Italiano dropdown-ico

Manuale per l’uso Samsung ML-7000

143 pagine 3.12 mb
Scarica

Vai alla pagina of 143

Summary
  • Samsung ML-7000 - page 1

    ML- 7000 Series LASER PRINTER User ’s Guide ...

  • Samsung ML-7000 - page 2

    ELECTRONICS Printed in Korea P/N: JC68-61021A Rev . 3.00 ...

  • Samsung ML-7000 - page 3

    C C o o p p y y r r i i g g h h t t The software described in this document is supplied under a license agr eement. The software may be used or copied only in accordance with the terms of this agr eement. It is against the law to copy the software on any medium except as specifically allowed in the license agreement. The pur chaser may make only on ...

  • Samsung ML-7000 - page 4

    5 Contents 2 C C o o n n t t e e n n t t s s Safety Precautions Features and Model Descriptions Setting up Your Printer Unpacking Y our Printer Items Supplied Front V iew Rear V iew Preparation Installing T oner Cartridge Connecting the Parallel Cable Cable Specifications Connecting the Parallel Cable Connecting the AC Power Cord Loading Paper into ...

  • Samsung ML-7000 - page 5

    Contents 3 32 33 33 34 35 35 36 37 38 39 40 41 42 42 43 44 45 49 52 55 55 56 58 58 59 60 61 62 62 63 65 66 Using Your Printer Overview Using Features in the Printer Driver W ith W indows 95/98/NT 4.0 W ith W indows 3.1 Using the Samsung 7000 Series Printer Driver Paper T ab Graphics T ab Finishing T ab Printer T ab Overlays T ab W atermarks T ab Us ...

  • Samsung ML-7000 - page 6

    Contents 4 Memory and Option Cards Overview Preparations - Understanding the Printer Control Boar d - Closing the Printer Cover Printer Memory - Installing Procedur e - Removing the Printer Memory Option Network Option Card(PortThr u) - Installing Procedur e Options 68 69 69 69 69 72 72 74 75 76 80 83 84 85 87 88 89 90 92 92 95 96 96 Caring for You ...

  • Samsung ML-7000 - page 7

    Contents 5 Memory and Option Cards Printing a document Using PS option in PC - Adding more Memory - Installing PS SIMM - Installing PS Driver - Selecting the Default Printer Printing a document using PS option in Macintosh - Adding more Memory - Installing PS SIMM - Installing Serial/LocalT alk Option Card - Connecting the LocalT alk Cable - Instal ...

  • Samsung ML-7000 - page 8

    Safety Precautions 6 Before using the printer , please r ead the instructions in this guide carefully and put the guide in a safe place close to the printer , so that it is available when you need it later . Please take the following precautions when using and maintaining your printer . ● Unplug the printer before cleaning it. Do Not use any liqu ...

  • Samsung ML-7000 - page 9

    Y our new Laser Printer is designed for use in an office envir onment, providing such advantages as : ● Printing both sides of paper ● High-quality , high-speed text and graphics printing ● V ast choice of paper types and sizes ● Full operating status and error messages on operator panel display ● On-screen feedback of the printing status ...

  • Samsung ML-7000 - page 10

    Getting Started Getting Started 8 ...

  • Samsung ML-7000 - page 11

    Setting Up your Printer 9 Unpacking Y our Printer Items Supplied When you start unpacking the box of your printer , you will find the following items in addition to your printer S S e e t t t t i i n n g g U U p p y y o o u u r r P P r r i i n n t t e e r r Power cord ● If you find that any of the above items are missing or damaged, contact your ...

  • Samsung ML-7000 - page 12

    Setting Up your Printer 10 Fr ont V iew The following illustration shows the front view of your printer and indicates the various main elements. T op output bin Operator panel Print prevention sensor (It prevents the printer from printing when 250 sheets of paper are piled up on the top output bin.) Paper level indicator Cassette (500-sheet, closed ...

  • Samsung ML-7000 - page 13

    Setting Up your Printer 11 Pr eparation During the storage and transport of your printer , adhesive tape is used to block some of the elements that may move or open unexpectedly and consequently be damaged. 1. Before connecting up your printer and starting to use it, you must 1. therefor e remove all the adhesive tapes, as illustrated in the figur ...

  • Samsung ML-7000 - page 14

    Setting Up your Printer 12 Installing T oner Cartridge T o install a toner cartridge in your printer proceed as follows. 1. Remove the toner cartridge from its packaging. 2. Open the top cover of the printer by pressing the button on right side of the printer . ● Do not remove the cartridge from its packaging until you are ready to use it. ● Do ...

  • Samsung ML-7000 - page 15

    Setting Up your Printer 13 3. Rotate the cartridge and gently shake it from side to side to distribute the toner evenly inside the cartridge. 4. Position the cartridge as shown with the arrow pointing into the printer . Slide the cartridge into the printer as far as it will go. 5. Close the top cover . ● If toner gets on your clothing, wipe it of ...

  • Samsung ML-7000 - page 16

    Setting Up your Printer 14 Connecting the Parallel Cable T o print fr om computer software, you need to connect your printer to your computer with a parallel interface cable. Cable Specifications (Not pr ovided) The parallel cable should be compatible with the Centronics R parallel interface and IEEE standard 1284. If you pur chase parallel cable, ...

  • Samsung ML-7000 - page 17

    Setting Up your Printer 15 3. Push the clip at each end of the connector down into the notches on the plug as shown. 4. Plug the other end of the cable into the appropriate parallel connector on your computer and tighten the screw . MIDI/GAME PHONE LINE LINE OUT LINE IN ...

  • Samsung ML-7000 - page 18

    1. Plug the appropriate end of the power cable supplied to the connector on the rear of the printer . 3. Power the printer on by pressing the power on/of f button. Connecting the AC Power Cord T o connect the printer to a power point, proceed as follows. 2. Plug the other end into a suitable power point 230V(220~240). Y ou will hear some movement i ...

  • Samsung ML-7000 - page 19

    Setting Up your Printer 17 Loading Paper into the Cassette Y our printer has a standar d Cassette that can hold up to 500 sheets of paper and a MP(Multi-Purpose) tray that can hold up to 100 sheets of paper , 10 envelopes or 10 index cards. Cassette T o load paper in the cassette, proceed as follows. 1. Pull the cassette completely out of the print ...

  • Samsung ML-7000 - page 20

    Setting Up your Printer 18 3. Lift the rear right guide and slide it to match the width of the paper . The paper sizes are indicated on the bottom of the cassette. 4. Squeeze the width guide, rear right guide and slide it to the far right side of the cassette. Width guide Printing side(down) Paper Limit Line Rear right guide 5. Place the paper agai ...

