Italiano dropdown-ico

Manuale per l’uso Fujitsu MX130 S2

256 pagine 11.51 mb
Scarica

Vai alla pagina of 256

Summary
  • Fujitsu MX130 S2 - page 1

    Upgrad e and Mai ntena nce Manu al - English PRIMERGY MX130 S2 Server Upgr ade and Mai ntena nce Ma nual Edition November 201 1 ...

  • Fujitsu MX130 S2 - page 2

    Comments … Suggestions … Corrections … The User Documentation Department w ould like to know your opinion of this manual. Y our feedback helps us optimize our documentation to suit your individual needs. Feel free to se nd us your co mments by e-mail to manuals@ts.fujitsu.com . Certified documentation according t o DIN EN IS O 9001: 2008 T o ...

  • Fujitsu MX130 S2 - page 3

    MX130 S2 Upgrade and Maintenance Manual 3 Before reading this manua l For your safety This manual cont ains important i nformation for safely and correctly using this product. Carefully read the manual befor e using this product. Pay particular attention to the accompanying m anual "Safety Notes and Regulations" and ensure these safety no ...

  • Fujitsu MX130 S2 - page 4

    4 Upgrade and Maintenance Man ual MX130 S2 These uses include control of nuclear reactions in nuclear power plant s , automatic airplane fl ight control, air traffi c control, traffic c ontrol in mass transport systems, medical devices for life support, and missi le guidance control in weapons systems (hereaf ter , " high safety use "). C ...

  • Fujitsu MX130 S2 - page 5

    MX130 S2 Upgrade and Maintenance Manual 5 Content s V ersion history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1.1 Where to find which info rmation? . . . . . . . . . . . . . . . 18 1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . 19 2 Bef ...

  • Fujitsu MX130 S2 - page 6

    6 Upgrade and Maintenance Man ual MX130 S2 Contents 4.3 Opening the front cage . . . . . . . . . . . . . . . . . . . . . 52 4.4 Closing the front cage . . . . . . . . . . . . . . . . . . . . . . 53 4.5 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 54 4.5.1 Mounting the server cover . . . . . . . . . . . . . . . . . . . . 54 4.5 ...

  • Fujitsu MX130 S2 - page 7

    MX130 S2 Upgrade and Maintenance Manual 7 Contents 7 HDDs and accessible drives . . . . . . . . . . . . . . . . . . 79 7.1 Basic procedure . . . . . . . . . . . . . . . . . . . . . . . . 81 7.2 Mounting order . . . . . . . . . . . . . . . . . . . . . . . . . 82 7.3 Installing 3.5-inch HDD in HDD1 / HDD2 chassis bay . . . . 83 7.3.1 Required tools . ...

  • Fujitsu MX130 S2 - page 8

    8 Upgrade and Maintenance Man ual MX130 S2 Contents 7.9 Inst alling addition al 3.5-inch HDD in 5.25-inch ODD/HDD bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 7.9.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . 103 7.9.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 103 7.9.3 Install i ...

  • Fujitsu MX130 S2 - page 9

    MX130 S2 Upgrade and Maintenance Manual 9 Contents 7.16 Removing slimline ODD out of 5.25-inch ODD/HDD bracket . . . . . . . . . . . . . . . . . . . . . . . 125 7.16.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 125 7.16.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 125 7.16.3 Removing a slimline ODD out ...

  • Fujitsu MX130 S2 - page 10

    10 Upgrade and Maintenanc e Manual MX130 S2 Contents 9 Expansion car ds . . . . . . . . . . . . . . . . . . . . . . . . 159 9.1 Basic procedure . . . . . . . . . . . . . . . . . . . . . . . . 160 9.2 Expansion car ds . . . . . . . . . . . . . . . . . . . . . . . . 161 9.2.1 Installing exp ansion cards . . . . . . . . . . . . . . . . . . . 161 9.2.1 ...

  • Fujitsu MX130 S2 - page 11

    MX130 S2 Upgrade and Maintenance Manual 11 Contents 10.2 Installing memory modules . . . . . . . . . . . . . . . . . . 182 10.2.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . 182 10.2.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . 182 10.2.3 Installing a memory module . . . . . . . . . . . . . . . . . . . ...

  • Fujitsu MX130 S2 - page 12

    12 Upgrade and Maintenanc e Manual MX130 S2 Contents 12.2 T rusted Plat form Module (TPM) . . . . . . . . . . . . . . . . 204 12.2.1 Install ing the TPM board . . . . . . . . . . . . . . . . . . . . 204 12.2.1.1 Required tools . . . . . . . . . . . . . . . . . . . . . . . . 204 12.2.1.2 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . ...

  • Fujitsu MX130 S2 - page 13

    MX130 S2 Upgrade and Maintenance Manual 13 Contents 14.1.1 Overview of used cables . . . . . . . . . . . . . . . . . . . . . 234 14.2 Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 14.2.1 Power cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 235 14.2.2 Data cabling . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Fujitsu MX130 S2 - page 14

    14 Upgrade and Maintenanc e Manual MX130 S2 Contents ...

  • Fujitsu MX130 S2 - page 15

    MX130 S2 Upgrade and Maintenance Manual 15 V ersi on history Issue number Reason for update Initial r elease ...

  • Fujitsu MX130 S2 - page 16

    16 Upgrade and Maintenanc e Manual MX130 S2 V ersion history ...

  • Fujitsu MX130 S2 - page 17

    MX130 S2 Upgrade and Maintenance Manual 17 1 Intro duction This Upgrade and Maintenance Manual prov ides instructions for the following procedures: ● Upgrading the server configuration by adding optional hardware components ● Upgrading the server configurati on by replacing existing hardware components with superior ones. ● Replacing defectiv ...

  • Fujitsu MX130 S2 - page 18

    18 Upgrade and Maintenanc e Manual MX130 S2 Introductio n 1.1 Where to find which information? While the Upgrade and Maintenanc e Manual focuses on upgrade and maintenance procedures to bring the server back to normal operation, additional manuals provide det ailed background information on server components and BIOS settings. For information on do ...

  • Fujitsu MX130 S2 - page 19

    MX130 S2 Upgrade and Maintenance Manual 19 Introductio n 1.2 Notational conventions The following notati onal conventions are used in this manual: T ext in italics indi c ates commands or menu items fixed font indicates system output semi-bold fi xed font indicates text to be entered by the user "Quotation mark s" indicate names of chapte ...

  • Fujitsu MX130 S2 - page 20

    20 Upgrade and Maintenanc e Manual MX130 S2 Introductio n ...

  • Fujitsu MX130 S2 - page 21

    MX130 S2 Upgrade and Maintenance Manual 21 2 Bef ore you start Before you start any upgrade or maintenance t ask, please proceed as follows: Ê Carefully read the safety instructions in c hapter "Important information" on page 31 . Ê Make sure that all necessary m anuals are available. Refer to the documentation ov erview in section &quo ...

  • Fujitsu MX130 S2 - page 22

    22 Upgrade and Maintenanc e Manual MX130 S2 Before you start Please contact your local Fujits u customer service partner for details on how to order expansion kits or spare part s. Us e the Fujitsu Illustrated S pares Catal og to identify the required spare p art and obtain technical data and order information. Illustrated S p ar es catal ogs are a ...

  • Fujitsu MX130 S2 - page 23

    MX130 S2 Upgrade and Maintenance Manual 23 Before you start 2.1 Classification of procedures The complexity of maintenance procedures varies signifi cantly . Procedures have been assigned to one of three unit categories, indicating the lev el of diffi c ulty and required qualific ation. At the beginning of eac h procedure, the i nvolved unit type i ...

  • Fujitsu MX130 S2 - page 24

    24 Upgrade and Maintenanc e Manual MX130 S2 Before you start 2.1.2 Upgrade and Rep air Units (URU) Upgr ade and Re pair U nits are non hot-plug components that can b e ordered separately to be install ed as options ( Upgrade Units ). Upgrade and repair procedures involve shutting down and opening the s erver . V CAUTION! The device may be seriously ...

  • Fujitsu MX130 S2 - page 25

    MX130 S2 Upgrade and Maintenance Manual 25 Before you start 2.1.3 Field R eplaceable Units (FRU) Removing and inst alling Field Replaceable Units involves comp lex maintenance procedures on integral server components. Procedures will require shutting down, opening and disassembling the server . V CAUTION! Maintenance procedures involving Field Repl ...

  • Fujitsu MX130 S2 - page 26

    26 Upgrade and Maintenanc e Manual MX130 S2 Before you start 2.2 A v erag e task du rati on The average task duration inc l uding preliminary and concludi ng s tep s is indicated at the beginning of eac h procedure next to the procedure class. Refer to table 1 on p age 26 for an overview of steps t aken into account for calculating the average t as ...

  • Fujitsu MX130 S2 - page 27

    MX130 S2 Upgrade and Maintenance Manual 27 Before you start 2.3 T ools you need at hand When preparing the maintenanc e task, ensure that all required tools are available according to the overview below . Y ou will find a list of required tools at the beginning of each procedure. Screw driver / Bit insert Screw Usage T ype Phil lips PH2 / (+) No. 2 ...

  • Fujitsu MX130 S2 - page 28

    28 Upgrade and Maintenanc e Manual MX130 S2 Before you start 2.4 Documents you need at hand Maintenance procedures may include references to additional document ation. When preparing the main tenance task, ensure that all required manuals are available according to th e ov erview below . I – Ensure to store all printed manuals enclosed with your ...

  • Fujitsu MX130 S2 - page 29

    MX130 S2 Upgrade and Maintenance Manual 29 Before you start Glossa ry available from the S er verV iew Suite DVD 2 or online at http://manuals.ts.fujit su.com "W arranty " manual " 保証書 " for the Japanese market Important information on warranty regulations, recycli ng and service, available from the ServerView Suite DVD 2, ...

  • Fujitsu MX130 S2 - page 30

    30 Upgrade and Maintenanc e Manual MX130 S2 Before you start ...

  • Fujitsu MX130 S2 - page 31

    MX130 S2 Upgrade and Maintenance Manual 31 3 Import ant informa tion V CAUTION! Before install ing and starting up a devic e, please observ e the safety instructions listed i n the following section. This will help you to avoid making serious errors that could imp air your health, damage the device and endanger the data base. I Keep all manual and ...

  • Fujitsu MX130 S2 - page 32

    32 Upgrade and Maintenanc e Manual MX130 S2 Important information ● If the device is brought in from a c old environment, condensation may form both inside and on the outs i de of the device. W ait until the device has acclimatized to room temp er ature and is absolutely dry before starting i t up. Material damage may be caused to the device if t ...

  • Fujitsu MX130 S2 - page 33

    MX130 S2 Upgrade and Maintenance Manual 33 Important informatio n ● Ethernet cabling has to comply wi th EN 50173 and EN 50174-1/2 st andar ds or ISO/IEC 1 1801 standard respectively . The minimum requirement is a Category 5 shielded cable for 10/100 Ethernet, or a Category 5e cable for Gigabit Ethernet. ● Route the cables in such a way that th ...

  • Fujitsu MX130 S2 - page 34

    34 Upgrade and Maintenanc e Manual MX130 S2 Important information ● Do not damage or modify internal c ables or devices. Doing so may cause a device failure, fire, or electric shock and will v oid the warranty and exempt the manufacturer from all liability . ● Devices inside the server remain hot after shut down. Wait for a while af ter shutdow ...

