Italiano dropdown-ico

Manuale per l’uso Gold's Gym GGSY3066.1

36 pagine 2.25 mb
Scarica

Vai alla pagina of 36

Summary
  • Gold's Gym GGSY3066.1 - page 1

    CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Model No. GGSY3066.1 Serial No. Write the serial number in the space above for future reference. QUESTIONS? As a manufacturer , we are com- mitted to providing complete cus- tomer satisfaction. I f you have questions, o ...

  • Gold's Gym GGSY3066.1 - page 2

    W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . ...

  • Gold's Gym GGSY3066.1 - page 3

    W ARNING: T o reduce the risk of serious injury , read all important precautions and instructions in this manual and all warnings on the weight system before using the weight system. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. IMPORT ANT PRECAUTIONS 3 1. Before beginning any ...

  • Gold's Gym GGSY3066.1 - page 4

    4 Backrest Curl Pad Shroud Weight Backrest Adjustment Knob Seat Adjustment Knob Ankle Strap Handle Curl Adjustment Knob Frame Butterfly Arm Seat Right Side Left Side Note: The terms “right side” and “left side” are determined relative to a person facing away from the weight system; they do not correspond to right and left on the draw- ings ...

  • Gold's Gym GGSY3066.1 - page 5

    M10 Nylon Locknut (77) M8 W asher (103) M8 Nylon Locknut (78) M6 W asher (1 14) M4 W asher (104) M6 Nylon Locknut (107) M4 x 12mm Self-tapping Screw (102) M4 x 16mm Self-tapping Screw (1 10) M6 x 20mm Screw (88) M8 x 22mm Shoulder Bolt (90) M10 x 75mm Button Screw (1 18) M10 x 20mm Button Screw (96) 19mm Spacer (67) M10 W asher (80) M10 Large W ash ...

  • Gold's Gym GGSY3066.1 - page 6

    M6 x 38mm Screw (89) M6 x 28mm Bolt (94) M6 x 65mm Button Screw (91) M8 x 75mm Carriage Bolt (83) M8 x 80mm Bolt (100) M8 x 65mm Bolt (101) M10 x 120mm Bolt (1 15) M10 x 82mm Button Screw (92) M10 x 61mm Bolt Set (1 16) M8 x 69mm Shoulder Bolt (87) M10 x 60mm Bolt (79) M10 x 85mm Bolt (81) M10 x 75mm Bolt (82) M10 x 80mm Bolt (84) M10 x 65mm Bolt ( ...

  • Gold's Gym GGSY3066.1 - page 7

    7 Backrest Adjustment Knob (53) Curl Adjustment Knob (58) Seat Adjustment Knob (52) ...

  • Gold's Gym GGSY3066.1 - page 8

    8 ASSEMBL Y The Four Stages of the Assembly Process Frame Assembly —Y ou will begin by assembling the base and the uprights that form the skeleton of the weight system. Arm Assembly —During this stage you will assemble the arms and the leg lever . Cable Assembly —During this stage you will attach the cables and pulleys that connect the arms t ...

  • Gold's Gym GGSY3066.1 - page 9

    9 3 10 78 75 104 11 0 78 83 1 1 3. Attach the Front Leg (10) to the Base (1) with the two M8 x 75mm Carriage Bolts (83) and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. Attach the Leg Lever Bumper (75) to the Front Leg (10) with an M4 x 16mm Self-tapping Screw (1 10) and an M4 Washer (104). Make sure that the end of the Leg Le ...

  • Gold's Gym GGSY3066.1 - page 10

    10 4. Attach the Frame (9) to the Upright (2) with two M8 x 80mm Bolts (100), two M8 W ashers (103), and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. Attach the Frame (9) to the Front Leg (10) with two M8 x 65mm Bolts (101), two M8 W ashers (103), and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. 4 100 100 ...

  • Gold's Gym GGSY3066.1 - page 11

    11 9. Attach a Shroud Cover (23) to the Left and Right Shrouds (21, 22) with two M6 x 28mm Bolts (94), four M6 W ashers (1 14), and two M6 Nylon Locknuts (107). Attach the Shroud Cover (23) to the T op Frame (4) with four M4 x 16mm Self-tapping Screws (1 10) and four M4 Washers (104). See the inset drawing and attach the other Shroud Cover (23) in ...

