-
JVC GY-HM200E - page 1
. 4K MEMORY CARD CAMERA RECORDER GY-HM200U/GY-HM200E GY-HM170U/GY-HM170E I N S T R U C T I O N S . The illustration here shows how the handle unit is attached using the unit supplied with GY-HM200U/GY-HM200E. GY-HM170U/GY-HM170E do not come with a handle unit. The specifications and appearance of this product are subject to changes for further impr ...
-
JVC GY-HM200E - page 2
2 ...
-
JVC GY-HM200E - page 3
. 1. Read these instructions . 2. K eep these instructions. IMPOR T ANT SAFE GU ARDS 4. F ollow all instructions. 5. Do not use this apparatus near w ater . 6. Clean only with dry cloth. 7. Do not block any v entilation openings. Install in accordance with the manufactur er’ s instructions. 8. Do not install near any heat sour ces such as radiato ...
-
JVC GY-HM200E - page 4
Safety Precautions . CA UTION FOR USA AND CANAD A CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK. DO NO T REMO VE COVER (OR BA CK). NO USER-SER VICEABLE P AR TS INSIDE. REFER SERVICING T O QU ALIFIED SER VICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to aler t the user to the presence of unins ...
-
JVC GY-HM200E - page 5
. POUR CANAD A RISQUE D’ELECTROCUTION NE P AS OUVRIR CA UTION: The mains plug shall remain readily operab le. Remov e the mains plug immediately if the camera functions abnormally . W ARNING: The batter y pac k, the camera with batter y installed, and the remote control with batter y installed should not be e xposed to e xcessive heat such as ...
-
JVC GY-HM200E - page 6
. When the equipment is installed in a cabinet or on a shelf , make sure that it has sufficient space on all sides to allow f or ventilation (10 cm (3-15/16 " ) or more on both sides, on top and at the rear). Do not bloc k the v entilation holes. (If the ventilation holes are b loc ked b y a newspaper , or cloth etc. the heat ma y not be able ...
-
JVC GY-HM200E - page 7
. IMPORT ANT (for owner s in the U .K.) Connection to the mains supply in the United Kingdom. DO NO T cut off the mains plug fr om this equipment. If the plug fitted is not suitable f or the power points in y our home or the cab le is too shor t to reach a po wer point, then obtain an appropriate safety appro ved e xtension lead or contact the loca ...
-
JVC GY-HM200E - page 8
. W ARNING This is a Class A product. In a domestic envir onment this product ma y cause radio interference in which case the user may be r equired to tak e adequate measures. CA UTION: T o avoid electric shock or damage to the unit, first firmly insert the small end of the pow er cord into the A C Adapter until it is no longer wobbly , and then pl ...
-
JVC GY-HM200E - page 9
. Battery Pac k The supplied batter y pac k is a lithium-ion batter y . Bef ore using the supplied battery pack or an optional battery pack, be sure to read the f ollowing cautions: T o av oid hazards ... do not bur n. T o prevent dama ge and prolong service life ... do not subject to unnecessary shock. ... charge within the temperature r a ...
-
JVC GY-HM200E - page 10
Contents Introduction Safety Precautions ............................................ 4 Contents .......................................................... 10 Main Features ................................................. 12 Precautions for Proper Use ............................. 14 Operation Modes ............................................. 18 ...
-
JVC GY-HM200E - page 11
Text Input with Software Keyboard .............. 94 Menu Screen Hierarchical Chart ..................... 95 Camera Function Menu ................................... 96 User Switch Set Item .................................... 98 Camera Process Menu .................................. 100 Detail/Adjust Item ....................................... 102 ...
-
JVC GY-HM200E - page 12
Main Features Supports 4K high-definition recording, realizing more advanced Full HD recording quality Recording and playback at 30p/25p/24p are possible in 4K resolution (3840x2160 pixels), which contains information that is about four times larger than Full HD. And with the H.264 codec, this camera recorder supports high resolution 4K recording a ...
-
JVC GY-HM200E - page 13
3.5-inch 920K-pixel LCD display, 0.24- inch 1.56-megapixel color viewfinder The 3.5-inch 16:9 LCD display and 0.24-inch 16:9 LCOS color viewfinder provides support for critical focusing during 4K shooting. Other assist functions are also available, including magnified focus on a manually selected point. Auto focus/Optical image stabilizer The camer ...
-
JVC GY-HM200E - page 14
Precautions for Proper Use Storage and Usage Locations o Allowable ambient temperature and humidity Be sure to use this unit within the allowable temperature range of 0 °C to 40 °C (32 °F to 104°F) and a relative humidity of 30 % to 80 %. Using this unit at a temperature or humidity outside the allowable ranges could result not only in malfunct ...
-
JVC GY-HM200E - page 15
Regular Inspection (Maintenance) o Under normal environment, dust will accumulate on the camera recorder when it is used over a long period. Dust may enter the camera recorder especially if it is used outdoors. This may affect the image and sound quality of the camera recorder. Check and replace the fan after every 9000 hours (suggested guideline). ...
-
JVC GY-HM200E - page 16
Others o Do not insert objects other than the memory card into the card slot. o Do not block the vent on the unit. Blocking of the vent causes internal heating and may lead to burns and fires. 0 Do not turn off the [POWER ON/OFF] switch or remove the power cable during recording or playback. 0 The camera recorder may not show stable pictures for a ...
-
JVC GY-HM200E - page 17
Copyright o Any recordings made on this camera recorder that are played back for profit or public preview may infringe on the rights of the owner of the recordings. Do not use the recordings for purpose other than personal enjoyment without prior consent from the owner. License Notices o MPEG LA AVC THIS PRODUCT IS LICENSED UNDER THE AVC PATENT POR ...
-
JVC GY-HM200E - page 18
Operation Modes This camera recorder has four operation modes - Camera mode, Media mode, USB mode and Remote Edit mode. . MODE Set Button ( R ) Set Button ( R ) T rimming Pla yback Normal Playback [CANCEL/S T OP]/[MENU/THUMB] Button FTP in Progress FTP in Progress Exit FTP Operation (Successful) Camera Input * * Selecting a mode other than the Meta ...
-
JVC GY-HM200E - page 19
Operation Mode Description Camera Mode 0 This is the camera shooting mode. The camera recorder starts up in Camera mode when the power is turned on. 0 Camera images are output on the viewfinder and LCD monitor. When a recordable SD card is inserted, the camera recorder enters the recording standby mode. “STBY” appears on the operation mode disp ...
-
JVC GY-HM200E - page 20
Names of Parts . A F B D E C A Built-in Microphone ( A P 65 [Audio Recording] ) B Handle Unit K ( A P24 [Handle Unit K ] ) * GY-HM170U/GY-HM170E does not come with the handle unit. For details on purchasing the handle unit, please contact the local dealers in your area. Memo : 0 The handle unit is detached from the camera recorder unit in the facto ...
-
JVC GY-HM200E - page 21
Side Control Panel . B F G D C M J I H L K E A A [FULL AUTO] Full Auto Selection Button Press and hold the button to switch the Full Auto mode ON and OFF. Full Auto mode adjusts the Iris, Gain, Shutter and White Balance automatically. ( A P54 [Adjusting the Brightness Automatically: Automatic Brightness Adjustment (AE) Mode] ) ( A P55 [Auto Iris (A ...
-
JVC GY-HM200E - page 22
Side Terminal Section . A D C B A [HOST] USB Host Terminal K For connecting an USB adapter according to the intended purpose when you are connecting the unit to a network. ( A P143 [Camera Setup for Network Connection] ) B [DEVICE] USB Mini Terminal ( A P140 [Loading Clips to the PC] ) C [HDMI] HDMI Output Terminal ( A P138 [Connecting External Mon ...
-
JVC GY-HM200E - page 23
LCD Monitor . G F E H I J D B A C L K M A LCD Monitor ( A P 37 [Adjusting the LCD Monitor and Viewfinder] ) B [CANCEL/STOP] Cancel Button Cancels various settings and stops playback. C LCD Cross-Shaped Button ( JKHI )/Set Button ( R ) 0 The function changes according to the operation status of the camera recorder. 0 During menu operation (all modes ...
