Italiano dropdown-ico

Manuale per l’uso AMX NXM Series

54 pagine 0.76 mb
Scarica

Vai alla pagina of 54

Summary
  • AMX NXM Series - page 1

    Operation/Reference Guide Controllers NetLinx ® Cardframe, Control Cards, and NetModules NXC, NXF, and NXM Series Last Revised: 1/8/2009 ...

  • AMX NXM Series - page 2

    AMX Limited Warranty and Disclaimer AMX Corporation warrants its product s to be free of defects in material and workmanship under normal use for three (3) years fr om the date of purchase from AMX Corporat ion, with the following exceptions: • Electroluminescent and LCD Control Panels a re warranted for thr ee (3) ye ars, except for the display ...

  • AMX NXM Series - page 3

    Software License and Warranty Agreement LICENSE GR ANT . AMX grants to Licens ee the non-exc lusive righ t to use the AMX So ftware in the manner de scribed in this Licens e. The AMX Softwar e is licensed, not sold . This lic ense does not grant Licensee the right to creat e derivati ve works of the AMX So ftware. The AM X Soft ware consists of gen ...

  • AMX NXM Series - page 4

    ...

  • AMX NXM Series - page 5

    Table of Contents i Enter the Document Name Here Table of Contents NXF CardFrame and NetModules ......................... ............................................. 1 NXF CardFrame ......................... .................... ........................ .................... ............... 1 NXF Cardframe Specifications ............ ............. ...

  • AMX NXM Series - page 6

    ii Enter the Document Name Here Table of Contents NXC-VAI4 Analog Voltage Control Ca rd ......................... ........................ ......... 29 Specifications ............... .................... .................... ........................ .................... ....... 29 Pinouts and Functions ........................... .................. ...

  • AMX NXM Series - page 7

    NXF CardFrame and NetModules 1 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXF CardFrame and NetModules NetLinx Control Cards can be installed in the NetLinx ® (NXF) CardFrame, th e NI-4000, or in modules for stand-alone operation. The NXF Card Frame accom modates a NetLinx Mast er (or Hub) card, up to twelve NetLinx Control cards, and pr ...

  • AMX NXM Series - page 8

    NXF CardFrame and NetModules 2 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXF Cardframe Specifications Mounting Master/Hub Cards in an NXF CardFrame NetLinx Master and Hub Ca rds can be installed in the NXF CardFr ame. The card mount s in a horizontal position, through the master ca rd slot on the rear panel of the NXF encl osure. T o insta ...

  • AMX NXM Series - page 9

    NXF CardFrame and NetModules 3 NetLinx Cardfram e, Contro l Cards, an d NetModu les Setting the CardFrame 's starting address The 8-position CardFrame Number DIP switch, located on the rear of the CardFrame (FIG. 1 on page 1), sets the starting address (the de vice number in the D:P:S specif ication) for the Control Cards installed in the Card ...

  • AMX NXM Series - page 10

    NXF CardFrame and NetModules 4 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXS-NMS NetModules The NXS-NMS NetModules ( FG2009-10 ) accommodate one Ne tLinx Control Card, and connect to the NetLinx bus via ICSNet connections . The NetModules of fer a simple and economical way to integrate additional functionality to control systems. FIG. 2 sh ...

  • AMX NXM Series - page 11

    NXF CardFrame and NetModules 5 NetLinx Cardfram e, Contro l Cards, an d NetModu les Installing Control Ca rds into an NXF CardFrame 1. Remov e the magnetic front faceplat e/vie wing window from the CardFrame. 2. Align the edge of the Control Card with a slot in the CardFr ame. Slide the card int o the CardFrame and press until you feel the Card sea ...

  • AMX NXM Series - page 12

    NXF CardFrame and NetModules 6 NetLinx Cardframe, Co ntrol Cards, and Net Modules ...

