Italiano dropdown-ico

Manuale per l’uso Asus F1A75-V EVO

72 pagine Non applicabile
Scarica

Vai alla pagina of 72

Summary
  • Asus F1A75-V EVO - page 1

    Motherboard F1A75-V EVO ...

  • Asus F1A75-V EVO - page 2

    ii Copyright © 201 1 ASUST eK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without ...

  • Asus F1A75-V EVO - page 3

    iii Contents Notices ......................................................................................................... vi Safety information ..................................................................................... vii About this guide ....................................................................................... viii F ...

  • Asus F1A75-V EVO - page 4

    iv Contents 1.1 1 Onboard switch .......................................................................... 1-25 1.12 Onboard LEDs ............................................................................ 1-28 1.13 Software support ........................................................................ 1-30 1.13.1 Installing an operating system ...

  • Asus F1A75-V EVO - page 5

    v Contents 2.5.3 USB Conguration ........................................................ 2-1 9 2.5.4 NB Conguration ........................................................... 2-20 2.5.5 Onboard Devices Conguration .................................... 2-20 2.5.6 APM ......................................................................... ...

  • Asus F1A75-V EVO - page 6

    vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has b ...

  • Asus F1A75-V EVO - page 7

    vii DO NOT throw the motherboard in municipal waste. This product has been designed to enable proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products. DO NOT th ...

  • Asus F1A75-V EVO - page 8

    viii Conventions used in this guide T o ensure that you perform certain tasks properly , take note of the following symbols used throughout this manual. DANGER/W ARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. NOTE: T ips and a ...

  • Asus F1A75-V EVO - page 9

    ix F1A75-V EVO specications summary (continued on the next page) APU AMD ® A- & E2- series accelerated processors with AMD ® Radeon™ HD 6000 series graphics, up to 4 CPU cores, FM1 package AMD ® T urbo Core T echnology 2.0 support DirectX ® 1 1 Support * The AMD ® T urbo Core T echnology 2.0 support depends on the APU types. ** Refer ...

  • Asus F1A75-V EVO - page 10

    x F1A75-V EVO specications summary Storage AMD ® A75 FCH southbridge: - 6 x Serial A T A 6.0Gb/s connectors (gray) support RAID 0, RAID 1, RAID 10 and JBOD congurations Asmedia ® PCIe SA T A 6Gb/s controller: - 1 x Serial A T A 6Gb/s connector (navy blue) - 1 eSerial A T A 6Gb/s at the back I/O Audio ALC892 8-channel High Denition Audio ...

  • Asus F1A75-V EVO - page 11

    xi F1A75-V EVO specications summary Special features 100% All high quality conductive polymer capacitors ASUS exclusive overclocking features Intelligent overclocking tools: - TPU Switch - Auto T uning Precision T weaker 2 - vCore: Adjustable CPU voltage at 0.00625V increment - vDRAM Bus: Adjustable DRAM voltage at 0.01V increment - vFCH: Adjust ...

  • Asus F1A75-V EVO - page 12

    xii ...

  • Asus F1A75-V EVO - page 13

    1.2 Package contents Check your motherboard package for the following items. Motherboard ASUS F1A75-V EVO motherboard Cables 2 x Serial A T A 6.0Gb/s cables Accessories 1 x Q-Shield 1 x Q-Connector (retail version only) Application DVD ASUS motherboard Support DVD Documentations User Manual If any of the above items is damaged or missing, contact y ...

  • Asus F1A75-V EVO - page 14

    AMD ® A75 FCH (Hudson D3) Chipset AMD ® A75 FCH (Hudson D3) is designed to support up to 5GT/s interface speed and PCI Express™ 2.0 x 16 (at x4 speed) graphics. It supports 6 x SA T A 6Gb/s ports and 4 x USB 3.0 Ports. A TI ® CrossFireX™ T echnology A TI’s CrossFireX™ boosts image quality along with rendering speed, eliminating the need ...

