-
Harbor Freight Tools 3733 - page 1
4" TILE SA W WITH WET TRA Y Model 3733 SET UP AND OPERA TING INSTRUCTIONS Please Note: Diamond Blade not included, sold separately . Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2002, 2009 by Harbor Freight T ool ...
-
Harbor Freight Tools 3733 - page 2
Page 2 SKU 3733 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product ...
-
Harbor Freight Tools 3733 - page 3
Page 3 SKU 3733 For technical questions, please call 1-800-444-3353. plugs with grounded power tools. Unmodied plugs and matching out - lets will reduce risk of electric shock. A void body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. D ...
-
Harbor Freight Tools 3733 - page 4
Page 4 SKU 3733 For technical questions, please call 1-800-444-3353. do the job better and safer at the rate for which it was designed. Do not use the power tool if the b. switch does not turn it on and off. Any power tool that cannot be con- trolled with the switch is dangerous and must be repaired. Disconnect the plug from the c. power source and ...
-
Harbor Freight Tools 3733 - page 5
Page 5 SKU 3733 For technical questions, please call 1-800-444-3353. Use tools with the lowest vibration 4. when there is a choice between dif- ferent processes. Include vibration-free periods each 5. day of work. Grip tool as lightly as possible (while 6. still keeping safe control of it). Let the tool do the work. T o reduce vibration, maintain t ...
-
Harbor Freight Tools 3733 - page 6
Page 6 SKU 3733 For technical questions, please call 1-800-444-3353. PO WER CORD 120 V OL T , GROUNDED ELECTRICAL OUTLET TILE SA W DRIP LOOP Figure 1 13. Always arrange a “drip loop” in the Power Cord (1 1) connecting the Tile Saw to a 120 volt, grounded, electrical outlet. A drip loop is that part of the Power Cord below the level of the outle ...
-
Harbor Freight Tools 3733 - page 7
Page 7 SKU 3733 For technical questions, please call 1-800-444-3353. Never attempt to remove material 26. stuck in the moving parts of the Tile Saw while it is plugged in and running. When cutting a large work piece 27. make sure its entire length is prop- erly supported. If necessary , use a roller stand (not included) with larger work pieces. Nev ...
-
Harbor Freight Tools 3733 - page 8
Page 8 SKU 3733 For technical questions, please call 1-800-444-3353. situations that may occur . It must be understood by the operator that common sense and caution are fac- tors which cannot be built into this product, but must be supplied by the operator . Abrasive Cutting-Off Operation Safety W arnings This power tool is intended to 1. function ...
-
Harbor Freight Tools 3733 - page 9
Page 9 SKU 3733 For technical questions, please call 1-800-444-3353. Fragments of workpiece or of a broken accessory may y away and cause injury beyond immediate area of operation. Position the cord clear of the spin- 1 1. ning blade. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accesso ...
-
Harbor Freight Tools 3733 - page 10
Page 10 SKU 3733 For technical questions, please call 1-800-444-3353. GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding pro ...
-
Harbor Freight Tools 3733 - page 11
Page 1 1 SKU 3733 For technical questions, please call 1-800-444-3353. Double insulated tools may be used 2. in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Extension Cords Grounded 1. tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension ...
-
Harbor Freight Tools 3733 - page 12
Page 12 SKU 3733 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Blade Diameter (Blade Not Included, Sold Separately) 4" (671 13 4” Continuous Rim Diamond Blade Recommended) Arbor Diameter 5/8" Maximum Cutting Capacity 1-1/16” Electrical Requirements 120 V~ / 60 Hz T ilting Head 22.5° to 45° Bevel Blade Rated Sp ...
-
Harbor Freight Tools 3733 - page 13
Page 13 SKU 3733 For technical questions, please call 1-800-444-3353. Blade Guard (8) T able (1) Lever (9) Power Switch (4) Angle Gauge (21) Body (19) Rip Fence (7) FIGURE 2 Bench Stop (22) Outer Flange (36) 4” Blade (Not Included) Nut (37) Outer Flange (36) Remove Screw (16) to Remove T able (1) FIGURE 3 Arrow Points T o FRONT of T ile Saw Nut ( ...
-
Harbor Freight Tools 3733 - page 14
Page 14 SKU 3733 For technical questions, please call 1-800-444-3353. T able (adjacent to Blade slot) and tighten. Reinstall the T able and secure it in 7. place with the Screw (16). OPERA TING INSTRUCTIONS Read the ENTIRE IMPORT ANT SAFETY INFORMA TION section at the beginning of this manual including all text under subheadings therein before set ...
-
Harbor Freight Tools 3733 - page 15
Page 15 SKU 3733 For technical questions, please call 1-800-444-3353. Route the power cord along a safe 2. route to reach the work area with- out creating a tripping hazard or exposing the power cord to pos- sible damage. The power cord must reach the work area with enough extra length to allow free movement while working. Secure loose work pieces ...
-
Harbor Freight Tools 3733 - page 16
Page 16 SKU 3733 For technical questions, please call 1-800-444-3353. Fill the Body with water . 2. CAUTION: Make sure the water level is high enough to cover the lower edge of the Blade but not above the maxi- mum water level as indicated by the arrow . NOTE: 3. The T able may be tilted to make 22.5 Degree or a 45 Degree beveled cuts. T o do so, e ...
-
Harbor Freight Tools 3733 - page 17
Page 17 SKU 3733 For technical questions, please call 1-800-444-3353. Cleaning, Maintenance, and Lubrication BEFORE EACH USE, 1. inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, loose or worn out blade, and any other condition that may aff ...
-
Harbor Freight Tools 3733 - page 18
Page 18 SKU 3733 For technical questions, please call 1-800-444-3353. P ARTS LIST Part Description Qty . Part Description Qty . 1 T able 1 21 Angle Gauge 1 2 Handle 1 22 Bench Stop 2 3 Handle Base 2 23 Motor Holder (T op) 1 4 Power Switch 1 24 Guard Stand 1 5 Wire 4 25 Screw (M4 x 7 x 16 mm) 2 6 Screw (M3 x 15) 4 26 Motor Holder (Bottom) 1 7 Rip Fe ...
-
Harbor Freight Tools 3733 - page 19
Page 19 SKU 3733 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts . 7 36 37 38 ...
-
Harbor Freight Tools 3733 - page 20
Page 20 SKU 3733 For technical questions, please call 1-800-444-3353. LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days fr ...
Hai una domanda su Harbor Freight Tools 3733?
Utilizza il modulo sottostante
Se non hai risolto il problema con Harbor Freight Tools 3733 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Harbor Freight Tools 3733 è probabile che voglia condividere il modo di risolverlo.