-
JVC HR-S6965EK - page 1
SAT /I b 0000 SP/LP AUTO/PDC 24H EXPRESS 1 3 2 PR -- / + PUSH / TURN S-VHS VCR H R-S6965EK VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0769-001B 625 – –:– – AUDIO 0000 VPS/PDC 3 5 3 2 4 30 SEC ? PR PR PR ENTER LP00000-000 VCR/TV i HR-S6965EK-Cover 8/22/03, 05:12 PM 1 ...
-
JVC HR-S6965EK - page 2
safety first 2 Safety P r ecautions The rating plate and the safety caution are on the rear of the unit. WARNI NG: DANGEROUS V OL T AGE INSI DE WARNI NG: T O PR EVENT FIR E OR SHOCK HAZA RD, DO NO T EXPOSE THI S UNIT T O RAIN OR MOISTURE. IMPORT ANT ■ Please read the various precautions on pages 2–4 of this instruction manual before installing ...
-
JVC HR-S6965EK - page 3
safety first 3 When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear.) When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be ...
-
JVC HR-S6965EK - page 4
safety first 4 Some Do ’ s And Don ’ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the eq ...
-
JVC HR-S6965EK - page 5
Contents Diagrams of Equipment ................................ 6 Equipment K ey ............................................. 7 W elcome to JVC ............................................ 8 Three-Step Quick Start ............................... 10 Basic F eatures ............................................ 13 Advanced F eatures ................. ...
-
JVC HR-S6965EK - page 6
diagr ams of equipment 6 front p anel disp l a y rear p anel remo te control *DECODER function is not available in the UK. SA T /I b 0000 SP/LP AUT O/PDC 24H EXPRESS 1 3 2 PR -- / + PUSH / TURN S-VHS VCR 1 2 3 4 5 6 7 8 9 10 11 12 13 14 ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER ENTREE/SORTIE IN/OUT SORTIE RF OUT ANTENNE SORTIE OUT R L AUDIO L-1 L-2 ...
-
JVC HR-S6965EK - page 7
equipment key 7 Diagr am K ey * DECODER function is not available in the UK. FRONT P ANEL 1 ST AN DB Y/ON o Button turns V CR on/off (loading a cassette also turns power on). 2 Cassette Loading Slot is where cassette is inserted; door closes. 3 24H EXPR ESS c Button enables 24H Express Timer Programming. 4 Advanced JOG Dial enables picture search, ...
-
JVC HR-S6965EK - page 8
wel come t o jv c 8 W elcome to JV C Thank you for choosing JV C. W e hope that you will get many hours of enjo y- ment from y our new unit. In just three easy steps you will be r eady to enjoy the ex ceptional perfor - mance of your new V CR. More detailed instructions begin on page 10. They will explain how to use the many sophisticated features ...
-
JVC HR-S6965EK - page 9
wel come t o jv c 9 GETTING EVERYTHING READY (continued) connect cables Connect the cables as indicated in the diagram ( below ), using the TV Aerial Cable , the RF Cable and the 21-pin SC ART Cable ( not provided ). sc art and rf SCART is a recommended option because its use impro ves the quality of the picture. If connecting to a stereo TV you wi ...
-
JVC HR-S6965EK - page 10
three-step q uick st art 10 FINISH AUTO SETUP Press and move on to Step 2 to check the results. oops! If there is a power cut or you accidentally press a button during Auto Setup , turn the VCR off and then on again. Re-perform Auto Setup . before y ou s t art Check that the VCR is turned off and no cassette is inserted L oad the battery into the R ...
-
JVC HR-S6965EK - page 11
three step quick st art 11 Check the R esults When Auto Setup finishes, you will see one of the three following examples on the VCR display panel: The Preset Positions and the Clock hav e been set successfully Go straight to Step 3 (20:00 used as example only). The Preset Positions hav e been set successfully but the Clock has not Perform Clock Set ...
-
JVC HR-S6965EK - page 12
three-step q uick st art 12 HR-S6965EK-EN/p08-12 2/19/03, 07:54 PM 12 ...
-
JVC HR-S6965EK - page 13
Basic F eatur es Playback ..................................................... 14 Playback F eatures ...................................... 16 R ecording ................................................... 18 VIDEO Plus+ ® Timer Pr ogramming ............ 21 Express Timer Pr ogramming ...................... 24 24H Express T imer Pr ogramming ..... ...
-
JVC HR-S6965EK - page 14
basic fea t ures 14 before y ou s t art T urn the TV on T une the TV to your Video Channel or to its A V mode ntsc t apes If an NTSC tape is played, ‘NTSC a PA L ’ appears on screen for about 5 seconds Some TVs will shrink the picture and place black bars at the top and bottom of the screen. This is not a malfunction but you may lose some on-sc ...
