Italiano dropdown-ico

Manuale per l’uso Buhler 45 Series

36 pagine 1.43 mb
Scarica

Vai alla pagina of 36

Summary
  • Buhler 45 Series - page 1

    45 Series Rotary Tiller TABLE OF CONTENTS DESCRIPTION PAGE Warranty ............................................................................... 1 Introduction ........................................................................ 2 Safety .................................................................................... 3 General Safety ... ...

  • Buhler 45 Series - page 2

    45 Series Rotary Tiller - 1 - WARRANTY POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material and workmanship under correct, normal agricultural use and proper ap plications. Buhler Manufacturing’s obligations under this warra ...

  • Buhler 45 Series - page 3

    45 Series Rotary Tiller - 2 - INTRODUCTION Congratulations on your choice of a Buhler Farm King 45 Series Rotary - Tiller to complement your landscaping operation. This equipment has been designed and manufactured to meet the needs of a discerning landscaping industry for the efficient tilling of soil. Safe, efficient and trouble free operation of ...

  • Buhler 45 Series - page 4

    45 Series Rotary Tiller - 3 - SAFETY YOU are responsible for the SAFE operation and maintenance of your Buhler Farm K ing 45 Series Rotary - Tiller. YOU must ensure that you and anyone else who is going to operate, maintain or work around the Rotary - Tiller be familiar with the operating and maintenance procedures and related SAFETY information co ...

  • Buhler 45 Series - page 5

    45 Series Rotary Tiller - 4 - GENERAL SAFETY 1. Have a first - aid kit available for use and know how to use it should the need arise. 2. Have a fire extinguisher available for use and know how to use it should the need arise. 3. Wear appropriate protective gear. This list includes but is not limited to: - a hard hat - Protective shoes with slip re ...

  • Buhler 45 Series - page 6

    45 Series Rotary Tiller - 5 - MAINTENANCE SAFETY 1. Follow ALL the operating, maintenance and safety information in the manual. 2. Support the machine with blocks or safety stands when working beneath it. 3. Follow good shop practices - Keep service are a clean and dry. - Be sure electrical outlets and tools are properly grounded. - Use adequate li ...

  • Buhler 45 Series - page 7

    45 Series Rotary Tiller - 6 - How to Install Safety signs: * Be sure that the installation area is clean and dry. * Decide on the exact position before you remove the backing paper. * Remove the smallest portion of the split backing paper. * Align the safety sig n over the specified area and carefully press the small portion with the exposed sticky ...

  • Buhler 45 Series - page 8

    45 Series Rotary Tiller - 7 - SAFETY SIGN LOCATIONS – co nt’d. Safety sign “A” Safety sign “B” Safety sign “C” REMEMBER - If Safety signs have been damaged, removed, become illegible or parts replaced without safety sign s, new safety signs must be applied. New safety signs are available from your authorized dealer. ...

  • Buhler 45 Series - page 9

    45 Series Rotary Tiller - 8 - OPERATION TO THE NEW OPERATOR OR OWNER The Buhler Farm King 45 Series Rotary Tiller is a machine that combines the primary and secondary tillage operat ion into one machine. It breaks up the soil and prepares the seed bed in one pass. Rotational power to the rotor is provided by the tractor PTO. Be familiar with the ma ...

  • Buhler 45 Series - page 10

    45 Series Rotary Tiller - 9 - MACHINE BREAK - IN Although there are no operational restrictions on the Tiller when used for the first time, it is recommended that the following mechanical items be checked: A. After operating for 1/2 hour or after completing 1/2 acre: 1. Check all nuts, bolts and other fasteners. Tighten to their specified torque le ...

  • Buhler 45 Series - page 11

    45 Series Rotary Tiller - 10 - EQUIPMENT MATCHING To insure the safe and reliable operation of the Tiller, it is necessary to use a tractor with the correct specifications. Use the following list as a guide in selec ting a tractor to use on the machine. 1. Horsepower: Use Table 1 as a guide in selecting the tractor horsepower appropriate for your w ...

  • Buhler 45 Series - page 12

    45 Series Rotary Tiller - 11 - DRIVELINE DIMENSION A PTO driveline is supplied with the machine. To accommodate the variety of 3 point hitch geometry available today, the driveline can be too long for some machines and must be cut. It is very important that the driveline be free to telescope but not bottom out when going through its working range. ...

  • Buhler 45 Series - page 13

    45 Series Rotary Tiller - 12 - DRIVELINE DIMENSION - CONT'D. 7. Pull the driveli ne apart and cut 1/2 of the dimension determined in step 5 from each end. Add another ½ inch (12MM) to each cut off segment. 8. Be sure to use a hacksaw to cut 1/2 from each end of the separated shaft. Cut both t he plastic tube and the metal cores. 9. Use a file ...