  • Fujitsu MX130 S2 - page 35

    MX130 S2 Upgrade and Maintenance Manual 35 Important informatio n Batteries ● Incorrect replacement of batteries ma y lead to a risk of explos ion. The batteries may only be replaced with i dentic al batteries or with a type recommended by the manufacturer . ● Do not throw batteries into the trash can. ● Batteries must be disposed of in acc o ...

  • Fujitsu MX130 S2 - page 36

    36 Upgrade and Maintenanc e Manual MX130 S2 Important information ● High humidity and airborne dust levels are to be avoided. El ec tric shocks and/or server failures may be caused by liquids such as water , or metallic items, such as pape r clip s , entering a drive. ● Shocks and vibrations are also to be avoided. ● Do not insert any objects ...

  • Fujitsu MX130 S2 - page 37

    MX130 S2 Upgrade and Maintenance Manual 37 Important informatio n I Y ou can prevent damage from the ODD and the CDs/DVDs/BDs, as well as premature wear of the disks, by observing the following suggestions: – Only insert disks in the drive when needed and remove them af ter use. – S tore the disks in suitable sleeves. – Protect the disks from ...

  • Fujitsu MX130 S2 - page 38

    38 Upgrade and Maintenanc e Manual MX130 S2 Important information ● Any devices or tools that are used must be free of electrostatic charge. ● Wear a suit able grounding cable that connects you to the external chassis of the system unit. ● Always hold component s with ESDs at the edges or at the point s marked green (touch points). ● Do not ...

  • Fujitsu MX130 S2 - page 39

    MX130 S2 Upgrade and Maintenance Manual 39 Important informatio n 3.2 ENERGY ST A R I Energy S tar is applicable onl y for 230 V mains volt age. ENERGY ST AR does not apply to the Japanese market. In typical confi gurations the PRIMERG Y MX130 S2 satisfies the stringent requirements of the Ecolabel Energy St ar for Computers V ersion 5.0. These req ...

  • Fujitsu MX130 S2 - page 40

    40 Upgrade and Maintenanc e Manual MX130 S2 Important information The system has a hibernate mode (S4 mode) from which it can be woken up via WOL (W ake-up On LAN). In order to use this feature, however , the S4 mode must be activated/enabled i n the corr esponding operating system installed. The following des cription is an ex ample and can onl y ...

  • Fujitsu MX130 S2 - page 41

    MX130 S2 Upgrade and Maintenance Manual 41 Important informatio n Exiting the hibernate/ idle state (S4 mode) Y ou switch on the system again ei ther manually using the On/Off button or usi ng the WOL function (WOL= W ake-up On LAN). T o do this, a Magic Packet with the MAC address of the system to be woken up is sent to the internal LAN controller ...

  • Fujitsu MX130 S2 - page 42

    42 Upgrade and Maintenanc e Manual MX130 S2 Important information 3.3 C E conformi ty The system complies with the requirements of the EC directives 2004/108/EC regarding "Electromag netic Compatibi lity" and 2006/95/EC "Low V oltage Directive". This is indi c ated by the CE marking (CE = Communauté Européenne). ...

  • Fujitsu MX130 S2 - page 43

    MX130 S2 Upgrade and Maintenance Manual 43 Important informatio n 3.4 FCC Class A Compliance S t atement If there is an FCC statement on the device, it appli es to the product s covered in this manual, unless otherwise specifi ed herein. The statement for other products will appear in the ac companyi ng documentation. NOTE: This equipment has been ...

  • Fujitsu MX130 S2 - page 44

    44 Upgrade and Maintenanc e Manual MX130 S2 Important information 3.5 Environm ent al protection Environmentally-friendly prod uct design and development This product has been designed in accordance with the Fujit s u standard for "environmental ly friendly product design and dev elopment". This means that key factors such as durability , ...

  • Fujitsu MX130 S2 - page 45

    MX130 S2 Upgrade and Maintenance Manual 45 Important informatio n Labels on plastic casing part s Please avoid sticking your own labels on plastic parts wherever possible, since this makes it dif fi cult to recycle them. Returns, recycling and disposal Please handle returns, recycling and dis pos al in accordance with loc al regulations. Details re ...

  • Fujitsu MX130 S2 - page 46

    46 Upgrade and Maintenanc e Manual MX130 S2 Important information ...

  • Fujitsu MX130 S2 - page 47

    MX130 S2 Upgrade and Maintenance Manual 47 4 Basic h a rdware proce dures 4.1 Using diagnostics information The "PRIMERGY MX130 S2 Server Operating manual" gives an introduction to server features and provides an overview of available hardware options. Use the Fujitsu ServerV iew Suite management sof tware to plan the upgr ade or replacem ...

  • Fujitsu MX130 S2 - page 48

    48 Upgrade and Maintenanc e Manual MX130 S2 Basic hardware procedures 4.2 Ope nin g the ser ver V CAUTION! ● Before removing or installi ng covers, turn off the server and all peripheral devices. Also unplug al l power c ables from the outlet. Failure to do so can cause electric shock. ● In order to comply with applicable E MC r egulations (reg ...

  • Fujitsu MX130 S2 - page 49

    MX130 S2 Upgrade and Maintenance Manual 49 Basic hardware procedures Figure 2: Power button on the front panel Ê Shut down the server . I If the system is running an ACPI-compliant operating system, pressing the On / Off button will perform a graceful shutdown. Disconnecting power cords Figure 3: Removing the power cord from the PSU Ê Disconnect ...

  • Fujitsu MX130 S2 - page 50

    50 Upgrade and Maintenanc e Manual MX130 S2 Basic hardware procedures Only for Jap an: Disconnecting cable tie Figure 4: Removing the cable tie Ê Pull out on the loc k ing lever on the PSU cabl e tie (1) and loosen the loope (2). Ê Disconnect the power cord from the PSU module and remove it from the cable tie. ...

  • Fujitsu MX130 S2 - page 51

    MX130 S2 Upgrade and Maintenance Manual 51 Basic hardware procedures 4.2.2 Removing the s e rver c over Figure 5: Unlocking the locking bar Ê Slide the locking bar to the lef t until it rests in place. Figure 6: Removing the server cover Ê Push the server cover to the front. Ê Remove the server cover . ...

  • Fujitsu MX130 S2 - page 52

    52 Upgrade and Maintenanc e Manual MX130 S2 Basic hardware procedures 4.3 Opening the front cage Figure 7: Opening the front cage Ê Carefully fold open the front cage. I Pay attention to the S A T A data cable, es pecially to the the s limline ODD SA T A data cabl e when you fold open the front cage. If it is located in the additional 5.25-inch br ...

  • Fujitsu MX130 S2 - page 53

    MX130 S2 Upgrade and Maintenance Manual 53 Basic hardware procedures 4.4 Closing the front cage Figure 8: Closing the front cage Ê Carefully close the front cage. V CAUTION! Ensure that none of the cables are strained or trapped! Ê If you loosened any cables tighten them agai n. ...

  • Fujitsu MX130 S2 - page 54

    54 Upgrade and Maintenanc e Manual MX130 S2 Basic hardware procedures 4.5 Closing the server V CAUTION! ● Before attaching the c overs, make sure no unnecessary p ar ts or tools are left inside the server . ● In order to comply with applicable E MC r egulations (regul ations on electromagnetic comp atibility) and satisfy cooling requirements, t ...

  • Fujitsu MX130 S2 - page 55

    MX130 S2 Upgrade and Maintenance Manual 55 Basic hardware procedures Figure 10: Closing t he server cove r Ê Slide the server cover shut by engaging the loc king mechanism. 4.5.2 Connecting the server to the mains The PRIMERGY MX130 S2 Server is equipped with a st andard PSU . V CAUTION! The power supply automatically adj usts to any mains volt ag ...

  • Fujitsu MX130 S2 - page 56

    56 Upgrade and Maintenanc e Manual MX130 S2 Basic hardware procedures Connecting pow er cord Figure 1 1: Connecting power cord Ê Connect the power cord to the power supply . ...

  • Fujitsu MX130 S2 - page 57

    MX130 S2 Upgrade and Maintenance Manual 57 Basic hardware procedures Only for Japan: Connecting the cable tie Figure 12: Connecting the cable tie Ê Thread the cable tie through the eye (1). Ê Pull the cable tie tight to secure the power cord (2). The insulated connector cannot now be disconnected from th e server accidentall y . ...

  • Fujitsu MX130 S2 - page 58

    58 Upgrade and Maintenanc e Manual MX130 S2 Basic hardware procedures 4.6 Switching on the server V CAUTION! ● Before switching on the server , make sure the server cover is closed. In order to comply with applicable E MC r egulations (regul ations on electromagnetic comp atibility) and satisfy cooling requirements, th e PRIMERGY MX130 S2 server ...

  • Fujitsu MX130 S2 - page 59

    MX130 S2 Upgrade and Maintenance Manual 59 5 Basic sof tware procedures 5.1 St arti ng the maintenance t ask 5.1.1 Disabling BitLocker functionality BitLocker Drive Encryption provides protection for operating s ystem and data drives by encrypting the contents and requiring u s ers to authenticate their credentials to access the information. O n th ...

  • Fujitsu MX130 S2 - page 60

    60 Upgrade and Maintenanc e Manual MX130 S2 Basic sof tware procedures I Administrator permission required: If you are prompted for an administrator password or confirmation, ty pe the pas sword or provide confirmation. Ê T o temporarily disable BitLocker , click T urn Off BitLocker , and then click Disable BitLocker Drive Encryption . I In order ...

  • Fujitsu MX130 S2 - page 61

    MX130 S2 Upgrade and Maintenance Manual 61 Basic software procedures 5.1.3 V erifying and configuring the bac k up sof tware solution I This task only applies to the Japanese market. Depending on the backup software solution, it may be necessary to disable or delete the backup drive from the backup software drive list before st arting the maintenan ...

  • Fujitsu MX130 S2 - page 62

    62 Upgrade and Maintenanc e Manual MX130 S2 Basic sof tware procedures 5.2 Completing the m aintenance t ask 5.2.1 Updating th e syst em boa rd BIOS After replacing the sy stem board, it is essential to upgrade the BIOS to the latest version. The latest BIOS versions are available fr om the Fujit su support internet p ages at: http://ts.fujitsu.com ...

  • Fujitsu MX130 S2 - page 63

    MX130 S2 Upgrade and Maintenance Manual 63 Basic software procedures Ê Press the On / Off button to st art up the s erver . The system will detect the USB stick and the BIOS recovery process will be performed. V CAUTION! Do not interrupt the BIOS upgrade process after it has started. If the process is interrupted, the system BIOS may be permanentl ...

  • Fujitsu MX130 S2 - page 64

    64 Upgrade and Maintenanc e Manual MX130 S2 Basic sof tware procedures 5.2.3 Enabling Option ROM scan In order to configure an expansion card that has been installed or replaced, the card’s Option ROM has to be enabl ed in the sys tem board BIOS. The card’ s firmware is called by the system BIOS upon reboot a nd can be entered and configured. O ...

  • Fujitsu MX130 S2 - page 65

    MX130 S2 Upgrade and Maintenance Manual 65 Basic software procedures I Procedures may differ depending on the backup software. For details, refer to the dedicated documentati on provided separately . Further information on suitable ba c kup software solutions and r elated documentation i s available to Fujit s u service p artner s from the Fujits u ...

  • Fujitsu MX130 S2 - page 66

    66 Upgrade and Maintenanc e Manual MX130 S2 Basic sof tware procedures 5.2.6 Enabling BitLocker functionality If BitLocker Drive Encryption has been disabled for maint enanc e purposes (see section "Disabling BitLoc k er functionality " on p age 59 ), it has to be re-enabled to complete the service task. I If BitLocker Drive Encryption ha ...

