-
Sony KL-W9000 - page 1
CHASSIS MODEL MODEL SERVICE MANUAL MICROFILM CHASSIS No. CHASSIS No. COMMANDER DEST. COMMANDER DEST. LCD PROJECTION DATA MONITOR 37 * Please file according to model size... 50 LJ-2T KL-W9000 KL-W9000 KL-W7000 KL-W7000 KL-W7000 KL-W9000 RM-Y980 SCC-N56B-A SCC-N56B-A RM-Y980 RM-Y980 US Canadian RM-Y980 RM-Y980 US Canadian SCC-N56A-A SCC-N56A-A ...
-
Sony KL-W9000 - page 2
KL-W7000/W9000 RM-Y980 – 2 – Specifications Acceptable signal NTSC video signal, RGB signal (For details, see page 9 .) Projection system 3 LCD panels, 1 lens projection system LCD panel 1.35-inch TFT LCD panel Approx. 1.54 million dots (512,880 pixels) 1068.5 × 480 dots × 3 panels Lamp XL-100U: HID lamp, 100 W Lens Large diameter hybrid lens ...
-
Sony KL-W9000 - page 3
– 3 – KL-W7000/W9000 RM-Y980 SAFETY CHECK-OUT (US Model only) LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microampers). Leakage current can be measured by any one of three methods. 1. A commercial leakag ...
-
Sony KL-W9000 - page 4
– 4 – KL-W7000/W9000 RM-Y980 TABLE OF CONTENTS Section Title Page Section Title Page 1. GENERAL .................................................................. 5 2. DISASSEMBLY 2-1. Rear Cover Removal ........................................... 18 2-2. Chassis Assy Removal ........................................ 18 2-3. Service Position ... ...
-
Sony KL-W9000 - page 5
– 5 – SECTION 1 GENERAL The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual. 4 -EN Welcome! Pr ecautions This projection monitor operates on extremely high voltage. To prevent fire or electric shock, please follow the ...
-
Sony KL-W9000 - page 6
– 6 – 6 -EN Getting Started 2 Pass a strong cord or a chain through each bracket mounted in step 1, and then secure it to a wall or a pillar, etc. Using the buckle You can also use the supplied buckle to secure the monitor to the stand. 1 Attach the buckle to the stand on which the monitor is mounted. Tighten the supplied screw firmly. 2 Insert ...
-
Sony KL-W9000 - page 7
– 7 – 8 -EN Getting Started INPUT SELECT VIDEO R L AUDIO VIDEO 2 IN RESET RGB AUDIO RGB 2 IN Connecting to a Macintosh or compatible computer Connect the RGB 2 IN connector on the front or the RGB 1 IN connector at the rear of the monitor to the video/audio outputs of the computer using the supplied RGB signal cable (D-sub 15 pin ˜ D-sub 15 pi ...
-
Sony KL-W9000 - page 8
– 8 – 10 -EN Getting Started Connecting two VCRs for editing The monitor outputs signals from the VIDEO IN jacks through the VIDEO OUT jacks. With two VCRs connected to the VIDEO IN and VIDEO OUT jacks, you can edit the tape. Note For the RGB signal input from the RGB 1/2 IN connectors, the monitor outputs only the audio signal. Connecting the ...
-
Sony KL-W9000 - page 9
– 9 – 12 -EN Operations 1 If the STANDBY indicator on the front of the monitor is lit in orange, press POWER on the remote control to turn on the power. Press the power switch (green) on the monitor if the STANDBY indicator is not lit. The green u (power) indicator flashes, then lights up. 2 Turn on the power of the connected equipment. 3 Press ...
-
Sony KL-W9000 - page 10
– 10 – 14 -EN Operations The wide-format picture is enlarged and the subtitle area is compressed so that the picture is aligned with the screen size. The picture is enlarged horizontally and vertically and the upper and lower portions of the picture are compressed to the screen size. Recommended picture mode When watching a picture with normal ...
-
Sony KL-W9000 - page 11
– 11 – 16 -EN Operations Adjusting the position (CENTER) After projecting the picture from a computer, you may need to adjust the position of the picture to fit the monitor screen. You can also move the picture as you like. The setting is only for the input signal displayed on the screen. 1 Press CENTER/SIZE until the CENTER adjustment screen a ...
