 10:00:00:05:33:26:0e:65 2 1 2 820200 id N8 Online FC F-Port 10:00:00:05:33:48:5e:f5 3 1 3 820300 id N8 Online FC F-Port 10:00:00:05:1e:f8:a0:b3 4 1 4 820400 id ...

  • Brocade Communications Systems DCX 8510-4 - page 61

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 41 53-1002177-05 Monitoring overview 4 36 1 36 822400 id N8 No_Light FC 37 1 37 822500 id N8 No_Light FC 38 1 38 822600 id N8 No_Light FC 39 1 39 822700 id N8 No_Light FC 40 1 40 822800 id N8 No_Light FC 41 1 41 822900 id N8 No_Light FC 42 1 42 822a00 id N8 No_Light FC 43 1 43 822b00 id N8 No_L ...

  • Brocade Communications Systems DCX 8510-4 - page 62

    42 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Monitoring overview 4 Factory Part Num: 60-1000376-08 Factory Serial Num: AHJ0420F086 Manufacture: Day: 21 Month: 5 Year: 2010 Update: Day: 29 Month: 3 Year: 2011 Time Alive: 229 days Time Awake: 0 days CORE BLADE Slot: 3 Header Version: 2 Power Consume Factor: -135 Power Usage ...

  • Brocade Communications Systems DCX 8510-4 - page 63

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 43 53-1002177-05 Monitoring overview 4 POWER SUPPLY Unit: 2 Header Version: 2 Power Consume Factor: 2000 Factory Part Num: 23-0000067-01 Factory Serial Num: AGC2M03FR7T Manufacture: Day: 7 Month: 6 Year: 2010 Update: Day: 29 Month: 3 Year: 2011 Time Alive: 221 days Time Awake: 0 days FAN Unit: ...

  • Brocade Communications Systems DCX 8510-4 - page 64

    44 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining the status of a port, application, or en cryption blade 4 Determining the status of a port, application, or encryption blade Use the f ollowing proced ure to det ermine th e status of a por t or application blade. 1. Check the LEDs on the blade. • Figure 6 illustr ...

  • Brocade Communications Systems DCX 8510-4 - page 65

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 45 53-1002177-05 Determining the status of a port, application, or encryption blade 4 NOTE The FC8-64 port blade requires mSFPs (standar d SFPs do not fit) as w ell as narrow er OM-3 LC cables offered by major manuf acturers su ch as Corning, Mole x, and Amphenol. FIGURE 7 FC8-32E port blade FI ...

  • Brocade Communications Systems DCX 8510-4 - page 66

    46 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining the status of a port, application, or en cryption blade 4 FIGURE 9 FC1 6-32 por t blade FIGURE 1 0 FC16-48 port blade 1 Status LED 3 Fibre Channel port 2 Pow er LED 4 Port Status LED 1 Status LED 3 Fibre Channel port 2 Pow er LED 4 Port Status LED 1 3 4 2 1 3 4 2 ...

  • Brocade Communications Systems DCX 8510-4 - page 67

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 47 53-1002177-05 Determining the status of a port, application, or encryption blade 4 FIGURE 1 1 FS8-18 encr ypt ion blade FIGURE 12 FX8-24 extension blade See “FX8-2 4 blade” fo r information about trunking g roups on this blade. 1 Status LED 3 Fibre Channel port 2 Pow er LED 4 Port Status ...

  • Brocade Communications Systems DCX 8510-4 - page 68

    48 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining the status of a port, application, or en cryption blade 4 Ta b l e 3 describes the por t and application blade LE D patterns and the recommended actions f or those patterns. TA B L E 3 Port and application blade LED descriptions LED purpose Color Status Recommended ...

  • Brocade Communications Systems DCX 8510-4 - page 69

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 49 53-1002177-05 Determining the status of a port, application, or encryption blade 4 FC Por t Status No light (LE D is of f) Por t has no incoming power , o r there is no light or si gnal carrier detect ed. V erify that the pow er LED is on, check the transceiv er and cable. Polli ng is in pro ...

  • Brocade Communications Systems DCX 8510-4 - page 70

    50 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining the status of a control processor blade (CP8) 4 Determining the status of a control processor blade (CP8) Complet e the following st eps to det ermine the status of a control blade (CP8) 1. Check the LED indicat ors on the CP blade ( Figure 13 ). The LED patterns ma ...

  • Brocade Communications Systems DCX 8510-4 - page 71

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 51 53-1002177-05 Determining the status of a core switch blade (CR16-4) 4 Determining the status of a core switch blade (CR16-4) Complet e the following st eps to det ermine the status of a core switch blade (CR1 6-4). 1. Check the LED indicators on the core switch bl ade (see the f ollowing fi ...

  • Brocade Communications Systems DCX 8510-4 - page 72

    52 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining the status of a core switch blade (CR16-4) 4 FIGURE 1 4 Core switch blade (CR16-4) Ta b l e 5 describes the core switch blade LED patt erns and the recommended actions for those patterns. 1 Power LED 3 Q SFP por t map and tr unking diagram 2 Status LED 4 QSFP connec ...