  • Fujitsu MX130 S2 - page 67

    MX130 S2 Upgrade and Maintenance Manual 67 Basic software procedures 5.2.7 Performing a RAID a rray rebuild After replacing a hard di s k drive that has been combined into a R AID array , RAID rebuild will be performed completely unattended as a b ackground process. Figure 14: Progres s bar (RAI D array rebuild) V CAUTION! The system is now operati ...

  • Fujitsu MX130 S2 - page 68

    68 Upgrade and Maintenanc e Manual MX130 S2 Basic sof tware procedures 5.2.9 Using the Chas sis ID Prom T ool The Chassis ID EPROM located on the system board cont ains system information like server name and model, housing type, serial num ber and manufacturing data. In order to integrate your system into the S er verVi ew management environment a ...

  • Fujitsu MX130 S2 - page 69

    MX130 S2 Upgrade and Maintenance Manual 69 6 Power supply Basic information The PRIMERGY MX130 S2 server is equipped with a st andard PSU. V CAUTION! The server supports a mains volt age in the range of 100 V - 240 V Y ou may only operate the server if its rated volt age range c orresponds to the local main s volt age. Safety notes V CAUTION! ● D ...

  • Fujitsu MX130 S2 - page 70

    70 Upgrade and Maintenanc e Manual MX130 S2 Power supply 6.1 St an dar d PS U 6.1.1 Replaci ng the st andard PSU 6.1.1.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Replacing the PSU: – Phillips PH2 / (+ ) No. 2 screw driver 6.1.1.2 Preliminary step s Before replacing the standard PSU, perform the foll owing steps: I Y ou ...

  • Fujitsu MX130 S2 - page 71

    MX130 S2 Upgrade and Maintenance Manual 71 Power supply 6.1.1.3 Disconnecting int ernal power cables Figure 15: Disconnecting int ernal power cables Ê While pressing the release latch (1) on the connector , disconnect the PSU A TX power connector from system board connector POWER12V (2) / 0 ...

  • Fujitsu MX130 S2 - page 72

    72 Upgrade and Maintenanc e Manual MX130 S2 Power supply 6.1.1.4 Removing the PSU Figure 16: Removing the PSU Ê Remove four screws from the PSU (see circles). Ê Slide the defective PSU i nward by 3 cm (1) to disengage the locking mechanism. Ê Lift the defect ive PSU out of the chassis (2). / 0 ...

  • Fujitsu MX130 S2 - page 73

    MX130 S2 Upgrade and Maintenance Manual 73 Power supply 6.1.1.5 Installing the PSU Figure 17: Installing the PSU / 0 ...

  • Fujitsu MX130 S2 - page 74

    74 Upgrade and Maintenanc e Manual MX130 S2 Power supply Figure 18: Installing t he standard PS U Ê Insert the PSU into the chassis leav ing a gap of about 3 cm to the rear chassi s wall (1) in figure 17 . Ê Ensure that the mounting bracket on the chassis (see circle in figure 18 ) engages with the notch on the lower surface of the PSU. Ê Slide ...

  • Fujitsu MX130 S2 - page 75

    MX130 S2 Upgrade and Maintenance Manual 75 Power supply Figure 19: Securing the PSU Ê Secure the PSU to the chassis with four screws (M3 x 4.5 mm, s ee circles). ...

  • Fujitsu MX130 S2 - page 76

    76 Upgrade and Maintenanc e Manual MX130 S2 Power supply 6.1.1.6 Reconnecting intern al power cables Figure 20: Connecting internal power cables Ê Connect the PSU A TX power connector to system board connector POW ER1 2V . ...

  • Fujitsu MX130 S2 - page 77

    MX130 S2 Upgrade and Maintenance Manual 77 Power supply 6.1.1.7 Concluding steps Perform the following procedures to complete the t ask: Ê Follow all procedures desc ribed in section "Closing the server" on p age 54 . Ê If BitLocker functionality is used and has been disabled befo r e starting the maintenance task, re-enable BitLock er ...

  • Fujitsu MX130 S2 - page 78

    78 Upgrade and Maintenanc e Manual MX130 S2 Power supply ...

  • Fujitsu MX130 S2 - page 79

    MX130 S2 Upgrade and Maintenance Manual 79 7 HDDs and acce ssible drive s Safety notes V CAUTION! ● The HDDs must all be marked c learly so that they can be put back in their original places after an upgrade. If this is not done, existing data can be lost. ● When a HDD is starting up, a resonant nois e may be audible for a short while. This doe ...

  • Fujitsu MX130 S2 - page 80

    80 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives ● Do not touch the circuitry on boards or soldered part s . Hold circuit boards by their metallic areas or edges. ● Circuit boards and soldered p ar ts of i nter nal options are exposed and can be damaged by static electricity . Always discharge st atic build-up (e.g. by tou ...

  • Fujitsu MX130 S2 - page 81

    MX130 S2 Upgrade and Maintenance Manual 81 HDDs and accessible drives ● "Installi ng backup drive in 5.25-inch chassis bay " on page 130 ● "Removing backup drive out of 5.25-inch chassis bay" on page 133 ● "Installi ng s limline O DD in slimline chas sis bay" on p age 136 ● "Replacing slimli ne ODD out of ...

  • Fujitsu MX130 S2 - page 82

    82 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.2 Mounting order Maximum configuration: 4 x 3.5-inch HDD + slimline ODD Figure 21: Slimline ODD m ounting order with 4 x 3.5-inch HDD Figure 22: Slimline ODD mounting order with 3 x 3.5inch HDD or 2 x 3.5inch HDD and RDX Figure 23: HH ODD or RDX mounting order with 3 x 3.5-inc ...

  • Fujitsu MX130 S2 - page 83

    MX130 S2 Upgrade and Maintenance Manual 83 HDDs and accessible drives 7.3 Inst allin g 3.5-inch HDD in H DD1 / HDD2 chassis bay 7.3.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Install ing a 3.5-inch HDD: tool-less 7.3.2 Preliminary st eps Before installi ng a 3.5- inch HDD, perform the following step s: Ê Follow all proc ...

  • Fujitsu MX130 S2 - page 84

    84 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.3.3 Inst alling a 3.5-inch HDD in HDD 1/HDD 2 chassis bay Ê Detach and remove the Easy rails from the desired 3.5-inch HDD installation bay . Align the three pi ns on the E asy rails with the s crew holes on the new HDD. Figure 24: Instal ling the Easy rail on the 3. 5-inch H ...

  • Fujitsu MX130 S2 - page 85

    MX130 S2 Upgrade and Maintenance Manual 85 HDDs and accessible drives Figure 25: Inserting the 3.5-inch HDD Ê Insert the HDD into its inst al lation bay . ...

  • Fujitsu MX130 S2 - page 86

    86 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 26: Instal ling the 3.5-inch HDD Ê Slide the HDD into it s installation bay until the locking latc hes engage. ...

  • Fujitsu MX130 S2 - page 87

    MX130 S2 Upgrade and Maintenance Manual 87 HDDs and accessible drives Figure 27: Connecting the cables Ê Connect the two SA T A connectors to the HDDs (1 and 2). Ê Plug the cable with the green point to the upper HDD1. For orientation there is a second green point on the other end of thi s cable. Ê Connect the power connectors (3). 7.3.4 Conclud ...

  • Fujitsu MX130 S2 - page 88

    88 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.4 Removing 3.5-inch HDD out of HDD1 / HDD2 ch assis bay 7.4.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Removing a 3.5-inch HDD: tool-less 7.4.2 Prelim inary step s Before removing a 3.5-inch HDD, perform the following steps : Ê Ensure that the HDD t ...

  • Fujitsu MX130 S2 - page 89

    MX130 S2 Upgrade and Maintenance Manual 89 HDDs and accessible drives 7.4.3 Removing a 3.5-inch HDD out of HDD 1/HDD 2 chassis ba y Figure 28: Disconnecting t he cables from the a 3.5-inch HDD Ê Disconnect the power cable (2) and data cable (1). / 0 ...

  • Fujitsu MX130 S2 - page 90

    90 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 29: Removing a 3.5-inch HDD Ê Pull the two green handles of the Easy rails in the direction of arrow 1. Ê Pull the HDD with the two green handles of the Easy rails completely out of it s bay (2 ). Figure 30: Inserting t he Easy rails Ê Insert the Easy rails into the ba ...

  • Fujitsu MX130 S2 - page 91

    MX130 S2 Upgrade and Maintenance Manual 91 HDDs and accessible drives 7.4.4 Concluding step s Perform the following procedures to complete the t ask: Ê Close the front cage as described in section "Closing the front cage" on page 53 . Ê Follow all procedures desc ribed in section "Closing the server" on p age 54 . 7.5 Inst all ...

  • Fujitsu MX130 S2 - page 92

    92 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.5.3 Inst alling an additional 3. 5-inch HDD in 3.5-i nch chas sis b ay Figure 31: Inst alling the HDD in 3.5-inch chassi s bay Ê Insert the HDD into the drive bay and fasten the four screws (see circles). ...

  • Fujitsu MX130 S2 - page 93

    MX130 S2 Upgrade and Maintenance Manual 93 HDDs and accessible drives Figure 32: Connecting the cables to the HD D Ê Connect cables to the HDD. 1 Power cable connector P3 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4028-V153 7.5.4 Concluding step s Perform the following procedures to complete the t ask: Ê ...

  • Fujitsu MX130 S2 - page 94

    94 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.6 Removing additional 3.5-inch HDD out of 3.5-inch chassis bay 7.6.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Install ing a 3.5-inch HDD – Phillips PH2 / (+ ) No. 2 screw driver 7.6.2 Prelim inary step s Before installi ng a 3.5-inch HDD, perform t ...

  • Fujitsu MX130 S2 - page 95

    MX130 S2 Upgrade and Maintenance Manual 95 HDDs and accessible drives 7.6.3 Removing an additional 3.5-inch HDD out of 3.5- inch chassis bay Figure 33: Disconnecting t he cables from the H DD Ê Disonnect cables from the HDD. 1 Power cable connector P3 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4028-V153 / ...

  • Fujitsu MX130 S2 - page 96

    96 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 34: Removing the HDD f rom 3.5-inch c hassis bay Ê Remove the four screws (see circles) and remove the HDD from the drive bay . 7.6.4 Concluding step s Perform the following procedures to complete the t ask: Ê Close the front cage as described in section "Closing t ...

  • Fujitsu MX130 S2 - page 97

    MX130 S2 Upgrade and Maintenance Manual 97 HDDs and accessible drives 7.7 Inst alling additional 3.5-inch HDD in 5.25- inch dummy cover 7.7.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Install ing a 3.5-inch HDD – Phillip s PH2 / (+) No. 2 screw driver 7.7.2 Preliminary st eps Before installi ng a 3.5- inch HDD, perform ...

  • Fujitsu MX130 S2 - page 98

    98 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.7.3 Inst alling a 3.5-inch HDD in 5.25 -inch dummy cover Figure 35: Inst alling the HDD in the 5.25-inc h dummy cover Ê Insert the HDD into the 5.25-inch dummy cover (1) and fasten the four screws (2). Figure 36: Connecting the fixation plate to the 5.25-inc h dummy cover Ê ...

  • Fujitsu MX130 S2 - page 99

    MX130 S2 Upgrade and Maintenance Manual 99 HDDs and accessible drives Figure 37: Ins talling t he 5.25-inch dummy cover with HDD into the chassis bay Ê Insert the 5.25-inch dummy cover with HD D in the bay (1) until it snaps into place. Ê Open the front cage as described in se c tion "Opening the front cage" on page 52 . Figure 38: Conn ...

