Manuale per l’uso Lenovo 4264

86 pagine 11.93 mb
Scarica

Vai alla pagina of 86

Summary
  • Lenovo 4264 - page 1

    ThinkStation User Guide Machine T ypes: 4262, 4263, 4264, 4265, 4266, 4269, 4271, and 4272 ...

  • Lenovo 4264 - page 2

    Note: Before using this information and the product it supports, be sure to r ead and understand the ThinkStation Safety and W arranty Guide and Appendix B “Notices” on page 73. Third Edition (December 2011) © Copyright Lenovo 2010, 2011. LIMITED AND RES TRICTED RIGHTS NO TICE: If data or softwar e is delivered pursuant a Gener al Services Adm ...

  • Lenovo 4264 - page 3

    Contents Important safety information . . . . . iii Chapter 1. P roduct overview . . . . . . 1 F eatures . . . . . . . . . . . . . . . . . . 1 Specications . . . . . . . . . . . . . . . . 3 Software overview . . . . . . . . . . . . . . 4 Software provided with your Windows operating syst em . . . . . . . . . . . . . 4 Locating computer controls, ...

  • Lenovo 4264 - page 4

    Updating (ashing) the BIOS from a disc . . . . 57 Updating (ashing) the BIOS from your oper ating system . . . . . . . . . . . . . . . . . . 58 Recovering from a POS T/BIOS update failure . . 58 Chapter 7. T roubleshooting and diagnostic programs . . . . . . . . . 61 Basic troubleshooting . . . . . . . . . . . . 61 Diagnostic progr ams . . . ...

  • Lenovo 4264 - page 5

    Important safety information CA UTION: Before using this manual, be sur e to read and understand all the related safety information for this product. Refer t o the ThinkS tation Safety and W arranty Guide that you received with this pr oduct for the latest safety information. Reading and understanding this safety information reduces the risk of per ...

  • Lenovo 4264 - page 6

    iv ThinkStation User Guide ...

  • Lenovo 4264 - page 7

    Chapter 1. Product overview This chapter provides information about the computer featur es, specications, preinstalled softwar e progr ams, and connector and part locations. This chapter contains the following topics: • “Featur es” on page 1 : This section pr ovides information about the computer featur es. • “Specications” on pag ...

  • Lenovo 4264 - page 8

    Audio subsystem • Integr ated high-denition (HD) audio • Microphone connector and headphone connector on the front panel • Eight audio connectors on the rear panel – Audio line-in connector – Audio line-out front speaker connector – Audio line-out rear speaker connector – Audio line-out side speaker connector – Audio line-out sub ...

  • Lenovo 4264 - page 9

    • One PCI Express x4 card slot (x16 mechanical) • Three hard disk drives • T wo PCI card slots • T wo PCI Expr ess x16 car d slots P ower supply • 800-watt auto-sensing power supply Security featur es • Cover pr esence switch (also called intrusion switch) (available in some models) • Enabling or disabling SA T A devices • Enabling ...

  • Lenovo 4264 - page 10

    Dimensions Width: 130 mm (5.12 inches) Height: 427 mm (16.81 inches) Depth: 444 mm (17.48 inches) Weight Maximum conguration: 18.5 kg (40.8 lbs) Environment • Air temper ature: Operating: 10°C to 35°C (50°F t o 95°F) Stor age: -10°C to 60°C (14°F to 140°F) without package • Humidity: Operating: 10% t o 80% (10% per hour , non-condens ...

  • Lenovo 4264 - page 11

    Lenovo ThinkV antage T ools The L enovo ThinkV antage ® T ools pr ogram guides you t o a host of information sour ces and pr ovides easy access to various tools t o help you work mor e easily and secur ely . F or mor e information, see “L enovo ThinkV antage T ools” on page 65 . Note: The Lenovo ThinkV antage T ools progr am is only available ...

  • Lenovo 4264 - page 12

    See “Online Books folder” on page 65 for more information about accessing and viewing the publications. Antivirus software Y our comput er comes with antivirus software that you can use t o detect and eliminate viruses. Lenovo provides a full version of antivirus softwar e on your comput er with a fr ee 30-day subscription. Aft er 30 days, you ...