  • Asus F1A75-V EVO - page 15

    EPU T ap into the world’ s rst real time PC power saving engine through a simple onboard switch or AI Suite II utility . Get total system-wide energy optimization by automatically detecting current PC loadings and intelligently moderating power consumption. This also reduces fan noise and extends component longevity . 1.3.3 ASUS Digital Power ...

  • Asus F1A75-V EVO - page 16

    ASUS UEFI BIOS (EZ Mode) The new ASUS UEFI BIOS is an Unied Extensible Firmware Interface that offers a user-friendly interface that goes beyond traditional keyboard- only BIOS controls to enable more exible and convenient mouse input. Users can easily navigate the new UEFI BIOS with the same smoothness as their operating system. It natively ...

  • Asus F1A75-V EVO - page 17

    Fan Xpert ASUS Fan Xpert intelligently allows you to adjust the CPU fan speed according to different ambient temperatures caused by dif ferent climate conditions in different geographic regions and your PC’ s loading. The built-in variety of useful proles offer exible controls of fan speed to achieve a quiet and cool environment. ASUS Q-Des ...

  • Asus F1A75-V EVO - page 18

    1.4 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. • Unplug the power cord from the wall socket before touching any component. • Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power s ...

  • Asus F1A75-V EVO - page 19

    F1A75-V EVO 1.5 Motherboard overview 1.5.1 Placement direction When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below . DO NOT overtighten the screws! Doing so can damage the motherboard. Place this side ...

  • Asus F1A75-V EVO - page 20

    1.5.3 Motherboard layout 1.5.4 Layout contents Connectors/Jumpers/Slots/LED Page Connectors/Jumpers/Slots/LED Page 1. Power , CPU and chassis fan connectors (3-pin PWR_F AN, 4-pin CPU_F AN, and 4-pin CHA_F AN1/2) 1-19 1 1. USB 3.0 connector (20-1 pin USB3_56) 1-27 2. A TX power connectors (24-pin EA TXPWR, 8-pin EA TX12V) 1-20 12. SA T A 6.0Gb/s co ...

  • Asus F1A75-V EVO - page 21

    1.6 Accelerated Processing Unit (APU) This motherboard comes with an FM1 socket designed for AMD ® A- & E2- series accelerated processors with AMD ® Radeon™ HD 6000 series graphics. 1.6.1 Installing the APU T o install a APU: 1. Locate the FM1 socket on the motherboard. 2. Press the lever sideways to unlock the socket, then lift it up to a ...

  • Asus F1A75-V EVO - page 22

    5. When the APU is in place, push down the socket lever to secure the APU. The lever clicks on the side tab to indicate that it is locked. 6. Install a APU heatsink and fan following the instructions that comes with the heatsink package. Y ou can also refer to section 1.6.2 Installing heatsink and fan for instructions. 7. Connect the CPU fan cable ...

  • Asus F1A75-V EVO - page 23

    1.6.2 Installing the heatsink and fan Ensure that you use only AMD-certied heatsink and fan assembly . T o install the CPU heatsink and fan: 1. Place the heatsink on top of the installed CPU, ensuring that the heatsink ts properly on the retention module base. • The retention module base is already installed on the motherboard upon purchase ...

  • Asus F1A75-V EVO - page 24

    3. Align the other end of the retention bracket to the retention module base. A clicking sound denotes that the retention bracket is in place. Ensure that the fan and heatsink assembly perfectly ts the retention mechanism module base, otherwise you cannot snap the retention bracket in place. 4. Push down the retention bracket lock on the retenti ...

  • Asus F1A75-V EVO - page 25

    1.7.2 Memory congurations Y ou may install 512MB, 1GB, 2GB, and 4GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets. • Y ou may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration. Any excess memory from the higher-sized channel is then mappe ...

  • Asus F1A75-V EVO - page 26

    1.7.3 Installing a DIMM Unplug the power supply before adding or removing DIMMs or other system components. Failure to do so can cause severe damage to both the motherboard and the components. 1. Press the retaining clips outward to unlock a DIMM socket. 2. Align a DIMM on the socket such that the notch on the DIMM matches the DIMM slot key on the ...