-
JVC GY-HM200E - page 24
Handle Unit K . D C F A B E K H I G R S P Q J N O M L A Microphone Holder ( A P 27 [Attaching the External Microphone O ] ) B Microphone Holder Lock Knob ( A P27 [Attaching the External Microphone O ] ) C Handle Tally Lamp ( A P39 [Tally Lamp] ) ( A P174 [Blinking of the Tally Lamp] ) D Accessory Mounting Screw Hole E Shoe For mounting separately s ...
-
JVC GY-HM200E - page 25
Lens Section . A C D B A Filter Built-In Screw 0 Transparent or UV filter for lens protection, or filters for various effects can be installed. 0 Installable filter types: Φ62 mm P0.75 Memo : 0 Remove the lens hood when installing the filter. ( A P28 [Attaching/Detaching the Hood] ) B Focus Ring ( A P50 [Focus Operation] ) C Zoom Ring ( A P49 [Zoo ...
-
JVC GY-HM200E - page 26
Basic System Diagram . Wireless Microphone Receiver RCA pin AV C a b l e HDMI Cable [AU X] [INPUT1/INPUT2] [SDI OUT] [HDMI] [A V] [REMOTE] [DEVICE] [DC] [ x ] K : Carr ying Case Tr i p o d SDHC/SDX C Memory Card SDHC/SDX C Card Read er USB Cable Battery Standard P ackage AC A dapter Handle Unit Remote Control Unit Non-linear Editing System G Y -HM2 ...
-
JVC GY-HM200E - page 27
Settings and Adjustments Before Use . Attaching the Handle Unit K The handle unit is detached from the camera recorder unit in the factory shipment. * GY-HM170U/GY-HM170E does not come with the handle unit. For details on purchasing the handle unit, please contact the local dealers in your area. To use the handle unit, attach it by following the st ...
-
JVC GY-HM200E - page 28
Attaching/Detaching the Lens Cap 0 Before shooting, detach the lens cap. 0 When this camera recorder is not in use, attach the lens cap to protect the lens. 0 Pinch the tabs on both sides of the lens cap to attach and detach the lens cap. . Caution : 0 Do not press against the lens cap with force. Doing so may damage the lens or the cap. Attaching/ ...
-
JVC GY-HM200E - page 29
Attaching the Tripod Use the screw hole at the bottom of this camera recorder. (3/8×16UNC, 1/4×20UNC) Use the screw hole that suits the tripod. To prevent the camera recorder from falling off, which may result in injuries or damages, read the instruction manual of the tripod to be used and make sure that it is securely attached. . o Bottom Cautio ...
-
JVC GY-HM200E - page 30
Removing the Battery . 2 G Y -HM200U/G Y -HM200E G Y -HM170U/G Y -HM170E 1 2 1 Hold down the lock button (blue) at the center of the [POWER ON/OFF] switch to set to “OFF”. 2 While pressing and holding the [BATT. RELEASE ] button, push up and remove the battery in the direction of the arrow. Caution : 0 Do not remove the battery when the [POWER ...
-
JVC GY-HM200E - page 31
Using AC Power (DC IN Power) Use the supplied AC adapter to operate the camera recorder with AC power. . 1 2 1 Connect the DC cable of the AC adapter to the [DC] terminal of the camera recorder. 0 Check that the power switch of the camera recorder is set to “OFF ”. 0 Open the cover of the [DC] terminal and connect as shown in the diagram. 2 Hol ...
-
JVC GY-HM200E - page 32
Menu Screen ( A P 93 [Display and Description of the Menu Screen] ) . Display Settings Warnings by Lamp and Warning Tone Warning status is indicated by tally lamp and warning tone. 0 The tally lamp blinks. 0 Setting [Main Menu] B [A/V Set] B [Audio Set] B [Alarm Level] to “High” or “Low” sounds the warning tone. The warning tone is output f ...
-
JVC GY-HM200E - page 33
Initial Settings When the power is first turned on, the Initial Setting screen for performing the initial settings in the camera recorder appears. Set the date/time of the built-in clock in the [Initial Setting] screen. All operations are disabled until initial settings are complete. . Memo : 0 It is recommended to use the AC adapter as the power s ...
-
JVC GY-HM200E - page 34
4 Press the Set button ( R ) after confirming the exit screen. The [Initial Setting] screen appears. 0 For U models . Set UTC-05:00 Initial Setting 0 For E models . Set UTC Initial Setting Memo : 0 The [Initial Setting] screen appears when the power is turned on for the first time and when the power is turned on after the built-in battery is fully ...
-
JVC GY-HM200E - page 35
Displays on the LCD Monitor and Viewfinder You can display the camera status, media information, zebra pattern, and various markers in the video image on the LCD monitor and viewfinder screen during shooting. Memo : 0 When [Main Menu] B [A/V Set ] B [Video Set ] B [Display On TV] is set to “On”, the display screen and menu screen are also displ ...
-
JVC GY-HM200E - page 36
Status Screen 0 This screen allows you to check the current settings. 0 To display the status screen, press the [STATUS ] button in the normal screen. 0 The status display differs according to the operation mode (two types). ( A P18 [Operation Modes] ) 0 Press the [STATUS] button to switch to the display screen. 0 Press the [MENU] button at each st ...
-
JVC GY-HM200E - page 37
Adjusting the LCD Monitor and Viewfinder You can monitor video images on this camera recorder using the viewfinder, LCD monitor, or both. . Normal LCD Inv erted LCD Displays on the LCD Monitor and Viewfinder Screen (VF) [VF SW] Item State of Viewfinder LCD Screen Viewfinder Screen LCD Monitor Open LCD Monitor Open LCD Monitor Closed Enable Pulled o ...
-
JVC GY-HM200E - page 38
Adjusting the Viewfinder You can change the brightness and peaking of the viewfinder screen according to your usage conditions. Changing the brightness of the screen will not affect the recorded images. . 2 1 3 Caution : 0 A high-definition viewfinder is used on this camera recorder in order to provide an accurate focusing environment. Due to the c ...
-
JVC GY-HM200E - page 39
Assignment of Functions to User Buttons You can assign functions to the following buttons and use them as user buttons. By assigning functions to the buttons, the usability of the camera recorder can be enhanced. Perform settings in the menu items corresponding to each button. Button Menu Item [F.ASSIST/1] Button [USER1] [TC/2] Button [USER2] [LOLU ...
-
JVC GY-HM200E - page 40
SD Card This camera recorder saves the recorded images and audio sound on the SD card (sold separately) in the card slot. Usable Cards Format Setting and Usable SD Card Combinations System Format Bit Rate Usable SD Card 4K - - UHS-I U3 or higher HD QuickTime 50M (YUV422), 50M (XHQ) Class 10 or higher 35M (UHQ) Class 6 or higher AVCHD - Class 4 or h ...
-
JVC GY-HM200E - page 41
Inserting an SD Card This camera recorder comes with two card slots (Slot A and B) for video/audio recording and playback. . 1 3 SD Card Cover 2 SD Card 1 Open the SD card cover by sliding the cover in the direction indicated by the arrow. 2 Insert an SD card with the notched corner pointing up. The status indicator of the card slot to which the ca ...
-
JVC GY-HM200E - page 42
Switching the SD cards When both card slots are inserted with SD cards, you can use the [SLOT SEL] button to switch the card to use. When the memory on an SD card is full during recording, data recording automatically switches to the other card. . Memo : 0 The [SLOT SEL] button is disabled during recording or playback. Cards will not be switched ev ...
-
JVC GY-HM200E - page 43
6 Formatting is complete. When formatting is complete, “ Complete” appears and the camera recorder returns to the [Format Media] screen. Memo : 0 During formatting, menu operation is unavailable but you can start recording. However, this is only available when a recordable SD card is inserted in the other slot. 0 Formatting cannot be performed ...
-
JVC GY-HM200E - page 44
Clips Recorded to SD Cards Folders in the SD Card The captured image is recorded into different folders according to the [System] and [ W Format]/ [ Y Format] settings. System W Format/ Y Format Record Folder 4K/HD/SD/ Web QuickTime DCIM HD/SD/ Web AVCHD PRIVATE/AVCHD Memo : 0 By formatting (initializing) the SD card from the [Format Media] menu on ...
-
JVC GY-HM200E - page 45
Operation Lock Feature You can use this feature to prevent erroneous camera operation. . 1 While in the Camera mode (when the display screen appears), press and hold the [CANCEL] button for 5 seconds or longer. 0 The operation lock turns on, and an operation lock icon ( r ) appears on the display screen. . 1/ 1 0 0 F1 . 6 18 dB AE + 6 ND 1 / 1 6 12 ...
