Manuale per l’uso Optoma Optoma EW1610

59 pagine 5.25 mb
Scarica

Vai alla pagina of 59

Summary
  • Optoma Optoma EW1610 - page 1

    1 English T able of Contents ................................................................................... 1 Usage Notice .......................................................................................... 2 Safety Information ......................................................................................... 2 Precautions....... ...

  • Optoma Optoma EW1610 - page 2

    2 English Usage Notice Safety Informations The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magni - tude to constitute a risk of electric shock to persons. The exclamation point within a ...

  • Optoma Optoma EW1610 - page 3

    3 English Usage Notice  When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under “Replacing the Lamp” section on pages 49-50. Precautions Please follow all warnings, precautions and maintenance as recommended in this user ...

  • Optoma Optoma EW1610 - page 4

    4 English Usage Notice Do:    Turn off the product before cleaning.    Use a soft cloth moistened with a mild detergent to clean the display housing.    Disconnect the power plug from the AC outlet if the product is not being used for a long period of time. Don’t:    Do not block the ventilation slots and openi ...

  • Optoma Optoma EW1610 - page 5

    5 English Usage Notice Eye Safety Warnings ▀ ■ Avoid staring directly into the projector’s beam of light at all times. ▀ ■ Minimize standing facing into the beam. Keep your back to the beam as much as possible. ▀ ■ Using a stick or laser pointer is recommended to avoid the need for the presenter to enter the beam. ▀ ■ Ensure that ...

  • Optoma Optoma EW1610 - page 6

    6 English Introduction Product Features This product is a single chip 0.65” WXGA 1280 x 800 DLP ® projector. Outstanding features include:  Texas Instruments Single chip DLP ® Technology  Computer Compatibility: Apple Macintosh, iMac, and VESA Standards: UXGA, SXGA+, SXGA, WXGA, XGA, SVGA, VGA  Video Compatibility: ■  NTSC, NTSC4. ...

  • Optoma Optoma EW1610 - page 7

    7 English Introduction Power Cord 1.8m IR Remote Control Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing.  Due to the difference in applications for each country, some regions may have different accessories. Projector with le ...

  • Optoma Optoma EW1610 - page 8

    8 English Introduction 1. Control Panel 2. Zoom 3. Focus 4. Zoom Lens 5. Elevator Button Main Unit Product Overview 6. Elevator foot 7. IR Receivers 8. Connection Ports 9. Power Socket 10. Tilt-Adjustment Foot 8 9 10 7 6 5 1 2 3 4 7 ...

  • Optoma Optoma EW1610 - page 9

    9 English Introduction Control Panel 1. Enter 2. Menu 3. Power 4. AV Mute 5. Source 6. Re-Sync 7. Four Directional Select Keys 8. Temp LED 9 Lamp LED 10. Power LED 2 7 4 3 10 9 5 6 1 8 ...

  • Optoma Optoma EW1610 - page 10

    10 English Introduction Connection Ports 1. USB Connector (Connect to PC for Remote Mouse function) 2. RS-232 Connector 3. Audio Input Connector 4. S-Video Input Connector 5. DVI-I Input Connector (PC Digital (HDCP)/PC Analog/Component Video Input) 6. VGA In/SCART Connector (PC Analog Signal/Component Video Input, HDTV/SCART Input) 7. VGA Output Co ...

  • Optoma Optoma EW1610 - page 11

    1 1 English Introduction Remote Control 1. Button LED 2. Power On/Off 3. Laser Button 4. Page Up 5. Mouse Right Click 6. Four Directional Select Keys 7. Re-Sync 8. Page Down 9. Volume +/- 10. Zoom 11. AV mute 12. Video Source 13. VGA Source 14. Freeze 15. S-Video Source 16. DVI Source 17. Brightness 18. Menu 19. Keystone +/- 20. Source 21. Enter 22 ...

  • Optoma Optoma EW1610 - page 12

    12 English Installation Connecting the Projector  Due to the difference in applications for each country, some regions may have different accessories. Connect to Computer/Notebook 1............................................................................................................... Power Cord 2....................................... ...

  • Optoma Optoma EW1610 - page 13

    13 English Installation Connect to Video Sources S-Video Output DVD Player, Set-top Box, HDTV receiver 1............................................................................................................... Power Cord 2...................................... SCART RGB/S-Video Adaptor (Optional accessories) 3 ................................ ...

  • Optoma Optoma EW1610 - page 14

    14 English Installation Powering On the Projector 1. Remove th e lens cap.  2. Ensure that the power cord and signal cable are securely connected.  The Power LED will be Amber. 3. Turn on the lamp by pressing “Power” button either on the top of the projector or on the remote. The Power LED will ash green. The startup screen will displa ...

