Italiano dropdown-ico

Manuale per l’uso PhatNoise KDC-MP8029

50 pagine 1.79 mb
Scarica

Vai alla pagina of 50

Summary
  • PhatNoise KDC-MP8029 - page 1

    CD-RECEIVER KDC-X8529 KDC-MP8029 INSTR UCTION MANU AL © B64-2964-00/01 (MW) B64-2964-00_M_r4.1_English.Indd i B64-2964-00_M_r4.1_English.Indd i 04.12.15 1:14:45 PM 04.12.15 1:14:45 PM ...

  • PhatNoise KDC-MP8029 - page 2

    2 | English Con tents Safety precautions 4 Notes 5 About CDs 6 About AA C, MP3 and WMA 7 Notes on Multi-function Key Sy stem 8 General featur es 9 Pow er Selecting the Source Volume Attenuator Audio Control Audio Setup Equalizer Control Speaker Setting Subwoofer Output Display Mode Switching Graphic part/ Spec trum Analyzer Display Switching Wallpa ...

  • PhatNoise KDC-MP8029 - page 3

    English | 3 Basic Operations of r emote 38 Acc essories/ Installation Pr ocedure 40 Connecting W ires to T erminals 41 Installation 42 Removing the Unit 44 T roubleshooting Guide 45 Specifications 49 B64-2964-00_M_r4_English.Indd 3 B64-2964-00_M_r4_English.Indd 3 04.11.11 11:34:23 AM 04.11.11 11:34:23 AM ...

  • PhatNoise KDC-MP8029 - page 4

    4 | English Safety precautions About CD play ers/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or ...

  • PhatNoise KDC-MP8029 - page 5

    English | 5 Notes • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. • P ress the reset button if the disc auto changer fails to operate correctly . Normal operation should be re ...

  • PhatNoise KDC-MP8029 - page 6

    6 | English Handling CDs • Don ’t touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD . Also, don ’t use a CD with tape stuck on it. When using a new CD If the CD center hole o ...

  • PhatNoise KDC-MP8029 - page 7

    English | 7 About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is out of the specification, may not able to be played normally , or the file and folder names may not be display ed correctly. • Attach the correct extension for the Audio file ...

  • PhatNoise KDC-MP8029 - page 8

    8 | English Notes on Multi-function Key S ystem Multi-function Key System ser ves to control various functions with the [1] — [6] buttons. The basic operation of the Multi-function Key System is described below . What’ s the Multi-func tion Ke y System? This unit is equipped with the Multi-function Key System that enables the operation of multi ...

  • PhatNoise KDC-MP8029 - page 9

    English | 9 General fea tures Powe r T urning ON the P ower Press the [SRC] button. • When the power is ON, the <Security Code> (page 30) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. Selecting the S ource Press the [SRC] button. Source required Display ...

  • PhatNoise KDC-MP8029 - page 10

    10 | English General fea tures Audio C ontrol 1 Select the source for adjustment Press the [SRC] button. 2 Enter A udio Control mode Press the [VOL] knob. 3 Select the Basic Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below . 4 Adjust the Basic A udio item T urn the [ ...

  • PhatNoise KDC-MP8029 - page 11

    English | 11 Adjustment Item Display Range Fr ont High Pass F ilter* 2 "HPF-F Fc" Through/40/60/80/100/120/ 150/180/220 Hz Rear High P ass Filter* 2 "HPF-R Fc" Thr ough/40/60/80/100/120/ 150/180/220 Hz Low P ass Filter* 1,2 "LPF-SW" 50/60/80/100/120/ Thr ough Hz Subwoofer Phase* 1,2 "SW Phase" Reverse (180°) ...

  • PhatNoise KDC-MP8029 - page 12

    12 | English General fea tures Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ST ANDBY " display . 2 Enter Speaker Setting mode Press the [VOL] knob. "SP SEL " is displayed. 3 Select the Speaker type T urn the [ VOL] knob. Each ...

  • PhatNoise KDC-MP8029 - page 13

    English | 13 • * F unction of the KDC-X8529 5 Exit display c ontrol mode Press the [6] ("RTN") button. • Under the display type other than "Display Type D" , the function item is not displayed. When the display type other than "Display Type D" is selected, press [1] to [6] buttons or [NEXT ] button. The function it ...

