Manuale per l’uso Graco 3D150

28 pagine 1.1 mb
Scarica

Vai alla pagina of 28

Summary
  • Graco 3D150 - page 1

    Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 Copyright 2006, Graco Inc. is r egistered to I. S. EN ISO 9001 311688D Instr uctions/P ar ts List Tr i t o n ® 3D150 Diaphra gm Pump Used to pump waterborne and sol vent-based paints and catalysts. P ar t No. 253704, Series B 3:1 Ratio Air-operated Doub le Diaphragm Pump, with BSPP Fittings P ar ...

  • Graco 3D150 - page 2

    2 311688D Contents W arning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 General Information . . . . . . . . . . . . . . . . . . . . . . 5 Tightening Thre aded F asteners Bef ore First Use 5 Mounting t he Pump . . . . . . . . . . . . . . . . . ...

  • Graco 3D150 - page 3

    Warnings 311688D 3 Wa r n i n g s The f ollowing w ar nings are f or the setup , use, g rounding, maintenance , and repair of this equipment. Th e exclama- tion point symbol ale r t s you to a gener al warning and the hazard symbol r efer s to procedure-specifi c r isk. Ref er bac k to these wa r nings. Additio nal, product- specific w ar nings ma ...

  • Graco 3D150 - page 4

    Warnings 4 311688D T O XIC FLUID HAZARD Hazardous fluid or t oxic fumes can cause serious injur y or death if splashed in the e y es or on the skin, inhaled, or s wallow ed. • Know the sp ecific hazards of the fl uid you are using. • Store hazardous fluid in an ap prov ed container . Dispose of hazardous fluid according to all local, state and ...

  • Graco 3D150 - page 5

    Installation 311688D 5 Installation General Inf ormation •F IG . 2 is only a guide f or installing system compo- nents and acce ssori es. It is not an actual system design. Contact y our Gr aco distribut or f or assis- tance in designi ng a system to suit y our particular needs . • Alwa ys use Genuin e Graco P ar ts and Accessories, av ailab le ...

  • Graco 3D150 - page 6

    Installation 6 311688D Mounting the Pump • F or ease of oper ation and service, mount the pump so the air inlet, flu id inlet, and fluid outlet po r ts are easily accessible. • Mount the pump in a well- v entilated area with suffi- cient clearance on all sides f or oper ator access and ser vicing. • The pump must be moun ted hor izontally as ...

  • Graco 3D150 - page 7

    Installation 311688D 7 Air Line 1. Install the air line accessories as sho wn in F IG . 2. Be sure the air line supplying the accessories is grounde d. a. The fluid pressur e can be controlled with either an air regu lator (F) t o control th e air into th e pump , or with a fluid regu lator (H) to control th e fluid out of the pum p . b . Install a ...

  • Graco 3D150 - page 8

    Installation 8 311688D F IG . 2. T ypical Inst allation R B C D E F K A L G S M W Key: A TRIT ON 3D150 Pump B Bleed-type master air valv e (required for pump) C Air supply line D Air line filter E Air line shutoff va lve F Pump air regulator G Gun air regul ator (used in spra y system only) H Fluid pressure regulator (used in spra y system only) J ...

  • Graco 3D150 - page 9

    Installation 311688D 9 Gr ounding Ground all of this equipment: • Pump: use a ground wire and clamp . See F IG . 3. Loosen the g rounding scre w (X). Insert one end of a 12 ga (1.5 mm 2 ) minimum gr ound wire (Y) under the clamp and tig hten the scre w securely . Connect the other end of t he wire to a true ear th ground. F or a ground wire and c ...

  • Graco 3D150 - page 10

    Operation 10 311688D Operation Pressure Relief Pr ocedure 1. Shut off the air to th e pump. 2. Open the dispensing v alv e, if used. 3. Open the fluid dr ain v alve to re liev e all fluid pres- sure, ha ving a container r eady to catch the drainage . Flushing the Pump Bef ore First Use The pump wa s tested in oil. If oil could contamin ate the flui ...

  • Graco 3D150 - page 11

    Maintenance 311688D 11 Maintenance Lubrication Flushing and Storage Flush the pump of ten enough to pre v ent the fluid y ou are pumping fr om curing, dr ying, or freezing in the pump and damaging it . Fo llow the Pressure Relief Procedure on page 10 bef ore storing it f or an y length of time . Use a compatib le flushing fluid. Tightening Threaded ...

