-
Mitsubishi EN-1 - page 1
EN-1 LAN Contr ol Utility User Manual (for HL2750U) Contents Preparation/SetUp ......................................................................... 2 Preparation befor e using the network function ........................................... 2 Connection ........................................................................................... ...
-
Mitsubishi EN-1 - page 2
EN-2 Pr eparation/SetUp Preparation befor e using the network function This projector is equipped with the network function to contr ol and monitor the projector’ s operations using a W eb browser and to send e-mail notifi cation. Before using the network function, perform the following thr ee preparation steps. (1) Setup of the application soft ...
-
Mitsubishi EN-1 - page 3
EN-3 1 Copy three fi les (DI_4.1.3.4.msi, Setup.Exe, and Setup.Ini) contained in the T ools folder of CD-ROM to the hard disk of your personal computer . 2 Double-click the fi le named Setup.Exe. 3 When the following window appears, click Next. Installation Before starting installation, be sur e to read “ReadMe.txt” contained in the CD-ROM. C ...
-
Mitsubishi EN-1 - page 4
EN-4 Preparation/SetUp (continued) 4 Select a folder to install the program, and click Next. 5 Click Next. 6 Installation starts. • The pr ogress of the installation process is displayed as shown on the right. 7 When the installation process is completed, click Close. How to remove Pr ojector -Control Device Installer Select [Start] - [Control Pa ...
-
Mitsubishi EN-1 - page 5
EN-5 1 Start the Projector -Control Device Installer . • Select [Start] - [All Pr ograms] - [Projector] - [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Click the Search button. • Projector is r ecognized. (Note) When projector isn’ t recognized, check the following. • The fi rewall function has been disabled. (Whe ...
-
Mitsubishi EN-1 - page 6
EN-6 5 Select [Obtain an IP address automatically] and click Next. 6 Click Next. • Check that the options are marked with check- marks as shown on the right. Keep them un- changed for normal use. 7 Click Assign. 8 Click Finish. 9 Click the Search button. • Check the IP address. When using a DHCP server Preparation/SetUp (continued) ...
-
Mitsubishi EN-1 - page 7
EN-7 5 Select [Assign a specifi c IP addr ess] and click Next. 6 Enter a fi xed IP addr ess (for example, 192.168.0.1) and click Next. (Note) Do not use 0 or 255 for the last digit of the IP address. 7 Click Assign. 8 Click Finish. 9 Click the Search button. • Check the IP address you set. (Note) When using the error/alert e-mail notifi cation ...
-
Mitsubishi EN-1 - page 8
EN-8 1 Start the Projector -Control Device Installer . • Select [Start] - [All Pr ograms] - [Projector] - [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Press the + buttons on the left pane to expand the tree structur e until the IP address you set appears. 3 Click the T elnet Confi guration tab. 4 Select the Connect tab ...
-
Mitsubishi EN-1 - page 9
EN-9 1 Enter “0” and press the Enter key . 2 Input the old (current) passwor d and press the Enter key . (Default password is admin.) • If you input a wrong passwor d, an error message appears and the setting menu is displayed again. In this case, set the password again. • If you for get your password, select “7 factory defaults,” input ...
-
Mitsubishi EN-1 - page 10
EN-10 1 Enter “3” and press the Enter key . 2 T o enable the e-mail notifi cation function of Projector - View , enter 1 and press the Enter key . (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.) Setting the LAN control (LAN-Contr olled Mode) Preparation/SetUp (continued) 1 Enter “1” and press the Enter key . 2 Enter ? ...
-
Mitsubishi EN-1 - page 11
EN-11 1 Enter “9” and press the Enter key . 2 The setting screen is shaded and the setting is updated. • It takes about 10 seconds for the setting to be updated. Don’t perform communication during this period. Save and exit • Because the password, display language, LAN contr ol, and PJLink ™ certifi cation are set using the telnet func ...
-
Mitsubishi EN-1 - page 12
EN-12 1 Start the Projector -Control Device Installer . • Select [Start] - [All Pr ograms] - [Projector] - [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Expand the tree structur e on the left pane until the IP address you set appears. 3 Select the WEB Confi guration tab. 4 Click the External Browser button or Go button. ...
-
Mitsubishi EN-1 - page 13
EN-13 5 The passwor d input screen appears. Enter the password you set. • The default password is admin. (Note) If you input a wr ong password 4 successive times, the W eb browser is closed. In this case, r epeat from step 1. 6 The ProjectorView main scr een appears. Click any- where on the scr een. • The scr een may not show the latest informa ...
-
Mitsubishi EN-1 - page 14
EN-14 ProjectorView (continued) VIRTUAL REMOTE contr oller Put a checkmark in the box of the Virtual remote enabled on the Pr ojectorView main screen, and click the VIRTUAL REMOTE button. The following Virtual Remote window appears. For the functional descriptions of each button, see the user manual of the projector . E-mail notifi cation function ...
-
Mitsubishi EN-1 - page 15
EN-15 Initial setting T o load information on the pr ojector such as model name and lamp operating time, set the pr ojector data in advance. Click the SETUP button on the ProjectorView main scr een. The Projector Setup screen appears. Enter data according to the description of each setting item. (Note) • Y ou can’t change the Projector model, S ...
-
Mitsubishi EN-1 - page 16
EN-16 Support for the PJLink™ function This projector supports standar d protocol PJLink ™ for projector contr ol and you can control and monitor pr ojector’ s operations using the same application among projectors of dif ferent models and differ ent manufacturers. T o use this function, set the PJLink™ certifi cation properly according to ...
-
Mitsubishi EN-1 - page 17
EN-17 [Notes on Instant Shut Down] Instant shutdown of the projector during contr ol using the network function may cause ProjectorView to fail to display data correctly . • The operating time and temperature may not be displayed corr ectly . In this case, close the browser , recognize this projector using Pr ojector -Control Device Installer , a ...
Hai una domanda su Mitsubishi EN-1?
Utilizza il modulo sottostante
Se non hai risolto il problema con Mitsubishi EN-1 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Mitsubishi EN-1 è probabile che voglia condividere il modo di risolverlo.