  • Brocade Communications Systems DCX 8510-4 - page 73

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 53 53-1002177-05 Determining the status of a power supply 4 Refe r to Figure 36 and Ta b l e 2 7 for a map of the ports and a table of external por ts to int ernal por t s as shown in the slotS how command Determining the status of a power supply Complet e the following st eps to det ermine the ...

  • Brocade Communications Systems DCX 8510-4 - page 74

    54 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining the status of a blower assembly 4 FIGURE 1 5 Powe r su p pl y Ta b l e 6 describes the pow er supply LED patterns an d the recommended actions for those patterns. Determining the status of a blower assembly Complete the following st eps to det erm ine the status of ...

  • Brocade Communications Systems DCX 8510-4 - page 75

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 55 53-1002177-05 Determining the status of a WWN card 4 FIGURE 1 6 Blo wer assembly Ta b l e 7 describes the LED patterns f or the blow er assembly . Determining the status of a WWN card Complet e the following st eps to det ermine the status of a WWN card. 1P o w e r L E D 2F a u l t L E D TA ...

  • Brocade Communications Systems DCX 8510-4 - page 76

    56 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining the status of a WWN card 4 NOTE The WWN bezel (logo plat e) covers the WWN car d s. The LEDs on the WWN car ds are not visible unless the bezel is remov ed. Enter the chassisShow command to displa y information about the WWN card. (WWN units correspond to inf ormati ...

  • Brocade Communications Systems DCX 8510-4 - page 77

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 57 53-1002177-05 Determining the status of a WWN card 4 FIGURE 1 7 WWN bezel (logo plate) f or DCX 851 0-4 ...

  • Brocade Communications Systems DCX 8510-4 - page 78

    58 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Determining the status of a WWN card 4 ...

  • Brocade Communications Systems DCX 8510-4 - page 79

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 59 53-1002177-05 Chapter 5 Removal and Replacement Procedures In this chapter • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 • ESD precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems DCX 8510-4 - page 80

    60 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Chassis door removal and replacement 5 Chassis door removal and replacement NOTE The chassis door must be installed to ensure the Br ocade DCX 85 10-4 mee ts EMI and other r eg ul at ory ce rti fi ca t io n s. A dd i ti on ally , if ICL cables are not used, EMI plugs must be in ...

  • Brocade Communications Systems DCX 8510-4 - page 81

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 61 53-1002177-05 Vertical cable manag ement fingers removal and replacement 5 Vertical cable management fing ers removal and replacement The Bro cade DCX 85 10-4 comes equipped with two vertical cable mana gement finger assemblies. It can continue to operat e during the replacemen t of the cabl ...

  • Brocade Communications Systems DCX 8510-4 - page 82

    62 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Port, application, an d encryption blade removal and replacement 5 FIGURE 1 9 Remo val and replacement of the vertical cable management finger assemblies Replacing a cable management finger assembly Complet e the following st eps to replace the cable management finger assembly ...

  • Brocade Communications Systems DCX 8510-4 - page 83

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 63 53-1002177-05 Port, application, and encryption blade removal and replacement 5 Removing a blade For this pr ocedure, refer t o Figure 20 . Complet e the following st eps to remov e a blade. ATTENTION If multiple blades are being repl aced, replace one blade at a time. ATTENTION Follo w elec ...

  • Brocade Communications Systems DCX 8510-4 - page 84

    64 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Port, application, an d encryption blade removal and replacement 5 11 . Perform the appropriat e following actio n based on the type of blade: • For FC8-64, FC8-32E, F C8-48E, FC16-32, FC16- 48 po r t blades, FX8-2 4 application blade, and FS8-18 encryption blade: Open the ej ...

  • Brocade Communications Systems DCX 8510-4 - page 85

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 65 53-1002177-05 Blade filler panel removal and replacement 5 • For FC8-64, FC8-32E, F C8-48E, FC16-32, FC16- 48 po r t blades, FX8-2 4 application blade, and FS8-18 encryption blade: Open the ejectors by r otating them to ward the cent er of the blade face, align the flat side of the blade i ...

  • Brocade Communications Systems DCX 8510-4 - page 86

    66 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Control processor blade (CP8 ) removal and replacement 5 FIGURE 2 1 R emoval and replacement of the blade filler panel Replacing a filler panel Do not lea ve a slo t empty . This will ad versely af fect cooli ng of the chassis. 1. Orient the filler panel. 2. Slide the filler pa ...

  • Brocade Communications Systems DCX 8510-4 - page 87

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 67 53-1002177-05 Control processor blade (CP8) remova l and replacement 5 ATTENTION Brocade’s firm ware upgrade policy f or CP8 blades specifies testing for the current F abric OS release and one version earlier . It is possible to upgrade b y more than one version, but it is a ver y specific ...