  • Graco 3D150 - page 12

    Troubleshooti ng 12 311688D T r oubleshooting Relie ve t he pressure (page 10) befo re checking o r servicing the equipment. Chec k all possible prob lems and causes bef ore disassemb ling the pump . Prob lem Cause Solution Pump cycles at stall or f ails to hold pressure a t stall. W or n check v alve balls (26), seats (31), or ball guide s (32). R ...

  • Graco 3D150 - page 13

    Repair 311688D 13 Repair Prepare the Pump f or Repair 1. Flush the pump if possible , page 11. 2. Relie v e the pressure, pag e 10. 3. Disconnect the ai r and fluid hoses . 4. Remov e the pum p from its mounting and tak e it to the work benc h. General Repair Notes F ault Indications During operation, check f or indications o f worn or dam- aged pa ...

  • Graco 3D150 - page 14

    Repair 14 311688D Replace the Diaphragms Disassembl y 1. Prepare the pump fo r repair of the cylinder-side dia- phragm. a. Remov e the 6 scre ws (39) and fluid co ver (3 7) from the housing side of t he pump . b . Press on the e xposed diap hragm (9) to fully e xtend the cylinder-sid e diaphragm. c. Replace the housing-side co ver and tighten the 6 ...

  • Graco 3D150 - page 15

    Repair 311688D 15 F IG . 4 Replace the Dia phragms TI" T orque to 1 6 N•m (12 ft-lb). 1 29* †‡ ◆ 1 37 54 7 29* †‡ ◆ 29* †‡ ◆ 38 37 29* †‡ ◆ 39 Cylinder Side 9* Housing Side 9* 1 1 ...

  • Graco 3D150 - page 16

    Repair 16 311688D Repair the Air V alve Disassembl y 1. Prepare the pump fo r repair , page 13 . 2. Remov e the air valv e sheet metal co v er (36) and f elt dampener (34) . 3. Unscrew the cylin der screws (21). 4. Remov e the v alv e cov er (20) with the f lat gasket (19†). 5. Use two scr ewdriv ers to lift out the air v alv e plate (16†) and ...

  • Graco 3D150 - page 17

    Repair 311688D 17 F IG . 5. Repair the Air V alve ti2130B 12 Lubricate. T orque to 3.1 N•m (28 in-lb) Align arrow on housing with point on air valve plate . 1 2 3 13† ◆ 14 19† ◆ 20 21 34 36 44 10 11† ◆ 14 15† 17† ◆ 18† ◆ 16† 14 12 13† ◆ 11† ◆ 1 1 1 1 1 1 3 2 55 ...

  • Graco 3D150 - page 18

    Repair 18 311688D Repair the Shaft and Bearings Disassembl y 1. Remov e the diaphragms. See page 13. 2. Disassemb le the air v alve . See page 16. 3. Remove the housing (54). • Slee ve clamp (6) is visible inside th e air valv e cavity . Spread the sleev e clamp (6) with p liers DIN 5254A, nomin al size 19, and at the same time, slide the shaft a ...

  • Graco 3D150 - page 19

    Repair 311688D 19 F IG . 6. Repair the Shaft Lubricate. T orque to 1 2 ft-lb (16 N•m) Align arrow on housing with point on air valv e plate. T orque to 2 8 in-lb (3.1 N•m) 1 2 3 4 4 2 3 20 13 † ◆ 14 12 † ◆ 11 10 † ◆ 11 1 †‡ ◆ 29 *9 37 39 34 38 37 *9 54 ◆✘ 7 ◆ 29* †‡ ◆ * †‡ ◆ 29 † ◆ 19 †16 18 † ◆ 17 ...

  • Graco 3D150 - page 20

    Repair 20 311688D Replace the Ball Chec k V alves Disassembl y 1. Remo ve fluid cov ers (see page 13) . Do not remov e housing (5 4). 2. Remov e the inlet and outlet ball checks (2 6-32). Note that the orientation of the inlet check par ts is diff erent than the outlet check pa r ts. (Se e F IG . 7.) 3. Replace all parts provided in Kit 245067. Rea ...