  • Fujitsu MX130 S2 - page 100

    100 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Ê Connect cables to the HDD. 1 Power cable connector P2 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4028-V153 7.7.4 Concluding step s Perform the following procedures to complete the t ask: Ê Close the front cage as described in sectio ...

  • Fujitsu MX130 S2 - page 101

    MX130 S2 Upgrade and Maintenance Manual 101 HDDs and accessible drives 7.8.3 Removing a 3.5-inch HDD out of 5.25-inch dummy cover Figure 39: Disconnecting t he cables from the H DD Ê Disconnect cables from the HDD. 1 Power cable connector P2 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4028-V153 Ê Close the ...

  • Fujitsu MX130 S2 - page 102

    102 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 40: Removing the 5. 25- inch dummy cover with HDD out of the the chassis bay Ê Push the green handle backward (1) and remove the 5.25-inch dummy cover with HDD out of the the bay (2). Figure 41: Removing the HDD out of the 5.25-inch dummy cover Ê Remove the four screws ...

  • Fujitsu MX130 S2 - page 103

    MX130 S2 Upgrade and Maintenance Manual 103 HDDs and accessible drives V CAUTION! Always replace dummy modules into u nused drive bays to comply with applicable EMC regulations and sa tisfy c ooling requirements. 7.8.4 Concluding step s Perform the following procedures to complete the t ask: Ê Install the 5.25-inch dummy cover as described in sect ...

  • Fujitsu MX130 S2 - page 104

    104 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.9.3 Insta lling an additional 3.5-inch HDD in ODD/HDD bracket Figure 42: Inst alling the HDD in the 5.25-inc h ODD/HDD bracket Ê Insert the HDD into the ODD/HDD bracket (1) and fasten the four screws (2). Figure 43: Connecting the fixation plate to the 5.25-inch O DD/HDD bra ...

  • Fujitsu MX130 S2 - page 105

    MX130 S2 Upgrade and Maintenance Manual 105 HDDs and accessible drives Figure 44: Inserting ODD/HDD brac ket in 5.25-inch chassis bay Ê Insert the ODD/HDD bracket in the bay (1) until it snaps into pl ac e. Ê Open the front cage as described in se c tion "Opening the front cage" on page 52 . Figure 45: Cabling of HDD and ODD in 5.25-inc ...

  • Fujitsu MX130 S2 - page 106

    106 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Ê Connect cables to the HDD. 1 Power cable connector P2 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4028-V153 Ê Connect cables to the ODD. 3 Power cable connector P4 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 4 SA T ...

  • Fujitsu MX130 S2 - page 107

    MX130 S2 Upgrade and Maintenance Manual 107 HDDs and accessible drives 7.10.2 Preliminary st ep s Before installi ng a 3.5- inch HDD, perform the following step s: Ê Follow all procedures described i n section "Opening the server" on page 48 . Ê Open the front cage as described in se c tion "Opening the front cage" on page 52 ...

  • Fujitsu MX130 S2 - page 108

    108 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Ê Disconnect cables to the ODD. 3 Power cable connector P4 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 4 SA T A cable T26139-Y4028-V201 Ê Close the front cage as described in section "Closing the front c age" on page 53 . Figure 47: Removing the 5. ...

  • Fujitsu MX130 S2 - page 109

    MX130 S2 Upgrade and Maintenance Manual 109 HDDs and accessible drives Figure 48: Removing t he fixation plate f rom the 5.25-inch ODD/HDD bracket Ê Remove the fixation plate from the 5.25-inch ODD/HDD bracket. Figure 49: Removing t he HDD out of the 5.25-inch ODD/HDD bracket Ê Remove the four screws (1) and pull the HDD out of the 5.25-inch ODD/ ...

  • Fujitsu MX130 S2 - page 110

    110 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.10.4 Concluding step s Perform the following procedures to complete the t ask: Ê Install the 5.25-inch dummy cover as described in se c tion "Install ing 5.25- inch dummy cover" on page 1 10 . Ê Follow all procedures described i n section "Closing the server& ...

  • Fujitsu MX130 S2 - page 111

    MX130 S2 Upgrade and Maintenance Manual 111 HDDs and accessible drives 7.1 1.3 Inst alling a 5.25-inch dummy cove r Figure 50: Connecting the fixation pl ate to the 5.25-inch dummy cover Ê Align the four pins of the fixation plate with the screw holes on the 5.25-inch dummy cover . Figure 51: Install ing the 5.25-inch dummy cover Ê Insert the dum ...

  • Fujitsu MX130 S2 - page 112

    112 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.1 1.4 Concluding step s Perform the following procedures to complete the t ask: Ê Follow all procedures described i n section "Closing the server" on page 54 . 7.12 Removing 5.25-inch dummy cover 7.12.1 Required tools ● Preliminary and concludi ng steps: tool-les ...

  • Fujitsu MX130 S2 - page 113

    MX130 S2 Upgrade and Maintenance Manual 113 HDDs and accessible drives 7.12.3 Removing a 5.25-inch dumm y cover Figure 52: Removing the 5.25-inch dummy cover Ê Push the green handle backward (1) and pull the dummy cover out of it s bay (2). V CAUTION! Always replace dummy modules into u nused drive bays to comply with applicable EMC regulations an ...

  • Fujitsu MX130 S2 - page 114

    114 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 53: Removing the fixation plate of the 5.25-inch dummy cover Ê Remove the fixation plate from the dummy c over . V CAUTION! Save the fixation plate for future use. Y ou have to install the fi xation plate to the different driv e c ages before installati on. 7.12.4 Concl ...

  • Fujitsu MX130 S2 - page 115

    MX130 S2 Upgrade and Maintenance Manual 115 HDDs and accessible drives 7.13 Inst alling ODD i n 5.25-inch chassis bay 7.13.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Install ing ODD: tool-less 7.13.2 Preliminary st ep s Before installi ng an O DD, perform the following steps : Ê Disable BitLocker functiona lity as des c ...

  • Fujitsu MX130 S2 - page 116

    116 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.13.3 Inst alling an ODD in 5.25-inch c hassis bay Ê Connect the fixation plate to the ODD. Figure 54: Instal ling HH ODD Ê Insert the half-height ODD in the bay (1) until it snap s into place. Ê Open the front cage as described in section "Opening the front cage" ...

  • Fujitsu MX130 S2 - page 117

    MX130 S2 Upgrade and Maintenance Manual 117 HDDs and accessible drives Figure 55: Connecting cables to the HH O DD Ê Connect cables to the HH ODD. 1 Power cable connector P2 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4028-V102 7.13.4 Concluding step s Perform the following procedures to complete the t ask: ...

  • Fujitsu MX130 S2 - page 118

    118 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.14 Removing ODD out of 5.25-inch chassis bay 7.14.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Install ing an ODD: tool-less 7.14.2 Prelim inary step s Before removing an ODD, perform the following step s: Ê Disable BitLocker functionality as descri ...

  • Fujitsu MX130 S2 - page 119

    MX130 S2 Upgrade and Maintenance Manual 119 HDDs and accessible drives 7.14.3 Removing an ODD out of 5.25-inch c hassis bay Figure 56: Disconnecting c ables of the HH ODD Ê Disconnect cables of the HH ODD. 1 Power cable connector P2 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4028-V102 Ê Close the front ca ...

  • Fujitsu MX130 S2 - page 120

    120 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 57: Removing HH ODD Ê Push the green handle backward (1) and pull the half-height ODD out of the bay (2). Ê Disconnect the fixation plate from the HH ODD cage. V CAUTION! Always replace dummy modules into unused driv e bays to comply with applicable EMC regulations and ...

  • Fujitsu MX130 S2 - page 121

    MX130 S2 Upgrade and Maintenance Manual 121 HDDs and accessible drives 7.15 Inst alling sliml ine ODD in 5.25-inch ODD/HDD bracket 7.15.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Install i ng a slim line ODD: – EMEA: T orx Plus Size 6 – Japan: Phil ips (+) No.00 screw driver 7.15.2 Preliminary st ep s Before installi ...

  • Fujitsu MX130 S2 - page 122

    122 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.15.3 Inst alling a slimline ODD in 5.25-inch ODD/HDD bracket Figure 58: Inst alling the ODD in the 5. 25-inch ODD/HDD bracket Ê Insert the ODD into it s installati on bay and carefully push in until the screw holes are matching. Figure 59: Fastening t he screws Ê Fasten the ...

  • Fujitsu MX130 S2 - page 123

    MX130 S2 Upgrade and Maintenance Manual 123 HDDs and accessible drives Figure 60: Connecting t he fi xation plate to the 5. 25 -inch ODD/HDD bracket Ê Align the four pins of the fixation plate with the screw holes on the 5.25-inch ODD/HDD bracket. Figure 61: Installing the 5.25-inch ODD/HDD bracket with the slimline ODD Ê Insert the 5.25-inch ODD ...

  • Fujitsu MX130 S2 - page 124

    124 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Ê Open the front cage as described in section "Opening the front cage" on page 52 . Figure 62: Connecting cables of t he slimline ODD in 5.25-inch ODD/HDD bracket Ê Connect cables to the slimline ODD. 1 Power cable connector P4 (see "Power cable T26139-Y4012-V2 ...

  • Fujitsu MX130 S2 - page 125

    MX130 S2 Upgrade and Maintenance Manual 125 HDDs and accessible drives 7.16 Removing slimline ODD out of 5.25- inch ODD/HDD bracket 7.16.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Removing a slimline O DD – EMEA: T orx Plus Size 6 – Japan: Phil ips (+) No.00 screw driver 7.16.2 Preliminary st ep s Before removing a s ...

  • Fujitsu MX130 S2 - page 126

    126 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.16.3 Removing a slimline ODD out of 5.25-inch ODD/HDD bracket Figure 63: Disconnectin g cables of the sl imline ODD in 5.25-inch ODD/HDD bracket Ê Disconnect cables to the sliml i ne ODD. 1 Power cable connector P4 (see "Power cable T26139-Y4012-V21 1" on page 239 ...

  • Fujitsu MX130 S2 - page 127

    MX130 S2 Upgrade and Maintenance Manual 127 HDDs and accessible drives Figure 64: Removing the 5. 2 5-inch ODD/HDD bracket with t he slimline ODD Ê Push the green handle backward (1) and pull the 5.25-inch ODD/HDD bracket out of its bay (2). V CAUTION! Always replace dummy modules into u nused drive bays to comply with applicable EMC regulations a ...

  • Fujitsu MX130 S2 - page 128

    128 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 65: Removing the screws Ê Remove the three screws. Figure 66: Removing the ODD out of the 5.25-inch ODD/HDD bracket Ê Remove the ODD from it s installation b ay . ...

  • Fujitsu MX130 S2 - page 129

    MX130 S2 Upgrade and Maintenance Manual 129 HDDs and accessible drives Figure 67: Removing t he fixation plate of the 5.25-inch ODD/HDD bracket Ê Remove the fixation plate from the 5.25-inch ODD/HDD bracket. 7.16.4 Concluding step s Perform the following procedures to complete the t ask: Ê Install the 5.25-inch dummy cover as described in section ...

  • Fujitsu MX130 S2 - page 130

    130 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.17 Inst alling backup drive in 5.25-inch chassis bay 7.17.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Removing accessible drives: tool-l ess 7.17.2 Prelim inary step s Before instal ling an accessible drive, perform the following s teps: Ê Disable B ...