  • PhatNoise KDC-MP8029 - page 14

    14 | English General fea tures Display T ype A/ Display T ype B W allpaper selecting Select a wallpaper to display when Display T ype is set to "Display T ype A "/ "Display T ype B" . 1 S elect the wallpaper display Refer to <Graphic part/ Spectrum Analyzer Display Switching> (page 13). 2 S elect the wallpaper Display the ...

  • PhatNoise KDC-MP8029 - page 15

    English | 15 In Standby Information Display Standby "ST ANDBY" Clock "Clock" Date "Date" • Auxiliary input name is displayed for the Auxiliary input source. • * If the contents of the information cannot be displayed, Pla y time or Frequency is displayed. • When LX-AMP is connected , the item setup by the Display ...

  • PhatNoise KDC-MP8029 - page 16

    16 | English General fea tures The text display in the Upper te xt display part In T uner source Information Display Station name "BAND+ch+SNPS" Fr equenc y "BAND+ch+FREQ" Spectrum Analyzer & Clock "Speana/Clock" Date "Date" In CD & External disc source Information Display Disc title "Disc Title& ...

  • PhatNoise KDC-MP8029 - page 17

    English | 17 Standby sourc e Information Display Clock "Clock" Date "Date" Blank "Blank" In Auxiliary input Information Display Spectrum Analyzer & Clock "Speana/C lock" Date "Date" Blank "Blank" • * If the contents of the information cannot be displayed, Kenwood L ogo displayed. The ...

  • PhatNoise KDC-MP8029 - page 18

    18 | English General fea tures Display T ype C/ Display T ype D Fon t Color Select Selecting the display font color . 1 S elect the key function section Press the [NEXT] button. Repeatedly press the button until "DISP" is displayed above the [2] button. Refer to <Notes on Multi-function Key System> (page 9). 2 Enter display control ...

  • PhatNoise KDC-MP8029 - page 19

    English | 19 • G-Graphic display Displays the condition of G on horizontal direction (e.g; when turning the curve) by the graphic. • G-Meter display (Graphic) Displays the maximum value of acceleration G, right direction G, and left direction G by the numerical value. • G-Meter display ( T ext) The maximum value of acceleration G, right direc ...

  • PhatNoise KDC-MP8029 - page 20

    20 | English General fea tures Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD . 1 Receive/play the station/disc you w ant to attach a title to • A title can ’t be attached to MD or Audio file media. 2 Enter Menu mode Press the [MENU] button f or at least 1 second. "Menu" is displayed. 3 S elect Name set mode Push ...

  • PhatNoise KDC-MP8029 - page 21

    English | 21 Reattaching the F aceplate 1 Align the shaf t on the unit with the depression on the faceplate . 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. B64-2964-00_M_r4_English.Indd 21 B64-2964-00_M_r4_English.Indd 21 04.11.11 11:34:35 AM 04.11.11 11:34:35 AM ...

  • PhatNoise KDC-MP8029 - page 22

    22 | English T uner/T V control f eatures T uning Selecting the station. 1 S elect tuner source Press the [SRC] button. Select the " TUNER" display . 2 S elect the band Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, F M2, and FM3 bands. 3 Tune up or do wn band Push the Contr ol k ...

  • PhatNoise KDC-MP8029 - page 23

    English | 23 3 Enter the frequenc y Press the number buttons on the r emote. Example: Desired frequency Press butt on 92.1 MHz (FM) [0], [9], [2], [1] 810 kHz (A M) [0], [8], [1], [0] Canceling Dir ec t Ac cess T uning Press the [DIRECT ] button on the remote . Station Pr eset Memor y Putting the station in the memory. 1 S elect the band Push the C ...

  • PhatNoise KDC-MP8029 - page 24

    24 | English T uner/T V control f eatures F unction of LX BUS T elevision TV T uning The T V channel of a connected LX BUS T elevision (optional accessory) can be selected. The action depends on the setting of the connected LX BUS T elevision. Refer to the user instruction of the LX BUS T elevision for details. 1 Select T V sourc e Press the [SRC] ...

  • PhatNoise KDC-MP8029 - page 25

    English | 25 CD/Audio file/External disc contr ol features Playing CD & A udio file When there is no disc inserted 1 Open the panel. Press the [ 0 ] button. 2 Inser t a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else. If this happens, pay attention to saf ety and move the shift lever or ...

  • PhatNoise KDC-MP8029 - page 26

    26 | English CD/Audio file/External disc contr ol features Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD Changer" CD changer "MD Changer" MD changer Pause and ...