-
JVC GY-HM200E - page 46
Basic Shooting Procedures Preparations . 1 3 4 4 2 1 Supply battery or AC adapter power to the camera recorder. ( A P 29 [Power Supply] ) 2 Insert an SD card. ( A P 40 [SD Card] ) 3 Turn on the power of the camera recorder. Hold down the lock button (blue) at the center of the [POWER ON/OFF] switch to set to “ON”. The camera recorder starts up ...
-
JVC GY-HM200E - page 47
1 Press the [REC ] button to start recording to the SD card. This camera recorder has two [REC] buttons. Any of the [REC ] buttons can be used to start/ stop recording by default. The tally lamp lights up in red during recording. 0 Zoom Operation ( A P49 [Zoom Operation] ) 0 Adjusting the Focus ( A P50 [Focus Operation] ) Memo : 0 If both the slots ...
-
JVC GY-HM200E - page 48
Selecting a File Format Select a file format in [ W Format]/[ Y Format]. There are two file formats for selection. 0 AVCHD: AVCHD file format 0 QuickTime: QuickTime file format (.MOV) Memo : 0 When [System] is set to “4K”, this item is fixed at “QuickTime”. Selecting a Video Format 0 Select a [Record Format] from the list of formats. The se ...
-
JVC GY-HM200E - page 49
o When [System] is set to “HD+Web”, the options for slot B are: Record Format Y Format Y Resolution Y Frame Rate Y Bit Rate QuickTime 960 x 540 30p 25p 24p 3M (HQ) 720 x 480 60i 8M 720 x 576 50i 480x270 30p 25p 24p 1.2M (LP) AVCHD 1440 x 1080 60i 50i 9M (LP) 5M (EP) 720 x 480 60i 8M 720 x 576 50i Memo : 0 The available options for [ Y Resolutio ...
-
JVC GY-HM200E - page 50
0 Set the zoom speed for “L”, “M” and “H” of the [ZOOM L/M/H] zoom speed switch individually. Increasing the value increases the zoom speed. ( A P97 [Handle Zoom Speed L/Handle Zoom Speed M/Handle Zoom Speed H O ] ) Memo : 0 The zoom lever on the handle is disabled when “Off ” is selected. 2 Set the [ZOOM L/M/H] zoom speed switch to ...
-
JVC GY-HM200E - page 51
Setting to Auto Focus Temporarily (Push Auto Focus) 0 If [Push AF/AF Lock ] is assigned to the user button, the camera recorder will shift to Auto Focus mode temporarily and automatically adjusts focus when the assigned user button is held down during shooting in Manual Focus mode. 0 Release the user button assigned with [Push AF/ AF Lock] to retur ...
-
JVC GY-HM200E - page 52
Focus Assist Function 0 When the [F.ASSIST/1] button is pressed during shooting, the focused area is displayed in color. This enables easy and accurate focusing. 0 Select the color (blue, red or green) in the menu. Memo : 0 When [Main Menu] B [LCD/VF ] B [Shooting Assist] B [Focus Assist] B [Type] is set to “ACCU-Focus”, the depth of field beco ...
-
JVC GY-HM200E - page 53
Adjusting the Focusing by Face Detection This function detects human faces and automatically adjusts focus during Auto Focus. It can also track moving objects. When several faces are detected, you can select one to focus on. Memo : 0 This function can also adjust the brightness automatically according to the brightness of the face detected. ( A P98 ...
-
JVC GY-HM200E - page 54
Selecting Specific Person from Several Persons 1 Hold down the user button that is assigned with “Face Detect”. 0 The camera recorder will enter face selection mode and the face detection icon ( q ) will blink. 0 An orange frame will appear on the face of the person nearest to the center of the screen. Blue frames will appear on the faces of ot ...
-
JVC GY-HM200E - page 55
Memo : 0 Pressing and holding the [FULL AUTO] button to enter the Full Auto mode also activates the automatic brightness adjustment (AE) mode. In this case, the White Balance also enters into Auto mode forcibly. 0 Pressing and holding the [AE LEVEL] button clears the value specified and fixes at “AE±0” (recommended value). 0 The convergence sp ...
-
JVC GY-HM200E - page 56
Manual Iris (Manual Adjustment) Mode The aperture value (F-number) of the lens can be set manually. 1 Press and hold the [FULL AUTO] button to set Full Auto mode to off. 2 Press the [IRIS A/M] button to set to the Manual Iris mode. The lens aperture value (F-number) is displayed. . 1/ 1 0 0 F1 . 6 18 dB AE + 6 ND 1 / 1 6 12 : 34 : 56 Jan 24 , 2015 ...
-
JVC GY-HM200E - page 57
Setting the Gain This function electrically boosts the light sensitivity when there is insufficient illumination on the object. You can set the gain of the video amplifier according to the brightness of the object. Select the setting mode according to your shooting conditions. . Automatic Gain Mode (Automatic Gain Adjustment) 1 Press and hold the [ ...
-
JVC GY-HM200E - page 58
Setting the Electronic Shutter You can change the shutter speed (time for each shooting frame) using the electronic shutter function. Electronic shutter can be adjusted manually or automatically. Automatic Shutter Mode (Automatic Shutter Adjustment) . 1 Press and hold the [FULL AUTO] button to set Full Auto mode to off. 2 Press and hold the [SHUTTE ...
-
JVC GY-HM200E - page 59
. 60p 60i 30p 50p 50i 25p 24p J ^ 1/10000 1/4000 1/2000 1/1000 1/500 1/500 1/250 1/120 1/120 1/100 1/100 1/50 1/50 1/48 1/24 1/12 K 1/6 1/25 1/12.5 1/6.25 1/60 1/30 1/15 1/7.5 J ~ 1/48.00 1/50.00 1/60.00 ~ K 1/30.00 1/25.00 1/24.00 1/9934 1/9863 1/10014 1/60 1/10000 1/250 1/1000 1/2000 1/4000 ^ 1/500 1/100 1/10000 1/250 1/120 1/1000 1/2000 1/4000 ( ...
-
JVC GY-HM200E - page 60
ND Filter Warning Display In order to adjust the amount of light when you are shooting at a relatively bright location, the diameter of the iris may become extremely small, causing blurry effects to occur as a result. This phenomenon is known as “small aperture diffraction”. You can make appropriate use of ND filters to prevent it from occurrin ...
-
JVC GY-HM200E - page 61
Memo : 0 Pressing and holding the [FULL AUTO] button to enter the Full Auto mode also activates the Automatic Shutter mode. In this case, the Iris, Gain and Shutter also enter into Auto mode forcibly. 0 Switching of the white balance with the [WHT.BAL B/A/PRST ] switch is disabled in the Full Auto mode. 0 When [ Main Menu] B [Camera Function] B [Us ...
-
JVC GY-HM200E - page 62
Setting the [Preset Temp.] or [Alternative Temp.] Values You can change both the color temperature settings in the Preset mode in the menu. 1 Open the [Preset Temp.] or [Alternative Temp.] menu. 0 Select [Main Menu] B [Camera Process] B [White Balance] B [Preset Temp.] and [Alternative Temp.], and press the Set button ( R ). 0 The Color Temperature ...
-
JVC GY-HM200E - page 63
. 1/ 1 0 0 F1 . 6 18 dB AE + 6 ND 1 / 1 6 12 : 34 : 56 Jan 24, 201 5 00: 00 : 00 .00 4030 20 10 0 5 . 6 f t 1/ 1 0 0 F1 . 6 18 dB AE + 6 ND 1 / 1 6 12 : 34 : 56 Jan 24 , 2015 00: 00 : 00 .00 4030 20 10 0 5 . 6 f t P 15000K 100min 50min 282m in A 3840x2160 30 p 150M 100min 50min 282m in 3840x2160 30p 150M Result Displa y [A WB] Activ ati ...
-
JVC GY-HM200E - page 64
Adjusting the Camera Image The picture quality of the camera can be set using the [Camera Process ] menu. As the adjustments are shown on the screen, you can adjust the values while checking the picture quality on the camera. 0 [ Detail] 0 [Master Black] 0 [Black Toe ] 0 [Knee] 0 [White Clip ] 0 [Gamma ] 0 [WDR] 0 [White Balance ] 0 [Color Matrix ] ...
