-
Haier HWM90-98 - page 1
Computerized Full-auto W ashing Machine Contents Before using Using Process Names of the parts..........................The 2nd cover Safety precautions...............................................1 Installation and adjustment.................................3 Install the water inlet hose....................................5 Preparation before wa ...
-
Haier HWM90-98 - page 2
...
-
Haier HWM90-98 - page 3
Saf ety pr ecautions Earth The ventilation holes at the bottom Soft object Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning. Pl ea s e p ...
-
Haier HWM90-98 - page 4
Dismantle Install Saf ety pr ecautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow . T ake special care of the children. Do not decompose, repair or alter the machine by yourself. Do not put any hot or heavy items (such as the kettle with hot water) on the washing machine Do not wash laundries with vo ...
-
Haier HWM90-98 - page 5
Inner cover shaft Outer tub cover shaft groove Outer tub cover Inner cover Install the bottom plate After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with eight screws by a cross screwdriver , then lift the machine up gently . ...
-
Haier HWM90-98 - page 6
1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way . 2. Do not ramp or press the drain hose. 3. If the drain hose is too long, cut it at mid point. T o make smooth drainage, cut the front end of the hose slantingly . 4. If extra drain hose is need ...
-
Haier HWM90-98 - page 7
The exit end face of the faucet Confirm the water faucet Connection between the water inlet hose jointer and the water faucet water faucet, suitable water faucet, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat an d smooth. If not please file it to avoid leakage. 2 Loosen the s ...
-
Haier HWM90-98 - page 8
Connection between the water inlet hose and the washer Dismantle the water inlet hose Connection between the jointer of the water inlet hose and the water inlet hose Check the connection between the jointer of the water inlet hose and the water faucet 1. Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged ...
-
Haier HWM90-98 - page 9
Using process Using process 1 Pr epar a tion before washing Pay attention to followings before washing the laundries Preparation before washing 1. Connect the water inlet hose. Open the water faucet. 2. Confirm that the washing machine is earthed reliably . Then insert the power plug into the receptacle. The earth terminal shall not link to gas pip ...
-
Haier HWM90-98 - page 10
Reference weight of the laundries: working suit up,down jeans about 800g The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity . T he largest capacity of this machine is ...
-
Haier HWM90-98 - page 11
...
-
Haier HWM90-98 - page 12
TIMES WASH RI NSE MINUTES MINUTES MINUTES SOAK DISINFECT SPI N /DISINFECT + DOUBLE DRIVE WASH WASH WITH STERILIZA TION DIGIT AL TUBE DISPLA Y INTEGRA TED WITH THE MERITS OF THREE KINDS OF W ASHERS Description of the function of the buttons 4 Use the oper a tion buttons Mode and meaning of the indicator the frame of the indicator is on : indicate th ...
-
Haier HWM90-98 - page 13
Page 16 This function is used to protect the children and prevent them from changing the washing procedure. Push and hold the WA TER LEVEL button and SPIN/DISINFECT button, then push down the POWER ON/OFF button. The digitron displays " " . Y ou can continue setting desired washing procedures. After setting, push down the ST ART/P AUSE bu ...
-
Haier HWM90-98 - page 14
Page 1 1 POWER ON/OFF PROGRAM WAS H RINSE SPIN/DISINFECT TIMES Steps of using the operation buttons and description of the steps Push the "POWER ON/OFF " button to switch on the power . 2 Push the "PROGRAM" button to select suitable automatic program. After switching on the power , the machine will set normal program automatical ...
-
Haier HWM90-98 - page 15
Page 9 Page 1 1 Program W ater level W ash(minutes) 1~10 About About 20 Normal About 5 1~10 About 10-14 About 25-29 3 About 2 About 6 Common 1~10 About 34-36 About 9-1 1 1~10 About 10 About 48 About 7 1~10 About 20 About 54 Carpeting Rinse twice, about 5 each time About 3 1~10 About 3 About 25 1~10 A b o u t5 A b o u t4 A b o u t3 0 WA TER LEVEL Af ...
-
Haier HWM90-98 - page 16
ST ART TIME REMAINED(MINUTE) RESERVE(HOURS LA TER) RESERVE Push the "ST ART/P AUSE" button PA U S E 5 Close the top lid 6 Finish washing After Finishing wash alarm automatically As the top lid opened ,the Washer will automatically give an alarm and stop running , exclusively during supplying water and rinsing. After finishing wash it&apos ...
-
Haier HWM90-98 - page 17
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time ( about 1 hour), then close the top lid. 4.Hang up the power cord and drain hose. 3.Be sure to pull off the power plug before maintenance. 2.Do not ...
-
Haier HWM90-98 - page 18
There may be some water flowing out of the drain hose in the first use of the machine. It is the water remained performance inspection by the factory . Common phenomena Phenomena Explanation The spinning is intermittent when it starts. The wash procedure pauses. Select spin program, but it does not work. Balance the laundries to avoid slanting. The ...
-
Haier HWM90-98 - page 19
P ac king list Computerized Automatic washing machine Components of the water inlet hose One Between the upper cushion of the washing machine package and the upper seal of the package carton Inside the accessory bag Eight T apping screws Bottom plate One Inner cover component One Inside the accessory bag 17 ...
-
Haier HWM90-98 - page 20
Specifica tion table Model HWM90-98 Rated voltage frequency 220V -240V ~ 50Hz Rated washing / spinning capacity 9.0kg Water level/W ater quantity (about) 1/18L 2/24L 3/30L 4/36L 5/42L 6/48L 7/54L 8/60L 9/66L 10/68L Max water consumption About 120L (Highest water level; Normal program) Water Injection pressure 0.03MPa~0.78MPa Rated washing input pow ...
Hai una domanda su Haier HWM90-98?
Utilizza il modulo sottostante
Se non hai risolto il problema con Haier HWM90-98 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Haier HWM90-98 è probabile che voglia condividere il modo di risolverlo.