  • Fujitsu MX130 S2 - page 131

    MX130 S2 Upgrade and Maintenance Manual 131 HDDs and accessible drives 7.17.3 Inst alling a backup driv e in 5.25- inch chassis bay Figure 68: Connecting the fixation pl a te to the 5. 25 -inch chassis bay Ê Align the four pins of the fixation plate with the screw holes on the 5.25-inch chassi s bay . Figure 69: Installing the backup dr ive Ê Pus ...

  • Fujitsu MX130 S2 - page 132

    132 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 70: Connecting cables to the backup drive Ê Connect cables to the backup drive. 1 Connect the power connector P2 (see "Power cable T26139-Y4012- V21 1" on page 239 ) to the power adapter cable SNP:A3C40057660 and then connect the adapter cable to the backup dr ...

  • Fujitsu MX130 S2 - page 133

    MX130 S2 Upgrade and Maintenance Manual 133 HDDs and accessible drives 7.18 Removing backup drive out of 5.25-inch chassis bay 7.18.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Removing a backup drive: tool-less 7.18.2 Preliminary st ep s Before removing a backup drive, perform the following step s: Ê Disable BitLocker fu ...

  • Fujitsu MX130 S2 - page 134

    134 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.18.3 Removing backup drive out of 5 .25-inch chas sis bay Figure 71: Disconnect ing cabl es from the bac kup drive Ê Disconnect all cables from the backup drive. Ê Disconnect cables from the backup drive. 1 Disconnect the adapter cable from the backup drive and then disconn ...

  • Fujitsu MX130 S2 - page 135

    MX130 S2 Upgrade and Maintenance Manual 135 HDDs and accessible drives Figure 72: Removing the backup drive Ê Push the green handle backward (1) and pull the backup drive out of it s bay (2). V CAUTION! Always replace dummy modules into u nused drive bays to comply with applicable EMC regulations and sa tisfy c ooling requirements. 7.18.4 Concludi ...

  • Fujitsu MX130 S2 - page 136

    136 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.19 Inst alling slim line ODD in slimline chassis bay 7.19.1 Required tools ● Preliminary and concludi ng s teps : – Slotted screw driver (only for removing the ODD filler cover) ● Install ing accessible drives: tool-less 7.19.2 Prelim inary step s Before instal ling an ...

  • Fujitsu MX130 S2 - page 137

    MX130 S2 Upgrade and Maintenance Manual 137 HDDs and accessible drives 7.19.3 Removing the ODD filler c over Figure 73: Removing the ODD fill er cover Ê Using a slotted screw driver , pry the ODD filler cover out of its bay and remove it from its installation bay . V CAUTION! The ODD filler cover is not for future use. Y ou cannot install the ODD ...

  • Fujitsu MX130 S2 - page 138

    138 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.19.4 Inst alling the ODD Figure 74: Instal ling the ODD Ê Attach the inst allation bracket to the ODD as shown. ...

  • Fujitsu MX130 S2 - page 139

    MX130 S2 Upgrade and Maintenance Manual 139 HDDs and accessible drives Figure 75: Installing the ODD Ê Ensure that the hooks on the inst allation bracket properly engage with the screw holes on the ODD (see circles). Figure 76: Installing the ODD Ê Insert the ODD in the bay until it s naps into place. ...

  • Fujitsu MX130 S2 - page 140

    140 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Ê Open the front cage as described in section "Opening the front cage" on page 52 . Figure 77: Connecting cables to the ODD Ê Connect cables to the ODD. 1 Power cable connector P4 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4 ...

  • Fujitsu MX130 S2 - page 141

    MX130 S2 Upgrade and Maintenance Manual 141 HDDs and accessible drives Figure 78: Removing the ODD cover Ê Press the ODD cover out from inside to outside of the server cover . Ê Remove the ODD cover 7.19.5 Concluding step s Perform the following procedures to complete the t ask: Ê Close the front cage as described in section "Closing the fr ...

  • Fujitsu MX130 S2 - page 142

    142 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives 7.20 Replacing slim line ODD out of slimline chassis bay 7.20.1 Required tools ● Preliminary and concludi ng s teps : ● Removing accessible drives: tool -less 7.20.2 Prelim inary step s Before replacing an accessible drive, perform the foll ow ing step s: Ê Disable BitLock ...

  • Fujitsu MX130 S2 - page 143

    MX130 S2 Upgrade and Maintenance Manual 143 HDDs and accessible drives 7.20.3 Replacing a slimline ODD out of slimline chassis bay Figure 79: Disconnecting c ables from the ODD Ê Disconnect all cables from the ODD. 1 Power cable connector P4 (see "Power cable T26139-Y4012-V21 1" on page 239 ) 2 SA T A cable T26139-Y4028-V102 Ê Close the ...

  • Fujitsu MX130 S2 - page 144

    144 Upgrade and Maintenanc e Manual MX130 S2 HDDs and accessible drives Figure 80: Removing the ODD Ê Press the green locking (1) and pull the ODD out of it s bay (2). Ê Install a new O DD in this ba y . 7.20.4 Concluding step s Perform the following procedures to complete the t ask: Ê Follow all procedures described i n section "Closing th ...

  • Fujitsu MX130 S2 - page 145

    MX130 S2 Upgrade and Maintenance Manual 145 8 System fan Basic information The PRIMERGY MX130 S2 server features one system fan module. I Additional fans in PSU and processor heat sink cannot be replaced individually . V CAUTION! Since the system fan is not redundant is has to be replaced immediately in case of defects or pre-failure events. Safety ...

  • Fujitsu MX130 S2 - page 146

    146 Upgrade and Maintenanc e Manual MX130 S2 System fan 8.1 Replacing the system fan module 8.1.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Replacing the fan module: – Side cutter / pincer 8.1.2 Prelim inary step s Before replacing the fan module, perform the following s teps: Ê Follow all procedures described in s ecti ...

  • Fujitsu MX130 S2 - page 147

    MX130 S2 Upgrade and Maintenance Manual 147 System fan 8.1.3 Removing the system fan module Figure 81: Disconnecting t he cable of the system fan module Ê Disconnect the fan cable from system board connector F AN2. ...

  • Fujitsu MX130 S2 - page 148

    148 Upgrade and Maintenanc e Manual MX130 S2 System fan Figure 82: Cutting the f r ont fan rivet s Ê T ear the front fan rivets a little out and cut them with a s i de cutter . ...

  • Fujitsu MX130 S2 - page 149

    MX130 S2 Upgrade and Maintenance Manual 149 System fan Figure 83: Removing the system fan module Ê Pull the fan cable out of the chassis. Ê T ake the sys tem fan module out from the c hassis. ...

  • Fujitsu MX130 S2 - page 150

    150 Upgrade and Maintenanc e Manual MX130 S2 System fan 8.1.4 Inst alling the sys tem fan module Figure 84: Fitting the new system fan module with new front fan r ivet s Ê Fit four new front fan rivets into the fan. ...

  • Fujitsu MX130 S2 - page 151

    MX130 S2 Upgrade and Maintenance Manual 151 System fan Figure 85: System fan with installed fan rivets Ê The front system fan has four fan rivets A, B, C and D (see circles). A B C D ...

  • Fujitsu MX130 S2 - page 152

    152 Upgrade and Maintenanc e Manual MX130 S2 System fan Figure 86: Installing t he sys tem fan module Ê Insert the system fan module into the chass is. Figure 87: Fitting front fa n rivets Ê Put the two front fan rivets A and B into the fan slots in the chassis with the help of a pincer (see circles). B B A B ...

  • Fujitsu MX130 S2 - page 153

    MX130 S2 Upgrade and Maintenance Manual 153 System fan Figure 88: Position of f ront fan rivets A and B Ê Make sure that both front fan rivets A and B fit the hol es in the chassis fan slots ( see cir cles) . Figure 89: Position of all front fan rivets Ê The two front fan rivets C and D also must fi t the holes in the chassis fan slots ( see cir ...

  • Fujitsu MX130 S2 - page 154

    154 Upgrade and Maintenanc e Manual MX130 S2 System fan Figure 90: Fitting front fa n rivet C Ê Use a pincer to fit front fan rivet C in the hole in the chassis fan s lot (see circle ). Figure 91: Fitting front fa n rivet D Ê Use a pincer to fit front fan rivet D in the hole in the chassis fan s lot (see circle ). C D ...

  • Fujitsu MX130 S2 - page 155

    MX130 S2 Upgrade and Maintenance Manual 155 System fan Figure 92: Position of the front fan rivets in the chassis fan slots Ê Make sure that all front fan rivets match the holes in the c hassis fan slots (see circ les). Figure 93: Initial position of a f ront fan rivet in th e chassis fan slot First, the front fan rivets are stic king out of the c ...

  • Fujitsu MX130 S2 - page 156

    156 Upgrade and Maintenanc e Manual MX130 S2 System fan Figure 94: Final position of a front fan rivet in t he chass is fan slot Ê T ear out the front fan rivets a little bit. Figure 95: Cutting the overlaying p art of the front fan rivets Ê Cut the overlaying part of the front fan rivet s (1) with the side cutter (2). Ê Install the fan cable. / ...

  • Fujitsu MX130 S2 - page 157

    MX130 S2 Upgrade and Maintenance Manual 157 System fan Figure 96: Connecting the system fan cable Ê Connect the fan cable to system board connector F AN2. 8.1.5 Concluding step s Ê Follow all procedures desc ribed in section "Closing the server" on p age 54 . ...

  • Fujitsu MX130 S2 - page 158

    158 Upgrade and Maintenanc e Manual MX130 S2 System fan ...

  • Fujitsu MX130 S2 - page 159

    MX130 S2 Upgrade and Maintenance Manual 159 9 Exp an sion cards This chapter provides information on how to install , remov e or replace expansion cards. Safety notes V CAUTION! ● Do not damage or modify internal cables or devices. Doing so m ay cause a device failure, fire, or electric shock. ● Devices and components inside the server remain h ...

  • Fujitsu MX130 S2 - page 160

    160 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards 9.1 Basic procedure The system board is equipped with four exp ansion slots: Figure 97: PCI slot overview Sl ot se quen ce PCI slot T ype Function 1 PCI 32 bit / 33 MHz 2 PCIe x16 (mechanical wid th: x 16) 3 PCIe x4 (mechanical wid th: x4) 4 PCIe x1 (mechanical wid th: x1) Exp ansion Ca ...

  • Fujitsu MX130 S2 - page 161

    MX130 S2 Upgrade and Maintenance Manual 161 Expansion cards 9.2 Exp ansion cards 9.2.1 Inst alling exp ansion cards 9.2.1.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Install ing expansion cards: tool-less 9.2.1.2 Preliminary step s Before installi ng an ex pans ion card, perform the following step s : Ê Disable BitLocker ...

  • Fujitsu MX130 S2 - page 162

    162 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards 9.2.1.3 Removing a PCI slot bracket Figure 98: Opening the PCI slot bracket c lamp Ê Fold up the slot bracket clamp. ...

  • Fujitsu MX130 S2 - page 163

    MX130 S2 Upgrade and Maintenance Manual 163 Expansion cards Figure 99: Removing the PCI slot bracket Ê Remove the slot bracket. V CAUTION! Keep the slot bracket for further use. Always replace slot brackets i nto unused PCI slot openings to comply with applicable EMC regulations and satisfy cooling requirement s. 9.2.1.4 Installing an exp ansion c ...

  • Fujitsu MX130 S2 - page 164

    164 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards Figure 100: Instal ling the expansion card Ê Carefully insert the expansion card into the desired PCI slot and pr ess down firmly until it is fully seated in the slot. Ê Fold down slot bracket clamp until it locks in place. ...