  • Optoma Optoma EW1610 - page 15

    15 English Installation Warning Indicator  When the “LAMP” indicator lights red, the projector will automatically shut itself down. Please contact your local reseller or service center. See pages 56-57.  When the “TEMP” indicator lights red, it indicates the projector has overheated. The projector will automatically shut itself down. ...

  • Optoma Optoma EW1610 - page 16

    16 English Installation Adjusting the Projected Image Adjusting the Projector’s Height The projector is equipped with elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button  . 2. Raise the image to the desired height angle  , then release the button to lock the elevator foot into position. 3. Use scre ...

  • Optoma Optoma EW1610 - page 17

    17 English Installation Focus Ring Zoom Ring Adjusting the Projector’s Zoom / Focus Adjusting Projection Image Size You may turn the zoom lever to zoom in or out. To focus the image , rotate the focus ring until the image is clea r. The project or will focus at distances from 3.9 to 39.4 feet (1.2 to 12.0 meters). Hd 81.9" (208.1cm) 136.6&qu ...

  • Optoma Optoma EW1610 - page 18

    18 English User Controls Control Panel Control Panel & Remote Control There are two ways for you to control the functions: Control Panel and Remote Control. Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 14-15. Menu Press “Menu” to launch the on-screen display (OSD) menu. To exit OSD, Press “M ...

  • Optoma Optoma EW1610 - page 19

    19 English User Controls Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 14-15. Laser Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. PC/Mouse control The PC/Mouse control can be used to con - trol mouse movement. The mouse function is enabled using the US ...

  • Optoma Optoma EW1610 - page 20

    20 English User Controls Using the Remote Control Menu Press “Menu” to launch the on-screen display (OSD) menu. To exit OSD, Press “Menu” again. Zoom Press “+/-” button to zoom in of an image. DVI Press “DVI” to choose DVI source. VGA Press “VGA” to choose source from VGA- IN connector. AV Mute Momentarily turns off/on the audio ...

  • Optoma Optoma EW1610 - page 21

    21 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select ...

  • Optoma Optoma EW1610 - page 22

    22 English User Controls Menu Tree ...

  • Optoma Optoma EW1610 - page 23

    23 English User Controls Image Display Mode There are many factory preset optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater .  sRGB: Standardised accurate color.  User: User’s own settings. Brightness Adjust the brightne ...

  • Optoma Optoma EW1610 - page 24

    24 English User Controls Image Saturation Adjust a video image from black and white to fully saturated color.  Press the to decrease the amount of saturation in the image.  Press the to increase the amount of saturation in the image. Tint Adjust the color balance of red and green.  Press the to increase the amount of green in the image. ? ...

  • Optoma Optoma EW1610 - page 25

    25 English User Controls Image | Color Color Select the Red/Green/Blue Gain for brightness adjustments and Bias for contrast adjustments for the whole picture. Individual color adjustments for Cyan, Magenta, Yellow can also be adjusted. Reset Choose “Yes” to return the factory default settings for color adjustments. ...

  • Optoma Optoma EW1610 - page 26

    26 English User Controls Image | Advanced Degamma Allow you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input.  Film: for home theater.  Video: for video or TV source.  Graphics: for image source.  PC: for PC or computer source. White Peaking This adjustable item utilizes a new color-p ...

  • Optoma Optoma EW1610 - page 27

    27 English User Controls Image AI Image AI improves the contrast of the picture by optimizing the brightness of the lamp according to the picture content.  On: The dynamic image performance manager is active in making sure your greatest pleasure from seeing a movie dynamically with the most dark details revealed, vivid and bright image performed ...

  • Optoma Optoma EW1610 - page 28

    28 English User Controls Image | Advanced Input Source Enable input sources. Press “ ” into the next menu as below and then use or to select. Press “Enter” to nalize the selection. The projector will not search inputs that are de-selected. ...

  • Optoma Optoma EW1610 - page 29

    29 English User Controls Display Format Use this function to choose your desired aspect ratio.  4:3: This format is for 4x3 input sources not enhanced for Wide screen TV.  16:10: This format is for 16x10 input sources, like HDTV and DVD enhanced for Wide screen TV.  16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced fo ...

  • Optoma Optoma EW1610 - page 30

    30 English User Controls LBX format 16 : 9 format or 16 : 10 format or 4 : 3 format Input Signal Display area Picture area Display on Screen Detail information about LBX mode : 1) Some Letter-Box DVD contents are not enhanced for 16x9 TV, then image will not look right in 16:9 display. One can use 4:3 mode to view the correct info. But if the conte ...