-
JVC GY-HM200E - page 65
Audio Recording You can record audio from the two channels (CH1/ CH2) in synchronization with video images on this camera recorder. Select from the four options below to record the audio. 0 Built-in Microphone 0 Microphone connected to [AUX] terminal 0 Microphone connected to [INPUT1] terminal O 0 Microphone connected to [INPUT2] terminal O . Selec ...
-
JVC GY-HM200E - page 66
Adjusting the Audio Recording Level O You can select to adjust the audio recording levels for the two channels (CH1/CH2) manually or automatically. . Manual Adjustment Mode (Manual Adjustment) 0 Set the [CH1/CH2 AUTO/MANUAL] switch on the camera recorder to “MANUAL” to enter the manual adjustment mode, and use the [CH1]/ [CH2] recording level a ...
-
JVC GY-HM200E - page 67
Memo : 0 When [Main Menu] B [A/V Set ] B [Audio Set ] B [Limiter] is set to “Off” while in the automatic adjustment mode, the limiter operates at -6 dBFS. 0 When [A/V Set] B [Audio Set] B [Audio On FULL AUTO] is set to “SW Set”, you can switch the audio recording mode with the [CH1/CH2 AUTO/MANUAL] selection switch on the camera recorder ev ...
-
JVC GY-HM200E - page 68
Time Code and User’s Bit Time code and user’s bit data are recorded with the video in this camera recorder. The time code and user’s bit are displayed on the viewfinder and LCD monitor during playback or recording. (Display screen) Displaying Time Code and User’s Bit The time code and user’s bit are displayed on the viewfinder and LCD mon ...
-
JVC GY-HM200E - page 69
Setting Time Code Generator Presetting the Time Code Time code and user’s bit data generated from the internal time code generator are recorded. This section describes how to set [TC/UB] B [TC Preset]. ( A P103 [ TC Preset ] ) Memo : 0 When [Main Menu ] B [System] B [Record Set] B [Record Format] B [ W Frame Rate] is set to “50p”, “50i” o ...
-
JVC GY-HM200E - page 70
1 Select [Main Menu] B [ TC/UB] B [TC Preset] and press the Set button ( R ). ( A P 103 [ TC Preset ] ) The [TC Preset] screen appears. . 1 T C Preset 00:00:00:00 TC / U B Memo : 0 When [TC/UB] B [TC Generator] is set to “Regen”, the parameter is displayed as “Regen” and cannot be selected. ( A P 103 [ TC Generator ] ) 2 Set the time code ( ...
-
JVC GY-HM200E - page 71
4 Check the values and press the Set button ( R ). 0 The time code is set and the screen returns to the normal screen. 0 To cancel the setting, press the [CANCEL] button. Caution : 0 When the camera recorder is switched to Media mode during editing, editing will be canceled and the screen will close. 0 When editing the time code, operation of the b ...
-
JVC GY-HM200E - page 72
1 Set [Main Menu] B [ TC/UB] B [UB Mode] to “Preset”, and press the Set button ( R ). ( A P 103 [ UB Mode ] ) The [UB Mode] setting screen appears. . 2 TC/ U B UB Mode Preset Memo : 0 When [TC/UB] B [TC Generator] is set to “Regen”, the parameter is displayed as “Regen” and cannot be selected. ( A P 103 [ TC Generator ] ) 2 Select [Main ...
-
JVC GY-HM200E - page 73
Viewing Recorded Videos Immediately (Clip Review) You can check (review) the last recorded video clip on the screen. However, the video clip cannot be played back if the settings of the camera recorder are different from the video format (Resolution/Frame Rate/Bit Rate/SD Aspect) of the clip. ( A P115 [ W Resolution ] ) ( A P115 [ W Frame Rate ] ) ...
-
JVC GY-HM200E - page 74
Recording Simultaneously at Two Different Definitions By setting [System ] to “HD+Web”, you can record simultaneously at two different definitions. 0 When HD+Web is selected: Records a high-definition (HD) file to slot A and a web file to slot B at the same time. Web files can be used as a proxy file for the HD file. Memo : 0 If a recordable SD ...
-
JVC GY-HM200E - page 75
2 Start recording. 0 Insert recordable media in both slots, and press the [REC] button. 0 In the Dual Rec mode, recording to the media in both slots starts at the same time. 0 Both the card slot marks turn red, and the status indicators of both the card slots also light up in red. . 1/ 1 0 0 F1 . 6 18 dB AE + 6 ND 1 / 1 6 12 : 34 : 56 Jan 24, 201 5 ...
-
JVC GY-HM200E - page 76
Backup Rec 0 The Backup Rec mode allows you to make use of the media in slot B for backup recording by controlling the starting and stopping of recording in slot B without using the [REC] button. 0 Start or stop the recording using [Main Menu ] B [System] B [Record Set] B [Slot Mode] B [Backup Rec] or press the user button that is assigned with “ ...
-
JVC GY-HM200E - page 77
3 Start normal recording (normal recording into slot A) 0 Press any of the [REC] buttons. 0 Recording into the media in slot A starts. (The characters “ R REC” appear in red.) 0 The card icon of slot A turns red (unselected state), and the status indicator of slot A blinks in red. . 1/ 1 0 0 F1 . 6 18 dB AE + 6 ND 1 / 1 6 12 : 34 : 56 J a n 2 4 ...
-
JVC GY-HM200E - page 78
Special Recording Besides the normal recording mode, four special recording methods are available in this camera recorder. They are Pre Rec, Clip Continuous, Frame Rec and Interval Rec. Select a mode from [Main Menu] B [System] B [Record Set] B [Rec Mode]. ( A P116 [ Rec Mode ] ) Memo : 0 When [Main Menu] B [System] B [Record Set] B [Record Format] ...
-
JVC GY-HM200E - page 79
Clip Continuous Rec 0 In normal recording, when the recording stops, the image, audio, and accompanying data from the start till the end of the recording are recorded as one “clip” on the SD card. 0 This mode allows you to consolidate several rounds of “startstop recording” into one clip. Example: In normal recording, three clips are genera ...
-
JVC GY-HM200E - page 80
Memo : 0 Clip Continuous Rec cannot be used in the following cases. 0 When [Main Menu ] B [System] B [Record Set] B [System] is set to “HD” or “SD”, and [Format] is set to “AVCHD” 0 When [ Main Menu] B [System] B [Record Set] B [System] is set to “HD+Web” 0 The following operations cannot be performed while recording is paused (STBY ...
-
JVC GY-HM200E - page 81
2 Set the number of frames to record in [Rec Frames ]. 0 Set using [Main Menu] B [System] B [Record Set] B [Rec Mode] B [Rec Frames]. ( A P116 [ Rec Frames ] ) 3 Start recording. 0 Press the [REC] button to record only the number of frames specified in [Rec Frames] and pause. 0 The display changes (“STBY M ” B “ R REC M ” B “STBY M ” (y ...
-
JVC GY-HM200E - page 82
3 Set the time interval to start recording in [Interval Rec]. Set using [Main Menu] B [System ] B [Record Set] B [Rec Mode] B [Rec Interval]. ( A P116 [ Rec Interval ] ) 4 Start recording. 0 Press the [REC] button to record only the number of frames specified in [Rec Frames] and pause. 0 After the specified time in [Rec Interval] has passed, record ...
-
JVC GY-HM200E - page 83
Playing Recorded Clips To play back clips recorded on SD cards, switch to the Media mode. Press and hold the [MODE] selection button in Camera mode to enter Media mode. A thumbnail screen of the clips recorded on the SD card is displayed. You can play back the selected clip on the thumbnail screen. Memo : 0 When an SD card without any clips is inse ...
-
JVC GY-HM200E - page 84
Memo : 0 Clips appended with OK marks cannot be deleted on the camera recorder. 0 When [ Main Menu] B [System] B [Record Set] B [Record Format] B [ W Format] is set to “AVCHD”, the OK mark indicates that the clip is protected. ( A P 115 [ W Format ] ) B Continued From Mark This mark indicates that the current clip is continued from another SD c ...
-
JVC GY-HM200E - page 85
K Network Connection Icon K 0 The network connection status is displayed when [Main Menu] B [System] B [Network] is set to “On”. This icon is not displayed when “Off” is selected. ( A P 130 [Network Connection Icon K ] ) Detailed screen * Items that are common with the Standard screen will not be described. Refer to “[Standard screen] ( A ...
