Italiano dropdown-ico

Manuale per l’uso Speco Technologies VL647iLT

36 pagine 8.66 mb
Scarica

Vai alla pagina of 36

Summary
  • Speco Technologies VL647iLT - page 1

    INSTR UCTION MANU AL Intense Light Color Dome Camera Speco T echnologies is constantly de veloping pr oduct impr o vements. W e r eserve the right to modify pr oduct design and specifications without notice and without incurring any obligation. Re v. 6/9/10 VL647iL T ...

  • Speco Technologies VL647iLT - page 2

    - 2 - CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PA RT S INSIDE . REFER SER VICING T O QUALIFIED SER VICE PERSONNEL. ISO14001 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO ...

  • Speco Technologies VL647iLT - page 3

    - 3 - 31 T rouble Shooting Menu Set Up 9 ▶ Adjust ▶ Reset ▶ Exit 29 30 30 ▶ Menu Set Up ▶ Lens Set Up ▶ Exposure ▶ Back Light ▶ S-WDR ▶ White Bal. ▶ Day & Night ▶ S-DNR ▶ Special 11 12 13 15 18 19 20 21 22 ◈ Camera T itle ◈ D - Effect ◈ Motion ◈ Priv acy ◈ Return 23 25 27 28 29 Contents Contents 3 4 Precautions ...

  • Speco Technologies VL647iLT - page 4

    - 4 - Pr ecautions Do not install the camer a in extr eme temperatur e conditions. Do not touch the fr ont lens of the camer a. Never k eep the camera pointed dir ectly at str ong light. Do not expose the camer a to r adioactivity. Do not install the camer a under unstable lighting conditions. Do not dr op the camer a or subject it to physical shoc ...

  • Speco Technologies VL647iLT - page 5

    - 5 - S ef et y Instructions Pr ecautions f or use Please handle this camer a car efully : ◑ This camera should be installed by qualied personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ ...

  • Speco Technologies VL647iLT - page 6

    VL647iLT 580TV Lines DC Auto Iris V arifocal Lens(2.8mm-12mm) ■ SPECIFICATIONS Intense Light Color Dome Camer a DC Auto Iris V arifocal Lens(2.8mm-12mm) 1/3” Sony Super HAD ll CCD NTSC=811(H) * 508(V) / P AL=795(H) * 595(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) 2:1 Interlace Internal Available SLC / HLC / Off Selectable 580TV Lines 52dB ( ...

  • Speco Technologies VL647iLT - page 7

    - 7 - FE A TURES HIGHT RESOL UTION Horizontal resolution of 580 TV lines is achieved by using a SONY Super- HAD CCD with 410,000 pixels, and a custom DSP yielding images with a high S/N ratio. Day / Night The camera can be congured to either display color images in all lighting conditions or be set automatically switch to B/W in low light condit ...

  • Speco Technologies VL647iLT - page 8

    - 8 - FE A TURES FREE ZE This function freezes the current scene for detailed viewing. PRIV A C Y It also has the ability to mask up to 8 areas of the picture where viewing is not desired. Each zone can be independently programmed via the OSD. OSD All camera functions are menu driven for easy use. MIRR OR Picture can be reversed vertically or horiz ...

  • Speco Technologies VL647iLT - page 9

    - 9 - SET UP MENU DEF A UL T SET MENU LENS EXPOSURE WHITE BAL. D A Y / NIGHT . S-DNR SPECIAL ADJUST RESET EXIT DC SHUTTER AGC: --- INTENSE-L T SLC S-WDR RETURN SHARPNESS BL UE RED RETURN AT W COLOR ON R efer to the ne xt pa ge F ACT OR Y DC : LEVEL (0 ~100 Adjustable) ON (RANGE : 0 ~100 Le v el Selectable) / OFF Sav e the SETUP Menu and exit RETURN ...

  • Speco Technologies VL647iLT - page 10

    - 10 - SPECIAL MENU DEF A UL T SET MENU CAMERA TITLE ON D - EFFECT ON MO TION OFF PRIV ACY OFF RETUEN ON / OFF END FREEZE / MIRR OR/ D-ZOOM/ GAMMA/ NEG. IMA GE /RETURN AREA SELECT : AREA 1~AREA 4 AREA DISPLA Y : ON / OFF LEFT / RIGHT : 0 ~ 100 Le v el Adjustable WIDTH : 0 ~ 100 Le v el Adjustable T OP / BO TT OM : 0 ~ 100 Lev el Adjustable HEIGHT : ...

  • Speco Technologies VL647iLT - page 11

    - 1 1 - Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * T he Set Up menu will be displayed on the monitor . 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. SETUP SETUP LENS EXP ...