  • Samsung ML-7000 - page 21

    Setting Up your Printer 19 6. Squeeze the width guide and slide it to the left until it lightly rests against the edge of the paper . 7. Make sure the paper is set below the tab on the cassette. 8. Gently slide the cassette back into the printer . The printer automatically senses the size of paper loaded if the cassette is adjusted correctly . To l ...

  • Samsung ML-7000 - page 22

    Setting Up your Printer 20 1. Pull the MP tray towar ds you. 2. Slide the length guide out toward you. Loading Paper into the MP(Multi-Purpose) T ray MP tray pr ovides a convenient way to print envelopes, transparencies, or other type of media without having to unload the other tray . T o load paper in the MP tray , pr oceed as follows. ...

  • Samsung ML-7000 - page 23

    4. Place the paper against the side of the MP tray with the r ecommended print side face up and the top edge going in first toward the printer as shown. 5. Adjust the paper guide to the size of the paper inserted by pushing the guide. 3. Flex the sheets back and forth to loosen them, then fan them. ● Do not fold or crease the paper . ● Place th ...

  • Samsung ML-7000 - page 24

    Setting Up your Printer 22 T esting the Printer Print a configuration page to make sure the printer is operating corr ectly . 1. Make sure the printer is plugged in and the READY status message appears on the display . RE AD Y 0F F LN E TE S T ME N U S E L F TE S T 2. Press On Line. 3. Press Menu > or < Menu to enter the menus. 4. Press Menu ...

  • Samsung ML-7000 - page 25

    Setting Up your Printer 23 S S e e t t t t i i n n g g U U p p t t h h e e P P r r i i n n t t e e r r D D r r i i v v e e r r Overview The printer drivers provided on the CD must be installed to take full advantage of the printer Õs features. Printer drivers access the printer features and allow the computer to communicate with the printer . Prin ...

  • Samsung ML-7000 - page 26

    Setting Up your Printer 24 Installing the Driver Har dware Requir ements T o install and run the PCL printer driver , you must have the following minimum hardwar e configuration. ● PC-compatible 486 microcomputer or better ● 8MB of RAM for W indows 3.1 and 3.1 1 (16MB r ecommended for some applications) or 16MB for W indows 95/98, W indows NT 4 ...

  • Samsung ML-7000 - page 27

    Setting Up your Printer 25 1. Insert the CD into the CD-ROM drive. 2. T ype the user name and company . Click on the NEXT button. 3. Select the printer model which is connected to your computer(ML-7000 Series or QwikLaser 7000 Series). Click on the NEXT button. Then, proceed as follows. With Windows 95/98/NT 4.0 : 4. Select the printer driver to in ...

  • Samsung ML-7000 - page 28

    Setting Up your Printer 26 5. Select the desired language, and then click on the NEXT button in the Font Navigator dialogue box. 6. Follow the instructions on the scr een. 7. Select the directory to install Font Navigator . Click on the Finish button. 8. Click on the Ye s button, when asked to restart windows. If the printer driver is installed tog ...

  • Samsung ML-7000 - page 29

    Setting Up your Printer 27 In case of W in 95 1. Make sure the printer is plugged and connected to your computer . 2. T urn on the printer and start W indows on your PC. 3. W indows r ecognizes the printer , and ÔNew Har dware FoundÕ dialogue box is displayed. 4. Click on the OK button. 5. Insert CD into the CD-ROM drive, and click on the Browse ...

  • Samsung ML-7000 - page 30

    Setting Up the Printer Driver 28 The Run dialogue box appears. R R e e s s u u l l t t 1. Make sure the printer is plugged and connected to your computer . 2. T urn on the computer . 3. Insert the compact disk into the CD-ROM drive. 4. From program manager window , select Run from the file menu. With Windows 3.1 : 5. T ype d:(or e:) Setup.exe on t ...

  • Samsung ML-7000 - page 31

    Setting Up the Printer Driver 29 Selecting the Printer Default Printer After installing the printer driver Samsung 7000 Series PCLXL is selected automatically as the default printer . If you did not select this Laser printer as the default printer when you installed it, you must select it before attempting to print a document on it. Selection T o s ...

  • Samsung ML-7000 - page 32

    Setting Up the Printer Driver 30 Font Navigator Directory(FontNav) Font Navigator is a font manager for W indows 95/98, W indows NT(4.0), and W indows 3.1. It gives a quick and easy way to find fonts, install those fonts, and view and print font samples. Font Navigator is installed automatically when the printer driver is installed. If the printer ...

  • Samsung ML-7000 - page 33

    Operation 31 Operation ...

  • Samsung ML-7000 - page 34

    Using Y our Printer 32 U U s s i i n n g g Y Y o o u u r r P P r r i i n n t t e e r r Overview This chapter contains information about using features in the printer driver , using the printer operator panel, understanding operator panel menus, and using your printer . ● Using Features in the Printer Driver ● Using the Operator Panel ● Printe ...

  • Samsung ML-7000 - page 35

    Using Y our Printer 33 Using Features in the Printer Driver When you print from softwar e application, many of the printer Õs features ar e available from the printer driver . T o change the settings from a softwar e application, do the following way . W ith W indows 95/98/NT 4.0 1. Select Start-Settings-Printers from the windows task bar . 2. Dou ...

  • Samsung ML-7000 - page 36

    Using Y our Printer 34 W ith W indows 3.1 1. From Program Manager windows, double-click on the Control Panel icon within the Main Program gr oup. 2. Double click on the printers icon within the Control Panel W indows. 3. In the Installed Printers list, click on Samsung 7000 Series (PCLXL or PCL 5e) if it is not already highlighted. 4. Click on the ...

  • Samsung ML-7000 - page 37

    Using Y our Printer 35 Each tab of Samsung 7000 Series PCLXL is described as an example in this section. Paper T ab If you want to know more about each menu, click on the Help button . The help screen gives detailed infor mation about each menu. Orientation Choose Portrait or Landscape to select the default orientation of the printed page. Paper si ...

  • Samsung ML-7000 - page 38

    Using Y our Printer 36 If you want to know more about each menu, click on the Help button . The help screen gives detailed infor mation about each menu. Graphics T ab The settings on the Graphics tab allow you to fine tune your image quality and to balance print quality and print speed. Graphics Mode This setting can image the page in several diffe ...

  • Samsung ML-7000 - page 39

    Using Y our Printer 37 Finishing T ab Finish Mode This setting allows you to print multiple pages on one sheet of paper . Multiple Images Use the Multiple Images setting to print multiple page images on a single page. ● The pages per sheet itemÕs values are 1, 2, 4, 6, 9 and 16. For example, 2 means two page images are printed on one page. ● T ...