  • Fujitsu MX130 S2 - page 165

    MX130 S2 Upgrade and Maintenance Manual 165 Expansion cards 9.2.1.5 Connecting cables t o the exp ansion card Ê If applicable, connect in ter nal cables to the exp ans ion card. I For a complete cabling overview , please refer to section "Cabling" on page 235 . 9.2.1.6 Concluding steps Perform the following procedures to complete the t a ...

  • Fujitsu MX130 S2 - page 166

    166 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards 9.2.2.2 Preliminary step s Before removing an expansion card, perform the foll owing steps: Ê Disable BitLocker functionality as descri bed in section "Disabling BitLocker functionality" on p age 59 . Ê Follow all procedures described in s ection "Opening the server" ...

  • Fujitsu MX130 S2 - page 167

    MX130 S2 Upgrade and Maintenance Manual 167 Expansion cards 9.2.2.4 Installing a PCI slot bracket V CAUTION! Always replace slot brackets into unused PCI slot openings to c omply with applicable EM C regulations and satisfy cooling requirement s. Figure 102: Installing a PCI slot bracket Ê Insert a PCI slot bracket into the unused PCI slot opening ...

  • Fujitsu MX130 S2 - page 168

    168 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards 9.2.3 Inst alling eSA T A cable 9.2.3.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Install ing expansion cards: tool-les s 9.2.3.2 Preliminary step s Before instal ling an exp ansion cable, perform the following step s : Ê Follow all procedures described in s ec ...

  • Fujitsu MX130 S2 - page 169

    MX130 S2 Upgrade and Maintenance Manual 169 Expansion cards Figure 103: Installing the eS A T A cable Ê Carefully insert the eSA T A cable into the desired PCI s lot and press down firmly until it is fully seated in the slot. Ê Fold down slot bracket clamp until it lock s in place. ...

  • Fujitsu MX130 S2 - page 170

    170 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards 9.2.3.4 Connecting cable o f the eSA T A cable to connector Figure 104: Connecting the eSA T A cable Ê Connect the end of eSA T A cable to the syst em board connector SA T A6. Ê Fold the cable carefully as shown in the picture. 9.2.3.5 Concluding steps Perform the following procedures ...

  • Fujitsu MX130 S2 - page 171

    MX130 S2 Upgrade and Maintenance Manual 171 Expansion cards 9.2.4.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Removing expansion cards: tool-less 9.2.4.2 Preliminary step s Before removing an eSA T A cable, perform the following s teps: Ê Follow all procedures described i n section "Opening the server" on page ...

  • Fujitsu MX130 S2 - page 172

    172 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards 9.2.4.4 Removing an eSA T A cable Figure 106: Removing an eSA T A cable Ê Fold up the locking han dle on the slot bracket clamp. Ê Carefully remove the eSA T A c able from it s slot. 9.2.4.5 Concluding steps Perform the following procedures to complete the t ask: Ê Install a PCI slot ...

  • Fujitsu MX130 S2 - page 173

    MX130 S2 Upgrade and Maintenance Manual 173 Expansion cards 9.3 Additional t asks This section provides additional exp ansion card related information on how to install s l ot brackets. 9.3.1 Mounting exp ansion card slot bracket s This section provides general instructions on m ounting slot brackets as well as specific instructions for the followi ...

  • Fujitsu MX130 S2 - page 174

    174 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards 9.3.1.2 Network adapter D2907 Figure 107: Network adapter D2907 - Mounting the slot bracket (A) Ê Place the controller on the mounting t abs on the slot bracket (1). Ê Carefully shift the slot bracket towards the controller (2) until the plug shells engage with the cut-outs in the s lo ...

  • Fujitsu MX130 S2 - page 175

    MX130 S2 Upgrade and Maintenance Manual 175 Expansion cards Figure 108: Network adapt er D2907 - M ounting the slot bracket (B ) Ê Secure the slot bracket to the controller with two M3 x 4.5 mm screws. Figure 109: Network adapt er D2907 - M ounting the slot bracket (C ) I Assembled network adapter D2907. ...

  • Fujitsu MX130 S2 - page 176

    176 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards 9.3.1.3 Network adapter D2745 Figure 1 10: Network adapter D2745 - Mounting the slot bracket (A) Ê Hinge the slot bracket to the plug shell as shown (1). Ê Fold the slot bracket towards the controller until the threaded mounti ng tab is aligned with the screw hole on the controller (2) ...

  • Fujitsu MX130 S2 - page 177

    MX130 S2 Upgrade and Maintenance Manual 177 Expansion cards Figure 1 1 1: Network adapter D2745 - Mounting t he slot bracket (B) Ê Secure the slot bracket to the controller with one M3 x 4.5 mm screw . Figure 1 12: Network adap ter D2745 - M ounting the slot bracket (C) I Assembled network adapter D2745 ...

  • Fujitsu MX130 S2 - page 178

    178 Upgrade and Maintenanc e Manual MX130 S2 Exp ansion cards ...

  • Fujitsu MX130 S2 - page 179

    MX130 S2 Upgrade and Maintenance Manual 179 10 Main m emory Safety notes V CAUTION! ● Do not install unsupported third party memory modules. For further information on supported memory modules, refer to section "Basic procedure" on page 180 . ● Memory modules remain hot after shutdown. W ait for components to cool down before installi ...

  • Fujitsu MX130 S2 - page 180

    180 Upgrade and Maintenanc e Manual MX130 S2 Main memory 10.1 Basic procedure – The system board is equipped with four memory connectors. – The system has to be equipped with at least one memo r y module. Populate memory slot 1 first. – Supported memory modules: DDR3-1066 PC3-8500, DDR3-1333 PC3-10600 or DDR3-1600 PC3- 12800U unbuffered singl ...

  • Fujitsu MX130 S2 - page 181

    MX130 S2 Upgrade and Maintenance Manual 181 Main memory 10.1.2 Operation modes – The maximum performance can be achieved in a symmetric dual-channel configuration. Therefore both channels have to be populated with the sa me amount of memory . The DRAM device technology (1 Gbit / 2 Gbit / 4 Gbit) may vary from one channel to the other . – If the ...

  • Fujitsu MX130 S2 - page 182

    182 Upgrade and Maintenanc e Manual MX130 S2 Main memory 10.2 In st alling memory m odules 10.2.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Install ing memory modules: tool-less 10.2.2 Preliminary step s Before installi ng a memory module, perform the followi ng steps: Ê Disable BitLocker functionality as descri bed in se ...

  • Fujitsu MX130 S2 - page 183

    MX130 S2 Upgrade and Maintenance Manual 183 Main memory Figure 1 15: Installing memory modules (B) Ê Align the notch on the bottom of the modu le with the crossbar in the connector . Ê Press down on the memory module until the securing clip s snap into the cutouts at each end of the modul e. 10.2.4 Concluding step s Perform the following procedur ...

  • Fujitsu MX130 S2 - page 184

    184 Upgrade and Maintenanc e Manual MX130 S2 Main memory 10.3 Removing memory m odules 10.3.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Removing memory modules: tool-les s 10.3.2 Preliminary step s Before removing a memory module, perform the following step s: Ê Disable BitLocker functionality as descri bed in section &qu ...

  • Fujitsu MX130 S2 - page 185

    MX130 S2 Upgrade and Maintenance Manual 185 Main memory Figure 1 16: Removing memory modules Ê Eject the desired memory module by pressing out the securing clips at each end of the memory module connector . Ê Remove the ejected memory module. 10.3.4 Concluding step s Perform the following procedures to complete the t ask: Ê Follow all procedures ...

  • Fujitsu MX130 S2 - page 186

    186 Upgrade and Maintenanc e Manual MX130 S2 Main memory ...

  • Fujitsu MX130 S2 - page 187

    MX130 S2 Upgrade and Maintenance Manual 187 1 1 Processor s Safety notes V CAUTION! ● Do not install unsupported processors. For further information on supported processors, refer to s ection "Basic procedure" on page 188 . ● Circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity . A ...

  • Fujitsu MX130 S2 - page 188

    188 Upgrade and Maintenanc e Manual MX130 S2 Processors 1 1.1 Basic procedure Supported processors – AMD FX, AMD Sempron, Athlon II, Phenom II – Socket type: AM3+ – Thermal Design Power (TDP) class: 95W 1 1.2 Replacing the processor heat sink 1 1.2.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Removing and installi ng ...

  • Fujitsu MX130 S2 - page 189

    MX130 S2 Upgrade and Maintenance Manual 189 Processors 1 1.2.3 Removing the processor heat sink Figure 1 17: Removing the processor heat s ink Ê Loosen the four captive screws on the heat sink in a crossover pattern. Ê Disconnect the CPU fan cable from the system board connector F A N1. Ê Carefully turn the heat sink back and forth to detach it ...

  • Fujitsu MX130 S2 - page 190

    190 Upgrade and Maintenanc e Manual MX130 S2 Processors 1 1.2.4 Thermal p aste I On a new CPU heat sink a thin layer of thermal compound has already been pre-applied to its lower surface. This layer of thermal compound is protected by a cover . Ê Remove the cover at the lower surface of the new heat sink. 1 1.2.5 Insta lling the processor heat sin ...

  • Fujitsu MX130 S2 - page 191

    MX130 S2 Upgrade and Maintenance Manual 191 Processors Ê Fasten the four captive screws on the heat sink (screw torque: 0.6 Nm, not applicable for the Japanese market). Ê Connect the CPU fan cable to the system board connector F AN1. 1 1.2.6 Concluding step s Perform the following procedures to complete the t ask: Ê Follow all procedures desc ri ...

  • Fujitsu MX130 S2 - page 192

    192 Upgrade and Maintenanc e Manual MX130 S2 Processors 1 1.3.2 Preliminary steps Before upgrading or replacing the processor , per form the following steps: Ê Disable BitLocker functionality as descri bed in section "Disabling BitLocker functionality" on p age 59 . Ê Follow all procedures described in s ection "Opening the server& ...

  • Fujitsu MX130 S2 - page 193

    MX130 S2 Upgrade and Maintenance Manual 193 Processors Figure 120: Removing the processor Ê Carefully remove the defective processor from its socket in a vertical motion. ...

  • Fujitsu MX130 S2 - page 194

    194 Upgrade and Maintenanc e Manual MX130 S2 Processors 1 1.3.5 Insta lling the processor Figure 121: Installing t he proces sor Ê Hold the processor with your thumb and index finger . Make sure that the indication triangle on the processor al igns with the notch on the socket. Ê Lower the processor straight down without tilting or sliding it in ...

  • Fujitsu MX130 S2 - page 195

    MX130 S2 Upgrade and Maintenance Manual 195 Processors Figure 122: Latching the socket lever Ê Latch the socket lever . ...

  • Fujitsu MX130 S2 - page 196

    196 Upgrade and Maintenanc e Manual MX130 S2 Processors 1 1.3.6 Applying thermal p aste I For the Japanese market, follow the instructions provided separately . I If the processor upgrade or replacement kit contains a new CPU heat sink, a thin layer of thermal compound has al ready been pre-applied to its lower surface. This layer of thermal compou ...

  • Fujitsu MX130 S2 - page 197

    MX130 S2 Upgrade and Maintenance Manual 197 Processors Figure 124: Applying therm al paste Ê Apply a small streak of thermal p as te (1.0 gram, see description above) to the center of the processor surface as shown. V CAUTION! Do not mix dif fer ent types of thermal p aste. 1 1.3.7 Inst alling the proc essor heat sink Refer to section "Instal ...