  • Asus F1A75-V EVO - page 27

    1.8 Expansion slots In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.8.1 Installing an expansion card T o ...

  • Asus F1A75-V EVO - page 28

    1.9 Jumpers Clear RTC RAM (CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. Except whe ...

  • Asus F1A75-V EVO - page 29

    1.10 Connectors 1.10.1 Rear panel ports 1. PS/2 Keyboard/Mouse Combo port (purple/green). This port is for a PS/2 keyboard or PS/2 mouse. 2. Optical S/PDIF Out port. This port connects an external audio output device via an optical S/PDIF cable. 3. HDMI port. This port is for a High-Denition Multimedia Interface (HDMI) connector , and is HDCP co ...

  • Asus F1A75-V EVO - page 30

    13. USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1 devices. 14. USB 3.0 ports 1 and 2 . These two 9-pin Universal Serial Bus (USB) ports are for USB 3.0 devices. 15. DVI-D port. This port is for any DVI-D compatible device. DVI-D can’t be converted to output RGB Signal to CRT and isn’t compatible wit ...

  • Asus F1A75-V EVO - page 31

    1.10.2 Internal connectors 1. Power , CPU and chassis fan connectors (3-pin PWR F AN, 4-pin CPU_F AN, and 4-pin CHA_F AN1/2) Conn ect the f an ca bles to th e fa n con necto rs on the mothe rboa rd, ens uring th at th e blac k wi re of each cabl e mat ches the groun d pin of t he co nnec tor. • The CPU_F AN connector supports a CPU fan of maximum ...

  • Asus F1A75-V EVO - page 32

    2. A TX power connectors (24-pin EA TXPWR, 8-pin EA TX12V) These connectors are for an A TX power supply . The plugs from the power supply are designed to t these connectors in only one orientation. Find the proper orientation and push down rmly until the connectors completely t. • We recommend that you use an A TX 12V Specication 2.0 ...

  • Asus F1A75-V EVO - page 33

    3. Serial A T A 6.0 Gb/s connectors (7-pin SA T A6G_E1, SA T A6G_1~6) These connectors are for the Serial A T A 6.0 Gb/s signal cables for Serial A T A hard disk drives and optical disc drives. If you installed Serial A T A hard disk drives, you can create a RAID 0, RAID 1, RAID 10 or JBOD conguration through the onboard AMD ® A75 FCH controlle ...

  • Asus F1A75-V EVO - page 34

    5. System panel connector (20-8 pin P ANEL) This connector supports several chassis-mounted functions. • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep m ...

  • Asus F1A75-V EVO - page 35

    6. Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Ensure that the audio device of Sound playback is Realtek High Denition Audio (the name may be different based on the OS) . Go to Start > Control Panel > Sounds and Audio Devices > Sound Playback to congure ...

  • Asus F1A75-V EVO - page 36

    8. USB 2.0 connectors (10-1 pin USB34, USB56, USB78, USB910) These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specication that supports up to 480Mbps connection speed. Never connect ...

  • Asus F1A75-V EVO - page 37

    1. MemOK! switch Installing DIMMs that are incompatible with the motherboard may cause system boot failure, and the DRAM_LED near the MemOK! switch lights continuously . Press and hold the MemOK! switch until the DRAM_LED starts blinking to begin automatic memory compatibility tuning for successful boot. • Refer to section 1.12 Onboard LEDs for t ...

  • Asus F1A75-V EVO - page 38

    2. TPU switch This switch allows you to enable or disable the TPU function. 3. EPU switch This switch allows you to enable or disable the EPU function. F1A75-V EVO F1A75-V EVO TPU switch TPU F1A75-V EVO F1A75-V EVO EPU switch EPU • The TPU LED (ELED730) near the TPU switch lights when the switch setting is turned to Enable . • If you clear the ...