  • Samsung ML-7000 - page 40

    Using Y our Printer 38 Printer T ab Resolution Select from the available setting to set the maximum resolution for your print jobs. Printer Memory Select the value of the printer memory installed in the printer . After adding more memory , set the value of the printer memory . If you want to know more about each menu, click on the Help button . The ...

  • Samsung ML-7000 - page 41

    Using Y our Printer 39 Overlays T ab The Overlay is a graphic that is superimposed on your final output, usually in a lighter gray . Y ou can also create an overlay with your graphic. Overlays T o select a bitmap to be used as a graphic, enter the path to locate the bitmap file. Load Overlay Y ou can use an externally source file as an overlay . Cr ...

  • Samsung ML-7000 - page 42

    Using Y our Printer 40 W atermarks T ab A W atermark is text that is superimposed on your final output. Usually in a lighter gray you can create a watermark with your own text. Edit Use this dialog box to enter the text and layout of your watermark. Y ou can set the watermarkÕs font, size and darkness, as well as the angle and position on the page ...

  • Samsung ML-7000 - page 43

    Using Y our Printer 41 Using the Operator panel The operator panel, on the front right side of your printer , has a 2-line LCD(Liquid Crystal Display) and five buttons. Operator Panel Display Light Color Light State The Printer is... Green Orange On Off Blinking On Blinking Online Offline Processing information In Non-recoverable err or state ● S ...

  • Samsung ML-7000 - page 44

    Using Y our Printer 42 Operator Panel Menus A number of menus are available to make it easy for you to change printer settings. Some menus are displayed only if a specific option is installed in the printer . When you select a new setting from the operator panel, the asterisk( ❊ ) moves next to the selected setting to identify it as the current u ...

  • Samsung ML-7000 - page 45

    Using Y our Printer 43 Changing Printer Settings T o change an operator panel setting, proceed as follows. A value can be : ● A phrase or word that describes a setting ● A numerical value that you can increase or decrease ● An On or Off setting. 1. Make sure the ÔREADYÕ message appears on the display . 2. Press On Line 3. Press Menu until t ...

  • Samsung ML-7000 - page 46

    Using Y our Printer 44 Overview of Printer Menu Some menus are displayed only if a r equired option is installed. They are as follows. P APER MP SIZE COPIES ORIENT TRA Y T -MARGIN L-MARGIN DUPLEX AUTO CR QUALITY EMUL SWITCH LOCKTRA Y PWR SA VE AUTOCONT ECONO JAM RECV TONERLOW SR T MODE TIMEOUT DENSITY P AP .TYPE MENU CLR SMET DUP .TOP DUP .LEFT S-B ...

  • Samsung ML-7000 - page 47

    Using Y our Printer 45 PRINTING MENU Use the PRINTING MENU to define all settings relating to printer input and output, as well as the specific print materials you are using with your printer . PRINTING MENU Items Item V alues and Functions P APER MP SIZE Cassette Size A4(country specific) ; Factory Default LEGAL, A4, EXE, JIS B5, ISO B5, FOLIO Mp ...

  • Samsung ML-7000 - page 48

    Using Y our Printer 46 Landscape Portrait Item V alues and Functions COPIES ORIENT 1 to 999(1 ; Factory Default) The COPIES setting determines the number of copies printed for each page. The printer does not automatically collate the copies. For example, if you send three pages to print and set Copies to 2, the printer prints page1, page 1, page 2, ...

  • Samsung ML-7000 - page 49

    Using Y our Printer 47 AUTO(Factory Default) 1ST MP OPT(If the optional cassette is installed) MANUAL The TRA Y setting identifies the default paper tray . 1ST means that the printer feeds print material from Cassette unless it is empty or closed. MP means that the printer feeds print material from MP tray unless it is empty or closed Use the MANUA ...

  • Samsung ML-7000 - page 50

    Using Y our Printer 48 Item V alues and Functions L-MARGIN DUPLEX AUTO CR QUALITY 0.0 Ó ~ 9.9Ó The L-MARGIN menu item lets you select the left margin of the print materials OFF (Factory Default) LONG SHOR T The printer can automatically print on both sides of paper Use the OFF selection when printing of one side of a sheet of paper . For more inf ...

  • Samsung ML-7000 - page 51

    49 Using Y our Printer CONFIG MENU Use the CONFIG MENU to configure a variety of printer featur es. CONFIG MENU Items Item V alues and Functions EMUL PWR SA VE AUTOCONT AUTO (Factory Default) PCL PS II(If the PS option is installed) HEXDUMP Y ou can select the emulation for printing a document. OFF 15 30 (Factory Default) 45 60 The PWR SA VE menu i ...

  • Samsung ML-7000 - page 52

    Using Y our Printer 50 Item V alues and Functions ECONO JAM RECV TONERLOW OFF (Factory Default) ON The ECONO setting helps conserve the toner cartridge by controlling how much toner the printer uses for print job. Select OFF if toner conservation is not a concern. But this setting may affect the print quality of your job. OFF (Factory Default) ON W ...

  • Samsung ML-7000 - page 53

    Using Y our Printer 51 Item V alues and Functions SWITCH (If the optional cassette is installed) LOCKTRA Y (If the optional cassette is installed and the SWITCH menu item is set to on) ON (Factory Default) OFF The ON setting makes the printer supply the paper from another cassette when a cassette is empty . In case of the OFF setting, an error mess ...

  • Samsung ML-7000 - page 54

    Using Y our Printer 52 JOB MENU Use the JOB MENU to define all settings relating to print quality , as well as Menu clear . JOB MENU Items Item V alues and Functions SRT MODE (Samsung Resolution Enhancement T echnology) TIMEOUT DENSITY ENHANCE (Factory Default) NORMAL GRA Y Use the printer Õs SR T(Samsung Resolution enhancement T echnology) settin ...

  • Samsung ML-7000 - page 55

    Using Y our Printer 53 Item V alues and Functions P AP .TYPE MENU CLR SMET (Samsung Memory Enhancement T echnology) NORMAL (Factory Default) THICK WET TRANSP . The P AP .TYPE setting lets you specify the type of print material installed in each tray Select NORMAL if the printer material is plain paper . Select THICK if the printer material is thick ...

  • Samsung ML-7000 - page 56

    Using Y our Printer 54 Item V alues and Functions DUP .TOP DUP .LEFT S-BIND L-BIND FUSER CLEAN 5.0 (Factory Default) 0~9.9mm (In increments of 0.1) This item lets you select the top margin of the print materials when the Duplex menu item is set to Long. 5.0 (Factory Default) 0~9.9mm (In increments of 0.1) This item lets you select the left margin o ...