-
Sony KL-W9000 - page 12
– 12 – 18 -EN Operations MENU N CONTRAST BRIGHTNESS COLOR HUE SHARPNESS RESET VIDEO ADJUST BRIGHTNESS VIDEO ADJUST (2) Press ENTER. 5 Adjust the selected item. Press V , b , v or B to adjust the item, and press ENTER. 6 To adjust other items, repeat steps 4 and 5. 7 Press MENU to return to the original screen. To reset to th ...
-
Sony KL-W9000 - page 13
– 13 – 20 -EN Operations You can adjust the quality of the sound to suit you taste and store the settings into AV MEMORY. 1 Press MENU. 2 Press V or v to select VIDEO/AUDIO, and press ENTER. 3 Press V or v to select AUDIO ADJUST, and press ENTER. 4 Select the item you want to adjust. For example: (1) To adjust the bass, press V or v to move the ...
-
Sony KL-W9000 - page 14
– 14 – 22 -EN Operations OPTION N AUTO SHUT OFF:OFF LANGUAGE: ENGLISH You can set the monitor to turn off when the time you specify has passed after the input of the sync signal from the computer shut off. 1 Press MENU. 2 Press V or v to select OPTION, and press ENTER. 3 Press V or v to select AUTO SHUT OFF, and press ENTER. 4 Press B or ...
-
Sony KL-W9000 - page 15
– 15 – 24 -EN Additional Information Replacing a lamp If the screen becomes dark, the color looks unusual, or the LAMP indicator on the front of the monitor flashes, it is time to replace the lamp with a new one. Before replacement • Be sure to use the Sony XL-100U lamp unit (not supplied) for replacement. Use of other lamps causes damage to ...
-
Sony KL-W9000 - page 16
– 16 – 26 -EN Additional Information What flashing of the indicators on the front of the monitor means The u (power) (green), STANDBY (orange) and/or LAMP (red) indicators indicate the conditions of the monitor and warnings by lighting or flashing, as follows. The u indicator lights. / The power of the monitor is on. The STANDBY indicator light ...
-
Sony KL-W9000 - page 17
– 17 – 29 -EN Additional Information EN MENU VOLUME LAMP INPUT SELECT STANDBY RGB 2 IN VIDEO R L AUDIO VIDEO 2 IN RESET ENTER CENTER/SIZE RGB AUDIO 1 Remote sensor 2 LAMP indicator (pages 24 , 26 ) 3 STANDBY indicator (pages 12 , 26 ) 4 CENTER/SIZE button (page 16 ) 5 ◊ / √ / ı / ∫ buttons (page 16 ) 6 VIDEO 2 IN jacks (page 10 ) 7 RGB 2 ...
-
Sony KL-W9000 - page 18
– 18 – SECTION 2 DISASSEMBLY 2-1. REAR COVER REMOVAL 2-3. SERVICE POSITION 2-4. U BOARD REMOVAL 2-2. CHASSIS ASSY REMOVAL Rear cover 2 Twelve screws (+BVTP 4 x 16) 1 Chassis assy Chassis assy 2 Two screws (+BVTP 4 x 16) 1 Five screws (+BVTP 3 x 12) 1 U bracket 3 Two claws 4 U board 5 Two claws 2 ...
-
Sony KL-W9000 - page 19
– 19 – 2-5. POWER BLOCK AND K BOARD REMOVAL 2-6. FILTER REMOVAL Power block 5 Terminal 2 Two printed circuit board holders 4 K board 8 Two printed circuit board holders 7 Two screws (+BVTP 4 x 16) 6 Two screws (+BVTP 4 x 16) 3 Two screws (+BVTP 3 x 12) 1 Filter 2 Front panel (L) 1 Filter (Reserve) 3 ...
-
Sony KL-W9000 - page 20
– 20 – 2-7. LAMP REMOVAL 2-9-1. SCREEN FRAME REMOVAL [W7000] Lamp door 3 Screw (Ornamental screw B) 2 Front panel (R) 1 Lamp 5 Two screws (Hexagon socket bolt 4 x 12) 4 Two screws (+BVTP 4 x 16) 1 Screen frame 3 Eight screws (+BVTP 4 x 16) 2 2-9-2. SCREEN FRAME REMOVAL [W9000] 2-8. HA AND HB BOARDS REMOVAL Two screws (+BVTP 3 x 12) 5 HB board 6 ...