  • Asus F1A75-V EVO - page 39

    1.12 Onboard LEDs 1. Standby Power LED The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the loca ...

  • Asus F1A75-V EVO - page 40

    4. EPU LED The EPU LED lights when the EPU switch is turned to Enable . F1A75-V EVO F1A75-V EVO EPU LED ELED740 Chapter 1: Product introduction 1-28 ...

  • Asus F1A75-V EVO - page 41

    1.13 Software support 1.13.1 Installing an operating system This motherboard supports Windows ® XP / V ista / 7 Operating Systems (OS). Always install the latest OS version and corresponding updates to maximize the features of your hardware. • Motherboard settings and hardware options vary . Refer to your OS documentation for detailed informatio ...

  • Asus F1A75-V EVO - page 42

    Chapter 1: Product introduction 1-30 ...

  • Asus F1A75-V EVO - page 43

    Chapter 2: BIOS information 2-1 Chapter 2 BIOS information Save a copy of the original motherboard BIOS le to a USB ash disk in case you need to restore the BIOS in the future. Copy the original motherboard BIOS using the ASUS Update utility . • ASUS Update requires an Internet connection either through a network or an Internet Service Prov ...

  • Asus F1A75-V EVO - page 44

    2-2 ASUS F1A75-V EVO The ASUS Update utility is capable of updating itself through the Internet. Always update the utility to avail all its features. Updating from a BIOS file a. Select Update BIOS from le , then click Next . b. Locate the BIOS le from the Open window , then click Open . 3. Follow the onscreen instructions to complete the upd ...

  • Asus F1A75-V EVO - page 45

    Chapter 2: BIOS information 2-3 DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! 2.1.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process. Y ou can restore a corrupt ...

  • Asus F1A75-V EVO - page 46

    2-4 ASUS F1A75-V EVO Welcome to FreeDOS (http://www.freedos.org)! C:>d: D:> 3. When the Make Disk menu appears, select the FreeDOS command prompt item by pressing the item number . 4. At the FreeDOS prompt, type d: and press <Enter> to switch the disk from Drive C (optical drive) to Drive D (USB ash drive). Please select boot devic ...

  • Asus F1A75-V EVO - page 47

    Chapter 2: BIOS information 2-5 2. The BIOS Updater backup screen appears indicating the BIOS backup process. When BIOS backup is done, press any key to return to the DOS prompt. D:>bupdater /oOLDBIOS1.rom Filename Extension Backing up the current BIOS T o backup the current BIOS le using the BIOS Updater Ensure that the USB ash drive is ...

  • Asus F1A75-V EVO - page 48

    2-6 ASUS F1A75-V EVO Updating the BIOS le T o update the BIOS le using BIOS Updater 1. At the FreeDOS prompt, type bupdater /pc /g and press <Enter>. ASUSTek BIOS Updater for DOS V1.07 Current ROM Update ROM A: Note [Enter] Select or Load [Tab] Switch [V] Drive Info [Up/Down/Home/End] Move [B] Backup [Esc] Exit F1A75VE.ROM 4194304 2011- ...

  • Asus F1A75-V EVO - page 49

    Chapter 2: BIOS information 2-7 Using the power button , reset button , or the <Ctrl>+<Alt>+<Del> keys to force reset from a running operating system can cause damage to your data or system. We recommend to always shut down the system properly from the operating system. 2.2 BIOS setup program Use the BIOS Setup program to update t ...

  • Asus F1A75-V EVO - page 50

    2-8 ASUS F1A75-V EVO BIOS menu screen The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode. Y ou can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ Mode/Advanced Mode screen. EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an ove ...

  • Asus F1A75-V EVO - page 51

    Chapter 2: BIOS information 2-9 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations. T o access the EZ Mode, click Exit , then select ASUS EZ Mode . Menu bar The m ...

  • Asus F1A75-V EVO - page 52

    2-10 ASUS F1A75-V EVO Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai T weaker, Advanced, Monitor , Boot, T ool, and Exit) on the menu bar have their respective menu items. Back button This button appears when entering a submenu. P ...