-
JVC HR-S6965EK - page 15
basic fea t ures 15 R ewind and F ast F orward During Stop Mode: re wind Press the < button on the Remote Control or turn the JOG Dial to the left. f a st forward Press the > button on the Remote Control or turn the JOG Dial to the right. Video Heads Cleaning The heads get dirty in the following cases: • in an environment prone to extreme t ...
-
JVC HR-S6965EK - page 16
basic fea t ures 16 Playback F eatures Adv anced JOG Dial The JOG Dial can be found on the front right of the VCR. It has various functions, such as picture search ( this page and pg. 17), selecting preset position ( pg.18), 24H Express Timer Programming ( pg. 26), etc. Pause During Playback There are two ways to view a still picture du ...
-
JVC HR-S6965EK - page 17
basic fea t ures 17 Slow Motion This VCR will play your cassette forwards or backwards in slow motion. You can make it do this in one of three ways: method one During playback, turn the JOG Dial one click to the left for forward slow motion. To play in reverse slow motion, continue to turn the JOG Dial to the left one more time. method two During s ...
-
JVC HR-S6965EK - page 18
basic fea t ures 18 before y ou s t art T urn the TV on T une the TV to your Video Channel or to its A V mode Choose a blank cassette which has the record safety tab still in place R ecord Safety T ab L oad the cassette into the V CR (see page 14) – –:– – AUDIO 0000 VPS/PDC 3 5 3 2 4 30 SEC ? PR PR PR ENTER LP00000-000 VCR/TV i 3 PR PR R ec ...
-
JVC HR-S6965EK - page 19
basic fea t ures 19 Notes on R ecording When using both the RF and SCART connections, you can switch between TV and VCR by pressing the T V/V CR button on the Remote Control. If the tape reaches its end during recording, the recording stops and “ U ” and “ , ” on the display panel blink. Press S / 0 on the VCR to eject the tape or press < ...
-
JVC HR-S6965EK - page 20
basic fea t ures 20 R ecording R esume F unction If there is a power cut during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the VCR unless the VCR’s memory backup has expired. Instant T imer R ecording This method allows you to quickly set the VCR to record in 30 min ...
-
JVC HR-S6965EK - page 21
basic fea t ures 21 before y ou s tar t Make sure that the VC R’ s clock is set correctly Insert a cassette with the safety tab in place T urn on the TV and select the V ideo channel or the A V Mode VIDEO Plus + ® T imer Pr ogr amming The VIDEO Plus+ system uses the code numbers – called PlusCode numbers – printed after each programme in you ...
-
JVC HR-S6965EK - page 22
basic fea t ures 22 set t ap e speed You can change the tape speed between Standard Play (SP) and Long Play (LP) by pressing / . set channel position number Make sure the channel position you wish to record is displayed. If “ TV P ROG ” displays “ – – ”, set the Channel Position number correctly. Press PR or PR button to input the chann ...
-
JVC HR-S6965EK - page 23
basic fea t ures 23 Engage Timer Mode You must now put the VCR into Timer Mode by pressing c otherwise no recording will take place. c will appear on the display panel. Make sure that the VCR turns off automatically. To disengage the Timer Mode, press c again. If a video tape with the safety tab removed is loaded, c , Play indicator ( , ) and Recor ...
-
JVC HR-S6965EK - page 24
basic fea t ures 24 before y ou s t art Make sure that the VC R’ s clock is set correctly Insert a cassette with the safety tab in place T urn on the TV and select the V ideo channel or the A V Mode E xpr ess T imer P r ogr amming If you do not kno w the PlusCode number for the progr amme that you wish to record, follo w the instructions below to ...
-
JVC HR-S6965EK - page 25
basic fea t ures 25 – – : – – AUDIO 0000 VPS/PDC 3 5 3 2 4 30 SEC ? PR PR PR ENTER LP00000-000 VCR/TV i 0000 ENTER i 3 PR PR set pdc mode Press PDC (number key 7 ) to change between ON and OFF . Programme Delivery Control ( PDC ) is a service designed to ensure that timer recording still works in the event of a change in time of broadcast. ...
-
JVC HR-S6965EK - page 26
basic fea t ures 26 24H E xpr ess T imer P r ogr amming Y ou can program a timer recor ding that starts within 24 hours using the 24H EXPR E SS c button and the Adv anced JOG Dial on the VCR. enter program mode Press the 24H E XPRESS c button on the VCR. The Programme Start Time indicator starts blinking on the display panel. set st art time Turn t ...