  • Fujitsu MX130 S2 - page 198

    198 Upgrade and Maintenanc e Manual MX130 S2 Processors ...

  • Fujitsu MX130 S2 - page 199

    MX130 S2 Upgrade and Maintenance Manual 199 12 System bo ard and compone nt s This chapter provides information on how to replace the system board and system board components as its CMOS battery and the T rusted Platform Module (TPM). Safety notes V CAUTION! ● Devices and components inside the server remain hot af ter shutdown. Af ter shutting do ...

  • Fujitsu MX130 S2 - page 200

    200 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s 12.1 Replacing the CMOS battery CMOS memory (volatile BIOS memory) and the real-time clock are powered by a lithium coin cell (CMOS battery). This cell last s two to ten years, depending on ambient temperature and use. If the CMOS battery is depleted or falls below minim um ...

  • Fujitsu MX130 S2 - page 201

    MX130 S2 Upgrade and Maintenance Manual 201 System board and comp onents 12.1.2 Preliminary step s Before replacing the CMOS battery , perform the following steps: Ê Follow all procedures described i n section "Opening the server" on page 48 . 12.1.3 Removing the CMOS battery Figure 125: Removing the CMOS battery Ê Press out on the lock ...

  • Fujitsu MX130 S2 - page 202

    202 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s Ê Carefully pry the depleted CMOS battery out of its s ocket. Ê Remove the CMOS battery (2). I Do not throw the CMOS battery into the trash can. Lithium batteries must be disposed of in accordanc e with l ocal regulations concerning special waste. 12.1.4 Inst alling the CM ...

  • Fujitsu MX130 S2 - page 203

    MX130 S2 Upgrade and Maintenance Manual 203 System board and comp onents This information does not apply to the Jap anese market. Do not throw lithium batteries into the trash can. They must be disposed of in accordance with local r egulations concerning s pecial waste. Make sure that you insert the battery the right way round. The plus pole must b ...

  • Fujitsu MX130 S2 - page 204

    204 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s 12.2 T rusted Plat form Module (TPM) This section provides information on how to inst all, remove or replace the T rusted Platform Module (TPM). 12.2.1 Inst alling the TPM board 12.2.1.1 Required tools ● Preliminary and concludi ng s teps : – Phillips PH2 / (+ ) No. 2 sc ...

  • Fujitsu MX130 S2 - page 205

    MX130 S2 Upgrade and Maintenance Manual 205 System board and comp onents 12.2.1.3 Installing the TPM board Figure 127: TPM kit TPM kit (S26361-F3299-E2): 1 TPM module S26361-D2727-A10 2 TPM spacers I Use the white TPM spacer (A3C40106008). The black TPM spacer is not used i n this server . 3 TPM special screw C26192-Y10-C176 4 TPM bit insert for TP ...

  • Fujitsu MX130 S2 - page 206

    206 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s Figure 128: TPM m ounting location (detail) TPM mounting location on the system board: 1 Cut-out for TPM spacer 2 TPM connector Figure 129: Installing t he T PM spacer Ê Snap the TPM spacer into the c ut- out in the system board. 0 / ...

  • Fujitsu MX130 S2 - page 207

    MX130 S2 Upgrade and Maintenance Manual 207 System board and comp onents Figure 130: Installing the TPM boar d Ê Connect the new TPM board to the system board. Figure 131: TPM bit insert Ê Attach the T PM bit insert or TPM m odule fix ing tool (Japanese market) to a bit screw driver . ...

  • Fujitsu MX130 S2 - page 208

    208 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s Figure 132: Securing the TPM board Ê Secure the TPM board with the TPM special s crew using the TPM bit insert. I Do not fasten the screw too firmly . S top as soon as the head of the screw lightly touches the TPM board. 12.2.1.4 Concluding steps Perform the following proce ...

  • Fujitsu MX130 S2 - page 209

    MX130 S2 Upgrade and Maintenance Manual 209 System board and comp onents I For detailed inform ation on how to access the BIOS and modify settings, refer to the "Description - BIOS Manual D3090 / D3091" available online at http://manuals.ts.fujitsu.com or from the ServerView Suite DVD 2 supplied with your PRIMERGY server . Ê If BitLocker ...

  • Fujitsu MX130 S2 - page 210

    210 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s 12.2.2.2 Preliminary steps Before removing the TPM board, perform the following step s : Ê Before removing the TPM board, it is necessary to remove BitLocker- protection from the computer and to decrypt the volume. Ask the system administrator to turn off Bi tLoc ker-protec ...

  • Fujitsu MX130 S2 - page 211

    MX130 S2 Upgrade and Maintenance Manual 211 System board and comp onents Ê Follow all procedures described i n section "Opening the server" on page 48 . 12.2.2.3 Removing the TPM bo ard Ê Remove the system board as described in s ection "Removing the system board" on page 215 . Ê Lay the system board on a soft, antis tatic su ...

  • Fujitsu MX130 S2 - page 212

    212 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s Ê Carefully loosen the TPM screw using a thin slotted screw driver (e.g. watchmaker's screw driver) or the dedicated TPM screw driver (Japanese market) (2). V CAUTION! Ensure to turn the screw in the direction of the arrow in order to remove it! Slowly and carefully in ...

  • Fujitsu MX130 S2 - page 213

    MX130 S2 Upgrade and Maintenance Manual 213 System board and comp onents 12.3 Replacing the system board 12.3.1 Required tools Note on TPM I The system board can be equipped with an optional TPM (T rusted Platform Module). This module enables third p arty programs to store key information (e. g. drive encryption using W i ndows Bitlocker Drive Encr ...

  • Fujitsu MX130 S2 - page 214

    214 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s ● Replacing the system board: – Phillips PH2 / (+ ) No. 2 screw driver ● Replacing the system board: – Magnifying glass (for inspecting socket cover springs) If a TPM module is ins talled: – Bit screw driver – TPM bit insert* – thin slotted screw driver ( 2 x 0 ...

  • Fujitsu MX130 S2 - page 215

    MX130 S2 Upgrade and Maintenance Manual 215 System board and comp onents 12.3. 3 Removi ng the sy stem boa rd Ê Remove all cables from the system board. Ê Remove the following component s from the system board as shown in the related sections: – Memory modules: refer to section "Removing memory modules" on page 184 I Ensure to take no ...

  • Fujitsu MX130 S2 - page 216

    216 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s Ê Remove eight screws from the system board (see circles) beginni ng with the two centering bolt s (C). Figure 136: Detaching t he system board (B) V CAUTION! – Do not lift or handle the s y stem board by any of it s heat sinks! – Ensure not to damage the EMI springs to ...

  • Fujitsu MX130 S2 - page 217

    MX130 S2 Upgrade and Maintenance Manual 217 System board and comp onents Figure 137: Removing the heat sink co unter plate Ê Remove heat sink counter plate from the bottom side of the system board. ...

  • Fujitsu MX130 S2 - page 218

    218 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s 12.3.4 Inst alling the system board 12.3.4.1 Mounting the system board Figure 138: Inserting t he heat sink count er plate Ê Insert the heat sink counter plate from the bottom to the system board. The bolts must com e through the system board (see circles). Ê Install the p ...

  • Fujitsu MX130 S2 - page 219

    MX130 S2 Upgrade and Maintenance Manual 219 System board and comp onents Figure 139: Installing the sy stem board (A) Ê Hold the new system board by the memory module ejectors and a PCI slot. V CAUTION! – Do not lift or hand le the system board by any of its heat s inks! – Ensure not to damage the EMI springs to comply with applicable EMC regu ...

  • Fujitsu MX130 S2 - page 220

    220 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s Figure 140: Installing t he sys tem board (B) Ê Secure the system board with eight screws (M3 x 4.5 mm, standard C67 screw) (see circles) beginning with the two centering bolts (C). I Screw torque: 0.6 Nm (not applicable for the Japanese market) Ê V erify the settings on t ...

  • Fujitsu MX130 S2 - page 221

    MX130 S2 Upgrade and Maintenance Manual 221 System board and comp onents 12.3.5 Concluding step s Ê Reconnect all cables to the system board. For a complete cabling overview , please refer to section "Cabling" on page 235 . Ê Reinstall all remaining system board component s as shown in the related sections: – Memory modules: refer to ...

  • Fujitsu MX130 S2 - page 222

    222 Upgrade and Maintenanc e Manual MX130 S2 System board and compo nent s ...

  • Fujitsu MX130 S2 - page 223

    MX130 S2 Upgrade and Maintenance Manual 223 13 Front p anel and front USB Safety notes V CAUTION! ● When inserting the front panel module i nto the ser ver , ens ure not to pinch or strain any connected cables. ● Circuit boards and soldered parts of internal options are exposed and can be damaged by static electricity . Always discharge static ...

  • Fujitsu MX130 S2 - page 224

    224 Upgrade and Maintenanc e Manual MX130 S2 Front panel and front US B 13.1 Replacing the front p anel ind icators The On/Off button and the HDD activity LED are part of the front panel module. 13.1.1 Required tools ● Preliminary and concludi ng steps: tool-less ● Replacing the front p anel module: tool-less 13.1.2 Preliminary step s Ê Follow ...

  • Fujitsu MX130 S2 - page 225

    MX130 S2 Upgrade and Maintenance Manual 225 Front panel an d front USB 13.1.3 Removing the On/Off button Figure 141: Removing the On/Off but t on Ê Press the two retaining clip s together and push the On/Off button bac kwards in the chassis. I Note the orientation of the On/Of f button. If it is installed in the other direction, it does not work p ...

  • Fujitsu MX130 S2 - page 226

    226 Upgrade and Maintenanc e Manual MX130 S2 Front panel and front US B 13.1.4 Removing the HDD ac tivity LED Figure 142: Removing the HDD activity LED Ê Push apart the two latches (1) and pull the LED to the di r ection of the arrow (2). / 0 / ...

  • Fujitsu MX130 S2 - page 227

    MX130 S2 Upgrade and Maintenance Manual 227 Front panel an d front USB 13.1.5 Removing the cable for On/Off button and HDD acti vity LED Figure 143: Disconnecting f ront panel cable Ê Remove the cable from the cable holder(1). Ê Disconnect the cable from system board connector Front panel (2). / 0 ...

  • Fujitsu MX130 S2 - page 228

    228 Upgrade and Maintenanc e Manual MX130 S2 Front panel and front US B 13.1.6 Installing the On/Off button and the HDD activity LED Figure 144: Instal ling the On/Off bu tton and HDD activity LE D Ê Insert the HDD activity LED in the di rection shown until it snaps in place (1). Ê Insert the On/Off button i n the direc tion shown until it snaps ...

  • Fujitsu MX130 S2 - page 229

    MX130 S2 Upgrade and Maintenance Manual 229 Front panel an d front USB 13.2 Replacing the front USB board 13.2.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Replacing the front panel module: – Phillip s PH2 / (+) No. 2 screw driver 13.2.2 Preliminary step s Ê Follow all procedures described i n section "Opening the ...

  • Fujitsu MX130 S2 - page 230

    230 Upgrade and Maintenanc e Manual MX130 S2 Front panel and front US B 13.2.3 Removing the defective front USB board Figure 145: Disconnecting the USB front cable, removing the front U SB board Ê Disconnect the front USB cable from the front USB board (1). Ê Remove the two screws of the front USB board (2). Ê Remove the front USB board (3). 0 0 ...

  • Fujitsu MX130 S2 - page 231

    MX130 S2 Upgrade and Maintenance Manual 231 Front panel an d front USB 13.2.4 Inst alling the new front USB board Figure 146: Installing the front USB board Ê Insert the new front USB board. ...