  • Asus F1A75-V EVO - page 53

    Chapter 2: BIOS information 2-1 1 2.3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings. 2.3.1 System Language [English] Allows you to choose the BIOS l ...

  • Asus F1A75-V EVO - page 54

    2-12 ASUS F1A75-V EVO Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program. T o set an administrator password: 1. Select the Administrator Password item and press ...

  • Asus F1A75-V EVO - page 55

    Chapter 2: BIOS information 2-13 2.4 Ai T weaker menu The Ai T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai T weaker menu items. Incorrect eld values can cause the system to malfunction. The conguration options for this section vary depending on the CPU and DIMM model y ...

  • Asus F1A75-V EVO - page 56

    2-14 ASUS F1A75-V EVO T arget CPU Speed : xxxxMHz Displays the current CPU speed. T arget DRAM Speed : xxxxMHz Displays the current DRAM speed. 2.4.1 Ai Overclock T uner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency . Select any of these preset overclocking conguration options: [Auto] Load ...

  • Asus F1A75-V EVO - page 57

    Chapter 2: BIOS information 2-15 2.4.5 OC T uner OC T uner automatically overclocks the frequency and voltage of CPU and DRAM for enhancing the system performance. Press <Enter> and select OK to start automatic overclocking. 2.4.6 DRAM Timing Control The sub-items in this menu allow you to set the DRAM timing control features. Use the <+&g ...

  • Asus F1A75-V EVO - page 58

    2-16 ASUS F1A75-V EVO 2.4.8 DRAM V oltage [Auto] Allows you to set the DRAM voltage. The values range from 1.35V to 2.30V with a 0.01V interval. 2.4.9 SB 1.1V V oltage [Auto] Allows you to set the Southbridge 1.1V voltage. The values range from 1.1V to 1.4V with a 0.01V interval. 2.4.10 1.1Vsb V oltage [Auto] Allows you to set the 1.1Vsb voltage. T ...

  • Asus F1A75-V EVO - page 59

    Chapter 2: BIOS information 2-17 2.4.8 DRAM V oltage [Auto] Allows you to set the DRAM voltage. The values range from 1.35V to 2.30V with a 0.01V interval. 2.4.9 SB 1.1V V oltage [Auto] Allows you to set the Southbridge 1.1V voltage. The values range from 1.1V to 1.4V with a 0.01V interval. 2.4.10 1.1Vsb V oltage [Auto] Allows you to set the 1.1Vsb ...

  • Asus F1A75-V EVO - page 60

    2-18 ASUS F1A75-V EVO Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction. 2.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices. Main Ai T weaker Advanced Monitor Boot T ool Exit CPU Conguration Parameters EFI BIO ...

  • Asus F1A75-V EVO - page 61

    Chapter 2: BIOS information 2-19 2.5.2 SA T A Conguration While entering Setup, the BIOS automatically detects the presence of SA T A devices. The SA T A Port items show Not Present if no SA T A device is installed to the corresponding SA T A port. OnChip SA T A Channel [Enabled] Enables or disables onboard channel SA T A port. Conguration op ...

  • Asus F1A75-V EVO - page 62

    2-20 ASUS F1A75-V EVO Legacy USB3.0 Support [Enabled] [Enabled] Enables the support for USB 3.0 devices on legacy operating systems (OS). [Disabled] Disables the function. EHCI Hand-off [Disabled] [Enabled] Enables the support for operating systems without an EHCI hand-off feature. [Disabled] Disables the function. 2.5.4 NB Conguration IGFX Mult ...

  • Asus F1A75-V EVO - page 63

    Chapter 2: BIOS information 2-21 ASM1061 Storage Controller [AHCI Mode] [Disabled] Disables the ASM1061 Storage controller . [IDE Mode] Enables the IDE Mode. [AHCI Mode] Enables the AHCI Mode. ASM1061 Storage OPROM [Enabled] [Enabled] Enables the ASM1061 Storage OPROM. [Disabled] Disables the ASM1061 Storage OPROM. Realtek LAN Controller [Enabled] ...

