-
Kenmore 5303304549 - page 1
5303304549 I_ MP_4UFk Recycled Paner Read and Save These Instructions Pi%-_ 208283-1010 Rev ! ...
-
Kenmore 5303304549 - page 2
Kenmore Electric Range Thank you for choosing this appliance, The information contained within this Owner's Guide will instruct you on how to properly operate and care for your range. The Cooking Guidewill help you to receive favorable results during cooking and baking. Please read through the information contained in your literature pack to l ...
-
Kenmore 5303304549 - page 3
BMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. This guide contains important safety symbols and instructions Please pay special attention to these symbols and follow a!f instructions given Here is a brief explar_ation of the use of these symbols _This symbol wilt help alert you to situations that may _This symbol w ...
-
Kenmore 5303304549 - page 4
gMPORTANT SAFETY iMPORTANT INSTRUCTIONS FOR USING YOUR COOKTOP - Know which knob controls each surface etement_ Use Proper Pan Size---This appliance is equipped with surface elements of different sizes, Select utensils having flat bottoms large enough to cover the surface element. The use of undersized utensils will expose a portion of the heating ...
-
Kenmore 5303304549 - page 5
FEATURES 16 17A 17B 18 1 Model and Seria! Numbers 2 Surface Unit Controls 3 Surface Unit's Indicator Light 4 Oven Control 5 Right Oven Temp Control 6 Left Oven Temp Control 7 Right Oven Indicator Light 8 Left Oven Indicator Light 9 Automatic Oven Timer Clock and Minute Timer 11 Oven Cleaning Light 12 Plug-In Surface Unit, (Z) 6 in., (Z) 8 in, ...
-
Kenmore 5303304549 - page 6
Setting the Clock Minute Timer (som models) When the range is first plugged in, or when the power supply to the range i disconnected, "O0:O0" is displayed in the display window To Set the Clock t. Turn the set knob counter clockwise until the control beeps once and the wor( TIME is displayed in the lower left corner of the display. 2. Tur ...
-
Kenmore 5303304549 - page 7
Before Setting Oven Controls Oven Vent Locatii_n The oven is vented through the center of the left rear element for the left oven and the center of the right tea r element for the right oven When an oven is on, warm air is released through the vent, This venting is necessary for proper air circuIation in the oven and good baking results Arranging O ...
-
Kenmore 5303304549 - page 8
Setting Oven Controls (continued) 1. Push in and turn the griddle control in either direction to the desired setting Start most cooking operations on a higher setting; then turn to a lower setting to finish cooking 2. The controls do not have to be set exactly on a particular mark Use the marks as a guide and adjust the control as needed 3.. The gr ...
-
Kenmore 5303304549 - page 9
Setting Oven Controls (continued) Broiler Grid Br_iter Broil Stop Position Broil Stop Position Broiling Broiling is a quick method of cooking foods by direct heat under the upper broil element of the oven, Results and cooking times will depend on the broil setting used and the distance between the food and the element Preheating: Preheating is sugg ...
-
Kenmore 5303304549 - page 10
Oven Cleaning (cleaning the porcelain ename! oven) Small Oven is a Porcelain Enamel Oven--A General Description Porcelain has a smooth finish and is a type of glass fused to metal. With porcelain, commercial oven cleaners can be used on aEl interior surfaces.. _ Do NOTfl'ine the oven walls, racks or bottom with aluminum foil, Doing so will des ...
-
Kenmore 5303304549 - page 11
Oven Cleaning (self-cleaning instructions) _During the self-cleaning cycle, the outside of thelange can become very hot to the touch_ DO NOT leave smalt children unattended nearthe appliance., DO NOT line the oven walls, racks or bottom with aluminum foil.. Doing so will destroy heat distribution during cleaning, and the aluminum foil will melt to ...
-
Kenmore 5303304549 - page 12
Oven Cleaning (self-cleaning instructions, continued) l Be sure to remove ever_hing from the oven and complete the suggested precteaning steps before setting the controls. To Start the Self-Clean Cycle *We recommend a 2 hour self-clean cycle for Fight soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactor ...
-
Kenmore 5303304549 - page 13
General Cleaning Be careful not to bend terminal ends when replacing elements after cleaning the drip bowls Surface Elements and Drip Bowls Surface elements can be unplugged and removed to make cleaning the drip bowls easien The surface elements clean themselves when they are turned on Food spilled on a hot element will burn off, Food spilled o ...
-
Kenmore 5303304549 - page 14
General Cleaning (continued) Cleaning Various Parts of Your Range Before cleaning any part of the range, be sure all controls are turned OFF and the range is COOL, Remove spitfovers and stains as soon as they occur, REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE REGULAR CLEANINGS WILL REDUCE THE NUMBER OF MAJOR CLEANINGS LATER Surfaces Alu ...
-
Kenmore 5303304549 - page 15
Oven Light Be sure the range is unplugged and all parts are COOL before replacing the oven light,, - Wire Holder Glass Shield The oven light automatically turns on when the door is opened (some models) Use the switch (some models) located on the control panel to turn the light on when the door is closed. Changing the Oven Light: The oven light is l ...
-
Kenmore 5303304549 - page 16
Anti-Tip Brackets Installation Instructions Important Safety Warning To reduce the risk of tipping of the range, the range must be secured to the floor by properly installed anti-tip brackets and screws packed with the range Failure to install the anti-tip brackets could allow the range to accidentally tip over ff excessive weight is placed on an o ...
-
Kenmore 5303304549 - page 17
Avoid Service Checklist Before you calf for service, review this list It may save you time and expense The list includes common occurrences that a re not the result of defective workmanship or materials in this appliance OCCURRENCE I N STALLATtON Range is not level. POSSIBLE CAUSE SOLUTION Poor installation. Place oven rack in center of oven Place ...
-
Kenmore 5303304549 - page 18
OCCURRENCE SURFACE ELEMENTS (continued) Surface element does not heat_ POSSIBLE CAUSE SOLUTION No power to appliance Check/reset circuit breaker or replace fuse If the problem is a circuit overload, have this situation corrcted by a quali- fied electrician, Incorrect control turned on Be sure to use the correct control for the element to be used, O ...
-
Kenmore 5303304549 - page 19
OCCURRENCE POSSIBLE CAUSE SOLUTION SELF-CLEANING INSTRUCTIONS Self-cleaning cycle does not work. Controls not set properly Follow instructions under Oven Cleaning (self-cleaning instructions). Self-cleaning cycle was interrupted. Stop time must be set 3 to 4 hours past the start time Follow steps under "Stopping or Interrupting the Self-Clean ...
-
Kenmore 5303304549 - page 20
Dear Customer: | Our constant efforts are | directed toward making | sure your new Kenmore ! t Range will arrive at your ' t home in perfect condi- tion and will give you i ! proper performance, As i I part of these efforts, we I I feel it is our responsi- I I bility to provide you with i J this warranty _ for your t ! range, - J KENMORE ELEC ...
Hai una domanda su Kenmore 5303304549?
Utilizza il modulo sottostante
Se non hai risolto il problema con Kenmore 5303304549 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Kenmore 5303304549 è probabile che voglia condividere il modo di risolverlo.