-
JVC GY-HM200E - page 86
Item Description FTP Upload Uploads a clip to the FTP server. 0 This Clip: Uploads the clip pointed by the cursor. 0 Selected Clips: Uploads the clips selected (appended with check mark). 0 All Clips: Uploads all clips. Delete Clips Deletes clip. However, clips with OK mark cannot be deleted. 0 This Clip: Deletes the clip pointed by the cursor. 0 S ...
-
JVC GY-HM200E - page 87
Time Code Playback Time code or user’s bit recorded on an SD card can be displayed on the LCD monitor and viewfinder. Memo : 0 The time code is also superimposed on the video signal output from the [SDI OUT] terminal. K 0 If a section without time code is played back, the time code will stop. However, playback will continue. Displaying Informatio ...
-
JVC GY-HM200E - page 88
3 Select [Delete Clips] B [This Clip] and press the Set button ( R ). A screen to confirm deletion appears. . 3 All Clips Selected Clips This Clip 4 Select [Delete] using the cross-shaped button ( JK ), and press the Set button ( R ). Deleting starts. . 4 Stop Deleting... Cancel Delete Delete This Clip? Selecting and Deleting Multiple Clips To sele ...
-
JVC GY-HM200E - page 89
During Playback or Pause Screen 1 Press [LOLUX/3] button during clip playback. 0 If the clip does not have an OK mark, an OK mark will be appended. 0 If the clip is appended with an OK mark, the OK mark will be deleted. . 1000/2000 12:34:56 12:34:56 Jan 24,2015 Jan 24,2015 00:00:00.00 00:00:00.00 x5 x5 x5 x5 3840x2160 3840x2160 16.4V 16.4V 2/4 2/4 ...
-
JVC GY-HM200E - page 90
Selecting Multiple Clips Consecutively 1 Press the [ZEBRA/5] button. 2 Select “Select Range” in the action selection screen, and press the Set button ( R ). . FTP Upload... Delete OK Mark... Add OK Mark... Deselect All Select Range Select OK Marked Select All Clips 2 3 Move the cursor to the beginning (or end) of the range for multiple selectio ...
-
JVC GY-HM200E - page 91
Trimming Recorded Clips You can extract (trim) the necessary parts of a clip recorded in the SD card. The trimmed clip is saved as a new file on the same SD card as the original clip. No changes are made to the original clip. 1 Switch to Media mode. Switch the mode using the [MODE] selection button on the side control panel. 2 Move the cursor to th ...
-
JVC GY-HM200E - page 92
Basic Operations in Menu Screen 0 Press the [MENU/THUMB] button on the LCD monitor to display the menu screen on the LCD monitor and viewfinder. 0 Various settings for shooting and playback can be configured on the menu screen. 0 There are two types of menu screens - [Main Menu] and [Favorites Menu]. 0 [Main Menu ] contains all the setting items of ...
-
JVC GY-HM200E - page 93
Display and Description of the Menu Screen Selecting Menu Items . Add Fav o r i t e s SEC Shutter 24hour Time Style YMD Date Style On Date/Time Time Battery Off Audio Meter Display Settings H I F E B D G A C A Cursor Indicates the selected item. Use the cross- shaped button ( JK ) to move the cursor B Menu Item 0 Displays the names of the menu item ...
-
JVC GY-HM200E - page 94
Text Input with Software Keyboard Use the software keyboard to enter the [Setup File ] subname, [Clip Name Prefix], and the settings under [Network] B [Settings]. Entering a subname ( A P136 [Configuring Setup Files] ) . G A E H C B D F Entering the [Clip Name Prefix] ( A P 118 [ Clip Name Prefix ] ) . Cancel Set A E H C B D Settings under [Network ...
-
JVC GY-HM200E - page 95
Menu Screen Hierarchical Chart [Main Menu...] ....................................... ( A P 95) - [Camera Function... ] .......................... ( A P 96) - [ Bars] ............................................. ( A P 96) - [OIS] .............................................. ( A P 96) - [Flicker Correction] ........................ ( A P 96) - [S ...
-
JVC GY-HM200E - page 96
Camera Function Menu Menu screen for specifying operation settings during shooting. This item can only be selected in the Camera mode. Bars For setting whether to output color bars. [Setting Values: On, R Off] Memo : 0 The audio test signals (1 kHz) can be output simultaneously with the color bar output. ( A P112 [ Test Tone ] ) OIS For setting whe ...
-
JVC GY-HM200E - page 97
FAW For setting the position in the white balance switch [WHT.BAL B/A/PRST] to assign the FAW (Full Auto White Balance) function. [Setting Values: R None, PRST, A, B] GAIN L/GAIN M/GAIN H For setting the gain value of each position on the [GAIN] selection switch. The setting is fixed at “AGC” in the Full Auto mode. In addition, the sensitivity ...
-
JVC GY-HM200E - page 98
User Switch Set Item USER1 ~ USER9, LCD KEY▲/LCD KEY▶/LCD KEY▼/LCD KEY◀ By assigning one of the following functions to each of the [F.ASSIST/1], [TC/2], [LOLUX/3], [C.REVIEW/4], [ZEBRA/5], [OIS/6], [REC/7], [EXPANDED FOCUS/8], [AWB/9] buttons or the cross-shaped buttons on the LCD monitor, these buttons can be used to control the assigned f ...
-
JVC GY-HM200E - page 99
AE/FAW Lock For specifying the operation when any of the [USER1]-[ USER9], [LCD KEY▲], [LCD KEY▶], [LCD KEY▼], or [LCD KEY◀] items is set to “AE/FAW Lock”. 0 FAW: Fixes the FAW (Full-time Auto White Balance) setting to the value at the point the user button assigned with “ AE/FAW Lock” is pressed. 0 AE: Use this feature to fix a val ...
-
JVC GY-HM200E - page 100
Camera Process Menu Menu screen for adjusting the quality of camera images. This item cannot be selected in the Media mode. Detail For adjusting the contour (detail) enhancement level. Increasing the value increases the sharpness of the contour. [Setting Values: -10 to +10, Off ( R 0)] 9 Adjust... For specifying the detailed settings of the contour ...
-
JVC GY-HM200E - page 101
9 Sensitivity For setting the response speed of the “Knee” operation when [Knee] is set to “Auto”. Set to “Slow” when shooting an object under a condition where there is drastic change in the light intensity. [Setting Values: R Fast, Middle, Slow] Memo : 0 When [Knee] is set to “Manual”, or [WDR] is set to other than “Off”, this ...
-
JVC GY-HM200E - page 102
Color Matrix For setting the color matrix. 0 Cinema Subdued: Sets to a subdued color matrix that is similar to the screen characteristics of movies. 0 Cinema Vivid: Sets to a vivid color matrix that is similar to the screen characteristics of movies. 0 Standard: Sets to a standard color matrix. [Setting Values: Cinema Subdued, Cinema Vivid, R Stand ...
-
JVC GY-HM200E - page 103
AWB Paint For adjusting the R (red)/B (blue) component in the AWB (Auto White Balance) mode. For details, refer to “[Adjusting the White Balance] ( A P 60)”. 0 Increase the number: Strengthens the red/blue. 0 Decrease the number: Weakens the red/blue. [Setting Values: -32 to +32 ( R 0)] Memo : 0 This item is selectable when the [WHT.BAL B/A/PRS ...
-
JVC GY-HM200E - page 104
9 Preset For setting the user’s bit. (Digit by digit) Display : AB CD EF 01 ( A P71 [Presetting the User’s Bit] ) Memo : 0 When [UB Mode] is set to “Date” or “Time”, this item appears as “---” and preset is disabled. Drop Frame For setting the framing mode of the time code generator. 0 Non Drop: Internal time code generator works in ...
-
JVC GY-HM200E - page 105
VF Bright For setting the brightness of the viewfinder screen. Increasing the value increases the brightness. [Setting Values: -10 to +10 ( R 0)] VF Contrast For setting the difference in luminance between the darkest and brightness areas in the viewfinder screen. Increasing the value increases the contrast. [Setting Values: -10 to +10 ( R 0)] LCD ...
-
JVC GY-HM200E - page 106
Marker Settings Item For setting the marker and safety zone, which are useful in helping you determine the angle of view for the image according to the shooting purpose. ( A P135 [Marker and Safety Zone Displays (Camera Mode Only)] ) Memo : 0 During Clip Review or when in the Media mode, the markers do not appear regardless of the setting. Marker F ...