-
JVC HR-S6965EK - page 27
basic fea t ures 27 Screen A Screen B Check, Cancel & Change Pr ogrammes Press c , then press o to disengage the timer mode. revie w the progr ammes Press C . The TV screen will display a list of the programmes set for timer recording (screen A). Pressing C again will cycle through each of the entries in the VCR’s memory (screen B). c ancel a ...
-
JVC HR-S6965EK - page 28
basic fea t ures 28 HR-S6965EK-EN/p21-28 2/19/03, 07:55 PM 28 ...
-
JVC HR-S6965EK - page 29
Adv anced F eatur es Picture Quality ........................................... 30 R ecording Accor ding T o T ape T ype.............. 3 2 The B.E.S.T . Picture System ...................... 34 Sound Modes ............................................ 35 Finding S pecific Scenes ............................ 36 Auto Satellite Progr am R ecording ... ...
-
JVC HR-S6965EK - page 30
ad v anced fea tures 30 Pictur e Quality Manual T r acking Your VCR is equipped with automatic tracking control. This will be adequate for most tapes and will automatically adjust the tracking to suit the particular tape in use but if you insert an old or worn tape, it may be necessary to manually adjust the track- ing in order to get the best pict ...
-
JVC HR-S6965EK - page 31
ad v anced fea tures 31 Picture Contr ol This feature allows you to select the most appropriate picture quality according to the type of tape or use of this VCR. The default setting is AUT O . get to the mode set screen Press . Move the highlight bar to MODE SET using the PR and PR buttons and press (or E ). select picture control mode Move the hig ...
-
JVC HR-S6965EK - page 32
ad v anced fea tures 32 R ecor ding Accor ding T o T ape T ype Super VHS ET (S-VHS ET) This function allows you to record in SP mode on VHS tapes with S-VHS picture quality. You can play back S-VHS ET recordings on most S-VHS recorders and on VHS recorders equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice: some recorders are not compatibl ...
-
JVC HR-S6965EK - page 33
ad v anced fea tures 33 Super VHS (S-VHS), S-VHS ET and VHS Your VCR can record in S-VHS, S-VHS ET or VHS. T o r ecord in S-VHS: Perform the steps below to set S-VHS to ON . Then, insert a cassette marked ‘S-VHS’, the S-VHS indicator will light on the display panel. The S-VHS recording mode will be selected. T o r ecord in S-VHS ET on a VHS cas ...
-
JVC HR-S6965EK - page 34
ad v anced fea tures 34 about b.e.s.t. Works in SP and LP modes Works before Timer Recor ding B.E.S.T . data is lost when tape is ejected Pressing the T button on VCR does not star t Instant Timer Recording while B.E.S.T . is turned ON a pause of 7 seconds a During B.E.S.T . B.E.S.T . complete The B.E.S.T . Pictur eS ystem The Biconditional Equa ...
-
JVC HR-S6965EK - page 35
ad v anced fea tures 35 before y ou s tar t Set On Screen Display (O.S.D.) to ON ( 墌 pg. 42) Sound Modes NIC AM Ster eo and Bilingual Broadcasts This VCR is equipped with a digital stereo sound decoder ( NICAM ) which makes the reception of stereo and bilingual broadcasts possible. When the VCR is tuned to a different preset, the type of broadcas ...
-
JVC HR-S6965EK - page 36
ad v anced fea tures 36 Finding S pecific Scenes Skip Search During playback, press 3 up to 4 times. Each press of the 3 button will cause the VCR to go into fast-motion playback for a period of 30 seconds. Normal playback resumes automatically. • To return to normal playback during a Skip Search, press . . Index Search Each time you record a pro ...
-
JVC HR-S6965EK - page 37
ad v anced fea tures 37 Auto Satellite P r ogr amme R ecording Auto R ecord fr om Satellite R eceiver This facility allows a programme timer-recorded using the satellite receiver to be recorded on the VCR. connect up Connect your satellite receiver, TV and VCR ( see diagram below ). ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER ENTREE/SORTIE IN/OUT SOR ...
-
JVC HR-S6965EK - page 38
ad v anced fea tures 38 programme sa tellite receiv er Enter the details of the programme into your satellite receiver ( see receiver manual ) and put a tape in the VCR. set tap e speed Press / on the Remote Control to set the tape speed to either SP or LP . engage vcr in aut o mode Press and hold SA T c ( | )on the VCR for about 2 seconds. The SA ...