  • Speco Technologies VL647iLT - page 12

    - 12 - 3. Changing menu settings using the Left or Right button. * Available v alues or Status are displayed by pressing the Left or Right buttons . Press the button until desired v alue / status is displayed. 4. After completing the setting move the arrow indicator to EXIT and press the SET button to EXIT . 1. Move the arrow indicator to LENS usin ...

  • Speco Technologies VL647iLT - page 13

    - 13 - 3. Press the RETURN to return to the SETUP menu. NO TE * When DC is selected, the brightness can be adjusted. T he brightness control range is 1 ~ 100. Lens BRIGHTNESS RETURN 100 T his function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select t ...

  • Speco Technologies VL647iLT - page 14

    - 14 - EXPOSURE INTENSE-L T SHUTTER BRIGHTNESS INTENSE-L T SLC S-WDR RETURN INTENSE-L T RETURN FLK - - - - HIGH AUTO SLC OFF x 2 NO TE * T o produce better results with FLK, do not use it in conjunction with the S-WDR mode in the BA CKLIGHT menu. * Desired shutter speed can be selected by user 1/60, 1/250, 1/500, 1/2000, 1/5000, 1/0000, 1/100000, F ...

  • Speco Technologies VL647iLT - page 15

    - 15 - * OFF : SLC function does not operate . * SLC : Users can select and define a specific area in a scene , and view the area clearly . * HLC : When there are simultaneous brightness & dark image areas HLC mak es both distinct. * RETURN: Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu. NO TE * Pressing the ...

  • Speco Technologies VL647iLT - page 16

    - 16 - 3. Select a mode using the Left and Right buttons then press the SET button. Select SLC to adjust the desired SLC area and GAIN level. ① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right button from 0 ~ 7 cells . ② Move the arrow indicator to select the HEIGHT of cells to increase or ...

  • Speco Technologies VL647iLT - page 17

    - 17 - 4. Select HLC by using the Left and Right buttons then press the Set Up button to set up the desired HLC area and GAIN level. * Move the arrow indicator to RETURN and press the Set Up button after complete the SLC area set to return to EXPOSURE menu. * LEVEL : Adjust the HLC sensitivity by selecting between 0~8. * DEF A UL T : Press the Defa ...

  • Speco Technologies VL647iLT - page 18

    - 18 - S-WDR T his camera provides intelligent light level control to overcome even strong backlight conditions . 1. Move the arrow indicator to S-WDR using the Up or Down button on the EXPOSURE menu screen. 2. Select the desired feature by using the Left or Right button. EXPOSURE SHUTTER BRIGHTNESS AGC INTENSE-L T SLC S-WDR RETURN 1/60 - - - - LOW ...

  • Speco Technologies VL647iLT - page 19

    - 19 - White Balance T he White Balance function is used to control the “on-screen” color . 1. Move the arrow indicator to WHITE B AL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the Left or Right button. * T here ar e thr ee user selectable W hite Balance settings available. SETUP LENS EXPOSURE WHI ...

  • Speco Technologies VL647iLT - page 20

    - 20 - Day / Night Picture can be displayed in either color or black and white . 1. Select D A Y / NIGHT using the Up or Down button on the SETUP menu screen. 2. Select the desired mode using the Left and Right buttons . SETUP LENS EXPOSURE WHITE BAL DA Y / NIGHT S-DNR SPECIAL ADJUST RESET EXIT DC AT W COLOR ON * COLOR : T he picture is always disp ...

  • Speco Technologies VL647iLT - page 21

    - 21 - 3. Select the desired mode and set the v alues by using the Left or Right button . S-DNR is used to reduce the level of background noise in a low luminance environment. * DELA Y : T he range can be adjusted between 0 ~ 63. * S - LEVEL : T he start level can be adjusted between 0 ~ 100. * E - LEVEL : T he end level can be adjusted between 0 ~ ...

  • Speco Technologies VL647iLT - page 22

    - 22 - Special 1. When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons . 2. Select one of the mode using the Up and Down button. 1. CAM TITLE : When input, the Camera ID is displayed on the monitor . 1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen. 1-2) Set to ON using ...

  • Speco Technologies VL647iLT - page 23

    - 23 - 1-3) Press the SETUP button. CAMERA TITLE CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ▷ → ← ↑ ↓ ( ) - ㅡ _ □ / = & : ~ , . ← → CLR POS END 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ▷ → ← ↑ ↓ ( ) - ㅡ _ □ / = & : ~ , . ← → CLR POS END NO TE * When CAMERA TITLE is set to OFF , the CAMERA TITLE is ...