-
JVC GY-HM200E - page 107
Display Settings Item This menu is used to set the displays on the LCD monitor and viewfinder screen. Zoom For setting the display method of the zoom position. 0 Number: Displays the zoom position in numbers (0-99). 0 Bar: Displays the zoom position in a bar. 0 Off: Does not display the zoom position. [Setting Values: Number, R Bar, Off] Focus For ...
-
JVC GY-HM200E - page 108
Memo : 0 The battery mark that appears before the “Time”, “Capacity%” or “Voltage” value changes according to the remaining battery power. In addition, the plug mark is added during charging. 4 S : 10 % and below D R : 11 % to 30 % C Q : 31% to 70 % B P : 71 % to 100 % 0 When the remaining battery power is low, “RES” instead of the ...
-
JVC GY-HM200E - page 109
A/V Set Menu Menu screen for video output and audio. Video Set... For specifying video output-related settings. ( A P109 [Video Set Item] ) Audio Set... For specifying audio-related settings. ( A P110 [Audio Set Item] ) Video Set Item Display On TV For setting whether to display the display and menu characters on the external monitor. [Setting Valu ...
-
JVC GY-HM200E - page 110
SD Aspect For setting the style of displaying images with a 16:9 aspect ratio on a 4:3 aspect ratio screen. 0 Letter: Displays as a wide image with the top and bottom blackened. 0 Squeeze: Displays image that is squeezed horizontally. [Setting Values: Letter, R Squeeze] Memo : 0 When [Record Format ] B [System] is set to “SD”, and [Record Forma ...
-
JVC GY-HM200E - page 111
XLR Manual Level O For setting whether to link manual audio adjustment operation between [INPUT1] and [INPUT2] terminals. Select “Link” to link or “Separate” to separate. When this item is set to “Link”, adjust the recording level using the [CH1] recording level adjustment knob. [Setting Values: Link, R Separate] Memo : 0 This item is n ...
-
JVC GY-HM200E - page 112
Int. Mic Wind Cut For selecting whether to cut the low frequencies of the audio input signals (low-cut) from the built-in microphone. Set this item to “On” to reduce wind noise from the microphone. [Setting Values: On, R Off] Memo : 0 This item is enabled in the following cases. 0 When the [CH1] or [CH2] selection switch is set to “INT”. O ...
-
JVC GY-HM200E - page 113
System Menu This menu screen allows system-related settings. For specifying recording settings, formatting and restoring of SD card, tally lamp settings, network settings, date/time, time zone, and other settings. It can also be used to reset the menu settings to their default values. Record Set... For specifying recorded video-related settings. ( ...
-
JVC GY-HM200E - page 114
9 Import Metadata 0 For importing metadata from the FTP server. K 0 Deletes the metadata loaded using the setup files ( “User File”/“All File”). Memo : 0 This option is not available when [Network] is set to “Off”. 9 Settings... For specifying network-related settings. ( A P118 [Network/Settings Item K ] ) Memo : 0 This option is not av ...
-
JVC GY-HM200E - page 115
9 System For selecting a system definition. 0 4K: Records in “4K” quality for both slots A and B. 0 HD: Records in “HD” (High Definition) quality for both slots A and B. 0 SD: Records in “SD” (Standard Definition) quality for both slots A and B. 0 HD+Web: Records in “HD” (high definition) for slot A, and in resolution suitable for w ...
-
JVC GY-HM200E - page 116
9 Y Resolution For selecting the size of the image to be recorded to the SD card in slot B when [System] is set to “HD +Web”. (Horizontal x vertical) The available options vary according to the [ W Frame Rate] and [ Y Format] settings. 0 When [ Y Format] is set to “QuickTime ”: [Setting Values: 960x540, 720x576, 720x480, 480x270] 0 When [ Y ...
-
JVC GY-HM200E - page 117
Slot Mode For setting the operation of the card slot. 0 Series: Mode that activates the two slots sequentially. 0 Dual: Mode that activates the two slots at the same time. ( A P74 [Dual Rec] ) 0 Backup: Mode that enables recording to slot B without using the [REC] button. This item is selectable only when [Rec Mode] is set to “Normal”. Start or ...
-
JVC GY-HM200E - page 118
Clip Set 9 Clip Name Prefix For setting the first four characters of the name of the clip file to be recorded to the SD card. Enter any of the 36 characters including alphabets (upper case) and numbers (0 to 9) using the software keyboard. ( A P94 [Text Input with Software Keyboard] ) [Setting Values: xxxG] (The default value of xxx is the last thr ...
-
JVC GY-HM200E - page 119
9 Live Streaming Starts live distribution when “On” is selected. [Setting Values: On, R Off] Memo : 0 “On” cannot be selected if network connection is not established. 0 “On” cannot be selected when FTP is running. 0 Live streaming switches to “Off” when the power is turned off. 9 Server For selecting the server for live streaming. ...
-
JVC GY-HM200E - page 120
9 Resolution For setting the resolution of the video image during live distribution. The available options vary according to the settings for [ W Resolution] and [ W Frame Rate] under [Record Format]. W Resolution W Frame Rate Setting values ( R : default value) 1920x1080 60p, 30p R 1920x1080, 1280x720, 720x480, 480x270 50p, 25p R 1920x1080, 1280x7 ...
-
JVC GY-HM200E - page 121
Connection Setup For configuring the network connection settings. A [Wizard] screen will appear according to the adapter connected to the [ HOST] terminal. Follow the instructions to perform the setting. You can Load, Store, and Delete the settings specified on the [Wizard] screen. 9 Wizard A [Wizard] appears according to the adapter connected to t ...
-
JVC GY-HM200E - page 122
Clip Server For setting the server and directory for uploading recorded clips in the SD card to the FTP server. 9 Clip-FTP1 to Clip-FTP4 (The name specified in the respective [Alias ] items is displayed) o Alias For setting a name to distinguish the settings of this camera recorder. The name set in this item will appear on the [FTP Upload] action s ...
-
JVC GY-HM200E - page 123
Adding/Editing Frequently Used Menu Items (Favorites Menu) You can select and add/edit frequently used menu items freely to create a personal menu screen (Favorites Menu). Memo : 0 [Favorites Menu ] is only enabled in the Camera mode. [Favorites Menu] remains unchanged even when the recording format changes. 0 Up to 20 menu items can be added. 0 Ad ...
-
JVC GY-HM200E - page 124
Editing Favorites Menu You can delete or change the order of the items added to [Favorites Menu]. Deleting Items from [Favorites Menu] 1 Open the [Favorites Menu] screen. A Press the [MENU] button to open the [ Main Menu] screen. B Press the [DISPLAY] button or press and hold down the [MENU] button to open the [Favorites Menu] screen. 2 Select [Edi ...
-
JVC GY-HM200E - page 125
Changing the Order of Items in [Favorites Menu ] . 1 Open the [Favorites Menu] screen. Press the [MENU] button to open the [Favorites Menu] screen. 2 Select [Edit Favorites] and press the Set button ( R ) or crossed-shaped button ( I ). The header turns magenta and the editing mode is activated. . 2 Header (Magenta) Camera F unction... Edit F av or ...
-
JVC GY-HM200E - page 126
6 Press the [LOLUX/3] button. The option menu to exit the [Favorites Menu] editing mode appears. 7 Select [Save & Exit] and press the Set button ( R ). . 7 Cancel Exit without Saving Sav e & Exit Edit F av orites Memo : 0 Moving is not complete until the changes are saved with [Save & Exit]. 0 To exit the editing mode without saving any ...
-
JVC GY-HM200E - page 127
Display Screen in Camera Mode Display 0 screen This screen displays the event. It is also used to display warnings only. . 100min 50min 282min 0 1/ 1 0 0 F1 . 6 18 dB AE + 6 N D 1 / 16 5 . 6 f t P 15000K 100m in 50m in 2 82 m in 1 / 1 00 F 1 . 6 18 d B AE + E E 6 ND 1 / 16 5 . 6 f t P 15000 K H I ※ 2 ※ 1 ※ 2 A Y U X W a *1 Appears onl ...
-
JVC GY-HM200E - page 128
Icon Status . FTP transfer is in progress. Three images are alternately displayed, and the arrows become animated. In this case, instead of the recordable time of the SD card, an estimated value of the remaining transfer time is displayed. . (Yellow) Error has occurred during FTP transfer. Memo : 0 This item is not displayed when [Main Menu] B [LCD ...