-
Sony KL-W9000 - page 21
– 21 – 2-10-1. C BOARD REMOVAL 2-11. OPTICAL UNIT REMOVAL 2-10-2. EXTENSION CABLE (C BOARD) Screen mirror block 2 Six screws (+BVTP 4 x 16) 1 Four printed circuit board holders 5 Four screws (+BVTP 3 x 12) 3 C cover 4 C board 6 CN5003 CN5001 CN5002 C board Extension cable Optical shield 1 Three screws (+BVTP 4 x 16) 4 Optical unit 5 Three screw ...
-
Sony KL-W9000 - page 22
– 22 – KL-W7000/W9000 RM-Y980 SECTION 3 CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENT IN SERVICE MODE The SERVICE mode cannot be entered with the remote commander RM-Y980 attached to this set. Use the commander of other TV set. Adjustment in SERVICE mode Note: • Write data in the memory each time when one item was adjusted. • Adjusted data are ...
-
Sony KL-W9000 - page 23
– 23 – KL-W7000/W9000 RM-Y980 BASIC ADJUSTMENT IN SERVICE MODE 1. To enter SERVICE mode 1) Turn the POWER switch on the TV set “ON”, then make it in standby status with the remote commander. 2) Operate the remote commander as follows: Screen display CH “5” Volume “+” side POWER “ON” (remote commander) 2. To read the memory 1) En ...
-
Sony KL-W9000 - page 24
– 24 – KL-W7000/W9000 RM-Y980 CXA2011Q Item Display Register Name Range Stndard Values Typical Standard Values VIDEO RGB 0 DLVL DRIVE LEVEL 0-63 44 44 2 kinds, RGB 3ch gain control 1 SW2 SW2 0,1 0 0 1 kind 2 SW1 SW1 0,1 0 0 1 kind 3 SW0 SW0 0,1 0 0 1 kind 4 SBOF SUB BRI OFFSET 0-63 23 43 2 kinds. Offset of VIDEO/RGB SUB BRIGHT 0=–31, · · , ...
-
Sony KL-W9000 - page 25
– 25 – KL-W7000/W9000 RM-Y980 1C (3-Dimensional Com µ PD6486) Item Display Register Name Range Standard Values Typical Standard Values Others Presen. Movie 0 MS MS1, MS0 0-3 0 1 BPFS BPFS 0-1 0 2 YDLL YDELAYL 0-7 2/2 3 HRD HRD8-1 0-256 21 4 DYCO DYCOR 0-15 5/5 5 DYGA DYGAIN 0-15 8/8 6 DCCO DCCOR 0-15 5/5 7 DCGA DCGAIN 0-15 6/6 8 VTR VTR1, VTR0 ...
-
Sony KL-W9000 - page 26
– 26 – KL-W7000/W9000 RM-Y980 MID2 (CXD2072Q RGB (1) ) Item Register Range Standard Values Typical Standard Values Display Name VGAT350 VGAG W-VGA VGA72 VGA75 0 HSIZ HSIZEA 0-255 A0 Every input signal: H size adj. (NTSC) 1 VGAH VGAHS 0-127 2F 30 2E 2F 2B Every input signal polarity + Wide screen: H size adj. (RGB) 2 HPOS HPOSIA 0-255 2E 2E 2D 2 ...
-
Sony KL-W9000 - page 27
– 27 – KL-W7000/W9000 RM-Y980 MID2 (CXD2072Q RGB (3) ) Item Register Range Standard Values Typical Standard Values Display Name SVGA75 XGA60 W-XGA MAC13 MAC16 0 HSIZ HSIZEA 0-255 A0 Every input signal: H size adj. (NTSC) 1 VGAH VGAHS 0-127 1A 1D 1C 2F 9 Every input signal polarity + Wide screen: H size adj. (RGB) 2 HPOS HPOSIA 0-255 28 26 26 2E ...