  • Gold's Gym GGSY3066.1 - page 12

    12 10. Attach the Butterfly Frame Brace (6) to the Upright (2) with two M8 x 80mm Bolts (100), two M8 W ashers (103), and two M8 Nylon Locknuts (78). Do not tighten the Nylon Locknuts yet. 1 1. Apply grease in the locations shown. Insert a 56.5mm Spacer (69) into the indicated hole in the Leg Lever (12). Attach the Leg Lever to the Front Leg (10) w ...

  • Gold's Gym GGSY3066.1 - page 13

    13 13. Apply grease in the locations shown and attach the Left Butterfly Bracket (28) to the Butterfly Frame (5) with an M10 x 80mm Bolt (84) and an M10 Nylon Locknut (77). Repeat this step for the Right Butterfly Bracket (29). Tighten the Nylon Locknuts (77, 78, 107) used in steps 2 through 13. 14. Attach a Butterfly Handle (27) to the Left Butter ...

  • Gold's Gym GGSY3066.1 - page 14

    14 16. Position a Press Arm Handle (17) with the 90° bend oriented as shown. Attach the Press Arm Handle to the Right Press Arm (16) with two M10 x 65mm Button Bolts (106), four M10 W ashers (80), four 1 1mm Spacers (99), and two M10 Nylon Locknuts (77). Repeat this step for the Left Press Arm (not shown). 17. Attach the Left Press Arm (15) to the ...

  • Gold's Gym GGSY3066.1 - page 15

    15 19. See the CABLE DIAGRAM on page 28 to identify the cables as you assemble them. Identify the Butterfly Cable (50). Grease an M8 x 22mm Shoulder Bolt (90). Attach the Cable to the Left Butterfly Bracket (28) with the Shoulder Bolt and an M8 Nylon Locknut (78). Make sure that the flat edge of the Cable is against the Butterfly Arm. Do not overti ...

  • Gold's Gym GGSY3066.1 - page 16

    16 22. Wrap the Butterfly Cable (50) over a “V”-pulley (47). Attach the “V”-pulley , a Long Cable T rap (57), an M10 W asher (80), and two Guards (54) to the Upright (2) with an M10 x 60mm Bolt (79) and an M10 Nylon Locknut (77). 23. Grease an M8 x 22mm Shoulder Bolt (90). Attach the Butterfly Cable (50) to the Right Butterfly Arm (29) with ...

  • Gold's Gym GGSY3066.1 - page 17

    17 25. Route the Lat Cable (49) over a Thin Pulley (24) and down through the T op Frame (4). Hold the Thin Pulley inside the T op Frame. Next, insert an M10 x 80mm Bolt (84) through an M10 W asher (80), a 19mm Spacer (67), the T op Frame, and the Thin Pulley . 26. Wrap the Lat Cable (49) under a 90mm Pulley (48). Attach the Pulley , a Cable T rap ( ...

  • Gold's Gym GGSY3066.1 - page 18

    18 28. Wrap the Lat Cable (49) around a 90mm Pulley (48) and route the Cable down through the T op Frame (4). Attach the Pulley inside the T op Frame with an M10 x 80mm Bolt (84), two M10 W ashers (80), two 19mm Spacers (67), and an M10 Nylon Locknut (77). 29. Set an M12 Large W asher (98) on top of the Weight Tube (20). Thread the M12 Nut (1 12) a ...

  • Gold's Gym GGSY3066.1 - page 19

    19 31. Attach a 90mm Pulley (48) to the Front Leg (10) with an M10 x 65mm Bolt (85), two M10 W ashers (80), two 13mm Steel Spacers (109), and an M10 Nylon Locknut (77). Make sure that the Leg Lever Cable (51) is under the Pulley . 32. Route the Leg Lever Cable (51) under the 89.5mm Spacer (59), through the Upright (2), and under the indicated rod i ...

  • Gold's Gym GGSY3066.1 - page 20

    20 34. Wrap the Leg Lever Cable (51) under a 90mm Pulley (48). Attach the Pulley to the Base (1) with an M10 x 45mm Bolt (86), two Half Guards (55), and an M10 Nylon Locknut (77). 35. Wrap the Leg Lever Cable (51) over a 90mm Pulley (48). Attach the Pulley to the Double “U”- bracket (61) with an M10 x 45mm Bolt (86), two Half Guards (55), and a ...