-
JVC GY-HM200E - page 129
J AE Lock The U icon is displayed during AE lock. K White Balance Mode Displays the current white balance mode. (*****K indicates color temperature) A<*****K> : When the white balance is set to A. B<*****K> : When the white balance is set to B. P<*****K> : When the white balance is set to PRST. P< R *****K> : The color tempe ...
-
JVC GY-HM200E - page 130
R Focus Assist 0 “FOCUS ” is displayed when auto focus is activated. 0 When ACCU-Focus is enabled, “ACCU- FOCUS ” blinks for about 10 seconds while Focus Assist starts up, after which the “FOCUS” indicator lights up. 0 If recording starts while [ACCU-Focus] is active, [ACCU-Focus] will be forcibly deactivated. ( A P105 [ Focus Assist ] ...
-
JVC GY-HM200E - page 131
Memo : 0 You can specify whether to display the time code, user’s bit, or turn off the display in [LCD/VF] B [Display Settings ] B [TC/UB]. This item will not be displayed when “Off” is selected. ( A P 107 [ TC/UB ] ) W Live streaming mark K When [Main Menu] B [System] B [Network]/ [Settings] B [Live Streaming Set ] B [Live Streaming] is set ...
-
JVC GY-HM200E - page 132
Display Screen in Media Mode Media Display 0 Screen This screen displays the media status or event. It is also used to display warnings only. . 282min 00:00: 00.0 0 1000/ 2000 0 A G I M P N O L 2 82 m i n ※ * Appears only during warnings Media Display 1 Screen . 282min 0 12 : 34 : 56 Jan 24 , 2015 00:00: 00.0 0 3840x216 0 30p 150M 4030 20 10 0 10 ...
-
JVC GY-HM200E - page 133
I Information Display The camera information display turns on and off each time you press the [OIS/6] button. 0 Camera information display displays only information of Gain, Iris, Shutter and White Balance that have been recorded. . P 13000K 1/ 1 0 0 F1 . 6 0 dB Camera Inf ormation Display Memo : 0 Trimming information is displayed while trimming i ...
-
JVC GY-HM200E - page 134
Status Screen For checking the settings of the camera recorder. Camera 1 Screen/Camera 2 Screen For checking information related to shooting using the camera recorder. . Aspect Marker Zebr a Camera 1 Safety Zone Format Format None Handle Zoom Speed H Handle Zoom Speed M Handle Zoom Speed L GAIN H GAIN M GAIN L FAW Camera 2 Off USER Switch Set Scree ...
-
JVC GY-HM200E - page 135
Marker and Safety Zone Displays (Camera Mode Only) The marker and safety zone displays are useful in helping you determine the angle of view for the image according to the shooting purpose. The marker is displayed only in the Camera mode. Displaying the Grid Marker 1 Set [LCD/VF] B [Marker Settings ] B [Grid Marker] to “On”. ( A P 106 [ Grid Ma ...
-
JVC GY-HM200E - page 136
Configuring Setup Files The menu settings can be stored on an SD card by saving them as a setup file. Loading a saved setup file enables you to reproduce the appropriate setup state speedily. The following types of setup files are available. o Picture file: File that contains image creation settings in accordance to the shooting conditions ([Camera ...
-
JVC GY-HM200E - page 137
6 Select [Store] and press the Set button ( R ). . 6 5 7 Save the file. 0 A confirmation screen appears when you choose to overwrite. Select [Overwrite] on the confirmation screen, and press the Set button ( R ). Saving starts, and “Storing...” appears on the screen. . :SUNSET 7 Load Picture File Cancel Overwrite Overwrite Picture File? 0 Savin ...
-
JVC GY-HM200E - page 138
Connecting External Monitor 0 To output live or playback video images and audio sound to an external monitor, select the output signals from the camera recorder, and connect using an appropriate cable according to the monitor to be used. 0 Choose the most suitable terminal according to the monitor in use. 0 [SDI OUT] terminal K : Outputs either the ...
-
JVC GY-HM200E - page 139
Connecting via SDI K 0 Digital video signals, together with embedded (superimposed) audio signals and time code signals, are output for both the 3G-SDI/HD-SDI and SD-SDI signals. Memo : 0 The sampling frequency for embedded (superimposed) audio signals is 48 kHz. Time code of the built-in time generator as well as playback time code are also output ...
-
JVC GY-HM200E - page 140
Connecting Wired Remote Control You can operate the functions of this unit with a wired remote control. Memo : 0 When the switches of the camera recorder and remote control unit are operated at the same time, the switch operation of the remote control unit takes priority over that of the camera recorder. 1 Connect a wired remote control to the came ...
-
JVC GY-HM200E - page 141
2 Select [Change] using the cross-shaped button ( JK ), and press the Set button ( R ). The camera recorder switches to USB mode. . 2 Cancel Change Change to USB Mode? Memo : 0 If recording is in progress, the “Change to USB Mode?” message appears after recording stops. 0 If playback is in progress, the camera recorder switches to USB mode afte ...
-
JVC GY-HM200E - page 142
Functions of Network Connection K 0 The network function can be operated by connecting one of the following adapters to the [HOST] terminal at the side terminal section. 0 Wireless LAN adapter 0 Ethernet adapter 0 Cellular adapter ( A P143 [Camera Setup for Network Connection] ) 0 The network feature comprises web-browser- based functions using dev ...
-
JVC GY-HM200E - page 143
Camera Setup for Network Connection 1 Connect an appropriate adapter according to the intended use to the [HOST] terminal at the side terminal section of the camera recorder. The following adapters can be connected. 0 Wireless LAN adapter 0 Ethernet adapter 0 Cellular adapter . Connect an appropriate adapter Memo : 0 Only a network connection adapt ...
-
JVC GY-HM200E - page 144
P2P Connection You can access the web function of this camera recorder from devices such as a smartphone, tablet terminal, or PC. 1 [Wireless LAN] appears on the [Wizard] screen. . Back Next Wireless LAN A vailable Adapter 2 Press the I button to display the [Select Connection Type] screen. Select “P2P”. Follow the screen instructions to comple ...
-
JVC GY-HM200E - page 145
Connecting via Wired LAN You can connect a device such as a smartphone, tablet terminal, or PC directly to the camera recorder using a cross cable to access the camera recorder’s web functions. Alternatively, you can also connect using an Ethernet hub. 1 Connect the [HOST] terminal on the camera recorder to the smartphone, tablet terminal, PC, et ...
-
JVC GY-HM200E - page 146
Importing Metadata K You can download a metadata settings file (XML format) from the FTP server and store metadata in the camera recorder. The imported metadata is applied to clips to be recorded. Preparing Metadata 0 You can record the four metadata types below. Title1 : ASCII only, max. 63 characters (bytes) Title2 : UNICODE, max. 127 bytes Creat ...
-
JVC GY-HM200E - page 147
Importing Metadata Download the metadata settings file (XML format) from the FTP server. 1 Select [Main Menu] B [System] B [Network] B [Import Metadata] and press the Set button ( R ). The [Import Metadata] screen appears. . Import Metadata 2 Select the server for importing the metadata. 0 The name that is registered in [Metadata Server] B [Alias] ...
-
JVC GY-HM200E - page 148
Uploading a Recorded Video Clip K Upload clips recorded in the SD card to a preset FTP server. Configuring the FTP Server for Uploading For specifying the settings for connecting to the FTP server to upload recorded clips to (domain name, user name, password, etc.) as well as the directory of the upload destination. 1 Open the [Clip Server] screen. ...
-
JVC GY-HM200E - page 149
5 Upload is complete. 0 After upload is complete, “Successfully Completed.” appears on the screen. 0 Press the Set button ( R ) to return to the thumbnail screen. . 5 Exit Successfully Completed. FTP Upload Selecting and Uploading Multiple Clips To select and upload multiple clips, refer to “[Selecting and Performing Operations on Multiple Cl ...
-
JVC GY-HM200E - page 150
4 Upload is complete. 0 After all clips are uploaded successfully, “Successfully Completed.” is displayed. Press the Set button ( R ) to return to the thumbnail screen. 0 When clips are not uploaded successfully, the following errors are displayed. . Cause of Error Exit Internal Error . F ailed. FTP Upload ( A P 171 [List of FTP Transfer Errors ...