  • Lenovo 4264 - page 13

    Locating connectors on the rear of your computer Figure 2 “Rear connect or locations” on page 7 shows the locations of the connectors on the r ear of your computer . Some connectors on the r ear of your comput er ar e color -coded to help you det ermine wher e t o connect the cables on your comput er . Figure 2. Rear connect or locations 1 eSA ...

  • Lenovo 4264 - page 14

    Connector Description Audio line-in connector Used to receive audio signals from an ext ernal audio device, such as a ster eo system. When you attach an ext ernal audio device, a cable is connected between the audio line-out connector of the device and the audio line-in connect or of the computer . Audio line-out connector (fr ont speaker connect o ...

  • Lenovo 4264 - page 15

    Figure 3. Component locations 1 Memory modules 7 Har d disk drives (3) 2 Heat sink and fan assembly 2 8 P ower supply assembly 3 Optical drive bracket 9 PCI car d 4 Optical drive 10 Heat sink and fan assembly 1 5 F ront fan assembly br acket 11 Rear fan assemblies (2) 6 Har d disk drive bay Locating parts and connectors on the syst em board Note: Y ...

  • Lenovo 4264 - page 16

    33 32 31 34 35 Figure 4. S ystem board part and connect or locations 1 CPU 1 memory slots (6) 19 Clear Complementary Metal Oxide Semiconduct or (CMOS) /Recovery jumper 2 CPU 1 memory fan connector 20 Thermal sensor connector 3 CPU 2 12 V power connect or 21 Cover presence switch connector 4 Micr oprocessor 2 22 P ersonal Syst em/2 (PS/2) keyboar d ...

  • Lenovo 4264 - page 17

    Figure 5 “Syst em board part and connector locations” on page 11 shows the locations of the parts and connectors on the other type of syst em board. Figure 5. S ystem board part and connect or locations 1 CPU 1 memory slots (3) 18 Clear Complementary Metal Oxide Semiconduct or (CMOS) /Recovery jumper 2 CPU 1 memory fan connector 19 Thermal sens ...

  • Lenovo 4264 - page 18

    16 SA T A connect ors (4) 33 Micr oprocessor 1 17 Battery 12 ThinkStation User Guide ...

  • Lenovo 4264 - page 19

    Chapter 2. Installing or r eplacing har dware This chapter pr ovides instructions on how to install or r eplace har dware for your computer . This chapter contains the following topics: • “Installing or r eplacing hardwar e” on page 13 • “Obtaining device drivers” on page 38 • “Basic security featur es” on page 38 Installing or re ...

  • Lenovo 4264 - page 20

    2. Use the k eys that came with your computer t o unlock the keylock 1 in the comput er cover . Pr ess the computer cover -release button 2 and then remove the comput er cover . Place the computer cover on a at surface. Figure 6. Removing the computer cover Removing and reinstalling the front bez el Attention: Do not open your computer or attemp ...

  • Lenovo 4264 - page 21

    3. Remove the front bez el by releasing the two plastic tabs on the left side and pivoting the fr ont bez el outward. Figure 7. Removing the front bez el 4. Lay the front bez el on a at surface. 5. T o r einstall the front bez el, align the other three plastic tabs on the right side of the fr ont bezel with the corresponding holes in the chassis ...

  • Lenovo 4264 - page 22

    5. Pr ess the two tabs 1 that secure the PCI car d holder 2 inward, and then pivot the car d holder to remove it from the chassis. Figure 8. Removing the PCI card holder 6. T o r einstall the PCI card holder int o the chassis, insert the two tabs 1 int o the corr esponding holes in the chassis, and then pivot the PCI car d holder downwar d until th ...

  • Lenovo 4264 - page 23

    Figure 9. Installing the PCI card holder Installing or replacing a memory module Attention: Do not open your computer or attempt any r epair befor e reading and understanding the “Important safety information” in the ThinkStation Safety and Warranty Guide that came with your computer . T o obtain a copy of the ThinkStation Safety and Warranty G ...

  • Lenovo 4264 - page 24

    • If your comput er has only one CPU installed, be sur e to install memory modules only in the memory slots adjacent t o that CPU . • If your computer has two CPUs installed, install equal numbers of memory modules in both sets of CPU DIMM slots for maximum performance. T o install or r eplace a memory module, do the following: 1. Remove all me ...