  • Speco Technologies VL647iLT - page 24

    - 24 - NO TE * In cases where the wrong Camera ID has been input........ Move the cursor to CLR and press SETUP button to erase characters from left to right, and repeat the above steps to input the characters again. 1-5) T o select the position where the Camera ID should be displayed on the screen. ① Move the cursor to POS and press the SET butt ...

  • Speco Technologies VL647iLT - page 25

    - 25 - ③ Select a new position by using the four directional button, Press the SET button to confirm the position. CAM1 2 . D - EFFECT Move the cursor to D-EFFECT and press the SET button to set the other image functions . 2 -1) FREEZE : Image freezing or moving Image SPECIAL D-EFFECT 1. CAM TITLE OFF 2. D - EFFECT 3. MOTION OFF 4. PRIV ACY OFF 5 ...

  • Speco Technologies VL647iLT - page 26

    - 26 - 2 -2) MIRROR : Flip the image horizontally on the screen. 2 -3) D - ZOOM: Digital zoom av ailable , range x1 ~ x32. * P AN : The pan range can be controlled between -100 ~ + 100 * TIL T : T he tilt range can be controlled between -100 ~ + 100 * V -FLIP : Flip the image vertically on the screen. * RO T A TE : Flip the horizontal image vertica ...

  • Speco Technologies VL647iLT - page 27

    - 27 - NO TE * P AN and TIL T function should be available when using the digital zoom. 2-4) GAMMA : Desired gamma v alues can be adjusted between 0.05 ~ 1.00. 2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu. 3. MO TION 3-1) When the special menu screen is displayed, use the Up or Down botton to a ...

  • Speco Technologies VL647iLT - page 28

    - 28 - ⑤ Move the arrow indicator to select the SENSITIVITY to increase or decrease by using the Left / Right button between the level 0 ~ 40. ⑥ RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu. 4. PRIV ACY Hide an area you want to hide on the screen. 4-1). When the SPECIAL menu screen is displayed, ...

  • Speco Technologies VL647iLT - page 29

    - 29 - ③ Move the arrow indicator to WIDTH to mak e desired width of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100. ④ Move the arrow indicator to HEIGHT to mak e desired height of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100. ⑤ Move the arrow indicator to t ...

  • Speco Technologies VL647iLT - page 30

    - 30 - 2. Select the desired mode by using Up or Down button.. SHARPNESS : Improving image clarity . T he level can be adjusted to obtain an improved image . However , when the level is set too high it can distort the image or cause noise . * Select BLUE or RED to increase or decrease the v alue of R-Gain(RED) and B-Gain(BLUE) while monitoring the ...

  • Speco Technologies VL647iLT - page 31

    - 31 - Trouble Shooting PR OBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor . ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. ☞ Adjust the monitor controls, as required. ☞ If the camera is facing a very strong ...

  • Speco Technologies VL647iLT - page 32

    - 32 - POLICY, TERMS AND CONDITIONS OF SALE This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any other liability or policy without our written consent. We cannot be held responsible for typographical errors. TERMS OF PAYMENT 2%, 10 days, net 30 from invoice ...

  • Speco Technologies VL647iLT - page 33

    - 33 - ▶ MEMO ...

  • Speco Technologies VL647iLT - page 34

    - 34 - ▶ MEMO ...

  • Speco Technologies VL647iLT - page 35

    - 35 - ▶ MEMO ...

  • Speco Technologies VL647iLT - page 36

    200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com ...

Fabbricante Speco Technologies Categoria Camera Accessories

I documenti che otteniamo dal fabbricante del dispositivoSpeco Technologies VL647iLT possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Speco Technologies
- manuali per l’uso VL647iLT
- schede prodotto Speco Technologies
- opuscoli
- o etichette energetiche Speco Technologies VL647iLT
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Speco Technologies VL647iLT.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Speco Technologies VL647iLT, manuali di manutenzione, brevi manuali o manuali utente Speco Technologies VL647iLT. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Speco Technologies VL647iLT.

Manuali per l’uso simili

Manuale completo del dispositivo Speco Technologies VL647iLT, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Speco Technologies VL647iLT dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Speco Technologies VL647iLT.

Il manuale per l’uso completo Speco Technologies, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Speco Technologies VL647iLT - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Speco Technologies VL647iLT, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Speco Technologies VL647iLT che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Speco Technologies VL647iLT - che ci dovrebbe aiutare nei primi passi durante l'uso Speco Technologies VL647iLT
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Speco Technologies VL647iLT
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Speco Technologies VL647iLT in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Speco Technologies VL647iLT?

Utilizza il modulo sottostante

Se non hai risolto il problema con Speco Technologies VL647iLT con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Speco Technologies VL647iLT è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)