  • Gold's Gym GGSY3066.1 - page 21

    21 37. Wrap the Leg Lever Cable (51) under a 90mm Pulley (48). Attach the Pulley to the Right Press Arm (16) with an M10 x 50mm Bolt (97), two Half Guards (55), a Cable T rap (56), an M10 W asher (80), and an M10 Nylon Locknut (77). Make sure that the Cable T rap and Half Guards are ori- ented as shown. 38. Wrap the Leg Lever Cable (51) around a ? ...

  • Gold's Gym GGSY3066.1 - page 22

    22 40. Attach the Leg Lever Cable (51) to the Upright (2) with the M10 x 120mm Bolt (1 15), an M10 W asher (80), a 7mm Spacer (1 1 1), and an M10 Nylon Locknut (77). Make sure that the flat edge of the Cable is against the Spacer . 41. Attach the Right Butterfly Pad (35) to the Right Butterfly Arm (26) with two M6 x 65mm Button Screws (91) and two ...

  • Gold's Gym GGSY3066.1 - page 23

    23 43. Attach the Seat (32) to the Seat Frame (8) with two M6 x 20mm Screws (88), an M6 x 38mm Screw (89), and an M6 W asher (1 14). Insert the Seat Frame (8) into the Frame (9). T ighten the Seat Adjustment Knob (52) into the Frame and the Seat Frame. Make sure that the Adjustment Knob passes through one of the holes in the Seat Frame. 44. Insert ...

  • Gold's Gym GGSY3066.1 - page 24

    24 46. Attach the Curl Pad (33) to the Curl Post (1 1) with two M6 x 20mm Screws (88). 47. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the following page. Before using the weight system, pull each cable a few times to make sure that the cables move smoothly ove ...

  • Gold's Gym GGSY3066.1 - page 25

    25 This section explains how to adjust the weight system. Refer to the accompanying exercise guide to see the cor- rect form for each exercise. Make sure that all parts are properly tightened each time the weight system is used. Replace any worn parts immediately . The weight system can be cleaned with a damp cloth and a mild, non-abrasive detergen ...

  • Gold's Gym GGSY3066.1 - page 26

    26 USING THE CURL P AD T o use the Curl Pad (33), remove the indicated 50mm Round Inner Cap (39) and insert the Curl Post (1 1) into the Front Leg (10). T ighten the Curl Adjustment Knob (58) into the Front Leg. Make sure that the Adjustment Knob passes through a hole in the Curl Post. When you are performing exercises that do not require the Curl ...

  • Gold's Gym GGSY3066.1 - page 27

    27 WEIGHT RESIST ANCE CHART The chart below shows the approximate weight resistance at each exercise station. Weight resistance shown for the butterfly arm station is for each arm. Note: The actual resistance at each station may vary due to differ- ences in individual weight plates as well as friction between the cables, pulleys, and weight guides. ...

  • Gold's Gym GGSY3066.1 - page 28

    28 CABLE DIAGRAM The diagram below shows the proper routing of the cables. The numbers show the proper route for that cable. Use the diagram to make sure that the cables, cable traps, and finger guards have been assembled correctly . If the cables are not assembled correctly , the weight system will not function properly and damage may occur . Make ...

  • Gold's Gym GGSY3066.1 - page 29

    29 Make sure that all parts are properly tightened each time the weight system is used. Replace any worn parts immediately . The weight system can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents. TIGHTENING THE CABLES Woven cable, the type of cable used on the weight system, can stretch slightly when it is first ...

  • Gold's Gym GGSY3066.1 - page 30

    30 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them close to their maximum capacity . Y our mus- cles will continually adapt and grow as you progres- sively increase the intensity of your exercise. Y ou can adjust the intensity level of an individual exercise in two w ...

  • Gold's Gym GGSY3066.1 - page 31

    31 O P Q R S T U V X W N M J G F H I K E C D B A L MUSCLE CHART A. Sternomastoid (neck) B. Pectoralis Major (chest) C. Biceps (front of arm) D. Obliques (waist) E. Brachioradials (forearm) F . Hip Flexors (upper thigh) G. Abductor (outer thigh) H. Quadriceps (front of thigh) I. Sartorius (front of thigh) J. T ibialis Anterior (front of calf) K. Sol ...