  • PhatNoise KDC-MP8029 - page 27

    English | 27 T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or Audio file folder f older you’ re listening t o. 1 S elect the key function section Press the [NEXT] button. Repeatedly press the button until "REP" is displayed above the [4] button. Refer to <Notes on Multi-function Key System> (page 8). ...

  • PhatNoise KDC-MP8029 - page 28

    28 | English CD/Audio file/External disc contr ol features F unction of the KDC-X8529 F unction of Audio file Disc Random Play Playing randomly from all of the Audio files recorded in the disc . 1 S elect the key function section Press the [NEXT] button. Repeatedly press the button until "RDM" is displayed above the [3] button. Refer to & ...

  • PhatNoise KDC-MP8029 - page 29

    English | 29 1 Select the key function sec tion Press the [NEXT] button. Repeatedly press the button until "S.MODE" is displayed above the [1] button. Refer to <Notes on Multi-function Key System> (page 8). 2 S elect the Play mode Press the [1] ("S.MODE") button. Each time the button is pressed, the P lay mode switches as ...

  • PhatNoise KDC-MP8029 - page 30

    30 | English Menu system Menu Sy stem Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second. "Menu" is displayed. 2 S elect ...

  • PhatNoise KDC-MP8029 - page 31

    English | 31 • When the Security Code function is activated, it can’t be released. Note, your Security Code is the 4 digit number enter ed in your "Car Audio P asspor t" in this package. 1 Enter Standby Press the [SRC] button. Select the "ST ANDBY " display . 2 Enter Menu mode Press the [MENU] button f or at least 1 second. ...

  • PhatNoise KDC-MP8029 - page 32

    32 | English Menu system In Standby mode Date Adjustmen t 1 S elect Date Adjust mode Push the knob to [FM] or [ AM]. Select the "Date Adjust" display . 2 Enter Date Adjust mode Press the C ontrol knob for at least 1 second. The date display blinks. 3 S electing the item (day , month, or year) to adjust Push the Contr ol knob to [ 4 ] or [ ...

  • PhatNoise KDC-MP8029 - page 33

    English | 33 F unction of the KDC-X8529 In Standby mode G-Counter L evel set Calibrating G-Counter . S etting the level accor ding to the kinds of vehicles. Display Setting "G-Coun ter: Level1" C ounter is easy to go up . "G-Coun ter: Level2" … "G-Coun ter: Level3" C ounter is hard t o go up. • In the case of less ...

  • PhatNoise KDC-MP8029 - page 34

    34 | English Menu system F unction of the KDC-X8529 G-Analyzer S top W atch The control of stop wat ch can be star ted by G- Analyzer function. • Do not use G-Analyzer stop watch on the Public r oads. 1 S elect G-Analyzer Stop Wa tch mode Push the Contr ol knob to [FM] or [AM]. Select the "Stop W atch" display . 2 Enter G-Analyzer Stop ...

  • PhatNoise KDC-MP8029 - page 35

    English | 35 When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 S elect AMP Control mode Push the Contr ol knob to [FM] or [AM]. Select the " AMP Contr ol" display. 2 Enter AMP Control mode Press the C ontrol knob for at least 1 second. 3 S elect the AMP Control item for adjustmen t Push the Cont ...

  • PhatNoise KDC-MP8029 - page 36

    36 | English Menu system T ext Scroll Setting the displayed text scroll. Display Setting "Scroll : Aut o" Scrolls when the display changes . "Scroll : Manual" Doesn’t scr oll. • The text scrolled is shown below . - CD tex t - F older name/ File name/ Song title/ Artist name/ Album name - MD title In Standby mode Built-in Aux ...

  • PhatNoise KDC-MP8029 - page 37

    English | 37 2 Enter Menu mode Press the [MENU] button f or at least 1 second. "Menu" is displayed. 3 S elect Audio Preset mode Push the Contr ol knob to [FM] or [AM]. Select the " Audio P reset" display . 4 Enter Audio Preset mode Press the C ontrol knob for at least 1 second. 5 S elect the Audio Preset Memory Push the Cont ol ...

  • PhatNoise KDC-MP8029 - page 38

    38 | English Basic Operations of r emote Loading and Replacing the battery Use two " AA "-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case. 2 W ARNING • Store unused batteries out of the rea ...

  • PhatNoise KDC-MP8029 - page 39

    English | 39 • Refer to <Audio C ontrol> (page 10) for the operation method, such as the procedures of A udio control and others. • Only selecting and adjusting of the Basic Audio item can be done by the remote control . Selecting and adjusting of the Detail Audio item cannot be done. Dual Zone Sy stem [2-ZONE] button Each time the button ...