  • AMX NXM Series - page 13

    NXC-COM 2 Dual COM P ort Control Ca rd 7 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-COM2 Dual COM Port Control Card The NXC-COM2 Dual COM Port Control Card ( FG2022 ) provides tw o RS-232, RS-422, or RS-485 control ports and LED feedback for remote sources connected to the NetL inx CardFrame, NI-4000 or NetModule. FIG. 3 sho ws the CO ...

  • AMX NXM Series - page 14

    NXC-COM2 Dual COM Port Control Card 8 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts and Wiring Configuration NXC-COM2 Channel Assignment NXC-COM2 Pinouts NXC-COM2 Wiring Configuration Pin Signal Function RS-232 RS- 422 RS-485 1 GND Signal ground X X 2 RXD1 Receive data X 3 TXD1 T ransmit data X 4 CTS1 Clear to send X 5 RTS1 Request to ...

  • AMX NXM Series - page 15

    NXC-COM 2 Dual COM P ort Control Ca rd 9 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-COM2 Programming Information NXC-COM2 Send_Commands NXC-COM2 Send_Commands Command Description B9MOFF Disable 9-bit in 232/422/ 455 mode. This command works in conjunction with the B9MON command. Syntax: SEND_COMMAND <DEV>,"'B9MOFF&apos ...

  • AMX NXM Series - page 16

    NXC-COM2 Dual COM Port Control Card 10 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-COM2 Send_Commands (Cont.) Command Description GET BAUD Get the RS-232/422/485 port’s current communication par am ete rs . Device sends the response out the Master program p ort. Syntax: SEND_COMMAND <DEV>,"'GET BAUD'" Example: ...

  • AMX NXM Series - page 17

    NXC-COM 2 Dual COM P ort Control Ca rd 11 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-COM2 Send_Commands (Cont.) Command Description SET BAUD Set the RS-232/422/485 port's communication par am ete rs . Syntax: SEND_COMMAND <DEV>,"'SET BAUD <baud>,<parity>,<data>,<stop> [485 <Enable | Disa ...

  • AMX NXM Series - page 18

    NXC-COM2 Dual COM Port Control Card 12 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-COM2 Send_String Escape Sequences NXC-COM2 Send_Commands (Cont.) Command Description XON Enable software handshaking. Syntax: SEND_COMMAND <DEV>,"'XON'" Example: SEND_COMMAND RS232_1,"'XON'" Enables software ha ...

  • AMX NXM Series - page 19

    NXC-COM 2 Dual COM P ort Control Ca rd 13 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-COM2 Send_String Es cape Sequences (Cont.) Command Description 27,20,1 Set the RTS hardware handshake's output to low/inactive (< 3V). Syntax: SEND_STRING <DEV>,"27,20,1" Example: SEND_STRING RS232_1,"27,20,1" Sets th ...

  • AMX NXM Series - page 20

    NXC-COM2 Dual COM Port Control Card 14 NetLinx Cardframe, Co ntrol Cards, and Net Modules ...

  • AMX NXM Series - page 21

    NXC-I/O10 In put/Outp ut Contro l Card 15 NetLinx Cardframe, Control Cards, and NetMod ules NXC-I/O10 Input/Output Control Card The NXC-I/O10 Input/Output Control Card ( FG2021 ) provides 10 Input/Outp ut channels and LED feedback. It acts as a logic-lev el input and responds to switch clos ures o r voltage le vel (high/ lo w) changes. The Switch ( ...

  • AMX NXM Series - page 22

    NXC-I/O10 Input/Output Control Card 16 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts, Signals, and I/O Mode Functions NXC-I/O10 Channel Assignments NXC-I/O10 Pinouts, Signals, and I/O Mode Functions Pin Signal SW mode Functions VO mode functions 1 Common Signal gr ound Common #1 2 I/O #1 Input #1 Input #1 3 Common Signal gr ound Common ...