  • Samsung ML-7000 - page 57

    Using Y our Printer 55 I/O MENU This menu is only available if the Serial/LocalT alk option card is installed in your printer . I/O MENU Items Item V alues and Functions BAUDRA TE ROBU.XON This setting lets you select the rate at which data is being sent to or from your computer . 300~115200 9600 (Factory Default) ON(Factory Default) OFF TEST MENU ...

  • Samsung ML-7000 - page 58

    Using Y our Printer 56 PCL MENU Use the PCL MENU to change printer settings that only affect jobs printed using the PCL emulation printer language. PCL MENU Items Item V alues and Functions FONTLIST TYPEF ACE SYMBOL LINES Y ou can print a font sample list showing all the fonts available for PCL emulation. PCL 1 ~ PCL 54 PCL 1 (Factory Default) ROMA ...

  • Samsung ML-7000 - page 59

    Using Y our Printer 57 Item V alues and Functions PITCH PT .SIZE COURIER 0.44 ~ 99.99 10 (Factory Default) If you chose a scalable monospaced font, you can select the font pitch. PITCH refers to the number of fixed - space charac- ters in a horizontal inch of type. Y ou can select from 0.44 to 99.99 characters per inch in increments of 0.01 cpi. Y ...

  • Samsung ML-7000 - page 60

    Using Y our Printer 58 Printing Both Sides of Paper The printer can automatically print on both sides of paper by setting the Printing Menu or Paper tab of Samsung 7000 Series PCLXL Driver . T o print both sides of paper , proceed as follows : 1. Open the document to be printed in appropriate application. 2. Click on the Print button. 3. Click on P ...

  • Samsung ML-7000 - page 61

    Using Y our Printer 59 1. Make sure the READY message appears on the display . 2. Press On Line. 3. Press Menu until you see PRINTING MENU . 4. Press Item until you see DUPLEX . 5. Press V alue until the setting you need appears on the display . (For more information, see page 48.) 6. Press Enter to save the selection. The ÔOFFLINEÕ message appea ...

  • Samsung ML-7000 - page 62

    Using Y our Printer 60 Paper Orientation for Printing both sides of Paper The printer prints the second sides of paper first, so paper such as letterhead and pr eprinted paper needs to be oriented as illustrated in the figure below . For MP tray , load the first side facing down and the top toward you. ● Set the source item in the pr operties dia ...

  • Samsung ML-7000 - page 63

    Using Y our Printer 61 Sam sung T o print from the MP T ray , proceed as follows. 1. Select Manual as the paper source. ● Set the source item in the pr operties dialogue box to Manual ● Y ou can select Manual as the paper source by setting the T ray item of the operator panel menu. 2. Print your document. 3. Place a sheet of paper in the MP tra ...

  • Samsung ML-7000 - page 64

    Using Y our Printer 62 Printing Special Paper Special paper includes letterhead, pr epunched, envelopes, labels, and transparencies. Letter head / Prepunched Paper When printing letterhead, pr epunched paper , it is important to load the trays with the correct orientation. For MP tray , load the paper with the side-to-be-printed facing up, and the ...

  • Samsung ML-7000 - page 65

    Using Y our Printer 63 1. Open the MP tray . Pull out the extension. Envelopes Many types of envelopes can be printed from MP tray . The types of envelopes are COM-10, MONARCH, DL, C5 and C6(60~90g/m 2 ) The printer will automatically feed up to 10 envelopes. Printing performance depends on the construction of the envelope. Printing information ● ...

  • Samsung ML-7000 - page 66

    Using Y our Printer 64 2. Load up to 10 envelopes in the left side of MP tray with the side-to-be printed facing up, and the postage-end toward the printer . Samsung 3. Adjust the guide to touch the envelope stack without bending the envelopes. 4. Set the source item in the pr operties dialogue box to Manual or MP . Samsung Do not use an envelope c ...

  • Samsung ML-7000 - page 67

    Using Y our Printer 65 Label Labels automatically feed from the MP tray or the other trays. Label guidelines Make sure that labels meet the specifications for the tray you use. ● Use full label sheet. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. ● The adhesive material should be stable at 400 O F(205 O ...

  • Samsung ML-7000 - page 68

    Using Y our Printer 66 ● For MP tray , load the transparencies with side-to-be-printed facing up, and the top toward the printer . Print a stack of 30 transparencies from MP tray . T ransparencies T ransparencies automatically feed fr om the MP tray or the other trays. Some brand of transparencies may r equire manual feeding. The MP tray is a tra ...

  • Samsung ML-7000 - page 69

    T roubleshooting 67 T r oubleshooting ...

  • Samsung ML-7000 - page 70

    Caring for Y our Printer 68 C C a a r r i i n n g g f f o o r r Y Y o o u u r r P P r r i i n n t t e e r r Overview This chapter provides information about maintaining your printer . ● Maintaining the T oner Cartridge. ● Cleaning the Printer . ● Cleaning the LSU ...

  • Samsung ML-7000 - page 71

    Caring for Y our Printer 69 Maintaining the T oner Cartridge T oner Cartridge Storage Do not remove the toner cartridge fr om its package until you are r eady to use it. To prevent damage to toner cartridge, do not expose it to light. T oner Cartridge Life The life of the toner cartridge depends on the amount of toner that print jobs requir e. When ...

  • Samsung ML-7000 - page 72

    Caring for Y our Printer 70 Procedure T o distribute the toner , proceed as follows. 1. Open the top cover by pushing the button on the side of the printer . 2. Remove the toner cartridge from the printer . ...

  • Samsung ML-7000 - page 73

    Caring for Y our Printer 71 3. Rotate the toner cartridge and gently shake it from side to side to distribute the toner . 4. Reinsert the toner cartridge into the printer and close the top cover . If the print remains light, install a new toner cartridge. ...

  • Samsung ML-7000 - page 74

    Caring for Y our Printer 72 2. Remove the paper from MP tray . 1. Check that the printer is powered of f and disconnected from power point. 3. Open the top cover and remove the toner cartridge. Cleaning the Printer T o maintain print quality , you should clean the printer . ● Never use alcohol or solvent based cleaning agents to clean the printer ...

  • Samsung ML-7000 - page 75

    Caring for Y our Printer 73 5. If the outer casing or the paper feed guides are dirty , clean them with 3. a soft, clean cloth, slightly dampened with a gentle detergent. 6. Clean the inside of the printer with a damp cloth 4. Use a soft cloth to remove any dust. 7. Replace the toner cartridge, close the top cover , plug in the power cord, and turn ...

  • Samsung ML-7000 - page 76

    Caring for Y our Printer 74 2. Pull up on the LSU cleaner and put it on the LSU. 1. Open the top cover and remove the toner cartridge. 3. Slide the LSU cleaner horizontally across a track on the top of the LSU. Cleaning LSU(Laser Scanning Unit) T o obtain high quality from your printer , clean the LSU when characters have lines running thr ough the ...