-
Sony KL-W9000 - page 28
– 28 – KL-W7000/W9000 RM-Y980 AP (TA8776N) Item Display Register Name Range Standard Values Typical Standard Values 0 SBAS SUB_BASS 0-63 10 10 1 STRE SUB_TRABLE 0-63 2 2 MID2 (CXD2072Q RGB (4) ) Item Register Range Standard Values Typical Standard Values Display Name VGAT85 OTHERS REF=3 REF=4 REF=5 0 HSIZ HSIZEA 0-255 A0 Every input signal: H s ...
-
Sony KL-W9000 - page 29
– 29 – KL-W7000/W9000 RM-Y980 OP (Others) Item Register Name Range Standard Values Typical Standard Values Display 0 OSDH Display H Position 0-63 10 (VIDEO) 7(RGB) 2 Kinds (VIDEO, RGB) 1 OSDV Display V Position 0-63 7 (VIDEO) 7(RGB) 2 Kinds (VIDEO, RGB) 2 ASHT Auto Shut Off 0,1 Not used 0: OFF, 1: ON 3 CPWR CH Power ON Not used Not used 4 AGCH ...
-
Sony KL-W9000 - page 30
– 30 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals * L5002 * L5004 * 13.67 ± 0.10MHz * * 10.22 ± 0.05MHz * * NTSC signal * Frequency counter * Double speed NTSC * Oscilloscope * NTSC signal * Frequency counter * Double speed NTSC * Oscilloscope C Board ...
-
Sony KL-W9000 - page 31
– 31 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals * A : 1.35 ± 0.02Vp-p * B : 6.10 ± 0.02Vp-p * A : 1.35 ± 0.02Vp-p * B : 5.70 ± 0.02Vp-p *I 2 C bus encoder * 2. IC Level Adjustment 1. Using *I 2 C bus encoder, set the NT-WIDE mode. 2. Enter NT doub ...
-
Sony KL-W9000 - page 32
– 32 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals * TP5611 [BLBS] * TP5607 is Ref. GND * TP5603 [B-SIG2] * TP5603 [B-SIG2] * TP 5602 [B-SIG1] * TP5604 [B-SIG3] * TP5603 [B-SIG2] 3) B channel 1. Using *DC power, apply 0V to *TP5611. 2. Connect *oscillosc ...
-
Sony KL-W9000 - page 33
– 33 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals 3. r Curve Adjustment • C board input signal level setting 1. Using *I 2 C bus encoder, set the NT-WIDE mode. 2. Enter *NT double speed (10 step) signal of bias 2.2V and amplitude 1.8Vp-p to the CN5201 ...
-
Sony KL-W9000 - page 34
– 34 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals * A : 8.30 ± 0.02Vp-p * B : 3.45 ± 0.10Vp-p * 10 IRE ~20IRE : F800 : 20mV * Oscilloscope * DC power * TP5603 [B-SIG2] * TP5411 [GLBS] 5. Adjust *RV so that the forward 10 IRE ~ reverse 10 IRE (A) be- c ...
-
Sony KL-W9000 - page 35
– 35 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals * (Value in 3) – 0.50 ± 0.02V * (Value in 5) – 0.80 ± 0.02V 4 . Adjust *RV5404 so that the voltage at *TP5405 becomes *(Value in 3) –0.50 ± 0.02V. 5. Measure voltage at the *TP5603 with digital ...
-
Sony KL-W9000 - page 36
– 36 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals * 75% Full Field Color Bar * Oscilloscope * TP4003 [2B] * Adjust No.7 SCL2 to attain same level * Adjust No.0 SHUE to attain same level * CXA1839 No6. SPC2 * CSA1839 No1. S BRT * 0 IRE-100IRE : 2.0Vp-p * ...
-
Sony KL-W9000 - page 37
– 37 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals Registration Adjustment Preparation • Projected picture size ........... 49.1 inch • Projection distance .............. 726.2 mm • Aspect ratio ..................... 16:9 • Picture quality adjust ...
-
Sony KL-W9000 - page 38
– 38 – KL-W7000/W9000 RM-Y980 Adjustment Items and Procedure Tools and Test Points Adjustment Places Illustration Waveforms and Values Signals WB meter (NTSC 30 IRE) W7000 W9000 *X : 0.257 ± 0.005 0.257 ± 0.005 Y : 0Z.281 ± 0.005 0.281 ± 0.005 (VGA 30 IRE) W7000 W9000 *X : 0.248 ± 0.005 0.248 ± 0.005 Y : 0.265 ± 0.005 0.265 ± 0.005 NTSC ...