  • AMX NXM Series - page 23

    NXC-I/O10 In put/Outp ut Contro l Card 17 NetLinx Cardframe, Control Cards, and NetMod ules Setting the Switch/Voltage Mode Jumpers The NXC-I/O10 responds to switch cl osures or voltage-le vel (high/low) changes. Compa tible I/O devices include the Po wer Control Sensor (PCS ), tape transports and limit switches. The input s are set f or SW mode (c ...

  • AMX NXM Series - page 24

    NXC-I/O10 Input/Output Control Card 18 NetLinx Cardframe, Co ntrol Cards, and Net Modules ...

  • AMX NXM Series - page 25

    NXC-IRS4 4-Port IR/S Control Card 19 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-IRS4 4-Port IR/S Control Card The NXC-IRS4 4-Port IR/S Control Card ( FG2023 ) provides four IR/ Serial input c ontrol ports wi th LED status feedback. Each port in the NXC -IRS4 stores programmed comman ds for IR- or serial-controlled dev ices. FIG. 5 sho ...

  • AMX NXM Series - page 26

    NXC-IRS4 4-Port IR/S Control Card 20 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts, Signals, and Functions NXC-IRS4 Channel Assignments The NXC-IRS4 channel settings list ed in the fo llo wing table set the IR output channels. The NXC-IRS4 can process up to two IR or serial de vice channel setting comm ands si multaneously . Programmin ...

  • AMX NXM Series - page 27

    NXC-IRS4 4-Port IR/S Control Card 21 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-IRS4 Send_C ommands (Cont.) Command Description CH Send IR pulses for the selected a channel. All channels below 100 are transmitted as two digits. If the IR code for ENTER (function #21) is loaded, an Enter will follow the number . If the channel is great ...

  • AMX NXM Series - page 28

    NXC-IRS4 4-Port IR/S Control Card 22 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-IRS4 Send_Commands (Cont.) Command Description GET MODE Poll the IR/Serial port's configuration parameters and report the active mode settings to the device requesting the information. The port responds with: <port #> <mode>,<car rier> ...

  • AMX NXM Series - page 29

    NXC-IRS4 4-Port IR/S Control Card 23 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-IRS4 Send_C ommands (Cont.) Command Description PON T urn ON a device connected to an IR port based on the status of the corresponding I/O Link input. If at any time the IR sensor input reads that the device is OFF (such as if one turned it off manually at ...

  • AMX NXM Series - page 30

    NXC-IRS4 4-Port IR/S Control Card 24 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-IRS4 Send_Commands (Cont.) Command Description SET INPUT LINK Sets an IR device to link to an input channel for use with 'PON' and 'POF' commands. The input channel is used for power sensing (via a PCS). Sets an IR device to link to an in ...

  • AMX NXM Series - page 31

    NXC-IRS4 4-Port IR/S Control Card 25 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-IRS4 Send_C ommands (Cont.) Command Description XCHM Changes the IR output pattern for the 'XCH' send command. Syntax: SEND_COMMAND <DEV>,"'XCHM <extended channel mode>'" Va r i a b l e : extended channel mode = 0 ...

  • AMX NXM Series - page 32

    NXC-IRS4 4-Port IR/S Control Card 26 NetLinx Cardframe, Co ntrol Cards, and Net Modules ...

  • AMX NXM Series - page 33

    NXC-REL10 Relay Control Card 27 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-REL10 Relay Control Card The NXC-REL10 Relay Control Card ( FG2020 ) provides ten relays that suppor t devices that emplo y simple momentary or latching contact-cl osure control, with LED feedba ck. FIG. 6 sho ws the REL-10 card: Specifications Pinouts and Functi ...

  • AMX NXM Series - page 34

    NXC-REL10 Relay Control Card 28 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-REL10 Connections/Wiring The NXC-REL10 Control Card has 10 relays that are i ndependently controlled and el ec trically isolated. The relay contacts are rated for a maximum of 1 A @ 0- 24 V A C or 0-28 VDC (resistiv e). Jumpers located on the Card allow you to se ...

