Italiano dropdown-ico

Manuale per l’uso Zenoah PE2500H

20 pagine 0.23 mb
Scarica

Vai alla pagina of 20

Summary
  • Zenoah PE2500H - page 1

    PE2500H W A TER PUMP T1056-93510 (904) OPERA T OR’S MANUAL • Before using our water pumps, please read this manual carefully to understand the proper use of your unit. • Keep this manual handy. W ARNING ...

  • Zenoah PE2500H - page 2

    ...

  • Zenoah PE2500H - page 3

    SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. ■ WARNINGS IN THE MANUAL This mark indicates i ...

  • Zenoah PE2500H - page 4

    ❲ 4 ❳ For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to take a mistake. (a) The port to refuel the "MIX GASOLINE" Position: FUEL TANK CAP (b) The direction to close the choke Position: AIR CLEANER COVER (c) The direction to open the choke Position: ...

  • Zenoah PE2500H - page 5

    2. For safe operation • Before operating the machine, be sure to read through this manual carefully and follow proper operating instructions. • Never allow children or anyone unable to fully understand the instructions given in the manual to use the machine. ■ NOTES FOR OPERATION • Before using the machine, read this manual carefully to und ...

  • Zenoah PE2500H - page 6

    ❲ 6 ❳ • Do not touch the spark plug or the plug wire while the engine is in operation. They may cause an electric shock. • Do not touch metallic parts such as the muffler, spark plug, etc. with bare hands during the operation of engine or immediately after a stop. They may be very hot and cause burns. • Apply isolation measures to keep ch ...

  • Zenoah PE2500H - page 7

    3. Parts Location 1. Air cleaner 2. Throttle lever 3. Spark plug 4. Handle 5. Self-suction plug 6. Discharge port 7. Suction port 8. Hose coupling 9. Clump 10. Suction hose 11. Strainer 12. Clump 13. Drain plug 14. Base 15. Fuel tank 16. Engine stop button 17. Fuel tank cap 18. Starter knob 19. Exhaust vent 20. Engine cover ❲ 7 ❳ ...

  • Zenoah PE2500H - page 8

    ❲ 8 ❳ 4. Specifications MODEL PE2500H Pump Type ················································································· Self suction type volute pump Suction/Discharge port diameter ····································? ...

  • Zenoah PE2500H - page 9

    • Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m(10ft) away from the fueling point before starting the engine. • The RedMax engines are lubricated by oil specially formulated ...

  • Zenoah PE2500H - page 10

    ❲ 10 ❳ other containers. 6. Indicate the contents on outside of container for easy identification. ■ FUELING THE UNIT 1. Untwist and remove the fuel cap. Rest the cap on a dustless place. 2 . Put fuel into the fuel tank to 80% of the full capacity. 3. Fasten the fuel cap securely and wipe up any fuel spillage around the unit. 1. Select bare g ...

  • Zenoah PE2500H - page 11

    • As a suction hose, be sure to use attached suction hose(nominal diameter 25mm x 3m) or an equivalent ‘water suction hose’ only. • Securely connect hoses with attached hose couplings and clumps. • If the suction hose connection is loose, or a packing in hose coupling has been lost or damaged, air may be sucked into the pump and interrupt ...

  • Zenoah PE2500H - page 12

    ❲ 12 ❳ • Fuel(Gasoline) is highly flammable and incorrect handling will cause fire accident. Strictly avoid smoking or fire during mixing or supplying the fuel. • Be sure to stop the engine and allow it to be cooled before refueling. • Spilled fuel shall be completely wiped away with wiping cloth, etc. before restarting the engine. • Do ...

  • Zenoah PE2500H - page 13

    7. Operation ■ STARTING ENGINE 1 . Push a priming pump at lower side of the carburetor several times until you can see the fuel flows into a clear tube. (F3) 2. Put the choke lever to CLOSE position, and set the throttle lever 1/3 to 1/2 open from fully returned position. (F3) Choke lever to OPEN for restarting immediately after stopping engine. ...