  • Lenovo 4264 - page 25

    Figure 11. Removing the memory fan duct 7. Open the r etaining clips as shown. Figure 12. Opening the retaining clips If you ar e r eplacing an old memory module, open the retaining clips and gently pull the memory module out of the memory slot. Figure 13. Removing a memory module Notes: a. If your computer has 12 memory slots on the syst em boar d ...

  • Lenovo 4264 - page 26

    b. If your comput er has six memory slots on the syst em board, you might have t o use more for ce to remove the memory module installed in memory slot 1 . 20 ThinkStation User Guide ...

  • Lenovo 4264 - page 27

    8. P osition the new memory module over the memory slot. Make sur e that the notch 1 on the memory module aligns corr ectly with the key 2 in the memory slot. Push the memory module straight down int o the slot until the r etaining clips close. Figure 14. Installing a memory module 9. T o install the memory fan duct, engage the r ear of the duct wi ...

  • Lenovo 4264 - page 28

    • T wo PCI card slots • One PCI Expr ess x1 car d slot • One PCI Express x4 card slot (x16 mechanical) • T wo PCI Expr ess x16 car d slots T o install or replace a PCI card, do the following: 1. Remove all media fr om the drives and turn off all attached devices and the comput er . Then, disconnect all power cor ds fr om electrical outlets ...

  • Lenovo 4264 - page 29

    5. Remove the new PCI car d from its static-pr otective package. 6. Install the new PCI car d into the appropriat e slot on the syst em boar d. See “Locating parts and connectors on the syst em boar d” on page 9. Figure 17. Installing a new PCI card 7. Reinstall the PCI car d holder into the chassis. See “Removing and r einstalling the PCI ca ...

  • Lenovo 4264 - page 30

    6. T o install a new har d disk drive int o the br acket, e x the sides of the br acket properly and align pin 1 , pin 2 , pin 3 , and pin 4 on the br acket with the corr esponding holes in the har d disk drive. Do not touch the cir cuit board 5 on the hard disk drive. Figure 18. Installing a new hard disk drive int o the bracket 7. Connect one ...

  • Lenovo 4264 - page 31

    8. Slide the new har d disk drive with the br acket and the signal cable into the har d disk drive bay until it snaps into position. Figure 21. Installing a new hard disk drive 9. Locat e one of the e xtra ve-wir e power cables and connect it t o the new har d disk drive. Chapter 2 . Installing or r eplacing hardwar e 25 ...

  • Lenovo 4264 - page 32

    Note: Y ou might need t o disconnect power cables for other har d disk drives installed in your comput er and then r otate the air ow wall outwar d for easier access t o the r ear of the new har d disk drive. Figure 22. Rotating the air ow wall 10. Connect the other end of the signal cable to one of the available har d disk drive connectors o ...

  • Lenovo 4264 - page 33

    2. Remove the comput er cover . See “Removing the computer cover” on page 13. 3. Remove the fr ont be zel. See “Removing and r einstalling the fr ont bez el” on page 14. 4. Locat e the hard disk drive that you want t o replace. 5. Disconnect the signal cable and the power cable fr om the r ear of the har d disk drive. P ress the two tabs of ...

  • Lenovo 4264 - page 34

    1. Remove all media fr om the drives and turn off all attached devices and the comput er . Then, disconnect all power cor ds fr om electrical outlets and disconnect all cables that ar e connected t o the computer . 2. Remove the comput er cover . See “Removing the computer cover” on page 13. 3. Remove the fr ont be zel. See “Removing and r ei ...

  • Lenovo 4264 - page 35

    a. Connect the signal cable to the r ear of the new optical drive. Note: If you want to r eplace the signal cable, remove the PCI car d holder . See “Removing and reinstalling the PCI card holder” on page 15 . Then, disconnect the old signal cable fr om the system board. Connect one end of the new signal cable to the optical drive and the other ...

  • Lenovo 4264 - page 36

    • If you are replacing heat sink and fan assembly 1, go to step 6. • If you are r eplacing heat sink and fan assembly 2, do the following: a. Remove the optical drive. See “Replacing the optical drive” on page 27. b. Pivot the optical drive br acket as shown in the following illustr ation and then r emove it from the chassis. Go to step 6. ...

  • Lenovo 4264 - page 37

    Figure 28. Removing the heat sink and fan assembly 8. Car efully lift the heat sink and fan assembly off the syst em board. Notes: a. Y ou might have to gently twist the heat sink and fan assembly t o free it from the micr oprocessor . b. Do not touch the thermal grease while handling the heat sink and fan assembly . 9. Remove the plastic cover fro ...

