-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 1
PLATINUM BEAM 5R KEEP THIS MANUAL FOR FUTURE NEEDS ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 2
2 XM485-V1.0-NR ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 3
...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 4
2 Thank you for your patronage. W e are confident that our excellent products and service can satisfy you. For your own safety , please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly . W e suggest that the installation and operation should be done by the ve ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 5
3 · Stepless frost, 0%~100% linear change frost · Strobe/shutter: High speed shutter , 0-13 Hz or random strobe · Control board with full color LCD graphic display and touch-keyboard · Auto-program: 7 pre-built programs can be selected. · Software-upload by optional accessory via DMX line Overview SAFETY INSTRUCTIONS XM485-V1.0-NR 1) Lens 2) D ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 6
4 This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Important: Damages caused by the disregard of this user manual are not subject to warranty . The dealer ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 7
5 GENERAL GUIDELINES This device is a lighting effect for professional use on stages, in discothe ques, theatres, etc., the device was designed for indoor use only . This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual. Lighting effects are not desi ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 8
6 Before replacing the lamp let the lamp cool down, because during operation, the lamp can reach very high temperature. During the installation of halogen lamps do not touch the glass bulbs bare handed. Always use a cloth to handle the lamps during insertion and removal. Do not install lamps with a higher wattage. They generate higher temperatures ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 9
7 weight for 1 hour without any harming deformation. The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety rope. Never stand directly below the device when mounting, removing or servicing the fixture. The operator has to make sure the safety relating and machine technical installations are approved b ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 10
8 Installation via the Omega holders a) Fixed the clamp on the bracket by tighten up the M12 screw on the bracket to the Ф 13 hole in the middle of the bracket. b) Insert the quick-lock fasteners of the first Omega holder into the respective holes on the bottom of the device. T ighten the quick-lock fasteners fully clockwise. c) Install the second ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 11
9 DMX-512 connection with DMX terminator For installations where the DMX cable has to run a long distance or is in an electrically noisy environment, such as in a discotheque, it is recommended to use a DMX terminator . This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug wi ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 12
10 to 1, the second unit to 14(13 + 1), the third to 27 (13 + 14), and so on. Control Board The Control Board offers several features: you can simply set the starting address , run the pre-programmed program or make a reset. The main menu is accessed by pressing the -button until the display starts flashing. Browse through the menu by pressing the ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 13
11 T emperature Info Head T empe rature Head T empe rature Head T empe rature Head T empe rature Head T empe rature XXX ℃ / ℉ XXX ℃ / ℉ T emperature in the head Software V ersion V er1.0…… V er1.0…… V er1.0…… V er1.0…… V er1.0…… V er1.0…… V er1.0…… Software version of each IC La mp Con trol Lamp On or Off Automat ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 14
12 rs Mo de Set Edit User Mode Edit User Mode Max Channel = XX P AN = CH01 : Max Channel = XX P AN = CH01 : Max Channel = XX P AN = CH01 : Max Channel = XX P AN = CH01 : Max Channel = XX P AN = CH01 : Max Channel = XX P AN = CH01 : Preset User modes Edit Pro gra m Select Programs Select Programs Auto Pro Part 1 = Program 1 ~ 10 Program 1 Auto Pro P ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 15
13 mode. Each slave setting will have a dif ferent function for a dynamic lightshow without a controller . Auto Program This function allows the internal programs to run in either stand-alone or master/ salve mode. In “Master” mode the fixture will send DMX data to other fixtures connect via the DMX chain. In “Alone” mode the fixture will o ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 16