-
Sony KL-W9000 - page 39
KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 SECTION 4 DIAGRAMS – 40 – – 39 – – 42 – – 41 – 4-1. BLOCK DIAGRAMS ...
-
Sony KL-W9000 - page 40
KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 – 44 – – 43 – – 46 – – 45 – ...
-
Sony KL-W9000 - page 41
KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 – 48 – – 47 – – 50 – – 49 – ...
-
Sony KL-W9000 - page 42
KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 – 52 – – 51 – – 54 – – 53 – MEMO MEMO 4-2. CIRCUIT BOARDS LOCATION C TB TA HB HA Power block GA G A BB U K 4-3. SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS Note: • All capacitors are in µF unless otherwise noted. (pF: µµF) Capacitors wi ...
-
Sony KL-W9000 - page 43
KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 – 56 – – 55 – – 58 – – 57 – (1) Schematic Diagrams of HA, HB, K, TA and TB Boards (ha) VIDEO2 IN, USER CONTROL (ta) SENSOR <LAMP COVER> (tb) SENSOR <FILTER COVER> (k) AUDIO (hb) POWER SW — TB BOARD — STBY+5V 5.2 HOST 5V 1 2 3 ...
-
Sony KL-W9000 - page 44
KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 KL-W7000/W9000 RM-Y980 – 60 – – 59 – – 62 – – 61 – (a) SYSTEM CONTROL, VIDEO PROCESS — A BOARD (Conductor Side) — — A BOARD (Component Side) — Schematic diagrams Ò (ha) (hb) (k) (ta) (tb) boards • A BOARD SEMICONDUCTOR LOCATION IC IC1007 E–3 E–4 IC10 ...
-
Sony KL-W9000 - page 45
– 64 – – 63 – – 66 – – 65 – (2) Schematic Diagram of A (1/3) Board • A(1/3) BOARD IC1602 S-80743AL-A7 IC1008 4 5.0 IC1101 10 2.3 11 2.4 12 5.0 13 * 19 4.9 20 0 32 0 33 0 35 0.2 36 4.7 37 0.2 38 5.0 39 0.2 40 0.1 41 0.1 42 0 43 0 44 0 46 50 53 0 55 0 61 0 62 0 64 0 65 0 67 4.6 72 4.8 73 4.8 74 5.1 75 5.1 77 4.6 83 5.0 84 4.7 • A ...
-
Sony KL-W9000 - page 46
– 68 – – 67 – – 70 – – 69 – (3) Schematic Diagram of A (2/3) Board Schematic diagram Ò (a) (1/3) board Schematic diagram (a) (1/3) board l • A(2/3) BOARD IC2001 µPC659AGS IC2001 1 3.5 4 2.9 6 0.4 7 2.8 10 2.5 13 2.0 14 2.1 15 2.3 16 2.5 17 3.0 20 2.3 21 1.8 22 1.6 24 2.3 IC2003 3 2.8 4 3.4 50 7 3.7 9 2.8 18 3.9 20 4.5 22 0.4 23 ...
-
Sony KL-W9000 - page 47
– 72 – – 71 – – 74 – – 73 – 22 0.5 25 4.5 26 4.7 30 9.1 33 4.8 34 4.8 35 4.8 37 4.8 38 4.8 39 4.8 41 2.7 44 3.0 45 2.9 46 3.0 47 9.4 IC4004 4 5.3 5 4.8 6 3.5 14 5.4 15 5.4 IC4009 1 0.4 2 0.3 90 10 0 11 0 12 0.8 13 0.4 14 0.8 15 0.3 IC4011 27 5.0 28 5.0 30 6.7 31 6.6 32 6.1 35 4.3 IC4001 2 4.9 9 5.5 12 1.1 14 5.4 IC4002 1 2.9 3 3.4 4 ...