  • PhatNoise KDC-MP8029 - page 40

    40 | English Ac cessories/ Installation Pr ocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a shor t circuit, remov e the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wire ...

  • PhatNoise KDC-MP8029 - page 41

    English | 41 Connecting W ires to T erminals ANT. CONT MUTE P.CONT FRONT • L FRONT • R REAR • L REAR • R – + FRONT AUX IN FM/AM antenna input KENWOOD disc changer control input Wiring harness (Accessory 1 ) Ignition wire (Red) Battery wire ( Y ellow) Ground wire (Black) · ( T o car chassis) Ignition key switch Car fuse box (Main fuse) AC ...

  • PhatNoise KDC-MP8029 - page 42

    42 | English Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Refer to the section <Removing the hard rubber frame> (page 44) and then remove the hard rubber frame. 2 Align the holes in the unit (two locatio ...

  • PhatNoise KDC-MP8029 - page 43

    English | 43 Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off , screw in the provided screw s in the holes shown below . Accessory 5 Bottom panel • Never insert the screw in any other screw hole than the one specified. If you screw them in another hole, it will contact and may ...

  • PhatNoise KDC-MP8029 - page 44

    44 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed, r emove the lower two locations. • The frame can be removed from the bottom side in the same manner ...

  • PhatNoise KDC-MP8029 - page 45

    English | 45 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn. ☞ After checking for shor t circuits in the wires , repla ...

  • PhatNoise KDC-MP8029 - page 46

    T uner source ? Radio reception is poor . ✔ The car ant enna is not extended. ☞ Pull the antenna out all the way . ✔ The ant enna control wire is not connected. ☞ Connect the wire correctly, r eferring to the section on <Connecting Wir es to T erminals>. ? The desired frequency can ’t be entered with the Direct Access Tuning . ✔ A ...

  • PhatNoise KDC-MP8029 - page 47

    Audio file sourc e ? Cannot play an A udio file. ✔ The media is scrat ched or dir ty. ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 6). ? The sound skips when an Audio file is being played . ✔ The media is scrat ched or dir ty. ☞ Clean the media, referring to the CD cleaning of the section on < ...

  • PhatNoise KDC-MP8029 - page 48

    Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ Cool down the unit by opening the windows or turning on the air conditioner . As the temperature falls below 60°C (140°F), the disc will start playing again. No Name: Attempted to disp ...

  • PhatNoise KDC-MP8029 - page 49

    FM tuner section Fr equency range (50 kHz space) : 87.5 MH z – 108.0 MHz (200 kHz space) : 87.9 MH z – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3 dBf (0.8 µV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2 dBf(1.6 µV /75 Ω) Fr equency response (±3.0 dB) : 30 Hz – 15 kH z Signal to Noise ratio (MONO) : 70 dB Selectivity (DIN) (±40 ...

  • PhatNoise KDC-MP8029 - page 50

    B64-2964-00_M_r4_English.Indd 50 B64-2964-00_M_r4_English.Indd 50 04.11.11 11:34:50 AM 04.11.11 11:34:50 AM ...

Fabbricante PhatNoise Categoria Car Stereo System

I documenti che otteniamo dal fabbricante del dispositivoPhatNoise KDC-MP8029 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici PhatNoise
- manuali per l’uso KDC-MP8029
- schede prodotto PhatNoise
- opuscoli
- o etichette energetiche PhatNoise KDC-MP8029
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso PhatNoise KDC-MP8029.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione PhatNoise KDC-MP8029, manuali di manutenzione, brevi manuali o manuali utente PhatNoise KDC-MP8029. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto PhatNoise KDC-MP8029.

Manuali per l’uso simili

Manuale completo del dispositivo PhatNoise KDC-MP8029, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare PhatNoise KDC-MP8029 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti PhatNoise KDC-MP8029.

Il manuale per l’uso completo PhatNoise, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale PhatNoise KDC-MP8029 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice PhatNoise KDC-MP8029, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per PhatNoise KDC-MP8029 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo PhatNoise KDC-MP8029 - che ci dovrebbe aiutare nei primi passi durante l'uso PhatNoise KDC-MP8029
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del PhatNoise KDC-MP8029
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio PhatNoise KDC-MP8029 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su PhatNoise KDC-MP8029?

Utilizza il modulo sottostante

Se non hai risolto il problema con PhatNoise KDC-MP8029 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con PhatNoise KDC-MP8029 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)