  • Buhler 45 Series - page 14

    45 Series Rotary Tiller - 13 - ATTACHING/UNHOOKING The Tiller should always be located on a le vel, dry area that is free of debris and other foreign objects. When attaching the machine to a tractor, follow this procedure: 1. Clear the area of bystanders, especially small children. 2. Be sure the tractor 3 point hitch is in the Category 1 con figur ...

  • Buhler 45 Series - page 15

    45 Series Rotary Tiller - 14 - FIELD OPERATION Buhler Farm King 45 Series Rotary Tillers are designed with the inherent flexibility of operating well in almost any kind of soil and terrain conditions. However, the operator has the responsibility of being familiar with all operating and safety procedu res and following them. Each operator should rev ...

  • Buhler 45 Series - page 16

    45 Series Rotary Tiller - 15 - FIELD OPERATION - cont'd. 7. Align the unit with the working area. 8. Starting machine: a. Run the engine at low idle. b. Slowly engage the PTO control to start the machine. c. Slowly bring the engine to the rated PTO speed. Never excee d rated speed. d. Lower the machine to the ground and proceed down the field. ...

  • Buhler 45 Series - page 17

    45 Series Rotary Tiller - 16 - FIELD OPERATION - cont'd. e. The rotation of the Tines propel the machine in the forward direction. Always use the tractor transmission to control the speed of forward travel. f. Always disengage the PTO control and raise the machine out of the ground before depressing the master clutch on the tractor. g. Use low ...

  • Buhler 45 Series - page 18

    45 Series Rotary Tiller - 17 - TRANSPORTING When transporting the machine, review and follow these instructions: 1. Be sure all bystanders a re clear of the machine. 2. Be sure that the machine is securely attached to the tractor and all retainer pins are installed. 3. Clean the SMV emblem, lights and reflectors and be sure they are working. 4. Be ...

  • Buhler 45 Series - page 19

    45 Series Rotary Tiller - 18 - STORAGE After the season's use, the machine should be thoroughly inspected and prepared for storage. Repair or replace any worn or damaged components to prevent any unnecessary down time at the start of next season. To insure a long, trouble free life, this procedure should be followed when preparing the unit for ...

  • Buhler 45 Series - page 20

    45 Series Rotary Tiller - 19 - SERVICE AND MAINTENANCE SERVICE Follow Maintenance Safety Instructions as outlined. FLUIDS AND LUBRICANTS 1. Hydraulic Oil: Use a standard hydraulic oil for all operating conditions. 2. Gear Box Oil : Use an SAE 85W90 gear oil for all operating conditions. Gear Box Capacity: 1 U.S. quart (0.85 liter) 3. Chain Case Gre ...

  • Buhler 45 Series - page 21

    45 Series Rotary Tiller - 20 - SERVICING INTERVALS The periods recommended below are based on normal operating conditions. Severe or unusual condition s may require more frequent lubrication or oil changes. 8 Hours or Daily; Telescoping Tubes and Quick Disconnect 20 Hours 1. Lubricate PTO driveline (7 locations). ALERT: When using the safety chains ...

  • Buhler 45 Series - page 22

    45 Series Rotary Tiller - 21 - SERVICING INTERVALS – cont’d. 40 Hours 1. Check gear box oil level. Add as required 2. Add approximately 10 squirts of grease in chain case. Annually 1. Change gear box oil. Refill with SAE 85W90 gear oil. 2. Wash machine. ...

  • Buhler 45 Series - page 23

    45 Series Rotary Tiller - 22 - MAINTENANCE By following a careful service and maintenance program for your machine, you will enjoy many years of trouble - free operation. A - FRAME ADJUSTMENT When moving the hitch along the front frame to adjust the offset, follow this procedure: 1. Clear the area of bystanders, especially small children. 2. Raise ...

  • Buhler 45 Series - page 24

    45 Series Rotary Tiller - 23 - SLIP CLUTCH During normal operation, the slip clutch can release and slip when encountering an obstruction or when overloaded. It is designed to slip when the load exceeds 3 times its nominal rating. When the clutch slips too frequently during normal operating conditions, it is necessary to replace the clutch linings. ...

  • Buhler 45 Series - page 25

    45 Series Rotary Tiller - 24 - TROUBLE SHOOTING The Buhler Farm King 45 Series Rotary Tiller moves curved Tines on a turning rotor through the ground to break it up and prepare a se ed bed. It is a simple and reliable system that requires minimal maintenance. In the following section, we have listed many of the problems, causes and solutions to the ...

  • Buhler 45 Series - page 26

    45 Series Rotary Tiller - 25 - ASSEMBLY The machine is shipped with the PTO shaft not installed. To install the PTO driveline on the machine, follow this procedure: 1. Clear the area of bystanders, especially small children. 2. Clean the splines on the yoke and the input shaft. 3. Align the splines on the yoke and the shaft . 4. Attach the drivelin ...

