Italiano dropdown-ico

Manuale per l’uso Axis Communications P1425-E

58 pagine 0.78 mb
Scarica

Vai alla pagina of 58

Summary
  • Axis Communications P1425-E - page 1

    AXIS P1425-E Network Camera User Manual ...

  • Axis Communications P1425-E - page 2

    About this Document This manual is intended for administrators and users of the AXIS P1425-E Network Camera, and is applicable to rmware 5.55 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based syst ...

  • Axis Communications P1425-E - page 3

    Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RT C). Under normal conditions this battery will last for a minimum of ve years. Low battery power affects the operation of the RT C, causing it to reset at every power-up. When the battery needs replacing, a log message will app ...

  • Axis Communications P1425-E - page 4

    AXIS P1425-E Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

  • Axis Communications P1425-E - page 5

    AXIS P1425-E Network Camera T able of Contents P erformance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 5 ...

  • Axis Communications P1425-E - page 6

    AXIS P1425-E Network Camera Hardware Overview Hardware Overview 2 3 4 5 1 6 1 microSD card slot 2 I/O connector 3 Control button 4 Network connector 5 Status LED indicator 6 P art number (P/N) & Serial number (S/N) Connectors and Buttons For technical specications, see page 54 . Network Connector RJ45 Ethernet connector with P ower over Ethe ...

  • Axis Communications P1425-E - page 7

    AXIS P1425-E Network Camera Hardware Overview SD Card Slot A microSD card (not included) can be used for local recording with removable storage. For more information, see Technical Specications on page 54 . NO NO NO TICE TICE TICE • Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card. • ...

  • Axis Communications P1425-E - page 8

    AXIS P1425-E Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating systems. See T ...

  • Axis Communications P1425-E - page 9

    AXIS P1425-E Network Camera Access the Product The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must be reset to the factory default settings. See Reset to Factory Default Settings on page 49 . To set the password via a standard HTTP connection, enter it directly in the dialo ...

  • Axis Communications P1425-E - page 10

    AXIS P1425-E Network Camera Access the Product Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Cong > Action Buttons . The product’s heater is controlled by the ambient temperature and is turned on a ...

  • Axis Communications P1425-E - page 11

    AXIS P1425-E Network Camera Access the Product Note These controls are available if digital PTZ is enabled in the selected view area, see View Area on page 20 . With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or release control of the PTZ controls. The PTZ Control Queu ...

  • Axis Communications P1425-E - page 12

    AXIS P1425-E Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream proles. Other applicat ...

  • Axis Communications P1425-E - page 13

    AXIS P1425-E Network Camera Media Streams The AMC Control P anel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Control P anel (f ...

  • Axis Communications P1425-E - page 14

    AXIS P1425-E Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 14 ...

  • Axis Communications P1425-E - page 15

    AXIS P1425-E Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all sett ...

  • Axis Communications P1425-E - page 16

    AXIS P1425-E Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 16 . • Stream proles. See page 17 . • Camera settings. See page 18 . • View areas. See page 20 . • Overlay image. See page 20 . • Privacy mask. See page 22 . • Focus and zoom. See page 22 ...

  • Axis Communications P1425-E - page 17

    AXIS P1425-E Network Camera Video • Maximum frame rate . To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a xed amount. Alternatively , the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible under the current conditions. • Overlay settings . Se ...

  • Axis Communications P1425-E - page 18

    AXIS P1425-E Network Camera Video • In the Live View page – select the stream prole from the Stream prole drop-down list. For quick setup, use one of the predened stream proles. Each predened prole has a descriptive name, indicating its purpose. If required, the predened stream proles can be modied and new customized ...

  • Axis Communications P1425-E - page 19

    AXIS P1425-E Network Camera Video Shutter speed is related to the amount of time the shutter is opened and is measured in seconds (s). A slow shutter speed allows more light to reach the sensor and can help produce a brighter image in low light situations. On the other hand, a slow shutter speed can cause moving objects to appear blurry . Set Shutt ...

  • Axis Communications P1425-E - page 20

    AXIS P1425-E Network Camera Video View Area A view area is a cropped part of the full view . Each view area is treated as a video source in Live View and has its own video stream and PTZ settings. When setting up a view area it is recommended that the video stream resolution is the same size as or smaller than the view area size. Setting the video ...

  • Axis Communications P1425-E - page 21

    AXIS P1425-E Network Camera Video Overlay Image An overlay image is a static image superimposed over the video stream. The image, for example a company logo, is used to provide extra information or to mask a part of the image. Since it is static, the position and size of an overlay image will remain the same regardless of resolution and P an/Tilt/Z ...