  • Samsung ML-7000 - page 77

    Problem Solving 75 P P r r o o b b l l e e m m S S o o l l v v i i n n g g Overview Intr oduction Most printer problems can be easily solved, by going thr ough simple check lists and test. T o help you locate the check list applicable to the type of problem that you ar e encountering. The most frequent pr oblems have been divided into several categ ...

  • Samsung ML-7000 - page 78

    Problem Solving 76 Clearing Paper Jams If the printer Õs operator panel displays a paper jam message, look for paper in the locations indicated in the figure below , then perform the procedur e for clearing the paper jam. Paper Jam Locations Be very careful not to tear the paper , when clearing paper jams. If a small piece of paper is left in the ...

  • Samsung ML-7000 - page 79

    Problem Solving 77 Problem Solution ‘P APER JAM 0 ’ message appears on the LCD 1. Slide the cassette out of the printer , and remove any damaged paper from the tray . 2. Make sure the paper is below the tab on the guide. 3. Replace the cassette. 4. Open and close the top cover to clear the paper jam message. If the edge of paper is visible in t ...

  • Samsung ML-7000 - page 80

    Problem Solving 78 The paper jam locations for both sides printing are different from those of nor mal printing. Refer to page 76. Problem Solution ‘P APER JAM 1’ or ‘P APER JAM 2’ messages appear on the LCD Check 1 ● Open and close the top cover The paper comes out of the printer . Check 2 (JAM 1) ● Open the top cover and remove the to ...

  • Samsung ML-7000 - page 81

    Problem Solving 79 Problem Solution ‘DUPLEX JAM 1’ or ‘DUPLEX JAM 2’ messages appear on the LCD Check 1 (DUPLEX JAM 1) ● Open the rear cover ● Grasp both sides of the paper , and slowly pull the paper out of the printer . Check 2 (DUPLEX JAM 2) ● Pull the cassette completely out of the printer . ● Pull down the metal plate inside of ...

  • Samsung ML-7000 - page 82

    Problem Solving 80 Error Messages The following table explains messages that might display on the printer operator panel. A cover is open. ● Close the cover . CO V ER OP E N The printer is running out of toner . Purchase a new cartridge and r eplace the toner cartridge. To n er RE A DY Lo w The toner is low . The T onerLow menu item is set to STO ...

  • Samsung ML-7000 - page 83

    Problem Solving 81 Press Continue key . MA N UA L LO AD Load the paper into the MP tray . MA N UA L EM PT Y An internal error has occurr ed. ● T urn the printer off, and then turn the printer on. ● Contact your local dealer or after-sales service. IN T ER N A L ER RO R Data which was too complex was sent to the printer . ● If this message per ...

  • Samsung ML-7000 - page 84

    Problem Solving 82 The printer detects a serial interface error . ● Set the same Baudrate. SE R IA L ER R OR There is not enough memory in the printer . ● Y ou might want to add more memory to the printer . ● Check that the SMET menu item is set to ON. ME M OR Y OV E RF L O W Message Meaning and Required Action ...

  • Samsung ML-7000 - page 85

    Problem Solving 83 ● Check the power cord connections ● Check that the power supplied to the printer is steady and meets printer specifications. ● T urn the printer off, and then turn the printer on. 1. Select ST AR T -Settings-Printers from W indow 95 task bar .(See page 33) 2. Click on the PCLXL, PCL5e or PS printer icon. 3. Select File-Def ...

  • Samsung ML-7000 - page 86

    Problem Solving 84 ● Distribute the toner in toner cartridge.(See page 69) ● Adjust the ÔDensityÕ menu item setting.(See page 52) ● Clean the inside of the printer .(See page 72.) ● Print a few more pages to see if the pr oblem will correct itself. ● Clean the inside of the printer .(See page 72.) ● Check the paper type and quality . ...

  • Samsung ML-7000 - page 87

    Problem Solving 85 ● Check that the PS is available for printing, and the total memory is installed more than or equal to 12MB by printing selftest page. - If PS is not available for printing, install the PS SIMM. (For information about installing procedur e of the PS SIMM, see page 99) - If the total memory is lower than 12MB, Install the 8MB SI ...

  • Samsung ML-7000 - page 88

    Options 86 Options ...

  • Samsung ML-7000 - page 89

    Memory and Option Cards 87 M M e e m m o o r r y y a a n n d d O O p p t t i i o o n n C C a a r r d d s s Overview Y ou can customize your printer memory and connectivity . This chapter provides instr uctions for installing. T urn to the appropriate section for instr uctions on installing the option. Option Go to page... ● Printer Memory ● Net ...

  • Samsung ML-7000 - page 90

    Memory and Option Cards 88 2. Disconnect all cables from the back of the printer . 3. Remove the printer cover . a. Open the rear cover . b. Remove the two screws fr om the back of the printer . Save the screws. c. Grasp the cover(as illustrated) and pull it firmly toward the r ear of the printer until it stops. d. Remove the cover from the printer ...

  • Samsung ML-7000 - page 91

    Memory and Option Cards 89 Network Card Connector Serial/LocalT alk Connector Printer Memory Connector ROM SIMM Connector Understanding the Printer Contr ol Board If the printer cover is opened, you can see the printer control boar d as below . e. Remove the five screws fr om the metal plate covering the control boar d. f. Remove the plate. ...

  • Samsung ML-7000 - page 92

    Memory and Option Cards 90 1. Close the metal plate and tighten all the screws. 2. Set the bottom of the cover onto the printer Make sure the bottom tabs on the cover fit into the corresponding slots in the printer . Rotate the cover up towards the printer . Slide the cover toward the fr ont of the printer until it clicks into place. Closing the Pr ...

  • Samsung ML-7000 - page 93

    Memory and Option Cards 91 3. Gently tighten all the screws. 4. Reconnect any interface cables and the power cord. ...

  • Samsung ML-7000 - page 94

    Memory and Option Cards 92 Printer Memory The printer memory option increases the printer dynamic random access memory(DRAM). Y our printer was shipped with 4MB of standard printer Memory . Y ou can install two printer memory options in your printer . Printer memory upgrade options available are 4, 8, 16 or 32MB. DRAM SIMM Features for Upgrade - Sp ...

  • Samsung ML-7000 - page 95

    Memory and Option Cards 93 2. Unpack the memory option. Notch Connection points 3. Hold the memory option with the connection points pointing toward the connector and position the notch as shown. Insert the memory option all the way into the connector at a 30 O angle, and rotate it left until it snaps into place. Avoid touching the connection point ...