  • Lenovo 4264 - page 38

    14. Reinstall the PCI car d holder . See “Removing and reinstalling the PCI car d holder” on page 15. What to do next: • T o work with another piece of har dware, go to the appr opriate section. • T o complete the installation or replacement, go t o “Completing the parts r eplacement” on page 37. Replacing the front fan assembly Attenti ...

  • Lenovo 4264 - page 39

    6. Pr ess the two tabs 1 that attach the fr ont fan assembly brack et to the chassis t oward each other as shown and then complet ely r emove the fr ont fan assembly br acket fr om the chassis. Figure 29. Removing the front fan assembly brack et Chapter 2 . Installing or r eplacing hardwar e 33 ...

  • Lenovo 4264 - page 40

    7. Insert the two tabs 1 on the new front fan assembly brack et into the corr esponding holes in the chassis, and then pr ess the two tabs thr ough the holes until the brack et is secured in place. Figure 30. Installing the new front fan assembly bracket 8. Connect the fr ont fan assembly cable t o the front fan connector on the syst em boar d. See ...

  • Lenovo 4264 - page 41

    T o replace the rear fan assembly, do the following: 1. Remove all media fr om the drives and turn off all attached devices and the comput er . Then, disconnect all power cor ds fr om electrical outlets and disconnect all cables that ar e connected t o the computer . 2. Remove the comput er cover . See “Removing the computer cover” on page 13. ...

  • Lenovo 4264 - page 42

    9. Pull on the tips of the rubber mounts until the r ear fan assembly is secur ed in place. Figure 32. Installing the rear fan assembly 10. Connect the r ear fan assembly cable to the appropriat e r ear fan connector on the system board. See “Locating parts and connectors on the syst em board” on page 9. What to do next: • T o work with anoth ...

  • Lenovo 4264 - page 43

    4. Connect a new keyboard or mouse to one of the USB connectors on the computer . Depending on where you want to connect the new keyboar d or mouse, see “L ocating controls and connect ors on the front of your computer” on page 6 or “L ocating connectors on the rear of your comput er ” on page 7. Figure 33. Connecting the USB keyboard or mo ...

  • Lenovo 4264 - page 44

    5. P osition the computer cover on the chassis so that the rail guides on the bottom of the comput er cover engage with the rails on the chassis. Then, close the computer cover to engage the cover -release button. Figure 34. Reinstalling the computer cover 6. Use the keys that came with your computer t o lock the keylock in the computer cover . See ...

  • Lenovo 4264 - page 45

    Locking devices Note: Make sur e that any security cables you installed do not interfere with other computer cables. This section describes the differ ent kinds of locking devices for your computer . Figure 35. L ocking devices 1 P adlock hasp 2 Integr ated cable lock (K ensington lock) 3 Keylock An optional padlock with a 5 mm (0.20 inch) shackle ...

  • Lenovo 4264 - page 46

    P assword prot ection T o deter unauthorized use of your comput er , you can use the Setup Utility progr am to set a passwor d. When you turn on your computer , you are pr ompted t o type the passwor d. The computer cannot be used until a valid password is typed in. Refer to Chapter 4 “Using the Setup Utility pr ogram” on page 49 for mor e info ...

  • Lenovo 4264 - page 47

    Chapter 3. Recover y information This chapt er pr ovides information about the recovery solutions provided by L enovo. This chapter contains the following topics: • “Creating and using r ecovery media” on page 41 • “P erforming backup and r ecovery operations” on page 42 • “Using the Rescue and Recovery workspace” on page 44 • ? ...

  • Lenovo 4264 - page 48

    • On the Windows 7 oper ating syst em, you can use r ecovery media t o r estore the comput er t o the fact ory default settings only . Y ou can use recovery media t o put the comput er in an oper ational state after all other methods of recovery have failed. Attention: When you use recovery media to r estore the comput er to the fact ory default ...

  • Lenovo 4264 - page 49

    • On r ecordable discs (a r ecordable optical drive is r equired for this option) After you have back ed up the contents on the har d disk drive, you can restor e the complete contents of the hard disk drive, rest ore only the selected les, or rest ore only the Windows oper ating syst em and applications. P erforming a backup oper ation This s ...