  • Brocade Communications Systems DCX 8510-4 - page 88

    68 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Control processor blade (CP8 ) removal and replacement 5 • The CP blade does not respond to T e lnet comm ands, or the serial console is not a vailable. • The slot Sh ow command does not sho w that the CP blade is enabled. • The haShow command indicat es an error . • Th ...

  • Brocade Communications Systems DCX 8510-4 - page 89

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 69 53-1002177-05 Control processor blade (CP8) remova l and replacement 5 6. If both CP blade s are healthy and yo u want to replace the active CP blade, log in t o the active CP blade and run the f o llowing st eps: a. Run the haFailov er command to mak e the standb y CP bl ade the active blad ...

  • Brocade Communications Systems DCX 8510-4 - page 90

    70 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Control processor blade (CP8 ) removal and replacement 5 3. If the faulty CP is the active CP , issue the haFailov er command. Wait until the failov er has complet ed. Use the haShow command t o verify the CPs are sync hronized and the failo ver is complete. Depending on the na ...

  • Brocade Communications Systems DCX 8510-4 - page 91

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 71 53-1002177-05 Control processor blade (CP8) remova l and replacement 5 bring both blades to the same f irmw are versio n. Once you ha ve instal led the replacement CP blade, see “V erifying operation of the new CP blade” for i nfo r ma ti o n a b ou t de ter m in i ng th e version of fir ...

  • Brocade Communications Systems DCX 8510-4 - page 92

    72 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Control processor blade (CP8 ) removal and replacement 5 v7.0.0 5 CP1 FOS v6.3.0a STANDBY * v6.3.0a * Local CP WARNING: The local CP and remote CP have different versions of firmware, please retry firmwaredownload command. 4. Y ou must bring the replacement blade to the same fi ...

  • Brocade Communications Systems DCX 8510-4 - page 93

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 73 53-1002177-05 Control processor blade (CP8) remova l and replacement 5 DCX_124:admin> reboot Broadcast message from root (ttyS0) Fri Jun 18 14:49:45 2010... The system is going down for reboot NOW !! INIT: Switching to runlevel: 6 INIT: Sending processes the TERM signal DCX_124:admin> ...

  • Brocade Communications Systems DCX 8510-4 - page 94

    74 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Control processor blade (CP8 ) removal and replacement 5 • firmw are • firmw areKey • suppor t The firmw are folder contains the f o lder f o r the specific release you are installing. 1. Insert the USB de vice into the activ e CP blade. 2. Attach a serial cable from the ...

  • Brocade Communications Systems DCX 8510-4 - page 95

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 75 53-1002177-05 Control processor blade (CP8) remova l and replacement 5 2010/06/18-14:56:50, [SULB-1002], 910, SLOT 7 | CHASSIS, INFO, Brocade_DCX, Firmwaredownload command has completed successfully. NOTE The time stamp o n the co-cpu may not be in sync with the main cpu on t he blade. T his ...

  • Brocade Communications Systems DCX 8510-4 - page 96

    76 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Core switch blade (CR16-4) removal and replacement 5 4. Pack the f aulty CP blade in the packaging pr ovided with the ne w CP blade, and contact the switch supplier to det ermine the return procedure. 5. Replace the chassis door . If you ha ve one or more application blades in ...

  • Brocade Communications Systems DCX 8510-4 - page 97

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 77 53-1002177-05 Core switch blade (CR16-4) removal and replacement 5 For more informatio n about err or messages, refer to the Fa b r i c O S M e s s a g e Re f e r e n c e . Removing a core switch blade (CR16-4) The Br ocade DCX 85 1 0-4 continues to operate while a core switch blade is being ...

  • Brocade Communications Systems DCX 8510-4 - page 98

    78 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Power supply removal and replacement 5 FIGURE 23 Remov al and replacement of the core switc h blade (CR16-4) Replacing a core switch blade (CR16-4) Complet e the following st eps to replace the core switch blade . ATTENTION Fol l ow E S D p re c a u ti o n s. NOTE The CR16-4 bl ...

  • Brocade Communications Systems DCX 8510-4 - page 99

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 79 53-1002177-05 Power supply remova l and replacement 5 Time and items required The replacement pr ocedure for each po wer supply tak es less than five minutes. A powe r su pply unit or filler panel is required f or the power supply replacement. Identifying power supplies Figure 2 4 shows the ...

  • Brocade Communications Systems DCX 8510-4 - page 100

    80 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Blower assembly removal and replacement 5 FIGURE 25 Remov al and replacement of the power supply Replacing a power supply T o replace a power supply , complete the f ollowing steps. 1. If you are not replacing the power supply , inser t a filler panel into the slot . 2. Other w ...

  • Brocade Communications Systems DCX 8510-4 - page 101

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 81 53-1002177-05 Blower assembly remo val and replacement 5 ATTENTION The Bro cade DCX 85 10-4 can continue operating during the replacement if the second blow er assembly is operating, T o ensure continuous adequate cooling, mainta in two operating blow er assembl ies at all times ex cept for ...

