Manuale per l’uso RedMax CHTZ2500

36 pagine 0.48 mb
Scarica

Vai alla pagina of 36

Summary
  • RedMax CHTZ2500 - page 1

    The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. WARNING HTZ2500 CHTZ2500 OWNER / OPERA T OR MANUAL HEDGE-TRIMMERS HTZ2500 CHTZ2500  Thank you for purchasing a RedMax product. Before using our hedge-trimmers, please read this manual carefully to un ...

  • RedMax CHTZ2500 - page 2

    ...

  • RedMax CHTZ2500 - page 3

    SAFETY FIRST Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and for this reason you are requested to read all such instructions carefully and follow them without fail. ■ WARNINGS IN THE MANUAL This mark indicates i ...

  • RedMax CHTZ2500 - page 4

    1. Parts location 1 2 2 3 4 5 5 6 6 7 8 8 9 9 10 11 [ HTZ2500 ] [ CHTZ2500 ] 3 ❲ 4 ❳ 1. Right handle 2. Fuel tank 3. Starter 4. Left handle 5. Throttle lever 6. Ignition switch 7. Throttle Cable 8. Muffler 9. Blade 10. Front handle 11. Rear handle ...

  • RedMax CHTZ2500 - page 5

    2. Specifications Engine Type ······················································································ Air-cooled 2-stroke gasoline Model ························································ ...

  • RedMax CHTZ2500 - page 6

    ❲ 6 ❳ (1) Read owner's manual before operating this machine. (2) Wear head, eye and ear protection. If warning label peel off or become soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s). Never modify your machine. We won't wa ...

  • RedMax CHTZ2500 - page 7

    For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake. (a) The port to refuel the "MIX GASOLINE" Position: FUEL TANK CAP (b) The direction to close the choke Position: AIR CLEANER COVER (c) The direction to open the choke Position: AIR CLEAN ...

  • RedMax CHTZ2500 - page 8

    ❲ 8 ❳ 5. For safe operation 1 . Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later whenever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer from whom you purchased th ...

  • RedMax CHTZ2500 - page 9

    b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be difficult to gain a clear view of the working area. c. During rain storms, during lightning storms, at times of strong or gale-force winds, or at any other times when weather conditions might make it unsafe to use the product. ■ WO ...

  • RedMax CHTZ2500 - page 10

    ❲ 10 ❳ ■ BEFORE STARTING THE ENGINE 1. The area within a perimeter of 50 feet (15m) of the person using the product should be considered a hazardous area into which no one should enter. If necessary yellow warning rope, warning signs should be placed around the perimeter of the area. When work is to be performed simultaneously by two or more ...

  • RedMax CHTZ2500 - page 11

    Never place the throttle into the high speed position when starting the engine. 3. After starting the engine, check to make sure that the cutting attachment stops rotating when the throttle is moved fully back to its original position. If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit ...

  • RedMax CHTZ2500 - page 12

    ❲ 12 ❳ • IF SOMEONE COMES 1. Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris. 2. If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around. ■ MAIN ...

  • RedMax CHTZ2500 - page 13

    5. For safe operation ■ HANDLING FUEL 1. The engine of the RedMax product is designed to run on a mixed fuel which contains highly flammable gasoline. Never store cans of fuel or refill the tank of the unit in any place where there is a boiler, stove, wood fire, electrical sparks, welding sparks, or any other source of heat or fire which might ig ...

  • RedMax CHTZ2500 - page 14

    ❲ 14 ❳ • Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel. Make sure to stop the engine and allow it cool before refueling the unit. Select outdoor bare ground for fueling and move at least 3m(10ft) away from the fueling point before starting the engine. • The RedMax engines are lubricated by oil specially ...

  • RedMax CHTZ2500 - page 15

    container to avoid mixing up with gasoline or other containers. 6. Indicate the contents on outside of container for easy identification. ■ FUELING THE UNIT 1. Untwist and remove the fuel cap. Rest the cap on a dustless place. 2 . Put fuel into the fuel tank to 80% of the full capacity. 3. Fasten the fuel cap securely and wipe up any fuel spillag ...