  • Lenovo 4264 - page 50

    Using the Rescue and Recovery workspace The Rescue and Recovery workspace r esides in a prot ected, hidden area of your har d disk drive that operat es independently fr om the Windows oper ating syst em. This enables you to perform r ecovery operations even if you cannot start the Windows oper ating system. Y ou can perform the following r ecovery ...

  • Lenovo 4264 - page 51

    Creating and using a r escue medium With a r escue medium, such as a disc or a USB har d disk drive, you can r ecover the computer from failur es that prevent you fr om gaining access t o the Rescue and Recovery workspace on your har d disk drive. Notes: 1. The r ecovery operations you can perform using a r escue medium vary depending on the oper a ...

  • Lenovo 4264 - page 52

    • If you have cr eated a r escue medium using the secondary internal hard disk drive, set the secondary internal har d disk drive as the rst boot device in the startup device sequence t o start the rescue medium. See “Selecting a startup device” on page 51. Note: The secondary internal har d disk drive is only available in some computer mo ...

  • Lenovo 4264 - page 53

    information about tempor arily or permanently changing the startup device sequence. F or mor e information about the Setup Utility progr am, see Chapter 4 “Using the Setup Utility pr ogram” on page 49. It is important t o cr eate a r escue medium and a set of recovery media as early as possible and stor e them in a safe place for future use. Ch ...

  • Lenovo 4264 - page 54

    48 ThinkStation User Guide ...

  • Lenovo 4264 - page 55

    Chapter 4. Using the Setup Utility progr am Y ou can use the Setup Utility pr ogram t o view and change the congur ation settings of your computer , regar dless of which oper ating syst em you are using. However , the oper ating system settings might override any similar settings in the Setup Utility pr ogram. This chapter pr ovides information ...

  • Lenovo 4264 - page 56

    P assword consider ations A passwor d can be any combination of up t o 12 (1 to 12) alphabetic and numeric charact ers. F or security reasons, it is r ecommended to use a str ong passwor d that cannot be easily compr omised. T o set a str ong password, use the following guidelines: Note: The Setup Utility pr ogram passwords ar e not case sensitive. ...

  • Lenovo 4264 - page 57

    USB Support Use this option to enable or disable USB connectors. ICH SA T A When this feature is set t o Disabled , any optical drives or eSA T A devices are disabled and will not be displayed in the system conguration. Marvell SA T A/SAS controller When this featur e is set to Disabled , all internal har d disk drives ar e disabled and will not ...

  • Lenovo 4264 - page 58

    3. Select the startup devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error Startup Sequence. 4. Pr ess Esc to return t o the Setup Utility progr am main menu. Y ou might have to press Esc several times. 5. Pr ess F10 to save the new settings and exit the Setup Utility progr am. Notes: a. If you do not want t o sav ...

  • Lenovo 4264 - page 59

    Chapter 5. Conguring RAID This chapter contains information about installing hard disk drives and conguring Redundant Arr ay of Independent Disks (RAID) for your computer . Notes: 1. The Marvell BIOS setup information in this chapt er only applies t o some comput er models. 2. The information about conguring RAID in this chapter only appli ...

  • Lenovo 4264 - page 60

    Creating RAID volumes This section describes how to use the Intel Matrix Stor age Manager option ROM congur ation utility t o creat e RAID volumes. 1. Pr ess Ctrl+I when pr ompted t o ent er the Intel Matrix Stor age Manager option ROM conguration utility . 2. Use the up and down arrow keys t o select Create RAID V olume and press Ent er . 3. ...

  • Lenovo 4264 - page 61

    Installing SA T A or SAS hard disk drives Y our computer must have the minimum number of SA T A or SAS har d disk drives installed for the supported level of RAID below: • RAID Level 0 – Striped disk arr ay – T wo hard disk drives minimum – Better performance without fault toler ance • RAID Level 1 – Mirror ed disk arr ay – T wo hard ...

  • Lenovo 4264 - page 62

    Conguring the Marvell BIOS Setup t o set an optional hot spar e hard disk drive T o congure the Marvell BIOS Setup t o set an optional hot spar e hard disk drive, do the following: 1. T urn on your comput er and pr ess Ctrl+M when prompted t o ent er the Marvell BIOS Setup. 2. On the Marvell BIOS Setup screen, use the arrow keys t o select RA ...

