Italiano dropdown-ico

Manuale per l’uso Seagate 1680

48 pagine 0.2 mb
Scarica

Vai alla pagina of 48

Summary
  • Seagate 1680 - page 1

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Marat ho n 2250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Marat ho n 1680 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ATA In terfac e D rives . . . . . . . . . . . . . . . . . . . . . ...

  • Seagate 1680 - page 2

    ...

  • Seagate 1680 - page 3

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Marat ho n 2250 (S T 9225 5AG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Marat ho n 1680 (S T 9168 5AG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ATA In terfac e D rives . . . . . . ...

  • Seagate 1680 - page 4

     1997 Seagate Technology , I nc. All r ights r eserved Publicat ion Number: 36337-101, Rev. B, March 1997 Seagate, Seagate Technology and the Seagate logo are registered trademarks of Seagate Technology, Inc. Marat hon and SafeRite are trademarks of Seagate Technology. Other product names are registered trademarks or tradem arks of t heir owners ...

  • Seagate 1680 - page 5

    Contents Int rodu c ti on . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Specificat ion summary tabl e . . . . . . . . . . . . . . . . . . . 2 1. 0 Dr ive s peci fi ca tion s . . . . . . . . . . . . . . . . . . . . . . 5 1.1 Formatted c apacit y . . . . . . . . . . . . . . . . . . . . . 5 1.1.1 Default logical geometry . . . . . . . . . ...

  • Seagate 1680 - page 6

    1.11.2 Electromagnetic Compatibili ty . . . . . . . . . . . . 15 1. 11.3 FCC v eri fi ca t ion . . . . . . . . . . . . . . . . . . . . 15 2. 0 Dr ive m oun ting a nd conf igur at i on . . . . . . . . . . . . . . 17 2.1 Handling and static - dis charge precautions . . . . . . . . . 17 2.2 Jumper sett ings . . . . . . . . . . . . . . . . . . . . . . ...

  • Seagate 1680 - page 7

    Fig ur es Figure 1. Typical startup and operation current prof ile. . . . . . . . 9 Figure 2. Connector and m aster/s lav e jumper setup . . . . . . . . 18 Figure 3. Drive mounting dimensions—side and bot tom view. . . . 20 Figure 4. Drive mounting dimensions—end view . . . . . . . . . . 21 Figure 5. ATA Interface connector dimensions . . . . . ...

  • Seagate 1680 - page 8

    vi Marathon 2250 and Marathon 1680 P roduct Manual ...

  • Seagate 1680 - page 9

    In tr od uct ion The Marathon  2250 (ST92255AG) and Marathon 1680 (ST91685AG) provide ver y high storage c apacit y in a smal l, 17- mm hard di sc dri ve. Key Featur es: • Low power consumption • Compact, SFF-8200-compatible form-fact or • High rotational speed for fast internal data transfer • Quiet operation • SafeRite  s hock pr ...

  • Seagate 1680 - page 10

    Spe cification summ ary t able The speci fications li sted i n this table ar e for qui ck refer ence. For details on a specif icati on measurement or def inition, see t he appropriate s ection of t his manual. Drive Specificati on Marathon 2250 Marathon 1680 Guarant eed Mbyte s (1 Mbyt e= 10 6 bytes) 2 ,25 0 1,680 Guarant eed s ector s (LBA mod e) ...

  • Seagate 1680 - page 11

    Drive Specificati on Marathon 2250 Marathon 1680 Power -on to ready (sec typic al) 3.5 Standby to ready (sec t ypical ) 2 Spinup cu rrent (pe ak) 1 .3 a mp s Read/W rit e power and cu rrent (typi ca l) 2.5 wat t s, 0. 5 am ps Seek po wer an d cur ren t (ty pical ) 2.5 wat t s, 0. 5 am ps Idle mod e power and cu rr ent (typi ca l) 1 .2 wa tts, 0. 24 ...

  • Seagate 1680 - page 12

    4 Marathon 2250 and M arathon 1680 Product M anual ...

  • Seagate 1680 - page 13

    1.0 D ri ve specif icatio ns Unless otherwise not ed, all specif ic ati ons are measured under ambient conditions , at 40°C, at sea l evel and nominal power. 1. 1 Fo rm a tt ed ca p acity Marathon 2250 Marathon 1680 Guaranteed K bytes 2,250,209 1,680,634 Guaranteed s ectors (LBA m ode) 4,394,940 3,282,490 Bytes per sector 512 512 Note . DOS system ...

  • Seagate 1680 - page 14

    The Marathon 1680 supports any translation geometry that sati sfies all of t he following c onditions: • Secto rs pe r trac k ≤ 63 • Read/wri te heads ≤ 16 • (Sec tors p er tr ack) × (read/writ e heads) × (cylinders) ≤ 3,282,048 1.2 Phy sica l organi zati on Marathon 2250 Marathon 1680 Read/Writ e heads 10 8 Discs 5 4 1.3 Rec or din g ...