  • Zenoah PE2500H - page 14

    ■ STOPPING ENGINE In case of emergency, immediately stop the engine. 1. Return the throttle lever and run engine 1 to 2 minutes for cooling down. 2. Press the engine stop button(yellow) until the engine completely stops. (F5) ■ AFTER USE 1. Release a drain plug at lower part of the pump and drain the water out of the pump. (F6) 2. Disconnect th ...

  • Zenoah PE2500H - page 15

    ❲ 15 ❳ 8. Maintenance • Be sure to stop the engine and keep off fire for inspection and maintenance. • Always use our genuine parts/oils or our specified goods for replacement. ■ AIR CLEANER After every 25 hours of operation, release the air cleaner cover and remove dusts. In case the element is dirty, carefully wash it with warm water co ...

  • Zenoah PE2500H - page 16

    ❲ 16 ❳ • Operation with no fuel filter cause clogging of the carburetor. Fuel Filter Part No. 3302-85400 ■ SPARK PLUG Do not touch the spark plug with bare hands immediately after stopping the engine. There is a possibility of burns by high temperature. After every 25 hours of operation, remove the spark plug and clean the electrode using w ...

  • Zenoah PE2500H - page 17

    ■ ADJUSTING IDLE SPEED Engine idle speed is already adjusted at shipping. However, if the engine stalls due to too low engine speed when fully returning the throttle lever or if you feel it to be too high, adjust the speed. Idle adjusting screw is on the upper part of the carburetor. Engine speed increases with clockwise turning of the screw and ...

  • Zenoah PE2500H - page 18

    ❲ 18 ❳ 9. Storage ■ STORING FOR LONG PERIOD • To stop using your machine for a long period, drain fuel from the fuel tank and the carburetor before storing it. Fuel left behind inside there for long period may clog the carburetor and cause engine troubles as no starting of engine or reduced engine output. • Leave the fuel cap loose during ...

  • Zenoah PE2500H - page 19

    10. T roubleshooting guide COUNTERMEASURE Change with proper fuel(see Page 9) Open choke and repeat pulling rope (see Page 13) cleaning Cleaning of electrode or replace plug (see Page 16) Top up with water(see Page 11) Tighten securely not to suck air Replace with proper one(ask for service) Replace with proper one Extend and stretch hose, open val ...

  • Zenoah PE2500H - page 20

    Warranty certificate Komatsu Zenoah Co. The Komatsu Zenoah product model No.PE2500H is covered by a Warranty of 6 months from the following date of purchase. In the case of professional machine used for professional work, such machines are covered by a Warranty of 3 months. We undertake according to our ability to supply free of charge all parts fo ...

Fabbricante Zenoah Categoria Plumbing Product

I documenti che otteniamo dal fabbricante del dispositivoZenoah PE2500H possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Zenoah
- manuali per l’uso PE2500H
- schede prodotto Zenoah
- opuscoli
- o etichette energetiche Zenoah PE2500H
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Zenoah PE2500H.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Zenoah PE2500H, manuali di manutenzione, brevi manuali o manuali utente Zenoah PE2500H. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Zenoah PE2500H.

Manuali per l’uso simili

Manuale completo del dispositivo Zenoah PE2500H, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Zenoah PE2500H dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Zenoah PE2500H.

Il manuale per l’uso completo Zenoah, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Zenoah PE2500H - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Zenoah PE2500H, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Zenoah PE2500H che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Zenoah PE2500H - che ci dovrebbe aiutare nei primi passi durante l'uso Zenoah PE2500H
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Zenoah PE2500H
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Zenoah PE2500H in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Zenoah PE2500H?

Utilizza il modulo sottostante

Se non hai risolto il problema con Zenoah PE2500H con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Zenoah PE2500H è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)