  • RedMax CHTZ2500 - page 16

    ❲ 16 ❳ ■ STARTING ENGINE The cutting head will start rotating upon the engine starts. 1 . Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine. 2 . Push the primer pump several times until overflown fuel flows out in the clear tube. (OP ...

  • RedMax CHTZ2500 - page 17

    7. Operation 1 . When restarting the engine immediately after stopping it, leave the choke open. 2. Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it. ■ STOPPING ENGINE (OP3) 1. Release the thrott ...

  • RedMax CHTZ2500 - page 18

    • Weather conditions and altitude may effect carburation. • Do not allow anyone to stay close to the hedge-trimmer while working or while adjusting the carburetor. ■ HOW TO USE HANDLE (CHTZ2500 only) To reduce fatigue when trimming hadges, the handle can be swivelled through 90° to the left or right. (OP7, OP8). Do not press the throttle dur ...

  • RedMax CHTZ2500 - page 19

    7. Operation OP9 OP11 OP12 OP10 ❲ 19 ❳ HEDGE TRIMMING TECHNIQUES Trim sides of a hedge first, and then the top. Vertical cut: • With the single-sided blade hedge-trimmer, model HTZ2500 always cut from the bottom up (OP9). With the 2-sided blade model CHTZ2500 use an arcing cut from the bottom upwards, then downwards to use both sides of the b ...

  • RedMax CHTZ2500 - page 20

    ❲ 20 ❳ 8. Maintenance every every every 25 50 100 system/compornent procedure before hours hours hours note use after after after fuel leaks, fuel spillage wipe out ✔ fuel tank, air filter, fuel filter inspect/clean ✔✔ replace, if necessary see ■ ADJUSTING replace carburetor idle adjusting screw ✔ IDLING SPEED (p.17) if necessary clea ...

  • RedMax CHTZ2500 - page 21

    • Make sure that the engine has stopped and is cool before performing any service to the machine. Contact with moving cutting head or hot muffler may result in a personal injury. ■ AIR FILTER • The air filter, if clogged, will reduce the engine performance. Check and clean the filter element in warm, soapy water as required. Dry completely be ...

  • RedMax CHTZ2500 - page 22

    ❲ 22 ❳ ■ MUFFLER • Inspect periodically, the muffler for loose fasteners, any damage or corrosion. If any sign of exhaust leakage is found, stop using the machine and have it repaired immediately. • Note that failing to do so may result in the engine catching on fire. ■ INTAKE AIR COOLING VENT • Never touch the cylinder, muffler, or s ...

  • RedMax CHTZ2500 - page 23

    8. Maintenance ■ BLADES Oil blades each gas tank filling (MA5). • Make sure that the blade bolts are well tightened. • The blade assembly is designed to automatically compensate for any play between the blades. ■ SHARPENING (MA6) Always keep the file or sharpener at an angle of 45° to the blade, and: • Always grind in the direction of th ...

  • RedMax CHTZ2500 - page 24

    10. T roubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank ➞ incorrect fuel ➞ drain it and with correct fuel fuel filter ➞ fuel filter is clogged ➞ clean carburetor adjustment screw ➞ out of normal range ➞ adjust to normal range sparking (no spark) ➞ spark plug is fouled/wet ➞ clean/dry ➞ plug gap i ...

  • RedMax CHTZ2500 - page 25

    1 1. Parts list ❲ 25 ❳ NOTE : 1. Use KOMATSU ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. KOMATSU ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company. 3. When placing parts orders for repair and/or replacement, check if the model ...

  • RedMax CHTZ2500 - page 26

    1 1. Parts list ❲ 26 ❳ Fig.1 CUTTING UNIT HTZ2500 (S/N 100101 and up) ...

  • RedMax CHTZ2500 - page 27

    Key# Description Part Number Q'ty 1 SCREW 3960067 5 2 HANDLE 58040143 1 3 NUT 3980014 4 4 PLATE 58040057 2 5 SWITCH GUARD 2317013 1 6 CLUTCH DRUM 58040218 1 7 DRIVE GEAR 58040217 1 8 GUARD 58040206 1 9 THROTTLE LEVER 58040084 1 10 SPRING 58040136 1 11 SCREW 3960082B 11 12 SCREW 3960073 8 14 REAR HANDLE 58040201 1 15 LEVER 58040085 1 16 SWITCH ...