  • Axis Communications P1425-E - page 22

    AXIS P1425-E Network Camera Video 1. Go to Video > Video Stream and select the Image tab . 2. Under Overlay Settings , select Include text . 3. Enter the modier #D and, optionally , additional text which will be displayed also when the action rule is not active. Create the action rule: 1. Go to Events > Action Rules 2. Click Add to create ...

  • Axis Communications P1425-E - page 23

    AXIS P1425-E Network Camera Video Note • Movements in front of the camera should be avoided during automatic focusing. On the Advanced tab , focus can be adjusted manually: 1. Click Open iris to open the iris to its maximum position. This gives the smallest depth of eld and provides the best conditions for focusing. 2. Focus is set in the Focu ...

  • Axis Communications P1425-E - page 24

    AXIS P1425-E Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 17 . • Default Viewer for Browser . See page 24 . • Viewer Settings. See page ...

  • Axis Communications P1425-E - page 25

    AXIS P1425-E Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved t ...

  • Axis Communications P1425-E - page 26

    AXIS P1425-E Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 20 . Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic positio ...

  • Axis Communications P1425-E - page 27

    AXIS P1425-E Network Camera PTZ (Pan Tilt Zoom) To disable specic controls, deselect the options under Enable/Disable controls . If using multiple view areas, deselecting a control will only disable the control in the selected view area. Control Queue Note • The administrator can enable and disable PTZ controls for selected users. • To ident ...

  • Axis Communications P1425-E - page 28

    AXIS P1425-E Network Camera Detectors Detectors Camera T ampering Camera T ampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. T o send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera T ampering . 2. Set ...

  • Axis Communications P1425-E - page 29

    AXIS P1425-E Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detectio ...

  • Axis Communications P1425-E - page 30

    AXIS P1425-E Network Camera Detectors Note • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high history ...

  • Axis Communications P1425-E - page 31

    AXIS P1425-E Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, downlo ...

  • Axis Communications P1425-E - page 32

    AXIS P1425-E Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 32 ...

  • Axis Communications P1425-E - page 33

    AXIS P1425-E Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action rule. ...

  • Axis Communications P1425-E - page 34

    AXIS P1425-E Network Camera Events Add Recipients The product can send media les and messages to notify users about events. Before the product can send media les or notication messages, you must dene one ore more recipients. For information about available options, see . To add a recipient: 1. Go to Events > Recipients and click Add ...

  • Axis Communications P1425-E - page 35

    AXIS P1425-E Network Camera Events Set Up Recurrences Recurrences are used to trigger action rules repeatedly , for example every 5 minutes or every hour . To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive name and recurrence pattern. 3. Click OK . To use the recurrence in an action rule, rst select ...

  • Axis Communications P1425-E - page 36

    AXIS P1425-E Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 36 . • To set up action rules, see page 33 . • To access recordings, see Recording List on page 36 . • To congure camera controlled storage, see Sto ...

  • Axis Communications P1425-E - page 37

    AXIS P1425-E Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Sele ...

  • Axis Communications P1425-E - page 38

    AXIS P1425-E Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may a ...

  • Axis Communications P1425-E - page 39

    AXIS P1425-E Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired pr ...

  • Axis Communications P1425-E - page 40

    AXIS P1425-E Network Camera System Options A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-signed certicate offers limited protection and can be used before a CA-issued certicate has been obtained. To install a self-signed certicate: 1. Go to Setup > System Options > Security > Ce ...

  • Axis Communications P1425-E - page 41

    AXIS P1425-E Network Camera System Options IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP . The IPv4 settings are congured under System Options > Network > T CP/IP > Basic . DHCP (Dynamic Host Conguration Protocol) allows network administr ...

  • Axis Communications P1425-E - page 42

    AXIS P1425-E Network Camera System Options 5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar . 6. Open a browser and type http://<IP address> in the Location/Address eld. For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an ...

  • Axis Communications P1425-E - page 43

    AXIS P1425-E Network Camera System Options NTP Conguration NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server . To m ...

  • Axis Communications P1425-E - page 44

    AXIS P1425-E Network Camera System Options Use manually selected NAT router - Select this option to manually select a NA T router and enter the IP address for the router in the eld. If no router is specied, the product automatically searches for NAT routers on your network. If more than one router is found, the default router is selected. Alt ...