  • Lenovo 4264 - page 63

    Chapter 6. Updating system progr ams This chapt er provides information about updating the POST and BIOS, and how to recover fr om a POS T and BIOS update failur e. This chapter contains the following topics: • “Using system pr ograms” on page 57 • “Updating (ashing) the BIOS fr om a disc” on page 57 • “Updating (ashing) the B ...

  • Lenovo 4264 - page 64

    6. F ollow the instructions on the screen t o complete the update. Aft er the update is completed, remove the disc from the optical drive. Updating (ashing) the BIOS from your oper ating system Note: Because L enovo makes constant impr ovements to its W eb sites, the W eb page contents ar e subject to change without notice, including the cont en ...

  • Lenovo 4264 - page 65

    16. T urn on the computer and r emove the disc fr om the optical drive. Chapter 6 . Updating system progr ams 59 ...

  • Lenovo 4264 - page 66

    60 ThinkStation User Guide ...

  • Lenovo 4264 - page 67

    Chapter 7. T roubleshooting and diagnostic pr ograms This chapter pr ovides information about some basic troubleshooting and diagnostic pr ograms. If your computer pr oblem is not described in this chapt er , see Chapt er 8 “Getting information, help, and service” on page 65 for additional tr oubleshooting resources. This chapter contains the f ...

  • Lenovo 4264 - page 68

    Diagnostic progr ams Diagnostic pr ograms ar e used t o test har dware components of your computer . Diagnostic pr ograms can also report operating-system-contr olled settings that int erfere with the corr ect oper ation of your system. Depending on the preinstalled oper ating syst em and the date when your comput er was manufactured, Lenovo pr ovi ...

  • Lenovo 4264 - page 69

    • T o run the Lenovo ThinkV antage T oolbo x progr am on the Windows XP oper ating system, click Start ➙ All Progr ams ➙ ThinkV antage ➙ L enovo ThinkV antage T oolbo x . F ollow the instructions on the scr een. F or additional information about running the L enovo ThinkV antage T oolbox pr ogram, r efer to the L enovo ThinkV antage T oolbo ...

  • Lenovo 4264 - page 70

    3. Insert the diagnostic disc into the optical drive. 4. Select the optical drive with the diagnostic disc as the startup device and pr ess Ent er . The diagnostic progr am opens. 5. F ollow the instructions on the screen to run the desired diagnostic test. F or additional help, press the F1 key . 6. Remove the diagnostic disc fr om the optical dri ...

  • Lenovo 4264 - page 71

    Chapter 8. Getting information, help, and ser vice This chapter pr ovides information about help, service, and t echnical assistance for L enovo products. This chapter contains the following topics: • “Information r esources” on page 65 • “Help and service” on page 66 Information resour ces Y ou can use the information in this section t ...

  • Lenovo 4264 - page 72

    The L enovo W elcome pr ogram intr oduces some innovative built-in features of Lenovo to you and guides you through some important setup tasks to help you make the most of your computer . Safety and warr anty The ThinkStation Safety and W arranty Guide that came with your comput er contains information about safety, warr anty, service and support p ...

  • Lenovo 4264 - page 73

    The following services are available during the warr anty period: • Problem determination - T r ained service personnel are available to assist you with det ermining a hardwar e pr oblem and deciding what action is necessary to x the pr oblem. • Hardware repair - If the pr oblem is caused by hardwar e under warr anty, tr ained service person ...

  • Lenovo 4264 - page 74

    http://support.microsoft.com/dir ectory or you can contact the Cust omer Support Cent er . Some fees might apply . Pur chasing additional services During and aft er the warr anty period, you can pur chase additional services, such as support for har dware, operating systems, and application pr ograms; network setup and conguration; upgr aded or ...

  • Lenovo 4264 - page 75

    Appendix A. System memory speed The Int el Xeon micr oprocessor families compatible with this ThinkStation comput er feature an integr ated memory contr oller , which provides the micr oprocessor with dir ect access t o the system memory . Because of this design, the syst em memory speed will be determined by a number of factors, including the micr ...

