Manuale per l’uso Transition Networks SBFTF1018-120

9 pagine 0.14 mb
Scarica

Vai alla pagina of 9

Summary
  • Transition Networks SBFTF1018-120 - page 1

    Part Number Copper - five (5) ports 10Base-T/100Base-TX Duplex Fiber-Optic - one (1) port 100Base-FX SBFTF1011-120 RJ-45 100 m (328 ft)* ST, 1300 nm multimode 2 km (1.2 miles)* SBFTF1013-120 RJ-45 100 m (328 ft)* SC, 1300 nm multimode 2 km (1.2 miles)* SBFTF1014-120 RJ-45 100 m (328 ft)* SC, 1310 nm single mode 20 km (12.4 miles)* SBFTF1015-120 (lo ...

  • Transition Networks SBFTF1018-120 - page 2

    2 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network. (TX) = transmit (RX) = receive ** SBFTF1029- 120 and - 121 are intended to be installed in the same network where one is the local converter an ...

  • Transition Networks SBFTF1018-120 - page 3

    4 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Set the Dip Switches -- Continued NOTE: Dip switch 4 (in the “SW” set) applies to fiber port 1 (F1). 4. Fiber Mode (Fiber Port 1) Up (Full-Duplex) - The cable distances for fiber port 1 (F1) are constrained by the cable requir ...

  • Transition Networks SBFTF1018-120 - page 4

    6 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued • If half-duplex mode is used, refer to the 512-Bit Rule (see page 9). • If full-duplex mode is used, the 512-Bit Rule does not apply. The cable lengths are constrained by the cable requirements (see pages 1 and 2). Connect th ...

  • Transition Networks SBFTF1018-120 - page 5

    8 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation Status LEDs Use the status LEDs next to the fiber ports to monitor the media converter and the fiber network connections. F(ull) D(uplex) On = Full-duplex connection. Off = Half-duplex connection. L(ink) ACT(ivity) On = Fiber link connection. Fl ...

  • Transition Networks SBFTF1018-120 - page 6

    10 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Oper ation -- Continued Product Features -- Continued Rate Conversion The SBFTF10xx-12x media converter allows connection of 10Mb/s terminal devices on a 10Base-T legacy Ethernet copper network to 100Mb/s terminal devices on a 100Base-TX fast Ethernet cop ...

  • Transition Networks SBFTF1018-120 - page 7

    12 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications -- Continued Copper Cable Category 3: (Minimum requirement for 10 Mb/s operation) Gauge 24 to 22 AWG Attenuation 11.5 dB/100m @ 5-10 MHz Maximum Cable Distance 100 meters Category 5: (Minimum requirement for 100 Mb/s operation) Gauge ...

  • Transition Networks SBFTF1018-120 - page 8

    14 SBFTF10xx-12x 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 T r oubleshooting If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1. Is the power LED on the media converter illuminated? NO • Is the power adapter ...

  • Transition Networks SBFTF1018-120 - page 9

    Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2001-2005 Transition Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means - graphic, electronic, or mechanical - without written permission from Transition Networks. Pr ...

Fabbricante Transition Networks Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoTransition Networks SBFTF1018-120 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Transition Networks
- manuali per l’uso SBFTF1018-120
- schede prodotto Transition Networks
- opuscoli
- o etichette energetiche Transition Networks SBFTF1018-120
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Transition Networks SBFTF1018-120.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Transition Networks SBFTF1018-120, manuali di manutenzione, brevi manuali o manuali utente Transition Networks SBFTF1018-120. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Transition Networks SBFTF1018-120.

Manuale completo del dispositivo Transition Networks SBFTF1018-120, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Transition Networks SBFTF1018-120 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Transition Networks SBFTF1018-120.

Il manuale per l’uso completo Transition Networks, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Transition Networks SBFTF1018-120 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Transition Networks SBFTF1018-120, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Transition Networks SBFTF1018-120 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Transition Networks SBFTF1018-120 - che ci dovrebbe aiutare nei primi passi durante l'uso Transition Networks SBFTF1018-120
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Transition Networks SBFTF1018-120
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Transition Networks SBFTF1018-120 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Transition Networks SBFTF1018-120?

Utilizza il modulo sottostante

Se non hai risolto il problema con Transition Networks SBFTF1018-120 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Transition Networks SBFTF1018-120 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)