-
Sony KL-W9000 - page 48
– 76 – – 75 – – 78 – – 77 – • BB BOARD VOLTAGE LIST IC3001 3 2.5 4 0.4 5 1.6 6 1.8 70 12 1.8 13 3.0 IC3002 2 0 3 2.4 4 0.6 5 2.5 6 1.8 70 90 11 0 12 1.8 13 3.1 IC3004 2 1.5 3 1.3 4 0.7 5 0.6 6 1.0 7 1.7 80 90 10 0 11 0 12 0 13 2.0 15 1.8 16 1.0 18 0.6 19 0.7 21 1.2 22 1.4 24 1.1 25 1.0 27 0.6 28 0.9 30 1.5 31 1.8 32 3.4 33 0 34 2. ...
-
Sony KL-W9000 - page 49
(bb) MID, 3CH 8BIT A/D – 80 – – 79 – — BB BOARD (Conductor Side) — — BB BOARD (Component Side) — BB BOARD Terminal name of semiconductors in silk screen printed circuit ( * ) Ref. * Q3204, Q3207–Q3209, Q3305–D3308 Q3018, Q3019, Q3201–Q3203, Q3205, Q3206, Q3210–Q3212 1 2 * : Refer to Terminal name of semiconductors in silk sc ...
-
Sony KL-W9000 - page 50
– 82 – – 81 – (u) IN/OUT TERMINAL, AV SW/INPUT SELECT — U BOARD (Conductor Side) — — U BOARD (Component Side) — U BOARD Terminal name of semiconductors in silk screen printed circuit ( * ) Ref. * 1 2 3 6 7 Q308, Q311–Q316, Q801–Q803 Q301, Q303, Q306, Q309, Q310, Q317, Q602, Q603, Q804 D1, D5–D8, D10, D201–D207, D301–D309, ...
-
Sony KL-W9000 - page 51
– 84 – – 83 – – 86 – – 85 – (6) Schematic Diagram of U Board IC102 5 0.1 6 4.1 7 4.2 IC103 5 0.6 6 4.5 70 IC601 1 4.4 3 4.4 4 2.0 5 4.4 6 2.0 7 4.4 8 3.3 9 5.0 10 2.0 11 4.4 13 4.4 15 5.0 16 2.0 17 4.4 18 2.0 19 4.4 20 3.2 21 4.9 22 4.4 24 4.4 26 5.0 27 5.0 29 0 30 3.1 Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] Ref. Pin No. V ...
-
Sony KL-W9000 - page 52
– 88 – – 87 – – 90 – – 89 – (7) Schematic Diagram of C (1/2) Board IC5201 2 1.2 3 1.2 4 5.1 5 1.2 8 6.8 9 6.8 10 6.8 11 6.8 14 6.8 15 6.8 20 3.3 21 0 22 2.7 23 3.2 24 6.3 25 1.4 27 6.8 30 3.4 31 0.3 33 0.9 34 0.9 35 1.3 36 3.7 37 5.1 39 5.1 41 2.6 Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] Ref. Pin No ...
-
Sony KL-W9000 - page 53
– 92 – – 91 – – 94 – – 93 – (8) Schematic Diagram of C (2/2) Board — C BOARD (Component Side) — (c) LCD DRIVER, LCD CONTROL — C BOARD (Conductor Side) — IC5002 1 2.5 2 2.5 3 2.5 50 6 4.9 7 4.9 IC5003 1 1.3 2 1.4 3 0.8 5 1.0 60 7 1.4 IC5004 5 0 60 7 5.0 80 90 11 5.0 12 5.0 16 5.4 17 5.4 20 5.0 21 5.0 22 5.0 31 5.0 32 0 33 4.9 ...
-
Sony KL-W9000 - page 54
– 96 – – 95 – – 98 – – 97 – (9) Schematic Diagram of G and GA Boards IC603 1 2.5 3 9.3 IC701 4 5.8 5 123.6 IC702 1 2.5 3 11.2 PH680 1 1.2 20 30 4 0.2 PH701 1 12.3 2 11.2 3 5.8 4 16.5 Q602 B 10.0 C 0.1 E 10.1 Q603 B 10.2 E 9.3 Q604 B 0.2 C 10.2 Ref. Pin No. Voltage [V] Ref. Pin No. Voltage [V] Q605 B 1.3 C 0.1 E 1.4 Q606 B 0.1 C 1.4 ...