  • Lenovo 4264 - page 76

    T able 3. DIMM type and speed: PC3-10600R (continued) DIMM size (capacity) Number of DIMMs installed per microprocessor bank Microprocessor model Memory frequency X5650, X5660, X5667, X5670, X5672, X5675 T able 4. DIMM type and speed: PC3-8500R DIMM size (capacity) Number of DIMMs installed per microprocessor bank Microprocessor model Memory freque ...

  • Lenovo 4264 - page 77

    T able 6. DIMM type and speed: PC3-8500U DIMM size (capacity) Number of DIMMs installed per microprocessor bank Microprocessor model Memory frequency Intel Xeon E5502, E5503, E5504, E5506, E5507 800 MHz 1 GB, 2 GB, 4 GB 1 to 6 Intel Xeon E5603, E5606, E5607, E5520, E5530, E5540, E5620, E5630, E5640, E5645, X5647, E5649, X5550, X5560, X5570, X5650, ...

  • Lenovo 4264 - page 78

    T able 8. DIMM type and speed: PC3-8500R DIMM size (capacity) Number of DIMMs installed per microprocessor bank Microprocessor model Memory frequency Intel Xeon E5502, E5503, E5504, E5506, E5507 800 MHz 1 GB, 2 GB, 4 GB 1 to 6 Intel Xeon E5603, E5606, E5607, E5520, E5530, E5540, E5620, E5630, E5640, E5645, E5649, X5647, X5550, X5560, X5570, X5650, ...

  • Lenovo 4264 - page 79

    Appendix B. Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the pr oducts and services curr ently available in your area. Any reference to a L enovo pr oduct, pr ogram, or service is not int ended t o stat e or imply that only ...

  • Lenovo 4264 - page 80

    T elevision output notice The following notice applies to models that have the fact ory-installed t elevision-output featur e. This pr oduct incorpor ates copyright protection technology that is pr otected by method claims of certain U .S. patents and other int ellectual pr operty rights owned by Macr ovision Corpor ation and other rights owners. U ...

  • Lenovo 4264 - page 81

    Inde x A a rescue medium, creating and using 45 Administrat or passwor d 50 advanced settings 52 antivirus software 6 audio line-in connector 8 audio line-out connector 8 audio subsystem 2 B backup and recovery oper ations 42 basic troubleshooting 61 boot-block recovery 58 C changing startup device sequence 51 cleaning an optical mouse 64 computer ...

  • Lenovo 4264 - page 82

    memory module installing, r eplacing 17 system board 17 Microphone connector 8 mouse, r eplacing 36 N notice, television output 74 notices 73 O Online Books folder 65 operations, backup and recovery 42 optical mouse cleaning 64 Optical SPDIF in connector 8 Optical SPDIF out connector 8 P parts replacement, completing 37 password Administrat or pass ...

  • Lenovo 4264 - page 83

    user , passwor d 50 using a rescue medium, cr eating and 45 diagnostic progr ams 66 documentation 66 other services 67 passwords 49 Setup Utility program 49 V video subsystem 1 viewing and changing settings 49 W warranty information 66 Web site, Lenovo 66 workspace, backup and recovery 44 © Copyright Lenovo 2010, 2011 77 ...

  • Lenovo 4264 - page 84

    78 ThinkStation User Guide ...

  • Lenovo 4264 - page 85

    ...

  • Lenovo 4264 - page 86

    Part Number: 89Y7306 (1P) P/N: 89Y7306 *89Y7306* ...

Fabbricante Lenovo Categoria Laptop

I documenti che otteniamo dal fabbricante del dispositivoLenovo 4264 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Lenovo
- manuali per l’uso 4264
- schede prodotto Lenovo
- opuscoli
- o etichette energetiche Lenovo 4264
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Lenovo 4264.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Lenovo 4264, manuali di manutenzione, brevi manuali o manuali utente Lenovo 4264. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Lenovo 4264.

Manuali per l’uso simili

Manuale completo del dispositivo Lenovo 4264, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Lenovo 4264 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Lenovo 4264.

Il manuale per l’uso completo Lenovo, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Lenovo 4264 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Lenovo 4264, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Lenovo 4264 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Lenovo 4264 - che ci dovrebbe aiutare nei primi passi durante l'uso Lenovo 4264
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Lenovo 4264
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Lenovo 4264 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Lenovo 4264?

Utilizza il modulo sottostante

Se non hai risolto il problema con Lenovo 4264 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Lenovo 4264 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)