  • Seagate 1680 - page 15

    1.4 Phy sical ch aract eristi cs Marathon 2250 Marat hon 1680 Maximum height (inches) (mm) 0.676 (17.2) 0.676 (17.2) Maximum widt h (inches) (mm) 2.76 (70.1) 2.76 (70.1) Maximum lengt h (inches) (mm) 3. 955 (100.45) 3.955 (100.45) Typical weight (ounces) (gram s) 7.19 (204) 7.05 (200) Note. Maximum length excludes I/O connector pins that may extend ...

  • Seagate 1680 - page 16

    1.6 Sta rt ti mes Power-on t o Ready ( sec) 3.5 t ypical, 7 max Standby to Ready (sec) 2 typical, 3 max Idle to Ready (sec) 0.4 max 1.7 Pow er spe cif icat io ns The dri ve receives DC power (+5V) through pin 41 and pin 42 of the AT interface c onnector. 1.7. 1 Po wer co nsump tion Pow er r equir e ment s f or t he dri ve ar e li ste d in the t abl ...

  • Seagate 1680 - page 17

    1. 7. 1 . 1 T yp i ca l cu rr e n t pro fil e Figure 1 shows a projec ted dri ve startup and operati on current profil e for the Marat hon 2250 and t he Mar athon 1680. Note . The peaks in F igure 1 are t he result of inductive kickback from the commutat ion of the spindle motor and, therefore, do not draw power from the battery. 1.7. 2 Po wer re c ...

  • Seagate 1680 - page 18

    • 100 mV peak-to-peak triangular -wave injected noise at the power connector. The frequency is 100 K Hz to 10 MHz with equivalent resistive l oads. Note . Equivalent resistanc e (9.26 ohms) is calculated by dividing the nominal voltage (5V) by the typical RMS read/ write current ( 0.54 amps). 1.7 .4 Vo lta ge to ler anc e Voltage t olerance (incl ...

  • Seagate 1680 - page 19

    When the st andby timer ex pires, t he drive makes t he transit ion t o the Standby mode. The drive requir es approxi mately 100–200 msec to return to Active mode from I dl e mode. Stan dby mode. T he dri ve ente rs S tandb y mode when the h ost send s a Stand by or St and by I mmed iate c o mmand. If t he st and by c ommand has set the st andb y ...

  • Seagate 1680 - page 20

    1.8 Env ironmen tal to leran ces 1.8 .1 Am bie nt t emperatu re Operating 5° t o 55°C ( 41° t o 131°F) Nonoperating –40° to 70° C (–40° to 158° F) Caution. This dr ive ne eds s uffi cie nt ai rf low so t ha t th e max i mum s urf ace tem per a tu re at the c en te r of th e to p cov er of th e dr iv e does not exce ed 62 de grees C (14 ...

  • Seagate 1680 - page 21

    Note . At power-down, the read/wri te heads aut omati cally move t o the shippi ng zone. The head and slider ass embly park inside of the maximum data cylinder . When power i s applied, the heads re- cali brate to T rack 0. 1.8. 5.1 Op erating shock The Marathon 2250 and the Mar athon 1680 i ncorporate SafeRite shock protection and c an withstand a ...

  • Seagate 1680 - page 22

    1.8. 6.2 Nonop erati ng vib ratio n The following table lists the max i mum nonoperating vibration that the drive may exper ience without incur ring physical damage or degradation in performance. 5–22 Hz 0.2-i nch displacement (peak-to-peak ) 22–400 Hz 4 Gs acceleration (0 to peak) 400–22 Hz 4 Gs acceleration (0 to peak) 22–5 Hz 0.2-i nch d ...

  • Seagate 1680 - page 23

    1.11 Ag enc y cert ificat ion 1.11.1 Safet y cert ificat ion The dri ve is recogni zed in acc ordance with UL 1950 and CSA C22.2 (950-M89) and meets all applicable sections of IEC 380, I EC 435, IEC 950, VDE 0806/08. 81 and E N 60950 as t ested by T UV-Rheinl and, North America. 1.11.2 Electr omag netic Com patib ilit y Hard drives that di splay th ...

  • Seagate 1680 - page 24

    This equipment is designed to provide reasonable protection agains t such int erference in a r esident ial i nstallation. However, there is no guarantee that i nterference wi ll not occur in a part icular ins tallati on. If this equipment does cause interferenc e with radio or t elevision r eception (which can be determined by turning the equipment ...