  • Asus F1A75-V EVO - page 64

    2-22 ASUS F1A75-V EVO 2.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Main Ai T weaker Advanced Monitor Boot T ool Exit Version 2.00.1201. Copyright (C) 201 1 American Megatrends, Inc. CPU T emperature →← : Select Screen ↑↓ : Select Item Enter: Select +/-: Change Opt ...

  • Asus F1A75-V EVO - page 65

    Chapter 2: BIOS information 2-23 2.6.1 CPU T emperature / MB T emperature [xxxºC/xxxºF] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures. 2.6.2 CPU / Chassis / Power Fan Speed [xxxx RPM] or [Ignore] / [N/A] The onboard hardwa ...

  • Asus F1A75-V EVO - page 66

    2-24 ASUS F1A75-V EVO 2.6.4 Chassis Q-Fan Control [Disabled] [Disabled] Disables the Chassis Q-Fan control feature. [Enabled] Enables the Chassis Q-Fan control feature. Chassis Fan Speed Low Limit [600 RPM] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to disable or set the chassis fan warning speed. Con ...

  • Asus F1A75-V EVO - page 67

    Chapter 2: BIOS information 2-25 2.7 Boot menu The Boot menu items allow you to change the system boot options. 2.7.1 Bootup NumLock State [On] [On] Sets the power-on state of the NumLock to [On]. [Off] Sets the power-on state of the NumLock to [Off]. 2.7.2 Full Screen Logo [Enabled] [Enabled] Enables the full screen logo display feature. [Disabled ...

  • Asus F1A75-V EVO - page 68

    2-26 ASUS F1A75-V EVO 2.7.4 Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM messages will be displayed only if the third-party manufacturer had set the add-on device to do so. 2.7.5 Setup Mode [EZ Mode] [A d va n ce d M od e ] Sets Adva ...

  • Asus F1A75-V EVO - page 69

    Chapter 2: BIOS information 2-27 2.8 T ools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. Main Ai T weaker Advanced Monitor Boot T ool Exit Be used to update BIOS EFI BIOS Utility - Advanced Mode > ASUS EZ Flash 2 Utility > ASUS O.C. Prole & ...

  • Asus F1A75-V EVO - page 70

    2-28 ASUS F1A75-V EVO 2.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items. Y ou can access the EZ Mode from the Exit menu. Load Optimized Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you ...

  • Asus F1A75-V EVO - page 71

    ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.asus.com ASUS COMPUTER INTERNA TIONAL (America) Address 800 Corporate Way , F ...

  • Asus F1A75-V EVO - page 72

    EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTek COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C . Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Motherb ...

Fabbricante Asus Categoria Motherboard

I documenti che otteniamo dal fabbricante del dispositivoAsus F1A75-V EVO possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Asus
- manuali per l’uso F1A75-V EVO
- schede prodotto Asus
- opuscoli
- o etichette energetiche Asus F1A75-V EVO
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Asus F1A75-V EVO.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Asus F1A75-V EVO, manuali di manutenzione, brevi manuali o manuali utente Asus F1A75-V EVO. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Asus F1A75-V EVO.

Manuali per l’uso simili

Manuale completo del dispositivo Asus F1A75-V EVO, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Asus F1A75-V EVO dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Asus F1A75-V EVO.

Il manuale per l’uso completo Asus, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Asus F1A75-V EVO - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Asus F1A75-V EVO, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Asus F1A75-V EVO che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Asus F1A75-V EVO - che ci dovrebbe aiutare nei primi passi durante l'uso Asus F1A75-V EVO
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Asus F1A75-V EVO
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Asus F1A75-V EVO in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Asus F1A75-V EVO?

Utilizza il modulo sottostante

Se non hai risolto il problema con Asus F1A75-V EVO con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Asus F1A75-V EVO è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)