  • Samsung ML-7000 - page 96

    Memory and Option Cards 94 4. Make sure both metal clips on the connector ar e fastened, and the two pins on each of the connector are pushed thr ough the holes on the memory option. 5. Continue with Ôclosing the printer cover Õ on page 90. 6. Set the printer memory item on the printer tab of the properties dialogue box to the value of the added ...

  • Samsung ML-7000 - page 97

    Memory and Option Cards 95 1. Push the metal clips at each end of the connector away from memory option. Removing the Printer Memory Option Complete the following steps if you need to remove a printer memory option before you install a new one. 2. Rotate the memory option right to a 30 O angle and gently pull it out of the connector as shown. 3. Pl ...

  • Samsung ML-7000 - page 98

    Memory and Option Cards 96 Network Option Card(PortThru) The network option card lets you connect the printer to a local ar ea network(LAN). Y ou can install one network option card in your printer . 1. Locate the card connector on the printer contr ol board. Network card connector Installing Pr ocedure Before you install the network option car d, ...

  • Samsung ML-7000 - page 99

    Memory and Option Cards 97 2. Remove the two screws fr om the metal plate covering the opening for cable connector . Remove the plate. 4. Unpack the option card. 7. Gently tighten the screws to secur e the card to the system boar d. 8. Continue with Ôclosing the printer cover Õ on page 90. 5. Align the connector on the card with the connector on ...

  • Samsung ML-7000 - page 100

    Memory and Option Cards 98 Connecting to Ethernet 10 Base 2 Network Attach your ThinLAN cable to the BNC ÔTÕ connector . Connecting to Ethernet 10 Base-T Network Connect a twisted-pair network cable to the RJ-45 port. 9. Install the network printer driver(called SyncThru) pr ovided on the CD-ROM. See Network Printer Card User Õs Guide for instal ...

  • Samsung ML-7000 - page 101

    Memory and Option Cards 99 Printing a document using PS Option in PC PS Option Items Supplied : ● PS SIMM ● 8MB RAM SIMM ● PS Driver Diskette ● PS Option Guide T o print, complete the following three sections in or der : ● Adding more memory ● Installing PS SIMM ● Install PS driver & Selecting the default printer Adding mor e Memo ...

  • Samsung ML-7000 - page 102

    Memory and Option Cards 100 Installing PS Driver This can be accomplished in two ways. 1. Using CD-ROM. Using CD-ROM 1. Insert CD in a CD-ROM drive. 2. Copy two files from PSEnglishOthersW in 95_98 to any folder . 3. Select Start-Settings-Printers from the windows task bar . 4. Double click the Add Printer icon, and click on the Next button. 2. ...

  • Samsung ML-7000 - page 103

    Memory and Option Cards 101 5. Click on the Next button. 6. Click on the Have Disk button, and click on the Browse . Select any folder designated in step 2. When the name of printer is displayed, click on the next button. 7. Click on the Next button. ...

  • Samsung ML-7000 - page 104

    Memory and Option Cards 102 8. Y ou are asked whether the printer is to be declared as the default printer . 9. Y ou can determine whether the printer prints the test page. ● The computer starts to install the driver , and the following dialog box is displayed. ...

  • Samsung ML-7000 - page 105

    Memory and Option Cards 103 1 1. Insert the original CD for windows. Select the CD-ROM drive, then select W in 95(or W in 98) folder . Click on the OK button. 10. The message box of ÔInsert the disk labeled windows 95 CD-ROM or windows 95 Disk XXÕ appears. 12. The installation is completed. In case of windows NT 4.0, the installation is similar t ...

  • Samsung ML-7000 - page 106

    Memory and Option Cards 104 Using the Diskette 1. Select Start-Settings-Printers from the windows task bar . 2. Double click the Add Printer icon, then click on the Next button. 3. Choose Local or Network , then click on the Next button. 4. Click on the Have Disk button. Insert the driver diskette into the disk drive and select it (i.e: A: ) 5. Se ...

  • Samsung ML-7000 - page 107

    Memory and Option Cards 105 Selecting the Default Printer 1. Start windows on your pc. 2. Select Start-Settings-Printers from the windows 95 task bar . 3. Double click the SAMSUNG 7000 Series PS printer icon. 4. Select File-Default Printer . 5. Print the document on your Samsung 7000 series. ...

  • Samsung ML-7000 - page 108

    Memory and Option Cards 106 T o set the PS driver features, proceed as follows : 1. Double- click on the PS driver icon. 2. Select Printer - Properties . 3. Select the requir ed options. ...

  • Samsung ML-7000 - page 109

    Memory and Option Cards 107 Printing a document using PS Option in Macintosh T o print, complete the following five sections in order : ● Adding more Memory ● Installing PS SIMM ● Installing Serial/LocalT alk Option Car d ● Connecting the LocalT alk Cable ● Installing the PS Driver Adding mor e Memory For information about adding more mem ...

  • Samsung ML-7000 - page 110

    Memory and Option Cards 108 Installing Serial/LocalT alk Option Card The Serial/LocalT alk option card lets you connect your printer to : ● A LocalT alk network ● Serial interface 2. Remove the one screw fr om the metal plate covering the opening for cable connector . 1. Locate the Serial/LocalT alk connector on the printer control boar d. Seri ...

  • Samsung ML-7000 - page 111

    Memory and Option Cards 109 6. Push the card firmly into the connector until it is completely in place. 7. Continue with ÔClosing the printer cover Õ on page 90. The two connectors should fit snugly together . R R e e s s u u l l t t 3. Remove the plate. 4. Insert the Serial/LocalT alk option card into the option car d slot. 5. Align the connecto ...

  • Samsung ML-7000 - page 112

    Memory and Option Cards 110 Connecting the LocalT alk Cable Connect the printer to your macintosh using a LocalT alk cable. Installing the PS Driver Make sure the ÔREADYÕ message appears on the operator panel display . 1. If necessary press the power button on the macintosh computer . 2. Insert CD in a CD-ROM drive or insert the diskette in the d ...

  • Samsung ML-7000 - page 113

    Memory and Option Cards 111 The diskette included in your PS option contains the PPD file for Macintosh. If you do not have a CD-ROM drive or lost CD, use the diskette. ● Keep the original CD-ROM and diskette in a safe place. This step appears on some driver versions. 7. Click on the Setup button. 8. Click on the Auto Setup button. ● The ML-700 ...

  • Samsung ML-7000 - page 114

    Infrared Adapter 112 I I n n f f r r a a r r e e d d A A d d a a p p t t e e r r Overview Y ou can use a infrar ed adapter to print remotely fr om an IrDA-Compatible computer equipped with an infrared port. The infrared port is compliant with the specifications established by the Infrared Data Association(IrDA). The infrared port operates transmitt ...