  • Fujitsu MX130 S2 - page 232

    232 Upgrade and Maintenanc e Manual MX130 S2 Front panel and front US B Figure 147: Connecting the USB front c able Ê Secure the new front USB board with two screws (1) Ê Connect the front USB cable to the front USB board (2). 13.2.5 Concluding steps Ê Close the front cage as described in section "Closing the front c age" on page 53 . ...

  • Fujitsu MX130 S2 - page 233

    MX130 S2 Upgrade and Maintenance Manual 233 14 Cables Safety notes V CAUTION! ● Always hold cables by their connectors when disconnecting them. Never pull on the cable to disconnect cables. ● Ensure that none of the cables are scraped, strained or otherwise damaged while replacing system component s. ● Immediately replace cables with damaged ...

  • Fujitsu MX130 S2 - page 234

    234 Upgrade and Maintenanc e Manual MX130 S2 Cables 14.1 Cabling overview 14.1.1 Overview of used cables # Nam e Numb er Rout ing 1 Front panel connector cable T26139-Y4001- V21 1 from front LEDs to system board 2 Front USB cable T26139-Y4018-V1 from front USB board to connector USB-FRONT 1/2 3 Power cable T26139-Y4012- V21 1 from all drives to sys ...

  • Fujitsu MX130 S2 - page 235

    MX130 S2 Upgrade and Maintenance Manual 235 Cables 14.2 Cabling 14.2.1 Power cabling St andard configu ration Figure 148: Power cabling Battery PCI SA TA 3+4 SA TA 5+6 Power Supply PCI-E x16 PCI-E x4 PCI-Ex1 Northbridge AM3/AM3+ CPU Southbridge FAN2 FAN1 Super I/O TPM USB 5+6 / Dash Intrusion USB 3+4 USB 1+2 SA TA Power Frontpanel Audio PS2 COM DVI ...

  • Fujitsu MX130 S2 - page 236

    236 Upgrade and Maintenanc e Manual MX130 S2 Cables Configuratio n with RDX Figure 149: Power cabling - RDX drive Battery PCI SA TA 3+4 SA TA 5+6 Power Supply PCI-E x16 PCI-E x4 PCI-Ex1 Northbridge AM3/AM3+ CPU Southbridge FAN2 FAN1 Super I/O TPM USB 5+6 / Dash Intrusion USB 3+4 USB 1+2 SA TA Power Frontpanel Audio PS2 COM DVI-I USB 1 1+12 USB 9+10 ...

  • Fujitsu MX130 S2 - page 237

    MX130 S2 Upgrade and Maintenance Manual 237 Cables 14.2.2 Dat a cabling Dat a cabling fixed positions Figure 150: Data cabling for RDX, eSat a and Dash LAN Battery PCI SA TA 3+4 SA TA 5+6 Power Supply PCI-E x16 PCI-E x4 PCI-Ex1 Northbridge AM3/AM3+ CPU Southbridge FAN2 FAN1 Super I/O TPM USB 5+6 / Dash Intrusion USB 3+4 USB 1+2 SA TA Power Frontpan ...

  • Fujitsu MX130 S2 - page 238

    238 Upgrade and Maintenanc e Manual MX130 S2 Cables Dat a cabling variable positions d epending on the d rive configuration Figure 151: Data cabling with slim ODD via chassis- adapter SA T A- Port HDD1 HDD2 HDD3 HDD 4 slim ODD slim ODD HH ODD T26139- Y4028- V153 T26139- Y4028- V153 T26139- Y4028- V153 T26139- Y4028- V153 T26139- Y4028- V201 T26139- ...

  • Fujitsu MX130 S2 - page 239

    MX130 S2 Upgrade and Maintenance Manual 239 Cables 14.3 Replacing the power cable Figure 152: Power cable T26139-Y4012-V21 1 14.3.1 Required tools ● Preliminary and concludi ng step s: tool-less ● Replacing the power cable: tool-less 14.3.2 Preliminary step s Before replacing the power cable, perform the following step s: Ê Follow all procedur ...

  • Fujitsu MX130 S2 - page 240

    240 Upgrade and Maintenanc e Manual MX130 S2 Cables 14.3.3 Removing the power cable Figure 153: Detaching t he power cable Ê While pressing the release latch on the connector (1), disconnect the power cable from the POWER SA T A connector on the system board (2). Ê Remove the power cable T26139-Y4012-V2 1 1 from the five cable clamps (see circ le ...

  • Fujitsu MX130 S2 - page 241

    MX130 S2 Upgrade and Maintenance Manual 241 Cables Figure 154: Disconnecting t he power cable from installed drives Ê Disconnect all power cable connectors from the insta lled drives (1). It depends on your configuration which drives are installed. For detail s refer to section "HDDs and accessible drives" on page 79 . Ê Disconnect the ...

  • Fujitsu MX130 S2 - page 242

    242 Upgrade and Maintenanc e Manual MX130 S2 Cables 14.3.4 Inst alling the power cable Figure 155: Connecting the power cable to t he sys tem board Ê Connect the new power cable to system board connector POW ER SA T A (1 ). Ê Run the power cable through the five cable clamps (see circles). / ...

  • Fujitsu MX130 S2 - page 243

    MX130 S2 Upgrade and Maintenance Manual 243 Cables Figure 156: Connecting th e power cable Ê Connect all power cable connectors to the instal led drives (1). It depends on your configuration which drives are installed. For detail s refer to section "HDDs and accessible drives" on page 79 . Ê Connect the power cable connectors P5 and P6 ...

  • Fujitsu MX130 S2 - page 244

    244 Upgrade and Maintenanc e Manual MX130 S2 Cables ...

  • Fujitsu MX130 S2 - page 245

    MX130 S2 Upgrade and Maintenance Manual 245 15 Append ix 15.1 Mechanical overview 15.1.1 Server front Figure 157: PRI MERGY MX130 S 2 front Pos. Component 1 5.25-inch chassis bay 2 slimline ODD chassis bay 3 HDD activity indicator 4 Power-on indicator and On / Off button 5 Front USB connectors / 1 0 2 3 3 ...

  • Fujitsu MX130 S2 - page 246

    246 Upgrade and Maintenanc e Manual MX130 S2 Appe ndix 15.1.2 Server re ar Figure 158: PRIMERG Y MX130 S2 rear Pos. Comp onent 1 Main power 2 PS2 connector (for mouse) 3 Serial connector (COM1) 4 S tandard LAN connector 5 Audio connectors (optional for specific market s ) 6 USB connectors 1-6 7 Vi deo c onnector (DVI-I) 8 PS2 connector (for keyboar ...

  • Fujitsu MX130 S2 - page 247

    MX130 S2 Upgrade and Maintenance Manual 247 Appendix 15.1.3 Server interi or Figure 159: PRIMER GY MX130 S2 interior Pos. Component 1 System board D3090 2 S tandard PSU 3 ON/OFF button, HDD activity indicator 4 Front USB 5 Drive ba ys 6S y s t e m f a n 7 HDD drive bay 8 CMOS battery 9 TPM board 10 Exp ansion card slots 1 1 Processor / CPU heat sin ...

  • Fujitsu MX130 S2 - page 248

    248 Upgrade and Maintenanc e Manual MX130 S2 Appe ndix 15.2 Configuration t a bles 15.2.1 Mounting order for HDDs Please refer to chapter "HDDs and accessible drives" on page 79 . 15.2.2 Memory board configuration Please refer to chapter "Main memory" on page 179 . 15.2.3 Exp ansion card configuration t able Please refer to chap ...

  • Fujitsu MX130 S2 - page 249

    MX130 S2 Upgrade and Maintenance Manual 249 Appendix 15.3 Connectors and indicators 15.3.1 Conn ectors and indi cators on the system board 15.3.1.1 Onboard conn ectors Figure 160: Internal con nectors of the system board D3090 No. Print Description 1 POWER12V A TX power supply connector 2 POWER SA T A Power distribution for HDDs and accessible driv ...

  • Fujitsu MX130 S2 - page 250

    250 Upgrade and Maintenanc e Manual MX130 S2 Appe ndix 15.3.1.2 Onboard settings Figure 161: Jumper 9 USB-FRONT 3/4 USB connector for accessible backup drive 10 Dash USB 5/6 USB connector for Dash LAN cable Setting Description Default Password skip disabled and recovery BIOS disabled. RCV Recovery BIOS enabled. When the recovery BIOS is applied on ...

  • Fujitsu MX130 S2 - page 251

    MX130 S2 Upgrade and Maintenance Manual 251 Appendix 15.3.1.3 I/O panel connectors Figure 162: Connect or panel on the rear side 1 PS2 connector (for mouse) 2 Serial connector (COM1) 3 S tandard LA N connector 4 Audio connectors (optional for specific markets) 5 6 USB connectors 6 Video connector (DVI-I) 7 PS2 connector (for k eyboard) 1 0 / 3 4 2 ...

  • Fujitsu MX130 S2 - page 252

    252 Upgrade and Maintenanc e Manual MX130 S2 Appe ndix 15.3.1.4 I/O panel indicators Figure 163: Indicators on the connector panel: LAN indicators I Note on the onb oard LAN controller The system board is equipped with a Gigabit Ethernet Controller that supports transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s. Indicator St atus Description 1 L ...

  • Fujitsu MX130 S2 - page 253

    MX130 S2 Upgrade and Maintenance Manual 253 Appendix 15.3.2 Conn ectors and indi cators on the front p anel Figure 164: Front s ide (indicators and cont rols) St atus indicators 1 HDD activity indicator 3 2 USB connectors 2 On/Off button - Power-on indicator Pos. Indicator St atus Descript ion 1 HDD activity indicator green flashing data ac cess in ...

  • Fujitsu MX130 S2 - page 254

    254 Upgrade and Maintenanc e Manual MX130 S2 Appe ndix Buttons 15.4 Minimum sta rtup co nfiguratio n If the server does not start up or other problems occur , it may be necessary to take the s ystem down to its most bas ic configuration in order to isolate the defective component. The minimum st artup configuration consist s of the following compon ...

  • Fujitsu MX130 S2 - page 255

    MX130 S2 Upgrade and Maintenance Manual 255 Appendix Ê Follow all procedures described i n section "Opening the server" on page 48 . Ê T ake the system down to its minimum st artup configuration. Ê Connect a keyboard, mouse and display to the server . Ê Follow all procedures desc ribed in section "Closing the server" on p ag ...

  • Fujitsu MX130 S2 - page 256

    256 Upgrade and Maintenanc e Manual MX130 S2 Appe ndix ...

Fabbricante Fujitsu Categoria Server

I documenti che otteniamo dal fabbricante del dispositivoFujitsu MX130 S2 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Fujitsu
- manuali per l’uso MX130 S2
- schede prodotto Fujitsu
- opuscoli
- o etichette energetiche Fujitsu MX130 S2
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Fujitsu MX130 S2.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Fujitsu MX130 S2, manuali di manutenzione, brevi manuali o manuali utente Fujitsu MX130 S2. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Fujitsu MX130 S2.

Manuali per l’uso simili

Manuale completo del dispositivo Fujitsu MX130 S2, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Fujitsu MX130 S2 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Fujitsu MX130 S2.

Il manuale per l’uso completo Fujitsu, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Fujitsu MX130 S2 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Fujitsu MX130 S2, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Fujitsu MX130 S2 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Fujitsu MX130 S2 - che ci dovrebbe aiutare nei primi passi durante l'uso Fujitsu MX130 S2
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Fujitsu MX130 S2
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Fujitsu MX130 S2 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Fujitsu MX130 S2?

Utilizza il modulo sottostante

Se non hai risolto il problema con Fujitsu MX130 S2 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Fujitsu MX130 S2 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)