  • Seagate 1680 - page 25

    2.0 Dr ive m ount ing and co nfigur at ion 2.1 Han dl ing and sta tic -d isch ar ge pr ecau ti on s After unpacking, but before ins tallation, the drive may be exposed to potential handli ng and ESD hazards. You must observe st andard stati c- discharge pr ecautions. A grounded wri st-strap is recommended. Handle the drive only by the s i des of th ...

  • Seagate 1680 - page 26

    Jumper for pi ns A and B Jumper for pi ns C and D Config ur a t io n Off Of f Drive is master; slave dr ive may be detected using DASP– signal. CSEL is ignored. Off On Dri ve is mas ter; s lave driv e i s present. CSEL is ignored. DASP– is i gnored. On Off Dri ve is slave (a m ast er drive should be present also). CSEL is i gnored. On On Differ ...

  • Seagate 1680 - page 27

    2.3 Rem ote L ED co nfigu ratio n The drive indicates activity to the host through the DASP– line (pin 39) on the ATA interface. This line m ay be connected to a dr ive status indicator driving an LED at 5V. The line has a 30 mA nominal current limit ; however, most external LEDs are suffi ciently bright at 15 mA. Because the LED drops 1.7 volts, ...

  • Seagate 1680 - page 28

    A26 thread, 4PLC min A38 full thread center within A27 of position specified A7 A29 A28 A23 A21 ± A22 A6 (to end of HDA) A30 A31 A24 A25 A4 ± A5 (width at mounting holes) A32 thread, 4PLC min A41 full thread center within A33 of position specified S1 (to tips of I/O connector pins) A8 z x y A37 Z4 A37 Z3 A37 Z2 A37 X1 A37 Z1 X2 A37 A40 A39 X Y Z ...

  • Seagate 1680 - page 29

    Mount i ng dim e n s ion speci f ica t io ns Dim. Description inches mm A1 Drive height 0.668 16.97 A2 + tolera nce on drive heig ht 0.008 0.20 A3 – tolera nce on drive heig ht 0.008 0.20 A4 Drive width at m ount i ng ho les 2.750 69.85 A5 + and – t oler anc e on drive width a t m oun ting h oles 0. 0 0 9 0. 2 3 A6 Ma x imu m driv e lengt h (no ...

  • Seagate 1680 - page 30

    Mount i ng dim e n s ion speci f ica t io ns Dim. Description inches mm A1 6 Allowable range, si de-to-side, pi ns w ithin connector 0. 0 0 3 0. 0 8 A17 Pin top-to- bot t om dime nsi on 0.020 0.50 A18 + and – toler anc e on pin top- to -bo ttom dim ensi on 0.002 0.05 A19 Allow able ra nge, t op- to-bo ttom con nector lo cati on 0.020 0.50 A20 All ...

  • Seagate 1680 - page 31

    2.5 ATA inter face c onnec tor The drive connector is a 44-conductor connector with 2 rows of 22 male pins on 0.079-i nch (2 mm) centers (see Figure 4 on page 21 and F igure 5). The mating cable c onnector is a 44-conductor, nonshielded c onnector with 2 rows of 22 f emale contac ts on 0.079-inch (2 mm) center s. The connectors should provide str a ...

  • Seagate 1680 - page 32

    24 Marathon 2250 and Marathon 1680 P roduct Manual ...

  • Seagate 1680 - page 33

    3.0 A TA At tach m ent -3 Inter fac e (AT A-3) The dri ves in thi s manual comply wit h t he ATA-3 Standard, pr oposed by the X3T10 com mittee, a T echnical Commit tee of Accredited St andards Committee X3, of the A meric an National Standards Institut e (ANSI). The X3T10 committ ee has been renamed to X3T13 to refl ect its curr ent standards work ...

  • Seagate 1680 - page 34

    Reset – Ground DD7 DD8 DD6 DD9 DD5 DD10 DD4 DD11 DD3 DD12 DD2 DD13 DD1 DD14 DD0 DD15 Ground (removed) DMARQ Ground DIOW – Ground DIOR – Ground IORDY CSEL DMACK – Ground INTRQ IOCS16 – DA1 PDIAG – DA0 DA2 CS1FX – CS3FX – DASP – Ground Power Power Ground Reserved Pins 28, 34 and 39 are used for master-slave communication (details sh ...

  • Seagate 1680 - page 35

    3.2 ATA Inter face c ommands 3.2. 1 Su ppor ted AT A command s The following table lists supported ATA-standard and Seagate-s pecific drive commands. For a detailed descript ion of t he ATA c ommands, refer to the Draft Pr oposed ATA-3 Standard. See Secti on 3.2.4 on page 33 for details and subcommands used in t he S.M.A.R.T. implementation. Comman ...

