Italiano dropdown-ico

Manuale per l’uso Wilton JWBS-16B

32 pagine 2.42 mb
Scarica

Vai alla pagina of 32

Summary
  • Wilton JWBS-16B - page 1

    Operating Instructions and Parts Manual 16-Inch Woodworking Band Saw Model JWBS-16B WMH TOOL GROUP, Inc. 2420 Vantage Drive Elgin, Illinois 60124 Part No. M-708749B Ph.: 800-274-6848 Revision A 03/08 www.wmhtoolgroup.com Copyright © 2008 WMH Tool Group, Inc. This Manual is Bookmarked ...

  • Wilton JWBS-16B - page 2

    2 Warranty and Service WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers lo cated throughout the United States can giv e you qu ick service. In most cases, any of these WMH Tool Group Authorized Servic e Centers can authorize warranty repair, assist you in obtai ...

  • Wilton JWBS-16B - page 3

    3 Table of Contents Warranty and Service ........................................................................................................... ......................... 2 Table of Contents .............................................................................................................. ............................ 3 Warning ..... ...

  • Wilton JWBS-16B - page 4

    4 Warning 1. Read and understand the entire o wner's manual before attemptin g assembly or operation. 2. Rea d and understand the warnings posted on the mach ine and in this manual. Failure to comply with all of these warnings may cause seri ous injury. 3. Replace the warning labels if they become obscu red or removed. 4. This band saw is desi ...

  • Wilton JWBS-16B - page 5

    5 blahblahblah 20. Make your workshop child proof with padlocks , master switc hes or by removing starter keys. 21. Give your work undivided attention. Looking a r ound, carrying on a conversation and “horse -play” are careless acts that can result in seriou s injury. 22. Maintain a balanced stance at all times so that you do not fall or lean a ...

  • Wilton JWBS-16B - page 6

    6 Introduction This manual is provided by Jet coveri ng the sa fe operation and maintenance procedu res for model JWBS-16B Band Saw. This manual co ntains instruct ions on installation, safety precautio ns, general operating procedures, maintenance in structions and parts breakdown. This ma chine has been designed and constructed to provide years o ...

  • Wilton JWBS-16B - page 7

    7 Grounding Instructions This machine must be grounded while in use to protect the opera tor from electric shock. In the event of a malfunction or br eakdown, grounding provides a path of least resistance fo r electric current to reduce the risk of electric shock. This machine i s equipped with an electri c cord having an equipmen t-grounding condu ...

  • Wilton JWBS-16B - page 8

    8 Unpacking Remove the packing material from t he band saw. Note: Remove the plywood and bolts from the base. Inspect the machine for damage. Report any damage to your distributor and shipping agent. Move the saw to its permanent working location. The site should be dry, well lit, and have enough room to handle long stock and the service and/or adj ...

  • Wilton JWBS-16B - page 9

    9 Assembly and Setup Base Support Extension 1. Attach straps (A, Fig. 1A) to extension base (B, Fig. 1A) with (2) 5/16-18 button head cap screws (C, Fig. 1A) and with (2 ) 5/16 flat washers (D, Fig. 1A). If needed punch holes through striping decal. NOTE: Leave screws slightly loose. 2. Repeat for opposite end of extension ba se. 3. Insert straps t ...

  • Wilton JWBS-16B - page 10

    10 Adjusting Blade Tension 1. Disconnect machine fro m the power source, unplug. 2. Turn blade tensi on hand wheel (E, Fig. 2) counter-clockwise to tension blade, and clockwise to loosen the tension. A gauge on the upper wheel slide bracket (F, Fig. 2) indicates the approximate tension a ccording to the width of the blade. The JWBS-16B comes with a ...

  • Wilton JWBS-16B - page 11

    11 Lower Blade Guide Adjustment Disconnect machine from the power source, unplug before making any adjustments! Blade teeth are sharp! Use care when working near the saw blad e. Failure to comply may cause serious injury! 1. Blade tensi on and tracking must be properly adjusted prior to blade guide setup. 2. The blade guard has been removed in Figu ...

  • Wilton JWBS-16B - page 12

    12 Mounting the Table 1. Mount the trunnion suppo rt bracket (A, Fig. 5) to the bandsaw with four 5/16” x 1-1/2 ” hex cap bolts, and four 5/16” lock washers (B, Fig. 5). 2. Remove the round table insert (C, Fig. 5) found where the blade goes through the table. Also, remove the table pin (D, Fig. 5) found on the side of the table. 3. Slide saw ...

  • Wilton JWBS-16B - page 13

    13 Rail Assembly (optional accessory) 1. Attach the front rail (A, Fig. 8) to the cast iron table with two 1/4” x 5/8” hex cap bol ts, two 1/4” lock washers, and two 1/4” flat washers. Bolts should be in approximately the center of the slot. Hand tighten only at this time. 2. Attach the rear rail (B, Fig. 8) to the table with two 1/4” x 5 ...

  • Wilton JWBS-16B - page 14

    14 4. Check the clearance bet ween the table and the fence. The gap should be the same at the front of the table as it is at the rear. If the gap width is different, adjust the foot at the rear of the fence until the gap width is the same, Figure 11. Note: You can also adjust the front rail, or rea r rail up, or down to achieve the proper cl earanc ...

  • Wilton JWBS-16B - page 15

    15 Tilting the Table 1. Disconnect the machine from the power source, unplug. 2. Loosen the lock knobs (A, Fig. 13). 3. Tilt table up to 45 degre es to the right, or up to 10 degrees to the left. 4. Tighten the lock knobs. Note : Table stop bolt (B, Fig. 13) must be removed to tilt table to the left. Height Scale Adjustment 1. Disconnect the machin ...