  • Graco 3D150 - page 21

    Repair 311688D 21 F IG . 7. Replace the Ball Check V alves ti2128B T orque to 12 ft-lb (16 N •m) Align 1 2 1 2 Inlet Ball Checks Outlet Ball Checks 29 ‡ ‡32 ‡26 ‡28 ‡29 1 32 ‡ 26 ‡ 31 ‡ 30 ‡ ✖ 27 ‡26 ‡32 ‡28 ‡29 30 ‡ ✖ 31 ‡ 26 ‡ 32 ‡ 29 ‡ 1 ...

  • Graco 3D150 - page 22

    Parts 22 311688D Pa r t s P art No. 253704, Series B P art No. 253705, Series B 1 ★ 32 ‡ 26 ‡ 31 ‡ 5 *9 23 33 22 12 10 15 † 44 34 † ◆ 19 † 16 † ◆ 18 † ◆ 17 20 *9 ◆❖ 2 4 ‡ 27 14 ‡ 26 35 ‡ 28 ‡ 32 * †‡ ◆ 29 † ◆ 11 † ◆ 13 24 40 39 54 7 ◆ 6 29* †‡ ◆ 37 38 37 36 21 30 ‡ ✖ 41 25 ♦ 8 55 ti213 ...

  • Graco 3D150 - page 23

    Parts 311688D 23 P art No. 253704 BSPP , Series B P art No. 253705 NPT , Series B ★ Included in Diaphra gm Housing Repair Kit. Order Kit 261665 f or 253704 pum ps and 261666 f or 253705 pumps . ◆ Included in Shaft Repair Kit 233841. ❖ Included in Bearing Repair Kit . Order Kit 15J647. * Included in Diaphragm Repair Kit 246011. † Included in ...

  • Graco 3D150 - page 24

    Technical Data 24 311688D T ec hnical Data Sound Pressure Le vels in dB(A) at 50 cpm (measured at 1 me ter from unit) Category Data Maximum flu id working pressure 300 psi (2.1 MP a, 21 bar) Maximum air in put press ure 100 psi (0.7 MP a, 7 bar) Ratio 3:1 Maximum permissible str oke frequency in cycles/ min 20 V olume per cycle (double stroke) 5 oz ...

  • Graco 3D150 - page 25

    Performance Chart 311688D 25 P erformance Chart T riton perf ormance test, 40, 70, 100 psi (.27, . 48, .69 MP a; 2.7, 4.8, 6. 9 bar) Cycles per minute Outlet Flow in gallons per minute Outlet Pressure in PSI Air Flow in SCFM 40 psi 70 psi 100 psi 40 psi (.2 7 MPa, 2. 7 bar) 70 psi (.48 MP a, 4.8 bar ) 100 psi (.69 MP a, 6.9 bar) ...

  • Graco 3D150 - page 26

    Dimensions 26 311688D Dimensions 234 mm 184 mm (7.2 in.) 104 mm (4.1 in.) (9.2 in.) Fluid Inlet; 253705 3/4 npt 253704 M26x1.5 Fluid Outlet; 253705 3/8 npt 253704 3/8 BSPP 9 mm (0.35 in.) 102 mm (4.0 in.) 66 mm (2.6 in.) diameter mounting holes Air Inlet 253705 1/4 npt 253704 3/8 BSP P TI2133A 1 TI2133A 2 ...

  • Graco 3D150 - page 27

    Dimensions 311688D 27 ...

  • Graco 3D150 - page 28

    All written and visual data contained in this document reflects the latest product information available at the time of publica tion. Graco reserves the right to make changes a t any time without notice. This manual contains English. MM 311688 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. P.O. BOX 14 ...

Fabbricante Graco Categoria Heat Pump

I documenti che otteniamo dal fabbricante del dispositivoGraco 3D150 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Graco
- manuali per l’uso 3D150
- schede prodotto Graco
- opuscoli
- o etichette energetiche Graco 3D150
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Graco 3D150.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Graco 3D150, manuali di manutenzione, brevi manuali o manuali utente Graco 3D150. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Graco 3D150.

Manuali per l’uso simili

Manuale completo del dispositivo Graco 3D150, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Graco 3D150 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Graco 3D150.

Il manuale per l’uso completo Graco, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Graco 3D150 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Graco 3D150, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Graco 3D150 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Graco 3D150 - che ci dovrebbe aiutare nei primi passi durante l'uso Graco 3D150
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Graco 3D150
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Graco 3D150 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Graco 3D150?

Utilizza il modulo sottostante

Se non hai risolto il problema con Graco 3D150 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Graco 3D150 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)