  • Brocade Communications Systems DCX 8510-4 - page 102

    82 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 WWN card removal and replacement 5 FIGURE 26 Remov al and replacement of the blower assembly ‘ Replacing a blower assembly Complete the f ollowing steps t o replace the blower assembly in a chassis. 1. Orient the blow er assembly and sli de it int o the chassis, pushin g firm ...

  • Brocade Communications Systems DCX 8510-4 - page 103

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 83 53-1002177-05 WWN card removal and replacement 5 Time and items required Allow appr oximately 20 minut es to replace a WWN card. The f ollowing items are needed t o replace a WWN card: • Electrostatic discharge (ESD) gr ounding strap • #2 Phillips screwdriv er (required only f or some ve ...

  • Brocade Communications Systems DCX 8510-4 - page 104

    84 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 WWN card removal and replacement 5 ATTENTION Follo w ESD precau tions (see “ESD Precautions” i n your chassis manual). 1. Open a T elnet session to the chassis and log in t o the active CP as admin. The default password is “password”. 2. V erify that you are logged int ...

  • Brocade Communications Systems DCX 8510-4 - page 105

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 85 53-1002177-05 Transceiver remova l and replacement 5 Replacing the WWN card and WWN bezel (logo plate) For the following pr ocedure, please ref er to Figure 2 7 . Complet e the following st eps to replace the bezel and WWN car d. ATTENTION Follo w ESD precau tions (see “ESD Precautions” ...

  • Brocade Communications Systems DCX 8510-4 - page 106

    86 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Transceiver removal and replacement 5 FIGURE 28 Optical transceiver (SFP+) extraction tool Removing an SFP+ transceiver For this pr ocedure, please refer t o Figure 29 . Complet e the following st eps to remov e an SFP+ transceiver . 1. Remo ve any cables that are inserted into ...

  • Brocade Communications Systems DCX 8510-4 - page 107

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 87 53-1002177-05 Transceiver remova l and replacement 5 FIGURE 29 Optical transceiver with bail open Replacing an SFP+ transceiver Complet e the following st eps to replace an SFP+ transc eiver . 1. Making sure that the bail (wire handle) is in the unlocked position, position the optical transc ...

  • Brocade Communications Systems DCX 8510-4 - page 108

    88 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Inter-chass is link (QSFP) ca ble removal and replacement 5 CAUTION The pull tabs are not designed to be be nt. Doin g so may result in damage t o the pull tab. Removing an mSFP transceiver For this pr ocedure, refer t o Figure 30 . Complet e the following st eps to remo ve an ...

  • Brocade Communications Systems DCX 8510-4 - page 109

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 89 53-1002177-05 Inter-chassis link (QSFP) ca ble removal and replacement 5 NOTE T h e Q S F P p o r t s c a n b e u s e d o n l y w i t h a n i n t e r - c h a s s i s link (ICL) license. Af te r the addition or remo val of a license, the license enf o rcement is per formed on the ports only w ...

  • Brocade Communications Systems DCX 8510-4 - page 110

    90 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Inter-chass is link (QSFP) ca ble removal and replacement 5 FIGURE 3 1 QSFP cable and transceiver Time and items required The replacement procedure f or an QSFP cable tak es less than fiv e minut es. Y ou will need a replacement QSFP ca ble and transceiver (if necessary). Remov ...

  • Brocade Communications Systems DCX 8510-4 - page 111

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 91 53-1002177-05 Inter-chassis link (QSFP) ca ble removal and replacement 5 1. If the QSFP transceiv er is being replaced, grasp the bail of the ne w QSFP and push the QSFP into the co nnector on the blade until it is firm ly seat ed. The QSFP is ke yed t o fit into the connector in one wa y . ...

  • Brocade Communications Systems DCX 8510-4 - page 112

    92 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Inter-chass is link (QSFP) ca ble removal and replacement 5 FIGURE 33 QSFP cable connections for Brocade DCX 8510 chassis (sa mple configuration) 1 Chassis 1 - DCX 85 10-8 2 Chassis 2 - DCX 85 10-4 1 2 ...

  • Brocade Communications Systems DCX 8510-4 - page 113

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 93 53-1002177-05 Inter-chassis link (QSFP) ca ble removal and replacement 5 85 10 chassis can be connected in a core/edge configuration. Figure 34 shows two core and four edge chassis. Although 85 1 0-8 chassis are shown in the figure, the chassis can be either 85 10-4 or 85 1 0-8 . The ca blin ...

  • Brocade Communications Systems DCX 8510-4 - page 114

    94 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 85 10 chassis can also be connected in a full mesh conf iguration as shown in Figure 35 . Although 85 10-8 chassis are shown in the figure, the cha ssis can be either 85 10-4 or 85 1 0-8. In this exam ple, the trunk groups ar ...