-
JVC HR-S6965EK - page 39
ad v anced fea tures 39 Editing L-1 OUTPUT S etting The L-1 IN/OUT connector delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-1 OUTPUT to the appropriate mode depending on the type of unit connected to the rear panel L-1 IN/OUT connector of this ...
-
JVC HR-S6965EK - page 40
ad v anced fea tures 40 [ 1 ] a k [MENU]: EXIT OUTPUT/INPUT SET L-1 OUTPUT VIDEO L-2 INPUT VIDEO L-2 I NPUT Setting The L-2 IN/DECODE R connector accepts either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-2 INPUT to the appropriate mode depending on the out ...
-
JVC HR-S6965EK - page 41
ad v anced fea tures 41 Editing Using Another V CR connect up Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated. A When using your VCR as the player ... ... connect its L-1 IN/OUT connector to another VCR. B When using your VCR as the recorder ... ... connect its L-2 IN/DECODE R or L-1 IN/OUT co ...
-
JVC HR-S6965EK - page 42
ad v anced fea tures 42 A Y our V CR as the Player B Y our V CR as the Recor der ENTREE ANT. IN ENTREE/DECODEUR IN/DECODER ENTREE/SORTIE IN/OUT SORTIE RF OUT ANTENNE SORTIE OUT R L AUDIO L-1 L-2 010 TV Set Video Channel or A V Mode Another V CR Y our VCR 21-pin SCART Cables (not provided) RF Cable (pro vided) ENTREE ANT. IN ENTREE/DECODEUR IN/DECOD ...
-
JVC HR-S6965EK - page 43
ad v anced fea tures 43 Other F unctions On-Screen Display (O.S.D.) This function allows you to turn the on-screen information ON or OFF . get to the mode set screen Press , move the highlight bar to MODE SET using the PR and PR buttons and press (or E ). enable/disable osd The default setting for OSD is ON . Move the highlight bar to OSD using the ...
-
JVC HR-S6965EK - page 44
ad v anced fea tures 44 Po wer Sav e Mode You can reduce the power consumption while the VCR is turned off. get to the mode set screen Press . Move the highlight bar to MODE SET using the PR and PR buttons and press (or E ). select po wer sa v e mode Move the highlight bar to POWER SA VE using the PR and PR buttons. Press (or E ) to select ON or OF ...
-
JVC HR-S6965EK - page 45
ad v anced fea tures 45 Auto T imer When the AUTO TI ME R is set to ON , the timer is automatically engaged when the VCR power is turned off and automatically disengaged when the VCR is powered back on. get to the mode set screen Press . Move the highlight bar to MODE SET using the PR and PR buttons and press (or E ). enable/disable auto timer Sele ...
-
JVC HR-S6965EK - page 46
ad v anced fea tures 46 Connection to a Ster eo S ystem It is possible to connect your VCR to a suitably equipped stereo system and listen to the soundtrack through the ster eo system. connect up Connect the AUDIO OUT L and R connecters on the VCR to the AUX IN or T APE MONITOR connecters on your stereo. See diagram below . NOTES ON STEREO CONNECTI ...
-
JVC HR-S6965EK - page 47
ad v anced fea tures 47 before y ou s tar t The power cor d must be plugged in and connected to the VCR The V CR must be turned off and no cassette inser ted The Remote Contr ol must have batteries inser ted The TV set must be turned on V ideo Channel Set The VCR can send picture signals to the TV set in one of two ways; RF (ordinary cable included ...
-
JVC HR-S6965EK - page 48
ad v anced fea tures 48 The V CR needs to find, identify and memorise all av ailable stations in your area in order to record pr ogrammes correctly . Once done, pressing the PR or PR buttons enables you to jump to the available channels without going via any v acant channels. This channel search can be done either automatically or manually . Y ou s ...
-
JVC HR-S6965EK - page 49
ad v anced fea tures 49 Manual Channel Setup get to the confirma tion screen Press . Move the high- light bar to MANUAL CH SET using the PR and PR buttons and press (or E ). select position Use the button on the Remote Control to move the highlight bar to a vacant position then press . In this example, we have chosen position6. select band When ...
-
JVC HR-S6965EK - page 50
ad v anced fea tures 50 3 PR PR PR 01 02 03 04 05 06 07 CH 26 33 23 30 37 [ 10 ] a k : EDIT a [ x ]: DELETE [MENU]: EXIT ID BBC1 BBC2 ITV CH4 CH5 - - - - - - - - PR 08 09 10 11 12 13 14 CH ID - - - - - - - - - - - - - - - - - - - - - - - - - - - - Change S tation Name get to the confirma tion screen Press . Move the highlight bar to MANUAL CH SET u ...