  • Wilton JWBS-16B - page 16

    16 Changing Blades Disconnect machine from the power source, unplug! Blade teeth are sharp! Use care when handling the saw blade. Failure to comply may cause serious injury ! 1. Remove the table insert (A, Fig. 16), and table pin (B, Fig. 16). 2. Lower th e upper blade guide assembl y about half way by loosening the lock knob (F, Fig. 17) and turni ...

  • Wilton JWBS-16B - page 17

    17 Replacing V-Belt 1. Disconnect the machine from the power source. 2. Release blade tension by turnin g blade tension hand wheel clockwise. 3. Release belt tension by loosening the two hex cap bolts (A, Fig. 19). Raise the motor and tighten hex cap bolts to take the tensi on off the belt. 4. Open the lower wheel door and remove hex nut, and washe ...

  • Wilton JWBS-16B - page 18

    18 Electrical Connections All electrical connections must be done by a qualified electrician! Failure to comply may result in loss of property and/or serious injury! The JWBS-16B is rated at 1-1/2 HP, 1Ph, 115V/230V, prewired 115V. The bandsaw comes with a 115V plug (A, Fig. 22). If you switch the motor to 230V a plug needs to be purchased for the ...

  • Wilton JWBS-16B - page 19

    19 Troubleshooting Trouble Possible Cause Solution Saw stops or will not start 1. Saw unplugged 2. Fuse blown or circuit breaker tripped 3. Cord damaged 1. Check plug connection s 2. Replace fuse or re set circuit breaker 3. Replace cord Does not make ac curate 45 ° or 90 ° cuts 1. Stop not adjusted correctly 2. Angle pointer not set accurately 3 ...

  • Wilton JWBS-16B - page 20

    20 Upper Wheel Assembly Index No. Part No. Description Size Qty 1 ............... JWBS16B-101 ......... Saw Body ............................................................. ...................... .............. 1 2 ............... TS-0152011 ............. Carr iage Bolt ........................................................ 5/16-18x1 .......... ...

  • Wilton JWBS-16B - page 21

    21 Upper Wheel Assembly ...

  • Wilton JWBS-16B - page 22

    22 Lower Wheel and Motor Assembly Index No. Part No. Description Size Qty 1 ............... JWBS18-201N ......... Bearing Base ....................................................... ........................ ............ 1 2 ............... JWBS20-62 .............. Adjusting Bolt ....................................................... ............. ...

  • Wilton JWBS-16B - page 23

    23 Lower Wheel and Motor Assembly Index No. Part No. Description Size Qty 52 ............. TS-0680031 ............. Flat Washer .......................................................... 5/16 ................ ............. 8 53 ............. TS-0720081 ............. Loc k Washer ........................................................ 5/16 ........ ...

  • Wilton JWBS-16B - page 24

    24 Blade Guides Assembly Index No. Part No. Description Size Qty 1 ............... TS-0051051 ............. Hex Ca p Screw .................................................... 5/16-18x1 .............. ...... 4 2 ............... TS-0720081 ............. Lock Washer ........................................................ 5/16 ................. ..... ...

  • Wilton JWBS-16B - page 25

    25 Blade Guides Assembly ...

  • Wilton JWBS-16B - page 26

    26 Table Assembly Index No. Part No. Description Size Qty 1 ............... JWBS16-401 ............ Table .................................................................... ................ .................... 1 2 ............... JWBS20-144 ............ Table Insert .......................................................... ................... . ...

  • Wilton JWBS-16B - page 27

    27 Table Assembly ...

  • Wilton JWBS-16B - page 28

    28 Fence & Miter Assembly (optional accessory) Index No. Part No. Description Size Qty 1 ............... JWBS18-401 ............ Lock Knob ............................................................ .................... ................ 1 2 ............... TS-0680021 ............. Flat Washer ................................................... ...

  • Wilton JWBS-16B - page 29

    29 Fence & Miter Assembly (optional accessory) ...

  • Wilton JWBS-16B - page 30

    30 Wiring Diagram ...

  • Wilton JWBS-16B - page 31

    31 Notes ...

  • Wilton JWBS-16B - page 32

    32 WMH Tool Group, Inc. 2420 Vantage Drive Elgin, Illinois 60124 Phone: 800-274-6848 www.wmhtoolgroup.co m ...

Fabbricante Wilton Categoria Cordless Saw

I documenti che otteniamo dal fabbricante del dispositivoWilton JWBS-16B possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Wilton
- manuali per l’uso JWBS-16B
- schede prodotto Wilton
- opuscoli
- o etichette energetiche Wilton JWBS-16B
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Wilton JWBS-16B.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Wilton JWBS-16B, manuali di manutenzione, brevi manuali o manuali utente Wilton JWBS-16B. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Wilton JWBS-16B.

Manuali per l’uso simili

Manuale completo del dispositivo Wilton JWBS-16B, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Wilton JWBS-16B dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Wilton JWBS-16B.

Il manuale per l’uso completo Wilton, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Wilton JWBS-16B - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Wilton JWBS-16B, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Wilton JWBS-16B che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Wilton JWBS-16B - che ci dovrebbe aiutare nei primi passi durante l'uso Wilton JWBS-16B
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Wilton JWBS-16B
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Wilton JWBS-16B in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Wilton JWBS-16B?

Utilizza il modulo sottostante

Se non hai risolto il problema con Wilton JWBS-16B con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Wilton JWBS-16B è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)