  • Brocade Communications Systems DCX 8510-4 - page 115

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 95 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 4. Remo ving components fr om the chassis 5. Installing the replacement chassis 6. Installing components int o the new chassis 7. V erifying correct operation of the system 8. Reconnecting the system to t he network and fabri ...

  • Brocade Communications Systems DCX 8510-4 - page 116

    96 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 • Intermitt ent F AUL T Y codes f or blades. R e-seat the blade and visually inspect the right-hand ejector stiffening rail for possible we ar or damage. It is important that the blade ejector handles not slip out during bl ...

  • Brocade Communications Systems DCX 8510-4 - page 117

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 97 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 1. Open a T elnet session and log in to the Brocade DCX 85 1 0-4 as admin . The def ault password is passwor d . E nable the logging fu nction on your T elnet or serial console connection. 2. Back up the current configuration ...

  • Brocade Communications Systems DCX 8510-4 - page 118

    98 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 5. Display and recor d the manufacturer serial numbers. Enter chassisShow ; then c opy the command output in to the config-miscinfo.txt file. “Fact or y Serial Num” and “Serial Num” are list ed un der “Chassis/WWN U ...

  • Brocade Communications Systems DCX 8510-4 - page 119

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 99 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 switchName: switch <output truncated> switch:admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name <output truncated> switch:admin> 7. E n t e r suppor tShow ; then co py the command output ...

  • Brocade Communications Systems DCX 8510-4 - page 120

    100 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 The system is going down for system halt NOW !! DANGER T urn of f the pow er switches and disconnect the power cor ds (D006) 2. Po wer of f the chassis by flipping all A C power switches to the of f position. (The power supp ...

  • Brocade Communications Systems DCX 8510-4 - page 121

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 101 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 CAUTION Use saf e lif ting practices when mo ving the product. (C01 5) ATTENTION A complet ely empty Brocade DCX 85 1 0-4 chassis weighs appr oximately 25.4 kg (56 lb) and requires a hydraulic or assist ed lif t to install i ...

  • Brocade Communications Systems DCX 8510-4 - page 122

    102 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 5. Replace the core switch blades (CR16-4) ( “Core switch blade (C R1 6-4) removal and replacement” ). 6. If ICL cables are no t used, inser t rubber plugs in the QSFP transceiv ers if installed in the core switch blades ...

  • Brocade Communications Systems DCX 8510-4 - page 123

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 103 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 4. Reboot the Brocade DCX 85 10-4. Verifying correct operation of the system Complet e the following st eps to v erify the correct operation of the Brocade D CX 85 1 0-4. 1. Log in t o the Brocade DCX 85 10-4 as admin . swit ...

  • Brocade Communications Systems DCX 8510-4 - page 124

    104 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 1 1 1 820100 id N8 Online FC F-Port 10:00:00:05:33:26:0e:65 2 1 2 820200 id N8 Online FC F-Port 10:00:00:05:33:48:5e:f5 3 1 3 820300 id N8 Online FC F-Port 10:00:00:05:1e:f8:a0:b3 (output truncated) 4. V erify that all the I ...

  • Brocade Communications Systems DCX 8510-4 - page 125

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 105 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 NOTE The por ts and cables used in trunking groups mu st meet specific req uirements. For a list of these requirements, ref er to the F abric OS Adminis trator’s Guide. a. Position one of the transc eivers so that the ke y ...

  • Brocade Communications Systems DCX 8510-4 - page 126

    106 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 FID 1 | 1 | 1 | 1 | 1 | 128 | 128 | 128 | 128 | 128 | <output truncated> switch:admin> 2. Det ermine any differences between the informatio n in the SANafter .txt file and the information in the SANbefo r .txt file ...

  • Brocade Communications Systems DCX 8510-4 - page 127

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 107 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 TA B L E 12 Cable routing table for Br ocade DCX 85 1 0-4 (64 por ts shown) (Continued) Slot/port Cable labels C onnect ...

  • Brocade Communications Systems DCX 8510-4 - page 128

    108 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Brocade DCX 8510-4 chassis removal and replacement 5 50 51 52 53 54 55 56 57 58 59 60 61 62 63 TA B L E 12 Cable routing table for Br ocade DCX 85 1 0-4 (64 por ts shown) (Continued) Slot/port Cable labels C onnected device Slot/port of device Slot Port Switch end Device end ...

  • Brocade Communications Systems DCX 8510-4 - page 129

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 109 53-1002177-05 Appendix A Specifications In this appendix • General specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 09 • System ar chitecture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 0 ? ...

  • Brocade Communications Systems DCX 8510-4 - page 130

    110 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 System architecture A System architecture Ta b l e 1 4 describes the syst em archit ecture of the Br ocade DCX 85 10- 4. Port to port latency Local switching - 800ns (add 400ns for E_Port to E_Po r t ); Blade to blade - 2.4 micr oseconds (add 400ns for E_Port to E_Port) Switch ...