14 counter should be reset after every lamp change. Lamp Off Time This function displays the running time of the lamp from the last power on. The display shows “XXXX”, where “XXXX” represents the number of hours the lamp has been running since it was last struck. This counter is automatically reset after every power-on. Timer Password Use t ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 17
15 Lamp Control: Lamp On or Off This function allows manual control of the lamp power via the on-board system menu. • Select “ON” if you wish to strike the lamp or “OFF” to switch it off. • Press “ENTER” to confirm. • Press the Mode/Esc-button to return to the main menu. Automatic La-On When in the “ON” position, this function ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 18
16 Personality: Status setting Address via DMX - This function allows the DMX address to remotely be adjusted from a DMX console. This setting requires special settings for both the controller and the fixture. RDMX is on by de fault. For operational instructions please see Section 10/Page 35 of this manual “Remote DMX addressing.” No DMX Status ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 19
17 includes original Design Spot 250s. T here are 3 different mode variations; Speed 1 (Default): S lower than the original Design Spot 250 for smoother , more precise movements. Speed 2: Pan and T ilt speeds are identical to the first generation Design Spot 250. Speed 3: includes a faster Pan speed. Pan speed is 0.5 seconds faster than original DS ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 20
18 function is disabled as default. Key Lock – This function allows you to lock the keys on the display to prevent menu tampering. With this function you can activate the automatic keylock function. If this function is activated, the keys will be automatically locked in 15 seconds from the last command. In order to deactivate or temporarily deact ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 21
19 Effect Adjust: T est Channel – This menu function allows the user to select each individual fixture channel and test it’s function independently from the control board. Lamp adjustment (manual control) – This function readies the fixture for lamp optimization in a simple single step procedure. This function will center the pan and tilt mot ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 22
20 external DMX controller . For detailed instructions on how to complete this task please see Section 12/ Page 39. Select program – This function allows the us er to select one of ten of the user defined built-in programs. This program is then accessed in “Function Mode” under “Program Run.” Edit program – This function allows t he use ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 23
21 INSTRUCTIONS ON USE: DMX channel´s functions and their values (16 DMX channels): DMX channel´s functions and their values (16 DMX channels): DMX channel´s functions and their values (16 DMX channels): DMX channel´s functions and their values (16 DMX channels): DMX channel´s functions and their values (16 DMX channels): Mode/Channel Mode/Cha ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 24
22 120-134 Rot. gobo 3 shake 135-149 Rot. gobo 4 shake 150-164 Rot. gobo 5 shake 165-179 Rot. gobo 6 shake 180-194 Rot. gobo 7 shake 195-209 Rot. gobo 8 shake 210-255 Rot. gobo wheel cont. rotation slow to fast 7 5 8 Rotating gobo index, rotating gobo r otation : 7 5 8 0-127 Gobo indexing 7 5 8 128-189 Forwards gobo rotation from fast to slow 7 ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 25
23 10 8 12 Dimmer intensity: 10 8 12 0-255 Intensity 0 to 100% 13 Fine Dimmer intensity: 13 0-255 Dimmer intensity fine 11 9 14 Frost: 11 9 14 0-127 Disable frost 11 9 14 128-255 Enable frost 12 10 15 Speed Pan/Tilt movement: 12 10 15 0-225 max to min speed 12 10 15 226-235 blackout by movement 12 10 15 236-245 blackout ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 26
24 some error in channel 1. If there are some errors on channel 1, channel 5, channel 6 at the same time, you may see the error message “Err channel is Color wheel”, “Err channel is Pan movement”, “Err channel is T ilt movement” flash repeated for 2 times, and then the fixture will generate a second reset. If the fixture remain error me ...
-
Elation PLATINUM BEAM 5R XM485-V1.0-NR - page 27
25 W e recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents. There are no serviceable parts inside the device except for the lamp. Please refer to the instructions under “Installation instructions”. Should you need any spare parts, please order genuine parts from your local dealer . TE ...
Hai una domanda su Elation PLATINUM BEAM 5R XM485-V1.0-NR?
Utilizza il modulo sottostante
Se non hai risolto il problema con Elation PLATINUM BEAM 5R XM485-V1.0-NR con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Elation PLATINUM BEAM 5R XM485-V1.0-NR è probabile che voglia condividere il modo di risolverlo.