  • Gold's Gym GGSY3066.1 - page 32

    P ART LIST—Model No. GGSY3066.1 R0907A Key No. Qty . Description Key No. Qty . Description 1 1 Base 2 1 Upright 3 1 Stabilizer 4 1 T op Frame 5 1 Butterfly Frame 6 1 Butterfly Frame Brace 7 1 Backrest Frame 8 1 Seat Frame 9 1 Frame 10 1 Front Leg 1 1 1 Curl Post 12 1 Leg Lever 13 2 Pad T ube 14 1 Lock Plate 15 1 Left Press Arm 16 1 Right Press Ar ...

  • Gold's Gym GGSY3066.1 - page 33

    33 101 2 M8 x 65mm Bolt 102 13 M4 x 12mm Self-tapping Screw 103 1 1 M8 W asher 104 9 M4 Washer 105 2 M10 Large Washer 106 6 M10 x 65mm Button Bolt 107 4 M6 Nylon Locknut 108 2 21mm Steel Spacer 109 8 13mm Steel Spacer 1 10 9 M4 x 16mm Self-tapping Screw 1 1 1 1 7mm Spacer 1 12 1 M12 Nut 1 13 1 M10 x 70mm Bolt 1 14 14 M6 W asher 1 15 1 M10 x 120mm B ...

  • Gold's Gym GGSY3066.1 - page 34

    3 15 16 17 17 18 19 19 20 21 22 23 23 38 38 40 40 48 48 48 48 49 55 55 55 55 55 55 55 55 56 56 56 56 59 60 60 108 70 71 72 73 76 77 77 77 106 77 80 80 80 80 80 80 80 80 80 93 93 77 81 97 94 94 102 102 94 94 102 98 97 97 77 77 85 80 11 0 11 0 77 99 99 99 99 99 102 11 4 11 4 11 4 11 4 107 11 4 11 4 11 4 11 4 107 11 0 104 104 80 80 11 2 106 106 96 EXP ...

  • Gold's Gym GGSY3066.1 - page 35

    1 2 4 5 6 7 8 9 10 11 12 13 13 14 25 27 28 30 31 32 33 34 36 36 36 36 37 37 37 37 38 39 39 38 41 41 41 41 42 43 44 46 46 45 45 47 47 47 48 24 48 48 48 48 48 48 48 48 49 50 51 51 52 58 53 54 54 54 55 55 55 55 55 55 55 55 55 55 55 56 57 57 57 59 61 62 63 64 64 65 66 109 109 68 68 109 68 68 67 67 67 67 67 74 74 75 77 77 78 77 78 77 77 78 78 78 78 78 7 ...

  • Gold's Gym GGSY3066.1 - page 36

    Part No. 250528 R0907A Printed in China © 2007 ICON IP , Inc. T o order replacement parts, please see the front cover of this manual. T o help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) • the name of the product (se ...

Fabbricante Gold's Gym Categoria Home Gym

I documenti che otteniamo dal fabbricante del dispositivoGold's Gym GGSY3066.1 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Gold's Gym
- manuali per l’uso GGSY3066.1
- schede prodotto Gold's Gym
- opuscoli
- o etichette energetiche Gold's Gym GGSY3066.1
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Gold's Gym GGSY3066.1.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Gold's Gym GGSY3066.1, manuali di manutenzione, brevi manuali o manuali utente Gold's Gym GGSY3066.1. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Gold's Gym GGSY3066.1.

Manuali per l’uso simili

Manuale completo del dispositivo Gold's Gym GGSY3066.1, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Gold's Gym GGSY3066.1 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Gold's Gym GGSY3066.1.

Il manuale per l’uso completo Gold's Gym, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Gold's Gym GGSY3066.1 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Gold's Gym GGSY3066.1, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Gold's Gym GGSY3066.1 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Gold's Gym GGSY3066.1 - che ci dovrebbe aiutare nei primi passi durante l'uso Gold's Gym GGSY3066.1
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Gold's Gym GGSY3066.1
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Gold's Gym GGSY3066.1 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Gold's Gym GGSY3066.1?

Utilizza il modulo sottostante

Se non hai risolto il problema con Gold's Gym GGSY3066.1 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Gold's Gym GGSY3066.1 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)