  • Samsung ML-7000 - page 115

    Infrared Adapter 113 4. Reconnect the power cord. 3. Plug the adapter cable into the infrared port. The green light on the infrared adapter comes on when the printer is plugged in. R R e e s s u u l l t t Installing Pr ocedure 1. Make sure the printer power cor d is unplugged. 2. Locate the infrared port on the back of your printer . ...

  • Samsung ML-7000 - page 116

    Infrared Adapter 114 1. T o print with infrared port, you should install infrar ed port driver on your computer . ● If you do not have the driver , please ask to your PC manufacturer . ● Y ou can download infrared driver of W indows 95 from the internet with no charge.(http://www .microsoft.com) 2. Aim the computer infrared port at the infrar e ...

  • Samsung ML-7000 - page 117

    Optional Cassette 115 O O p p t t i i o o n n a a l l C C a a s s s s e e t t t t e e Overview Y ou can install an optional cassette. Complete the following steps before you install the optional cassette. ● Unplug the printer power cord. ● Disconnect all cables from the back of the printer ...

  • Samsung ML-7000 - page 118

    Optional Cassette 116 2. Reconnect all cables to the back of the printer . 3. Reconnect the power cord to the printer . 4. Make sure the ÔREADYÕ message appears on the operator panel display . Installing Pr ocedure 1. Carefully place the printer on top of the optional cassette unit. ● Make sure the connector is pr operly inserted. ...

  • Samsung ML-7000 - page 119

    Optional Cassette 117 Loading the Plain Paper into the Option Cassette Y our printer has an optional cassette that can hold up to 500 sheets of papers or 40 envelopes. T o load paper in the optional cassette, proceed as follows. 1. Pull the cassette completely out of the printer . 2. Press down on the bottom plate to lock it into position. To load ...

  • Samsung ML-7000 - page 120

    Optional Cassette 118 3. Squeeze and lift the length guide and slide it to the desired paper size until it click into place. 4. Lift the width guide on the paper guide it to the desired paper size until it click into place. The paper size is indicated on the bottom of the optional cassette. ...

  • Samsung ML-7000 - page 121

    Optional Cassette 119 5. Squeeze the width guide and slide it to the for right side of the cassette. 6. Place the paper against the left of the rear paper guide. 7. Squeeze the width guide and slide it to the right and left until it touches the edge of the paper . ● Do not fold or crease the paper . ● This mark indicates the height of paper loa ...

  • Samsung ML-7000 - page 122

    Optional Cassette 120 Loading the envelopes into the Option Cassette 1 Lift the lever on the left side of the cassette. 2 Press down on the bottom plate to lock it into position. 3 Left the width guide and slide it to the envelope size indicated on the bottom. 4 Lift the length guide and slide it to the envelope size indicated on the bottom. 5 Plac ...

  • Samsung ML-7000 - page 123

    Optional Cassette 121 Paper Sour ce Selection Use PCL driver to select the tray you wish to print. T o select Paper Source in PCL properties dialogue box. 1. Select Start-Settings-Printers from the windows 95 task bar . 2. Click on the Samsung 7000 Series PCLXL or PCL5e icon. 3. Select Files-Properties . 4. Click on the Paper tab. 5. Set the source ...

  • Samsung ML-7000 - page 124

    Optional Cassette 122 1. Press On Line. 0F F LN E PR ME N U NT N G 2. Press the Menu > or < buttons one or mor e times until ÔPrinting MenuÕ is displayed. TR AU T 0 Y A 3. Press the Item < or > buttons one or mor e times until ÔT rayÕ appears on the display . TR 0P T Y A 4. Press the V alue + or - buttons one or more times to select ...

  • Samsung ML-7000 - page 125

    T echnical Specifications 123 T echnical Specifications ...

  • Samsung ML-7000 - page 126

    T echnical Specifications 124 Paper specifications Acceptable paper size for all trays The following table gives details about the print material you can load in each of the printer cassettes. A4 LETTER FOLIO(LEGAL 13Ó) LEGAL(LEGAL 14Ó) EXECUTIVE ST A TEMENT ISO B5 JIS B5 A5 A6 ENVELOPE - COM-10 - MONARCH - DL - C5 - C6 TRANSP ARENCY - A4 - LETTE ...

  • Samsung ML-7000 - page 127

    T echnical Specifications 125 Supported T ypes of Paper The printer supports the following types of paper : Guidelines for Using Paper Make sure the paper is good quality ● Plain ● Letterhead ● Bond ● Rough ● Prepunched ● Preprinted ● Color ● Recycled ● T ransparency ● Labels ● Card Stock Labels T o avoid damaging the printer ...

  • Samsung ML-7000 - page 128

    T echnical Specifications 126 Printer Specifications Contr oller Power PC, 100MHZ ● Default : PCL6 ● Option : PS II ● 4MB Standard ● Max up to 68MB ● PS : 12MB Standard ● IEEE 1284 B type ● Option : Serial RS-232C/LocalT alk Infrared Adapter Connector Network 45 Scalable font, 1 Bitmap ● Ethernet ● 10 base T ● SNMP in MIB ● TC ...

  • Samsung ML-7000 - page 129

    T echnical Specifications 127 Engine 16 PPM 600 DPI + SR T Eletrophotography Non-mag monocomponent/contact Less than 60 secs Less than 13 secs 472 ✕ 442 ✕ 301(W ✕ D ✕ H)mm Less than 16.5kg 350W Printing A vg/ Max 34W printing sleep Printing : 50dB Standby : 36dB Sleep : Background noise 8000 pages A vg at 5% coverage In duplex mode, less th ...

  • Samsung ML-7000 - page 130

    T echnical Specifications 128 Paper Handling 500 sheets - Standard Cassette 500 sheets(40 envelopes) - Option Cassette 250 sheets Facedown 100 sheets(10 envelopes) ● 1st T ray : A4, L TR, Folio, Legal, Exec, ISO B5, JIS B5 (16~24lbs) ● MP T ray : A4, L TR, Folio, Legal, Exec, Statement, ISO B5, JIS B5, A5, A6, OHP , Label, COM-10, MON, DL, C5, ...

  • Samsung ML-7000 - page 131

    Notices 129 N N o o t t i i c c e e s s W ithout a Network Card Installed EC DECLARA TION OF CONFORMITY We , SAMSUNG ELECTRONICS CO.,L TD #259, Gong Dan-Dong, Gumi-City , Kyung Buk, Korea declare sole r esponsibility that the ML-7000, ML-7000P Laser Printer meets the intent of Directive 89/336/EEC for Electr omagnetic Compatibility and Low V oltage ...