  • AMX NXM Series - page 35

    NXC-VAI4 Analog Voltage Control Card 29 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Analog Voltage Control Card The NXC-V AI4 Analog V oltage Control Card ( FG2025 ) provides four independent analog-to-digital inputs and four independent digital-to-ana log outputs, which are controllable over the ICSP netw ork. Each port can be co ...

  • AMX NXM Series - page 36

    NXC-VAI4 Analog Voltage Control Card 30 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts and Functions NXC-VAI4 Specific ations (Cont.) I/O S tatus LEDs 1-8: (two LEDs per channel) LEDs light to indicate ON status. • 4 yellow LED's (one per channel) li ght to indicate input signal changes reported to the Master . • 4 red LED&apos ...

  • AMX NXM Series - page 37

    NXC-VAI4 Analog Voltage Control Card 31 NetLinx Cardfram e, Contro l Cards, an d NetModu les Channel Assignments The channel ON/OFF assignments for the NXC-V AI 4 are described in the follo wing table. Off = 50% v oltage, and all channel as signments are mutually e xclusive . NXC-VAI4 Channel Assignments Channel State Function Channel 1 ON While ch ...

  • AMX NXM Series - page 38

    NXC-VAI4 Analog Voltage Control Card 32 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VAI4 Channel Assignments (Cont.) Channel State Function Channel 17 ON While channel 17 is ON, the voltage on Output 4 is set to 0% OFF Sets Output 4 voltage to 50%. Channel 18 ON While channel 18 is ON, the voltage on Output 1 is set to 75% OFF Sets Outpu ...

  • AMX NXM Series - page 39

    NXC-VAI4 Analog Voltage Control Card 33 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Output Level Assignments NXC-VAI4 Output Level Assignments Lev e l Descriptio n 1 8 bit field; sets voltage on Output 1 to the value commanded. The range is 0-255. Conflicts with channels 1, 5, 10, 14, 18, 22. 2 8 bit field; sets voltage on Output ...

  • AMX NXM Series - page 40

    NXC-VAI4 Analog Voltage Control Card 34 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VAI4 Input Level Assignments Programming Information These NetLinx Send_Commands control the NXC-V AI4: NXC-VAI4 Input Level Assignments Lev el Description 1 8 bit field, returns the current output voltage code for Output 1 (rang e= 0 to 255). 2 8 bit fie ...

  • AMX NXM Series - page 41

    NXC-VAI4 Analog Voltage Control Card 35 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Send_Com mands (Cont.) Command Description GAS Sets the slowdown distance and slowdown speed. When these variables have been set, and a GL command is in progress, t he speed output on Output <x> will be reduced to that specified when the posi ...

  • AMX NXM Series - page 42

    NXC-VAI4 Analog Voltage Control Card 36 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VAI4 Send_Com mands (Cont.) Command Description GS Sets the speed variable to be used for future positional (GL) commands. The change of speed takes place imm ediately even if a positional change operation is currently in p rogress. The voltage output for ...

  • AMX NXM Series - page 43

    NXC-VAI4 Analog Voltage Control Card 37 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Send_Com mands (Cont.) Command Description PE Selects which voltage reference (if any) is to be used for scaling of the output voltage. The specified output will then remain proportional to the specified input. Syntax: SEND_COMMAND <DEV>,&apo ...

  • AMX NXM Series - page 44

    NXC-VAI4 Analog Voltage Control Card 38 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VAI4 Send_Com mands (Cont.) Command Description PN Sets the value of either the minimum output voltage allowed for an output, or the minimum position voltage expected for an input.· V oltage settings are rounded to the near est D/A or A/D code. V oltage ...

  • AMX NXM Series - page 45

    NXC-VAI4 Analog Voltage Control Card 39 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VAI4 Send_Com mands (Cont.) Command Description PX Sets the value of "I/O <x> MAXIMUM" which is either the maximum output voltage allowed for an Output, or the maximum position voltage expected for an Input. V oltage settings are rounded ...