  • Brocade Communications Systems DCX 8510-4 - page 131

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 111 53-1002177-05 System size and weight A System size and weight The weight of the Brocade DCX 85 10-4 can vary considerably depending on the c ombination of blades installed. Use Ta b l e 1 5 and the syst em FRU weights table t o determine the weight of the Brocade DCX 85 1 0-4 with your comb ...

  • Brocade Communications Systems DCX 8510-4 - page 132

    112 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 System blade and FRU weights A System blade and FRU weights Ta b l e 1 6 lists the wei ghts of the co mpatible blades and FRUs. TA B L E 15 System size and w eight System Size or weight Width 43.7 4 cm (1 7 .22 in.) Height 35.6 cm (1 4.0 in./8U) 40.0 cm (15.75 in./9U) with Por ...

  • Brocade Communications Systems DCX 8510-4 - page 133

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 113 53-1002177-05 Facility requirements A Facility requirements The facility whe re the Brocade DCX 85 10-4 is in use must meet the following req uirements to pro vide for corr ect operation: • Adequat e supply circuit, line fusing , and wire si ze, as specified b y the electrical rating on t ...

  • Brocade Communications Systems DCX 8510-4 - page 134

    114 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Fibre Channel port specifications A NOTE The 0 ° to 40 ° Celsius range applies to the ambient air t e mperature at the air intake vents on the nonport side of the Brocade DCX 85 1 0-4. The tem perature inside the Bro cade DCX 85 10-4 can be up t o 75 ° Celsius during operat ...

  • Brocade Communications Systems DCX 8510-4 - page 135

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 115 53-1002177-05 Power specifications A NOTE If an y of the follo wing intelligent blades are used, 200- 24 0 VA C is required: FS8-18, FX8-2 4. Ta b l e 1 8 sho ws the basic power specifications f or each power supply . . The power requirements for a giv en configuration de pend on which blad ...

  • Brocade Communications Systems DCX 8510-4 - page 136

    116 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Power cords A Pow er supply redun dancy is ke y to your installa tion, so any demand must be met with twice the capacity . See Ta b l e 2 0 for po wer supply requirements f or specific demand ranges. In addition t o these tables, you can con sult the power tables in the latest ...

  • Brocade Communications Systems DCX 8510-4 - page 137

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 117 53-1002177-05 Power cords A TA B L E 21 Power cor d types (international) Country Plug style NEMA 5-20P 125V only USA, Canada, Mexico, other locations NEMA L6-20 USA, Canada, Mexico, other locations CEE-7/7 “Schuko” Continental Europe BS-1363A AS 3112 Australia/New Zealand IEC-60309 32A ...

  • Brocade Communications Systems DCX 8510-4 - page 138

    118 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Power cords A Malaysia Alternat e Recommended X Mexico X X X Monaco X X Netherlands X X New Zealan d XX Norway XX Pola nd X X Por tuga l X X Puer to Rico X X X Rus si a X X Saudi Arabia X X Scotland XX Singapor e X X South Afri ca X X Spain X X Sweden XX Switzerland XX Ta i w ...

  • Brocade Communications Systems DCX 8510-4 - page 139

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 119 53-1002177-05 Data transmission ranges A Power cord notice CAUTION This switch might ha ve more than one power co r d. T o reduce the risk of electric shock, disconnect all power cor ds bef ore ser vicing. Power cord notice (Japan DENAN) ATTENTION Nev er use the power co rd pack ed with you ...

  • Brocade Communications Systems DCX 8510-4 - page 140

    120 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Qualified cables for th e FC8-64 port blade A Qualified cables for the FC8-64 port blade Ta b l e 2 3 lists the thir d par ty cables that have been qu alified f or use with the mSFP transceivers in the FC8-64 high density port blade. TA B L E 22 Suppor ted optic s, speeds, cab ...

  • Brocade Communications Systems DCX 8510-4 - page 141

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 121 53-1002177-05 Safety notices A Safety notices When using this product, observe the danger , caut ion, and attention notices in this manual. The notices are accompanied b y symbols that repres ent the sev erity of the safety condition. NOTE T ranslated safety no tices are in the Brocade Pr o ...

  • Brocade Communications Systems DCX 8510-4 - page 142

    122 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Regulatory compliance A • “BSMI statement (T aiwan)” on page 122 • “CE statement” on page 123 • “Canadian requirements” on page 1 23 • “Laser compliance” on page 123 • “Regulat or y compliance standards” on page 123 FCC warning (US only) This equi ...

  • Brocade Communications Systems DCX 8510-4 - page 143

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 123 53-1002177-05 Regulatory compliance A War n i n g : This is Class A product. I n a domestic envir onmen t, this product ma y cause radio inter ference, in which case the user ma y be required to tak e adequate measures. CE statement This is a Class A product. In a domestic en vironm ent, th ...