  • Seagate 1680 - page 36

    Command n ame Command code Sup port ed by Marathon 2250 and Marathon 1680 Execut e S.M .A. R.T Co mm a nd B0 H Yes Wr ite Bu ffe r E8 H Yes Write D MA (w/r etry) CA H Ye s Wri te DMA (no r etr y) CB H Ye s Wri te Long (w/retry) 32 H Yes Wri te Long (no r etry) 33 H Yes Wri te Multiple C5 H Yes Write S ame E9 H No Wri te Sectors (w/retry ) 30 H Yes ...

  • Seagate 1680 - page 37

    The foll owing commands contain drive-spec ific features that may not be descri bed in the Draft Proposed ATA-3 Standard . 3.2. 2 Iden ti fy Driv e command The Identify Dr ive command (command code EC H ) transfer s information about the drive to the host foll owing power-up. The data is organized as a single 512-byte block of data, the contents of ...

  • Seagate 1680 - page 38

    Word Descri ption Contents 27–46 Drive model number: (40 AS CII char acters, padded wit h blanks to end of string) ST 92 25 5AG or ST91 68 5AG 47 Maximum sec tors per interrupt on read/ write multiple 0010 H 48 Doubl e wor d I/O (not supported) 0000 H 49 Standby timer values supported per A TA standard, IORDY suppor ted, I ORDY can be disabled 2C ...

  • Seagate 1680 - page 39

    Word Descri ption Contents 65 Minimum multiword DMA tr ansfer cycl e time per word (120 nsec) 0078 H 66 Recommended multiword DMA transf er cycle t ime per word (180 ns ec) 0078 H 67 Minimum PIO cycle time without IORDY flow control (363 nsec ) 016B H 68 Minimum PIO cycle time with IORDY f l ow control (120 nsec ) 0078 H 69–127 ATA-res erved 0000 ...

  • Seagate 1680 - page 40

    3.2. 3 Set Feat ures c omman d This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks t he contents of the Featur es registe r, clears BSY and generat es an interrupt . If the value in t he register does not represent a feat ure that the dri ve supports, the co ...

  • Seagate 1680 - page 41

    99 H Not implemented 9A H Not implemented AA H Enable read look-ahead (read cac he) feature (default) AB H Not implemented BB H 4 bytes of E CC apply on read l ong and wri te long c ommands (default) CC H Enable reverting to power-on defaults (default) At power-on or after a hardware reset, the default values of the features are as indicated above. ...

  • Seagate 1680 - page 42

    3.2.4 S.M .A.R. T. commands Self-Monit oring, Analysi s and Reporting T echnology ( S.M.A.R.T.) is an emerging technology that provides near-term fail ure prediction for disc drives. When S. M.A.R.T. i s enabled, the Seagate dr ive monitors prede- termined driv e attributes t hat are susceptible to degradati on over time. If self-monit oring det er ...

  • Seagate 1680 - page 43

    3.2 .5 Drive -S ecu ri ty comma nd s The drive-security commands provide a password-bas ed security sys- tem to prevent unauthorized access to a disc drive. During manufacturing, the master password, SEAGATE, is set for t he drive, and the lock f unction is disabled. The syst em manuf acturer or dealer may s et a new mast er password using the Sec ...

  • Seagate 1680 - page 44

    36 Marathon 2250 and Marathon 1680 P roduct Manual ...

  • Seagate 1680 - page 45

    Appendix . Compa tibility notes ECC testin g When a M arathon 2250 or Mar athon 1680 perfor ms hardware-based ECC error correct ion on-t he-fly, the dr ive does not repor t an E CC error . This allows ECC cor rection wit hout degradi ng drive per formance. Some older drive diagnostic programs test ECC features by creating small data errors and then ...

  • Seagate 1680 - page 46

    ...

  • Seagate 1680 - page 47

    ...

  • Seagate 1680 - page 48

    Sea gat e T ec hnol ogy, I nc. 920 Disc Drive, Scotts Val ley, California 95066, USA Pub l ic at io n Nu mbe r: 3633 7-1 01 , R ev. B, Pr int e d in U SA ...

Fabbricante Seagate Categoria Computer Drive

I documenti che otteniamo dal fabbricante del dispositivoSeagate 1680 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Seagate
- manuali per l’uso 1680
- schede prodotto Seagate
- opuscoli
- o etichette energetiche Seagate 1680
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Seagate 1680.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Seagate 1680, manuali di manutenzione, brevi manuali o manuali utente Seagate 1680. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Seagate 1680.

Manuali per l’uso simili

Manuale completo del dispositivo Seagate 1680, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Seagate 1680 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Seagate 1680.

Il manuale per l’uso completo Seagate, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Seagate 1680 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Seagate 1680, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Seagate 1680 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Seagate 1680 - che ci dovrebbe aiutare nei primi passi durante l'uso Seagate 1680
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Seagate 1680
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Seagate 1680 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Seagate 1680?

Utilizza il modulo sottostante

Se non hai risolto il problema con Seagate 1680 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Seagate 1680 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)