  • AMX NXM Series - page 46

    NXC-VAI4 Analog Voltage Control Card 40 NetLinx Cardframe, Co ntrol Cards, and Net Modules ...

  • AMX NXM Series - page 47

    NXC-VOL4 Volume Control Card 41 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VOL4 Volume Control Card The NXC-VOL4 V olu me Control Card ( FG2024 ) provides four discrete v olu me control channels with LED feedback. The v olume control channe ls can be programmed for mono or stereo operation, and balanced or unbalanced audio connect ion ...

  • AMX NXM Series - page 48

    NXC-VOL4 Volume Control Card 42 NetLinx Cardframe, Co ntrol Cards, and Net Modules Pinouts, Signals, and Functions NXC-VOL4 Specifications (Cont.) Gain jumpers 1-4 • Unity Maximum Input Level: +10dBm • Pro level to Consumer level conversion (attenuation of +4dBu IN to -10dBu OUT) Maximum Input Level: +10dBm • Consumer level to Pro level conve ...

  • AMX NXM Series - page 49

    NXC-VOL4 Volume Control Card 43 NetLinx Cardfram e, Contro l Cards, an d NetModu les NXC-VOL4 Connections/Wiring The NXC-V OL4 card contains four a udio v olume control channels. E ach line-le vel channel is isolated from system ground and can be configured for balanced or unbalanced line operatio n. It supports programmable audio le vels, audio mu ...

  • AMX NXM Series - page 50

    NXC-VOL4 Volume Control Card 44 NetLinx Cardframe, Co ntrol Cards, and Net Modules NXC-VOL4 Levels V olume (audio) channels 1 and 2 use le vels 1 and 2 respecti vely . For reading curre nt volume lev els and displaying bargraphs see CREA TE_LEVEL and SEND_LEVEL . The tw o lev els associated with each port of the NXC-V OL4 Control Card are listed in ...

  • AMX NXM Series - page 51

    NXC-VOL4 Volume Control Card 45 NetLinx Cardfram e, Contro l Cards, an d NetModu les Programming Information These NetLinx Send_Commands control the NXC-V OL4. NXC-VOL4 Send_Commands Command Description PL Ramps specified (audio) channel(s) from current level to a specified preset level or percentage at the current rate or optionally in a specified ...

  • AMX NXM Series - page 52

    NXC-VOL4 Volume Control Card 46 NetLinx Cardframe, Co ntrol Cards, and Net Modules ...

  • AMX NXM Series - page 53

    NXC-VOL4 Volume Control Card 47 Enter the Document Name Here ...

  • AMX NXM Series - page 54

    1/09 © 2009 AMX. All rights reserved. AMX and the AM X logo are register ed trademarks of AMX. AMX reserves the ri ght to alter specifica tions without notice at any time. It’s Your World - Take Con trol™ 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 USA • 800.222.0193 • 469.624.8000 • 469-624-7153 fax • 800.932.6993 technical support • ...

Fabbricante AMX Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoAMX NXM Series possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici AMX
- manuali per l’uso NXM Series
- schede prodotto AMX
- opuscoli
- o etichette energetiche AMX NXM Series
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso AMX NXM Series.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione AMX NXM Series, manuali di manutenzione, brevi manuali o manuali utente AMX NXM Series. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto AMX NXM Series.

Manuali per l’uso simili

Manuale completo del dispositivo AMX NXM Series, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare AMX NXM Series dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti AMX NXM Series.

Il manuale per l’uso completo AMX, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale AMX NXM Series - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice AMX NXM Series, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per AMX NXM Series che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo AMX NXM Series - che ci dovrebbe aiutare nei primi passi durante l'uso AMX NXM Series
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del AMX NXM Series
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio AMX NXM Series in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su AMX NXM Series?

Utilizza il modulo sottostante

Se non hai risolto il problema con AMX NXM Series con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con AMX NXM Series è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)