  • Buhler 45 Series - page 27

    45 Series Rotary Tiller - 26 - BOLT TORQUE CHECKING BOLT TORQUE The tables shown below give correct torque values for various bolts and cap screws. Tighten all bolts to the torques specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt torque chart as a guide. Replace hardware with the same strength bolt. ENGLI ...

  • Buhler 45 Series - page 28

    45 Series Rotary Tiller - 27 - 45 SERIES TILLER ...

  • Buhler 45 Series - page 29

    45 Series Rotary Tiller - 28 - ...

  • Buhler 45 Series - page 30

    45 Series Rotary Tiller - 29 - PARTS LIST WHEN ORDERING PARTS Always giv e your dealer the Model, Color and Serial Number of your machine to assist him in ordering and obtaining the correct parts. Use the exploded view and tabular listing of the area of interest to exactly identify the required part. 60'' & 72'' 45 SERIES T ...

  • Buhler 45 Series - page 31

    45 Series Rotary Tiller - 30 - 26 812364 1/2'' Lock Nut (pl) 27 967164 Pound - In Grease Fitting 28 84299 5/8'' x 2'' Hex Bolt (pl) 29 84270 5/8'' x 1 3/4'' Hex Bolt (pl) 30 812482 5 /8'' Lock Nut (pl) 31 907349 Safety Cone 32 903171 Spacer 1.05''OD x 2 1/4'' 33 906837 ...

  • Buhler 45 Series - page 32

    45 Series Rotary Tiller - 31 - 68 965911 7/16'' Linch Pin 69 967361 7/8'' x 4'' Clevis Pin (pl) 70 86171 3/8'' x 1 1/4'' Hex Bolt (pl) 71 811790 3/4'' x 4 1/2'' Hex Bolt (pl) 72 81701 3/4'' Lock Washer (pl) 73 81700 3/4'' Hex Nut (pl) 74 81593 3/8'' ...

  • Buhler 45 Series - page 33

    45 Series Rotary Tiller - 32 - 45 SERIES TILLER GEARBOX - #906913 45 SERIES TILLER GEARBOX PARTS LIST ITEM PART NO. DESCRIPTION 906913 Gearbox Complete 1 907151 Housing 2 907152 Ball Bearing 3 967303 Snap Ring 4 907153 Oil Seal 5 907154 Ring 6 967305 Snap Ring 7 907155 Roller Bearing 8 907160 Gear Set 9 907161 Hex Shaft 10 907162 Oil Seal 11 967398 ...

  • Buhler 45 Series - page 34

    45 Series Rotary Tiller - 33 - PTO - F0409 ...

  • Buhler 45 Series - page 35

    45 Series Rotary Tiller - 34 - 45 SERIES TILLER PTO PARTS LIST ITEM PART NO. DESCRIPTION F0409 Gearbox Complete (104 Series) 907193 Outer Half Shaft - Tracktor 907194 Inner Half Shaft - Implement 1 907186 Yoke - Tracktor End 2 936540 Repair Kit 3 936344 Outer Tube Yoke 4 936351 Flex Pin Outer Yoke 5 907187 Cardan Tube, Outer 6 907188 Cardan Tube, I ...

  • Buhler 45 Series - page 36

    45 Series Rotary Tiller - 35 - SHIPPING BUNDLES QUANTITY BUNDLE REQUIRED NUMBER DESCRIPTION C4560 60” Tiller c/w PTO 1 F0414 Deck Assembly C4572 72” Tiller c/w PTO 1 F0415 Deck Assembly OPTIONS F9415 Parking Jack w/Mounting Plate ...

Fabbricante Buhler Categoria Tiller

I documenti che otteniamo dal fabbricante del dispositivoBuhler 45 Series possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Buhler
- manuali per l’uso 45 Series
- schede prodotto Buhler
- opuscoli
- o etichette energetiche Buhler 45 Series
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Buhler 45 Series.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Buhler 45 Series, manuali di manutenzione, brevi manuali o manuali utente Buhler 45 Series. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Buhler 45 Series.

Manuali per l’uso simili

Manuale completo del dispositivo Buhler 45 Series, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Buhler 45 Series dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Buhler 45 Series.

Il manuale per l’uso completo Buhler, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Buhler 45 Series - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Buhler 45 Series, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Buhler 45 Series che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Buhler 45 Series - che ci dovrebbe aiutare nei primi passi durante l'uso Buhler 45 Series
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Buhler 45 Series
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Buhler 45 Series in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Buhler 45 Series?

Utilizza il modulo sottostante

Se non hai risolto il problema con Buhler 45 Series con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Buhler 45 Series è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)