  • Optoma Optoma EW1610 - page 31

    31 English User Controls Overscan Overscan function removes the noise in a video image. Overscan the im age to remo ve vide o e ncodi ng noise on t he edge of vi deo source. Zoom  Press the to reduce the size of an image.  Press the to magnify an image on the projection screen. H Image Shift Shift the projected image position horizontally. V ...

  • Optoma Optoma EW1610 - page 32

    32 English User Controls PC Mode This mode is only functional when the projector unit is used with a PC signal, either via an Analog or Digital connector.  Wide: If your PC output is a wide screen format resolution you must select this setting. Examples of Wide screen resolutions are: 720 x 400 / 854 x 480 / 1280 x 720 / 1280 x 768.  Normal: ...

  • Optoma Optoma EW1610 - page 33

    33 English User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. Setup | Language ...

  • Optoma Optoma EW1610 - page 34

    34 English User Controls Setup Projection  Front-Desktop The factory default setting.  Rear-Desktop When you select this function, the projector reverses the im age so you can project behind a translucent screen.  Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection.  Rear ...

  • Optoma Optoma EW1610 - page 35

    35 English User Controls Setup Start Up Logo Use this function to select your desired start-up screen.  On: Choose “On” to show the Optoma logo.  Off: Choose “Off” to show a blank image. Screen Type Choose the screen type as 16:10 (1280 x 800) or 16:9 (1280 x 720).  16:10 screen Source 480i/p 576i/p 720p 1080i/p PC 4:3 Scale to 106 ...

  • Optoma Optoma EW1610 - page 36

    36 English User Controls Setup | Security Security  On: Choose “On” to use security verication when the turning on the projector.  Off: Choose “Off” to be able to switch on the projector without password verication. Security Timer Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be us ...

  • Optoma Optoma EW1610 - page 37

    37 English User Controls Setup | Security ■ First Time: 1. T h ePasswordis4di g it s,DEF AULTV A LUEis“ 12 34” .(  rsttime) 2. Us en umbe rbu tt onsonth eremotetos electyourpass word,andth en press “ ”ke ytoc on rmyo u rs electio n. Change Passwor ...

  • Optoma Optoma EW1610 - page 38

    38 English User Controls Setup | Signal Phase Synchronize the signal timing of the display with the graphic card. If you experience an unstable or ickering image, use this function to correct it. Frequency Change the display data frequency to match the frequency of your computer’s graphic card. If you experience a vertical ickering bar, use ...

  • Optoma Optoma EW1610 - page 39

    39 English User Controls Menu Location Choose the menu location on the display screen. Source Lock  On: The projector will search specied connection port.  Off: The projector will search for other signals if the current input signal is lost. High Altitude Choose “On” to turn on High Altitude mode. Operates the fans at full speed contin ...

  • Optoma Optoma EW1610 - page 40

    40 English User Controls Options Volume  Press the to decrease the volume.  Press the to increase the volume. Reset Choose “Yes” to return the display parameters on all menus to the factory default settings. ...

  • Optoma Optoma EW1610 - page 41

    41 English User Controls Direct Power On Choose “On” to turn on Direct Power On mode. The projector will automatically power on when AC power is supplied, with - out pressing the “Power” key on the projector control panel or “Power” key on the remote control. Auto Power Off (min) Set the countdown timer interval. The countdown timer wil ...

  • Optoma Optoma EW1610 - page 42

    42 English User Controls Options | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode  STD: Choose “STD” to dim the projector lamp whi ...

  • Optoma Optoma EW1610 - page 43

    43 English Appendices Image Problems No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replac ...

  • Optoma Optoma EW1610 - page 44

    44 English Appendices 6. Select the “Change” button under the “Monitor” tab. 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. Verify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 x 1200) ...

  • Optoma Optoma EW1610 - page 45

    45 English Appendices Image is out of focus  Make sure the lens cap is removed.  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance 3.9 to 39.4 feet (1.2 to 12.0 meters) from the projector. See page 17. The image is stretched when displaying 16:9 DVD title When you play anamorphic ...

  • Optoma Optoma EW1610 - page 46

    46 English Appendices Intermission Problems The projector stops responding to all controls  If possible, turn off the projector, then unplug the power cord and wait at least 60 seconds before reconnecting power. Lamp burns out or makes a popping sound  When the lamp reaches its end of life, it will burn out and may make a loud popping sound. ...

  • Optoma Optoma EW1610 - page 47

    47 English Appendices Message Reminders  Fan failed:  Temperature warning:  Replacing the lamp:  Out of range: (refer to page 51) ...

  • Optoma Optoma EW1610 - page 48

    48 English Appendices Remote Control Problems If the remote control does not work  Check the operating angle for the remote control is approximately ±22.5°.  Make sure there are no obstructions between the remote control and the projector. Move to within 6 m (20 ft) of the projector.  Make sure the batteries are inserted correctly.  R ...