  • Samsung ML-7000 - page 132

    Notices 130 W ith a Network Card Installed EC DECLARA TION OF CONFORMITY We , SAMSUNG ELECTRONICS CO.,L TD #259, Gong Dan-Dong, Gumi-City , Kyung Buk, Korea declare sole r esponsibility that the ML-7000N Laser Printer meets the intent of Directive 89/336/EEC for Electr omagnetic Compatibility and Low V oltage Directive 73/23/EEC. Compliance was dem ...

  • Samsung ML-7000 - page 133

    Notices 131 The printer is certified in the U.S. to conform to the r equirements of DHHS 21 CFR , Chapter1 Subchapter J for Class I(1) laser pr oducts, and elsewhere is certified as a Class I laser product conforming to the r equir ements of IEC 825. Class I laser products ar e not considered to be hazar dous. The laser system and printer are desig ...

  • Samsung ML-7000 - page 134

    Notices 132 CAUTION - INVISIBLE LASER RADIA TION WHEN THIS COVER IS OPEN . DO NOT OPEN THIS COVER VORSICHT - UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEOFFENT . NICHT DEM STRAHL AUSSETZEN. A TTENTION - RA YONNEMENT LASER INVISIBLE EN CAS D’OUVERTURE. EXPOSITION DANGEREUSE AU F AISCEAU. A TTENZIONE - RADIAZIONE LASER INVISIBLE IN CASO DI APERTUR ...

  • Samsung ML-7000 - page 135

    Notices 133 Safety and Regulatory Listing for this printer . S S A A F F E E T T Y Y I I N N F F O O R R M M A A T T I I O O N N PRODUCT SAFETY USA & CANADA Evaluated by UL according to UL 1950 and CSA C22.2 No. 950 for C-UL EEC(Europe) IEC 60950/EN 60950(TUV GS Certification) CB IEC 60950 LASER SAFETY EEC(Europe) HD 194. & EN 60825 USA 21 ...

  • Samsung ML-7000 - page 136

    Index 134 I I n n d d e e x x 4MB RAM 8MB RAM 16PPM 600dpi 500-Sheet cassette 250 Sheets of paper 100 Sheets of paper 10 envelopes 10 index cards 7 99 7 7 17 10 17 17 17 Numerics About Adhesive tape AUTO CR AUTOCONT 35 11 48 49 A BAUD RA TE BNC port 55 96 B Cassette Cassette size CD CD-Rom drive Config menu Copies COURIER COVER OPEN 17 45 23 25 49 ...

  • Samsung ML-7000 - page 137

    Index 135 ECONO Empty manual EMUL Enter/Cancel button Envelopes Error message Ethernet 10 Base 2 Ethernet 10 Base-T 50 81 49 42 63 80 98 98 E Halftoning Hardware Requirements Help button 36 24 42 H Infrared Adapter ● Installing ● Printing Infrared port INTERNAL ERROR I/O menu IrDA Item button Items Supplied 11 3 11 4 11 3 81 55 11 2 42 9 I JAM. ...

  • Samsung ML-7000 - page 138

    Index 136 I I n n d d e e x x Macintosh Memory Overflow MENU CLR Menu button ML-7000 ML-7000P ML-7000N MP size MP tray MP tray size Multiple Images 107 82 53 42 7 7 7 45 20 45 37 M Label LAN Landscape Legal Length guide Lever Light color ● Green ● Orange LINES L-MARGIN LocalT alk cable LOCKTRA Y LSU cleaner 65 96 46 19 20 19 41 56 48 11 0 51 74 ...

  • Samsung ML-7000 - page 139

    Index 137 OFFLINE On line Online/Continue button Operator panel Option tray size Optional Cassette ● Installing ● Loading the Paper ORIENT Orientation Overlays tab ● Creat Overlay ● Load Overlay ● Overlays ● Selected Overlay Status OVERRUN 43 43 42 41 45 11 6 11 7 46 35 39 81 O P AP .TYPE P APER Paper jam ● Location ● Paper Jam 0 ? ...

  • Samsung ML-7000 - page 140

    Index 138 I I n n d d e e x x QUALITY 48 Q 43 80 17 18 10 38 96 55 89 R READY status message READY T onerLow Rear paper guide Rear right guide Rear view Resolution RJ-45 Port ROBU-XON Rom SIMM Connector Power switch PPD file Print prevention sensor Printer Control Board Printer driver ● PCL 5e ● PS ● PCL XL ● Font Navigator ● SyncThru Pri ...

  • Samsung ML-7000 - page 141

    Index 139 SELFTEST Selection SERIAl ERROR Serial/LocalT alk connector Serial/Localtalk Option Card Setting up Sharing tab SM(Status Monitor) SMET Software requirements Sources SRT MODE SWITCH SYMBOL SyncThru 22 29 82 89 108 23 34 29 53 24 35 52 51 56 23 S T -MARGIN TEST MENU T esting the printer TIMEOUT T oner cartridge ● Installing ● Maintaini ...

  • Samsung ML-7000 - page 142

    Index 140 Uninstall Utility Unpacking your Printer 28 9 U V alue button 42 V W atermarks tab ● W atermark ● Edit Width guide Windows 95 Windows 98 Windows NT 4.0 Windows 3.1 40 17 25/27 25/27 25 28 W I I n n d d e e x x ...

  • Samsung ML-7000 - page 143

    Installing the Cleaning Felt The cleaning felt is used to prevent the pollution of the pr essure r oller . 2 . Pull the green grip towar ds you. 1 . Open the rear cover . 4 . Put the cleaning felt into place as illustrated in the figure below . 3 . Unpack the cleaning felt. 5 . Pull the green grip lightly to r eturn to the original position. 6 . Cl ...

Fabbricante Samsung Categoria Printer

I documenti che otteniamo dal fabbricante del dispositivoSamsung ML-7000 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Samsung
- manuali per l’uso ML-7000
- schede prodotto Samsung
- opuscoli
- o etichette energetiche Samsung ML-7000
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Samsung ML-7000.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Samsung ML-7000, manuali di manutenzione, brevi manuali o manuali utente Samsung ML-7000. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Samsung ML-7000.

Manuali per l’uso simili

Manuale completo del dispositivo Samsung ML-7000, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Samsung ML-7000 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Samsung ML-7000.

Il manuale per l’uso completo Samsung, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Samsung ML-7000 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Samsung ML-7000, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Samsung ML-7000 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Samsung ML-7000 - che ci dovrebbe aiutare nei primi passi durante l'uso Samsung ML-7000
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Samsung ML-7000
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Samsung ML-7000 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Samsung ML-7000?

Utilizza il modulo sottostante

Se non hai risolto il problema con Samsung ML-7000 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Samsung ML-7000 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)