  • Brocade Communications Systems DCX 8510-4 - page 144

    124 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Environmental regulation compliance A Environmental regulation compliance This section describes the China R oHS env ironmen tal regulat or y compliance requirements f or the Brocade DCX 85 1 0- 4. China RoHS The cont ents included in this section are pe r the requirements of ...

  • Brocade Communications Systems DCX 8510-4 - page 145

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 125 53-1002177-05 Environmental regulatio n compliance A Environmental Protection Us e Period (EPUP) Disclaimer In no ev ent do the EPUP logos sho wn on the prod uct and FR Us alter or e xpand that warranty that Brocade pro vid es with respect to its products as set forth in the applicable cont ...

  • Brocade Communications Systems DCX 8510-4 - page 146

    126 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Environmental regulation compliance A China RoHS hazardous substances/toxic substances (HS/TS) concentration chart In acco rdance with China's Managem ent Measures on t he Control of Polluti on caused b y Electro nic Information products (Decree No. 39 b y the Mini str y ...

  • Brocade Communications Systems DCX 8510-4 - page 147

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 127 53-1002177-05 Environmental regulatio n compliance A ...

  • Brocade Communications Systems DCX 8510-4 - page 148

    128 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Environmental regulation compliance A ...

  • Brocade Communications Systems DCX 8510-4 - page 149

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 129 53-1002177-05 Appendix B Application and Encryption Blades In this appendix • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 • FS8-18 blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems DCX 8510-4 - page 150

    130 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 FX8-24 blade B FX8-24 blade The FX8-2 4 blade has 12 ext ernal Fibre Channe l (FC) SFP por ts suppor ting the Fibre Channel Routing Services and 10 external 1 Gigabit Ethe rnet (GbE or GE) SFP po r ts suppor ting the Fibre Channel Over IP (FCIP) f eature. There are also 2 li c ...

  • Brocade Communications Systems DCX 8510-4 - page 151

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 131 53-1002177-05 FX8-24 bl ade B • Vir tual E_por ts. • FCIP QoS. • Suppor t for 200 ms RTT (on a limit ed number of GbE por ts). • Adaptiv e Rate Limi ting (licensable) . • T CP per formance graphing in Web T ools. • FCIP T unnels. - A maximum of 1 0 FCIP T unnels for all G bE por ...

  • Brocade Communications Systems DCX 8510-4 - page 152

    132 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 FX8-24 blade B ...

  • Brocade Communications Systems DCX 8510-4 - page 153

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 133 53-1002177-05 Appendix C Diagnostics and Troubleshooting In this appendix • Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 • Obtaining chassis and compone nt status . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Brocade Communications Systems DCX 8510-4 - page 154

    134 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Obtaining chassis a nd component status C Obtaining chassis and component status The CLI commands in Ta b l e 2 5 provide status and enviro nmenta l information about the chassis and its components. These commands pr ovide inf orm ation only , and they do not int errupt traf f ...

  • Brocade Communications Systems DCX 8510-4 - page 155

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 135 53-1002177-05 Diagnostics C • Re view the system err or log using the errShow or errDum p commands. Any err ors detect ed during POST are written to the syst em log, which is accessible thr ough the errShow command. For inf ormation about error messages, refer t o the Fabric OS Message Re ...

  • Brocade Communications Systems DCX 8510-4 - page 156

    136 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Troubleshooting C All diagnostic t ests are run at al l suppor ted link speeds. The y might temporarily lock the transmit and receive spe eds to a specific speed. Some diag nostic tests require interconnecting the ports to each other or using loo pback plugs. If por ts are int ...

  • Brocade Communications Systems DCX 8510-4 - page 157

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 137 53-1002177-05 Troubleshooting C Initial set up resul ts in IP address/Domain ID confli ct. The Brocade DCX 85 10-4 w as connected to the fabric befo re being configured. See the F abric OS Administrat or’s Guide fo r configu ration informat ion. LEDs on one o r more components are changin ...

  • Brocade Communications Systems DCX 8510-4 - page 158

    138 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Troubleshooting C One or more por t blad es have either shut down or failed POST as indicated b y the error log. Blades might be overheat ed. Enter the senso rShow command to check the internal temperature readings. If components are ov erheating, shut down port blades as nece ...

  • Brocade Communications Systems DCX 8510-4 - page 159

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 139 53-1002177-05 Appendix D Port Numbering Template Print or copy the followi ng templat es in this appendix and use them t o document the por t numbering pattern f or the Brocad e DCX 85 10-4. These t emplates sho w the following blad es: • FC16-4 core blade ( Figure 36 ) • FC8-64 high de ...

  • Brocade Communications Systems DCX 8510-4 - page 160

    140 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Port Numbering Template D . FIGURE 3 7 FC8-64 port blade . FIGURE 38 FC8-32E port blade . FIGURE 39 FC8-48E port blade 1 Blade Status LE D 5 Port 6 1 LED 2 Bl ad e Powe r LE D 6 Por t 29 L ED 3 Port 63 7 FC por ts 32-63 (bottom t o top) 4P o r t 3 0 8F C p o r t s 0 - 3 1 ( b ...