  • Axis Communications P1425-E - page 45

    AXIS P1425-E Network Camera System Options Traps are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the T rap community that should receive the message. Note If HTTPS is enabled, SNMP v1 and SNMP v2c should ...

  • Axis Communications P1425-E - page 46

    AXIS P1425-E Network Camera System Options Storage SD Card NO NO NO TICE TICE TICE To prevent corruption of recordings, the SD card should always be unmounted before it is ejected. Note For SD card recommendations see www .axis.com Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card ...

  • Axis Communications P1425-E - page 47

    AXIS P1425-E Network Camera System Options P orts & Devices I/O P orts The Axis product provides one input port and one output port for connection of external devices. For information about how to connect external devices, see Connectors on page 56 . The I/O ports are congured under System Options > P orts & Devices > I/O P orts . ...

  • Axis Communications P1425-E - page 48

    AXIS P1425-E Network Camera System Options System Overview To get an overview of the Axis product’s status and settings, go to System Options > Support > System Overview . Information that can be found here includes rmware version, IP address, network and security settings, event settings, image settings and recent log items. Many of the ...

  • Axis Communications P1425-E - page 49

    AXIS P1425-E Network Camera System Options Plain Cong Plain Cong is for advanced users with experience of Axis product conguration. Most parameters can be set and modied from this page. To open Plain Cong, go to System Options > Advanced > Plain Cong . Axis Support does not provide assistance. Reset to Factory Default Settin ...

  • Axis Communications P1425-E - page 50

    AXIS P1425-E Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. The cur ...

  • Axis Communications P1425-E - page 51

    AXIS P1425-E Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try the insta ...

  • Axis Communications P1425-E - page 52

    AXIS P1425-E Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the client Check ...

  • Axis Communications P1425-E - page 53

    AXIS P1425-E Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . T o identify the source of the problem, check the System Log under System Options > Support > Logs & Rep ...

  • Axis Communications P1425-E - page 54

    AXIS P1425-E Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P1425–E Image sensor 1/2.8” progressive scan CMOS Lens f=3-1 0.5 mm F1.4 Autofocus Automatic day and night functionality Horizontal angle of view: 33° - 93° V ertical angle of view: 19° - 50° Diagonal angle of vi ...

  • Axis Communications P1425-E - page 55

    AXIS P1425-E Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications; specications available at www .axis.com AXIS Video Hosting System (A VHS) with One-Click Camera Connection ...

  • Axis Communications P1425-E - page 56

    AXIS P1425-E Network Camera T echnical Specifications Function/group Item Specications Video management software AXIS Camera Companion (software included on CD) — Basic surveillance for small businesses, where video is recorded to edge storage. AXIS Camera Station (sold separately) — Fully featured surveillance for medium-sized installation ...

  • Axis Communications P1425-E - page 57

    AXIS P1425-E Network Camera T echnical Specifications 12 V max 15 m A 1 2 3 4 SD Card Slot Supports microSD cards with up to 64 GB of storage. For best recording performance, use a microSDHC or microSDXC card with speed class 1 0. P erformance Considerations When setting up your system, it is important to consider how various settings and situatio ...

  • Axis Communications P1425-E - page 58

    User Manual V er . M2.3 AXIS P1425-E Network Camera Date: December 2014 © Axis Communications AB, 20 14 P art No. 6 1630 ...

Fabbricante Axis Communications Categoria Security Camera

I documenti che otteniamo dal fabbricante del dispositivoAxis Communications P1425-E possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Axis Communications
- manuali per l’uso P1425-E
- schede prodotto Axis Communications
- opuscoli
- o etichette energetiche Axis Communications P1425-E
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Axis Communications P1425-E.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Axis Communications P1425-E, manuali di manutenzione, brevi manuali o manuali utente Axis Communications P1425-E. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Axis Communications P1425-E.

Manuali per l’uso simili

Manuale completo del dispositivo Axis Communications P1425-E, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Axis Communications P1425-E dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Axis Communications P1425-E.

Il manuale per l’uso completo Axis Communications, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Axis Communications P1425-E - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Axis Communications P1425-E, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Axis Communications P1425-E che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Axis Communications P1425-E - che ci dovrebbe aiutare nei primi passi durante l'uso Axis Communications P1425-E
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Axis Communications P1425-E
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Axis Communications P1425-E in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Axis Communications P1425-E?

Utilizza il modulo sottostante

Se non hai risolto il problema con Axis Communications P1425-E con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Axis Communications P1425-E è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)