  • RedMax CHTZ2500 - page 28

    1 1. Parts list ❲ 28 ❳ Fig.2 CUTTING UNIT CHTZ2500 (S/N 100101 and up) ...

  • RedMax CHTZ2500 - page 29

    Key# Description Part Number Q'ty 1 SCREW 3960067 7 2 FRONT HANDLE 58040185A 1 3 NUT 3980014 4 4 PLATE 58040057 2 5 SWITCH GUARD 2317013 1 6 CLUTCH DRUM 58040218 1 7 DRIVE GEAR 58040217 1 8 SPRING 58040080 2 9 THROTTLE LEVER 58040084 1 10 SPRING 58040136 1 11 SCREW 3960057 2 12 SCREW 3960073 7 13 GREASE NIPPLE 58040180 1 14 HANDLE 58040181 1 1 ...

  • RedMax CHTZ2500 - page 30

    Fig.3 ENGINE UNIT (S/N 100101 and up) ❲ 30 ❳ 1 1. Parts list ...

  • RedMax CHTZ2500 - page 31

    ❲ 31 ❳ Key# Description Part Number Q'ty 1 CYLINDER 4810-12111 1 2 GASKET 4810-12210 1 3 BOLT 4820-12130 2 4 INSULATOR 4810-13162 1 5 GASKET, INSU T1512-13120 1 6 GASKET, CARB 4810-13130 1 7 BOLT 4820-13180 2 8 REEDVALVE-A(S) 4810-16100 1 9 • VALVECASE(S) 4810-16110 1 10 • REEDVALVE 4810-16120 1 11 • STOPPER 4810-16130 1 12 • SCREW ...

  • RedMax CHTZ2500 - page 32

    The California Air Resources Board and KOMATSU ZENOAH are pleased to explain the emission control system warranty on your 1995 and later small off-road engine. In California, new small off-road engines must be designed, built and equipped to meet the state’s stringent anti-smog standards. KOMATSU ZENOAH must warrant the emission control system on ...

  • RedMax CHTZ2500 - page 33

     EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY, KOMATSU ZENOAH AMERICA INC. (THE COMPANY), THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP. EMISSION-RELATED PARTS ARE: THE CARBUR ...

  • RedMax CHTZ2500 - page 34

    Pièces en rapport avec les émissions de gaz d'échappement : KOMATSU ZENOAH AMERICA INC., par l'intermédiaire de n'importe quel revendeur RedMax, réparera gratuitement ou remplacera gratuitement pour l'acheteur initial et chaque acheteur successif toute(s) pièce(s) se révélant de constitution et/ou de montage défectueux ...

  • RedMax CHTZ2500 - page 35

    ...

  • RedMax CHTZ2500 - page 36

    KOMATSU ZENOAH AMERICA INC. 4344 Shackleford Road Suite 500 Norcross, Georgia 30093  © Printed in Japan ...

Fabbricante RedMax Categoria Trimmer

I documenti che otteniamo dal fabbricante del dispositivoRedMax CHTZ2500 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici RedMax
- manuali per l’uso CHTZ2500
- schede prodotto RedMax
- opuscoli
- o etichette energetiche RedMax CHTZ2500
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso RedMax CHTZ2500.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione RedMax CHTZ2500, manuali di manutenzione, brevi manuali o manuali utente RedMax CHTZ2500. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto RedMax CHTZ2500.

Manuali per l’uso simili

Manuale completo del dispositivo RedMax CHTZ2500, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare RedMax CHTZ2500 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti RedMax CHTZ2500.

Il manuale per l’uso completo RedMax, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale RedMax CHTZ2500 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice RedMax CHTZ2500, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per RedMax CHTZ2500 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo RedMax CHTZ2500 - che ci dovrebbe aiutare nei primi passi durante l'uso RedMax CHTZ2500
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del RedMax CHTZ2500
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio RedMax CHTZ2500 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su RedMax CHTZ2500?

Utilizza il modulo sottostante

Se non hai risolto il problema con RedMax CHTZ2500 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con RedMax CHTZ2500 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)