  • Brocade Communications Systems DCX 8510-4 - page 161

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 141 53-1002177-05 Port Numbering Template D . FIGURE 40 FC1 6-32 por t blade . FIGURE 4 1 FC16- 48 por t blade . . FIGURE 42 FS8-18 encryption blade 1B l a d e P o w e r L E D 5F C p o r t s 1 6 - 2 3 2B l a d e S t a t u s L E D 6F C p o r t s 0 - 7 3 FC ports 2 4-3 1 7 FC ports 8-15 4 Port an ...

  • Brocade Communications Systems DCX 8510-4 - page 162

    142 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 Port Numbering Template D FIGURE 43 FX8-2 4 extension blade 1 1 0 GbE por ts 0-1 5 FC por ts 0-5 21 G b E p o r t s 0 - 3 6B l a d e P o w e r L E D 3 1 GbE por ts 4-9 7 Blade Status LED 4F C p o r t s 6 - 1 1 2 1 5 4 3 7 6 ...

  • Brocade Communications Systems DCX 8510-4 - page 163

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 143 53-1002177-05 Index Numerics 10 GbE ports , 130 A airflow, requirement , 114 altitude, requirement , 113 ambient temperature, requirement , 113 ANSI protocol , 109 application blade determining status , 44 replacing , 62 B back up config uration , 36 backbone configuration , 24 bandwidth, a ...

  • Brocade Communications Systems DCX 8510-4 - page 164

    144 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 command chassisName , 28 configShow , 36 configUpload , 36 configUpload -vf , 36 configure , 29 , 31 date , 29 fabricShow , 29 , 33 , 36 frureplace , 83 ipaddrSet , 26 ipaddrSet -chassis , 26 ipaddrSet -cp0 , 27 ipaddrSet -cp1 , 27 ipAddrShow , 26 , 36 licenseIdShow , 32 licen ...

  • Brocade Communications Systems DCX 8510-4 - page 165

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 145 53-1002177-05 Fibre Channel port specifications , 114 Fibre Channel Association , xix Fibre Channel Routing Services , 130 field replaceable units See FRU field-replaceable units See FRUs filler panel, replacing , 65 firmwaredownload from USB , 74 frame size, maximum , 110 frureplace comman ...

  • Brocade Communications Systems DCX 8510-4 - page 166

    146 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 latency port to port , 110 switch , 110 LEDs blower assembly , 55 CP blade , 50 CR blade , 52 port blade , 48 power supply , 54 troubleshooting , 137 license, chassis software , 32 licenseIdShow command , 32 licenseShow comman d , 32 local time, synchronizin g , 31 logout comm ...

  • Brocade Communications Systems DCX 8510-4 - page 167

    Brocade DCX 8510-4 Backbone Hardware Reference M anual 147 53-1002177-05 safety notices , 121 security , 10 serial connection establishing , 24 troubleshooting , 136 serial port logout , 27 serviceability, features , 9 setting time zone , 30 SFPs , 32 shock, requirement , 113 site planning , 15 size and weight , 111 software features , 9 specificat ...

  • Brocade Communications Systems DCX 8510-4 - page 168

    148 Brocade DCX 8510-4 Backbone Hard ware Reference Manual 53-1002177-05 ...

Fabbricante Brocade Communications Systems Categoria Computer Hardware

I documenti che otteniamo dal fabbricante del dispositivoBrocade Communications Systems DCX 8510-4 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Brocade Communications Systems
- manuali per l’uso DCX 8510-4
- schede prodotto Brocade Communications Systems
- opuscoli
- o etichette energetiche Brocade Communications Systems DCX 8510-4
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Brocade Communications Systems DCX 8510-4.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Brocade Communications Systems DCX 8510-4, manuali di manutenzione, brevi manuali o manuali utente Brocade Communications Systems DCX 8510-4. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Brocade Communications Systems DCX 8510-4.

Manuali per l’uso simili

Manuale completo del dispositivo Brocade Communications Systems DCX 8510-4, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Brocade Communications Systems DCX 8510-4 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Brocade Communications Systems DCX 8510-4.

Il manuale per l’uso completo Brocade Communications Systems, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Brocade Communications Systems DCX 8510-4 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Brocade Communications Systems DCX 8510-4, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Brocade Communications Systems DCX 8510-4 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Brocade Communications Systems DCX 8510-4 - che ci dovrebbe aiutare nei primi passi durante l'uso Brocade Communications Systems DCX 8510-4
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Brocade Communications Systems DCX 8510-4
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Brocade Communications Systems DCX 8510-4 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Brocade Communications Systems DCX 8510-4?

Utilizza il modulo sottostante

Se non hai risolto il problema con Brocade Communications Systems DCX 8510-4 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Brocade Communications Systems DCX 8510-4 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)