-
Sony KL-W9000 - page 55
P110 – 99 – KL-W7000/W9000 RM-Y980 4-4. SEMICONDUCTORS ...
-
Sony KL-W9000 - page 56
P110 – 100 – KL-W7000/W9000 RM-Y980 ...
-
Sony KL-W9000 - page 57
– 101 – KL-W7000/W9000 RM-Y980 • Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • Items with no part number and no description are not stocked because they are seldom required for routine service. • The construction parts of an as ...
-
Sony KL-W9000 - page 58
KL-W7000/W9000 RM-Y980 – 102 – 5-2. FRONT COVER [W7000] r 7-685-648-79 +BVTP 3X12 p 7-685-663-79 +BVTP 4X16 π 7-683-421-04 HEXAGON SOCKET BOLT 4X12 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 51 X-4033-189-1 PANEL (L) ASSY, FRONT 52 52 4-054-709-01 STRIKE 53 X-4033-188-1 PANEL (R) ASSY, FRONT 52 54 X-4035-092-1 DOOR ...
-
Sony KL-W9000 - page 59
– 103 – KL-W7000/W9000 RM-Y980 5-3. SCREEN MIRROR BLOCK AND OPTICS UNIT [W7000] r 7-685-648-79 +BVTP 3X12 p 7-685-663-79 +BVTP 4X16 7-685-167-19 WASHER HEAD SCREW +P 4X35 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 101 X-4035-095-1 FRAME ASSY, SCREEN 102 4-056-485-11 SCREEN, CONTRAST 103 4-051-303-31 PLATE (L), DUFFU ...
-
Sony KL-W9000 - page 60
KL-W7000/W9000 RM-Y980 – 104 – 5-4. CHASSIS [W9000] r 7-685-648-79 +BVTP 3X12 p 7-685-663-79 +BVTP 4X16 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 151 * A-1380-551-A K BOARD, COMPLETE 152 * 3-703-141-00 HOLDER, PRINTED CIRCUIT BOARD 153 ¡ 1-473-545-13 POWER BLOCK 154 * 4-051-332-01 BRACKET, MAIN 155 * A-1311-597-A ...
-
Sony KL-W9000 - page 61
– 105 – KL-W7000/W9000 RM-Y980 5-5. FRONT COVER [W9000] r 7-685-648-79 +BVTP 3X12 p 7-685-663-79 +BVTP 4X16 π 7-683-421-04 HEXAGON SOCKET BOLT 4X12 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 201 X-4033-189-1 PANEL (L) ASSY, FRONT 202 202 4-054-709-01 STRIKE 203 X-4033-188-1 PANEL (R) ASSY, FRONT 202 204 X-4035-092- ...
-
Sony KL-W9000 - page 62
KL-W7000/W9000 RM-Y980 – 106 – 5-6. SCREEN MIRROR BLOCK AND OPTICS UNIT [W9000] r 7-685-648-79 +BVTP 3X12 p 7-685-663-79 +BVTP 4X16 7-685-167-19 WASHER HEAD SCREW +P 4X35 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 251 X-4035-095-1 FRAME ASSY, SCREEN 252 4-056-485-11 SCREEN, CONTRAST 253 4-054-229-11 PLATE (L), DUFFU ...
-
Sony KL-W9000 - page 63
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 107 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 64
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 108 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 65
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 109 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 66
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 110 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 67
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 111 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 68
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 112 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 69
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 113 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 70
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 114 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 71
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 115 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 72
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 116 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 73
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 117 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 74
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 118 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 75
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 119 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 76
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 120 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 77
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 121 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 78
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 122 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 79
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 123 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 80
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 124 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 81
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 125 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 82
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 126 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 83
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 127 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 84
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 128 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 85
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 129 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 86
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 130 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 87
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 131 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
-
Sony KL-W9000 - page 88
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK – 132 – KL-W7000/W9000 RM-Y980 The components identified by shading and mark ¡ are critical for safety. Replace only with part number specified. Les composants identifiés per un tramé et une marque ¡ sont critiques pour la sécurité. Ne les remplacer que par une piéce ...
Hai una domanda su Sony KL-W9000?
Utilizza il modulo sottostante
Se non hai risolto il problema con Sony KL-W9000 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Sony KL-W9000 è probabile che voglia condividere il modo di risolverlo.