-
JVC HR-S6965EK - page 51
ad v anced fea tures 51 3 PR PR Change Station P reset P osition get to the confirma tion screen Press . Move the highlight bar to MANUAL CH SET using the PR and PR buttons and press (or E ). select item Use the button on the Remote Control until the item you want to move begins blinking then press . The station name (ID) and its channel (CH) numbe ...
-
JVC HR-S6965EK - page 52
ad v anced fea tures 52 ST ATION NAME ID Grampian TV GRM P Hessen1 HR1 Hessen3 HR3 HR T HR T HTV HTV ITV Network ITV Kabelkanal KABL London LNDN MD R MD R MTV MTV Nord3 N3 NDR1 ND R1 NDR3 ND R3 NED1 NED 1 NED2 NED 2 NED3 NED 3 Network 2 N ET2 NRK NRK N-TV N-TV Offener Kanal OKAN ORF1 O RF1 ORF2 O RF2 ORF3 O RF3 OWL 3 OWL3 Premiere PRMI PR07 PR07 RA ...
-
JVC HR-S6965EK - page 53
ad v anced fea tures 53 Region T ransmitter BBC1 BBC2 ITV CH4 CH5 London & South-East Bluebell Hill 40 46 43 65 — Crystal Palace 26 33 23 30 37 D o v e r 5 05 66 65 3— Heathfield 49 52 64 67 — Oxford 57 63 60 53 49 South-W est Beacon Hill 57 63 60 53 — Caradon Hill 22 28 25 32 — Huntshaw Cross 55 62 59 65 67 Redruth 51 44 41 47 37 Sto ...
-
JVC HR-S6965EK - page 54
ad v anced fea tures 54 [ 1 ] a k [MENU]: EXIT CLOCK SET TIME DA TE YEAR 0: 00 01 . 01 03 JUST CLOCK : ON TV PR. : 1 Clock S et Y ou should only need to perform this function if: • Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel Set • The VCR’s memory backup has expired • You want to change the Just ...
-
JVC HR-S6965EK - page 55
subsidiar y inf ormation 55 Question and Answ ers PLA YBACK Q: What happens if the end of the tape is reached during playback or search? A: The tape is automatically rewound to the beginning. Q: Can the VCR indefinitely remain in the still mode? A: No. It stops automatically after 5minutes to protect the heads. Q: During search, slow, still and ...
-
JVC HR-S6965EK - page 56
subsidiar y inf ormation 56 T roubleshooting SYMPT OM POSSIBL E C AUSE CORRECTIVE ACTION POWER 1. No power is applied to the V CR. 2. The clock is functioning properly , but the VC R cannot be pow ered. 3. The Remote Control won’t function. T APE TRANSPORT 1. The tape does not run during recording. U lights up and preset position blinks on the di ...
-
JVC HR-S6965EK - page 57
subsidiar y inf ormation 57 SYMPT OM POSSIBL E C AUSE CORRECTIVE A CTION RECORDING 1. Recor ding cannot be star ted. 2. TV broadcasts cannot be recor ded. 3. T ape-to-tape editing is not possible. 4. Camcorder recording is not possible. 5. U and , on the display panel won’t stop blinking. TIMER RECORDING 1. Timer recor ding won’t work. 2. Timer ...
-
JVC HR-S6965EK - page 58
subsidiar y inf ormation 58 SYMPT OM POSSIBL E C AUSE CORRECTIVE ACTION TIMER RECORDING (cont.) 7. U and , on the display panel won’t stop blinking. • The end of the tape was reached during Instant Timer Recor ding. The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entir ...
-
JVC HR-S6965EK - page 59
list of terms 59 List of T erms Manual Tracking ...................................................... 30 A A A A A Auto Channel Setup ................................................. 48 Auto Satellite Program Recording ........................... 37 Auto Power ............................................................... 45 Auto Setup ......... ...
-
JVC HR-S6965EK - page 60
HR-S6965EK COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD. EK Printed in Malaysia 0203-AH-YL-PJ VICTOR COMP ANY OF JAPAN, LIMITED s p e c i f i c a t i o n s g e n e r a l Power r equirement : AC 220 V – 240 V Ó , 50 Hz/60 Hz Power consumption : on : 16 W , off : 3.5 W Operating T emperature : 5°C to 40°C Stor age T emperature: –20°C to 60? ...
Hai una domanda su JVC HR-S6965EK?
Utilizza il modulo sottostante
Se non hai risolto il problema con JVC HR-S6965EK con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con JVC HR-S6965EK è probabile che voglia condividere il modo di risolverlo.