  • Optoma Optoma EW1610 - page 49

    49 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at l ea ...

  • Optoma Optoma EW1610 - page 50

    50 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “Power” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Use a screwdriver to unscrew the 2 screws from the cover.  5. Push up and remove the cover.  6. Use a screwdriver to unscre ...

  • Optoma Optoma EW1610 - page 51

    51 English Appendices Compatibility Modes Mode Resolution V-Sync (Hz) Analog Digital VGA 640 x 480 60, 72, 75, 85 60, 72, 75, 85 VGA 720 x 400 70, 85 70, 85 SVGA 800 x 600 56, 60, 72, 75, 85 56, 60, 72, 75, 85 SVGA 832 x 624 72 72 XGA 1024 x 768 60, 70, 75, 85 60, 70, 75, 85 XGA 1152 x 864 60, 70, 75, 85 60, 70, 75, 85 WXGA 1280 x 720 50, 60 *** WX ...

  • Optoma Optoma EW1610 - page 52

    52 English Appendices RS232 Commands Pin no. Name I/O (From Projec - tor Side 1 TXD OUT 2 RXD IN 3 GND __ Pin no. Spec. 1 N/A 2 RXD 3 TXD 4 DRT 5 GND 6 DSR 7 RTS 8 CTS 9 N/A 1 2 3 4 5 6 7 8 9 1 2 3 RS232 Connector ...

  • Optoma Optoma EW1610 - page 53

    53 English Appendices RS232 Pr otocol Function List RS232 Commands Baud Rate: 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F XX=01-99, projector's ID, XX=00 is for all projectors SEND to projector ----------------------- ----------------------------- ...

  • Optoma Optoma EW1610 - page 54

    54 English Appendices SEND to projector ----------------------- ----------------------------- ----------------------------------------- ---------------------------------- -------------------------------------- -------------------- 232 ASCII Code H E X C ode Function Des criptio n ----------------------- ----------------------------- --------------- ...

  • Optoma Optoma EW1610 - page 55

    55 English Appendices  Please note that damage resulting from incorrect installation will invalidate the warranty. Warning: 1. If you buy the ceiling mount from other company, please ensure that there is at least 10cm distance between the bottom cover of the projector and the ceiling. 2. Avoid placing the projector near sources of heat such a ...

  • Optoma Optoma EW1610 - page 56

    56 English Appendices Optoma Global Ofces Forserviceorsupportpleasecontactyourlocalofce. USA 715 Sycamore Drive Tel : 408-383-3700 Milpitas, CA 95035, USA Fax : 408-383-3702 www.optomausa.com Service : services@optoma.com Canada 5630 Kennedy Road, Mississauga, ON, L4Z 2A9, Canada Tel : 905-361-2582 www.optoma.ca Fax : ...

  • Optoma Optoma EW1610 - page 57

    57 English Appendices Korean WOOMI TECH.CO.,LTD. 4F,Minu Bldg.33-14, Kangnam-Ku, Tel : +82+2+34430004 seoul,135-815, KOREA Fax : +82+2+34430005 Japanese 東京都足立区綾瀬3-25-18 株式会社オーエスエム E-mail : info@osscreen.com サポートセンター: 0120-46-5040  www.os-worldwide.com Taiwan 5F., No. 108, Minchiuan Rd. Tel : ...

  • Optoma Optoma EW1610 - page 58

    58 English Appendices Regulation & Safety notices Thisappendixliststhegeneralnoticesofyourprojector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful i ...

  • Optoma Optoma EW1610 - page 59

    59 English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class ...

Fabbricante Optoma Categoria Projector

I documenti che otteniamo dal fabbricante del dispositivoOptoma Optoma EW1610 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Optoma
- manuali per l’uso EW1610
- schede prodotto Optoma
- opuscoli
- o etichette energetiche Optoma Optoma EW1610
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Optoma Optoma EW1610.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Optoma Optoma EW1610, manuali di manutenzione, brevi manuali o manuali utente Optoma Optoma EW1610. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Optoma Optoma EW1610.

Manuali per l’uso simili

Manuale completo del dispositivo Optoma Optoma EW1610, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Optoma Optoma EW1610 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Optoma Optoma EW1610.

Il manuale per l’uso completo Optoma, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Optoma Optoma EW1610 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Optoma Optoma EW1610, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Optoma Optoma EW1610 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Optoma Optoma EW1610 - che ci dovrebbe aiutare nei primi passi durante l'uso Optoma Optoma EW1610
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Optoma Optoma EW1610
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Optoma Optoma EW1610 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Optoma Optoma EW1610?

Utilizza il modulo sottostante

Se non hai risolto il problema con Optoma Optoma EW1610 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Optoma Optoma EW1610 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)