-
JVC GY-HM200E - page 151
3 Enter the user name and password. Enter the user name (jvc) and the password (initial password: 0000) on the login screen to display the main page of the camera. . Memo : 0 The password can be altered in [Main Menu] B [System] B [Network]/[Settings] B [Web] B [Change Password]. ( A P 118 [ Login Password ] ) Editing Metadata K You can create the ...
-
JVC GY-HM200E - page 152
3 Editing Metadata A Enter information for the necessary fields. B After input is complete, tap (click) [Save ] to overwrite the metadata. . A B K eyboard Done 4 Tap (click) [ OK] on the confirmation screen. 0 Update of the [Planning Metadata ] starts. 0 After update is complete, “Renewal of planning metadata is succeeded.” is displayed. Tap (c ...
-
JVC GY-HM200E - page 153
o Switching from a web browser A You will see a message indicating “It is necessary to change the camera mode to "Remote Edit Mode". Change the mode.” on the web browser. . A B Change Cancel It is necessary to change the camera mode to "Remote Edit Mode". Change the mode. B Tap (click) [Change] to switch the camera to the Re ...
-
JVC GY-HM200E - page 154
6 Editing the Metadata of Selected Clips A Edit the information for the necessary fields. 0 If you are using a PC, input using the mouse and keyboard. 0 If you are using a smartphone or tablet terminal, tap the text input area to display a standard software keyboard on the screen. Enter the information using the displayed keyboard. B You can tap (c ...
-
JVC GY-HM200E - page 155
Uploading a Recording Clip via a Web Browser K 0 Upload clips recorded in the SD card to a preset FTP server. 0 You can upload selected clips, all clips, or those appended with an OK mark. Configuring the FTP Server for Uploading ( A P 148 [Configuring the FTP Server for Uploading] ) Uploading Video Clips 1 Access the main page of the camera. Acces ...
-
JVC GY-HM200E - page 156
Memo : 0 When the menu or status is displayed, display of the confirmation screen will be put on hold. 0 If the menu is displayed on the camera recorder, close the menu. 0 If the status is displayed on the camera recorder, close the status display. 0 Pressing the Set button ( R ) on the camera recorder while in the Remote Edit Mode ends the Remote ...
-
JVC GY-HM200E - page 157
8 Select the clip server and start uploading. 0 Upon selecting the server to upoload clips to, an upload screen appears. . 8 0 The status of the transfer process is indicated by a progress bar. . Memo : 0 To stop transfer, tap (click) the [Stop] button. Tapping (clicking) [Yes] on the confirmation screen stops the transfer halfway and brings you ba ...
-
JVC GY-HM200E - page 158
9 Upload is complete. 0 After upload is complete, “Successfully Completed.” appears on the screen. . 9 Exit Successfully Completed. FTP Upload 0 When clips are not uploaded successfully, the following errors are displayed. . Cause of Error Exit Internal Error . F ailed. FTP Upload ( A P 171 [List of FTP Transfer Errors K ] ) Memo : 0 Follow “ ...
-
JVC GY-HM200E - page 159
A Page Switch Tab Tap (click) this tab to move to the [Planning Metadata], [Clip Metadata], or [Settings] screen. B Live View Screen Displays the live images. Tap a live image to display or hide information that is displayed on the live image, such as remaining space on the media and time code. C [Clear] Button Switches to the Delete Preset Zoom Po ...
-
JVC GY-HM200E - page 160
4 In the same way, register [B] and [C]. After all three positions A, B and C are registered, the positions of the [A], [B] , and [C] buttons will be rearranged according to the order of the registered zoom position from the left. . 26min 26m in 50min 50m in 01:12:54.19 01: 12: 54 .19 STBY S TB Y 282min 282 min HM200 HM2 00 Z 0 Z 0 5 Exit the Regis ...
-
JVC GY-HM200E - page 161
Camera Control Function K You can control the camera by accessing via a web browser on devices such as a smartphone, tablet terminal, or PC. You can perform the following operations for each of the items. . A B C D E F A REC For performing recording start or recording pause operation. . B CAMERA Enables operations related to the camera functions. . ...
-
JVC GY-HM200E - page 162
D FOCUS Enables focusing operations. . E USER SWITCH You can enable or disable the user buttons that are assigned with a function. . F MENU You can show or hide the display and menu characters on an external monitor as well as operation of menus, switching the display screen and status display. . Configuring Settings via a Browser K You can change ...
-
JVC GY-HM200E - page 163
A View Remote Settings for operations on the View Remote. B Connection Setup Settings related to the network. You can change the settings for each of the preset items on the [Wizard ] screen of the camera recorder. C Metadata Server Settings on the server for importing the metadata. Setting can be performed in the same way as the Metadata Server me ...
-
JVC GY-HM200E - page 164
Changing Connection Setup You can change the settings for each of the preset items on the [Wizard] screen of the camera recorder. 0 If all the items cannot be displayed in a single page, scroll down to display the remaining items. 0 Items that cannot be changed are grayed out according to the type of adapter connected and the mode of connection. . ...
-
JVC GY-HM200E - page 165
Changing Metadata Server Settings You can make direct changes to the FTP server for importing the metadata set in [Main Menu] B [System] B [Network]/[Settings] B [Metadata Server], as well as the path of the file to import. ( A P121 [ Metadata Server ] ) Changing Clip Server Settings You can make direct changes to the server and directory settings ...
-
JVC GY-HM200E - page 166
5 Select [Store] and press the Set button ( R ). . 5 4 6 Save the file. 0 A confirmation screen appears when you choose to overwrite. Select [Overwrite] on the confirmation screen, and press the Set button ( R ). Saving starts, and “Storing...” appears on the screen. . :KAMAKURA 6 Cancel Overwrite CAM3 Setup? Overwrite Connection 0 Saving start ...
-
JVC GY-HM200E - page 167
Deleting Connection Settings 1 Select [Main Menu] B [ System] B [Network]/[Settings] B [Connection Setup] and press the Set button ( R ). 2 Select [Delete] and press the Set button ( R ). . 2 Delete Store Load Wizard Connection Setup 3 Select the file to delete using the cross- shaped button ( JK ), and press the Set button ( R ). . 3 CAM3 CAM2 CAM ...
-
JVC GY-HM200E - page 168
Supported Protocols Network protocols : TCP, UDP Transport mode : MPEG2-TS, RTSP/RTP, ZIXI, RTMP Setting Distribution 1 Set the [Record Format] according to the resolution and frame rate of the video to be distributed. For details on the [Record Format] settings, please refer to [Combinations of [Record Format] and [Live Streaming Set] that Support ...
-
JVC GY-HM200E - page 169
Starting Distribution 1 Perform the necessary setting for the decoder and PC application. For details on the settings, please refer to the instruction manual of the respective devices and applications. Memo : 0 If there is an NAT router within the communication path between the camera and the decoder, port forwarding setup is required. For details ...
-
JVC GY-HM200E - page 170
Error Messages and Actions Warning display on the LCD monitor and viewfinder screen, tally lamp indication and warning tone are as follows according to the error status. Memo : 0 This camera recorder makes use of a microcomputer. Noise interference from external sources may prevent it from functioning properly. When this occurs, turn off and on the ...
-
JVC GY-HM200E - page 171
Error Message Status Action Record Format Incorrect 0 The video format of the file for Clip Review is different from the current [ W Resolution], [ W Frame Rate], or [ W Bit Rate] setting. Set [ W Resolution], [ W Frame Rate] and [ W Bit Rate] correctly. ( A P115 [ W Resolution ] ) ( A P115 [ W Frame Rate ] ) ( A P115 [ W Bit Rate ] ) Media Full 0 ...
-
JVC GY-HM200E - page 172
Error message Status Action Access Denied. Access is denied. Adjust the Server and Port settings for [Metadata Server ] or [Clip Server]. ( A P121 [ Metadata Server ] ) ( A P122 [ Clip Server ] ) Invalid Username or Password. Authentication for login to the FTP server failed. Adjust the Username and Password settings for [Metadata Server ] or [Clip ...
-
JVC GY-HM200E - page 173
List of Live Streaming Error Displays K The following error messages are displayed when the live streaming setting is incorrect, or when the connection is lost during live streaming. Error message Status Action Invalid Address. 0 The IP address format is incorrect. 0 The domain name cannot be converted into the IP address. 0 Enter the IP address, h ...
-
JVC GY-HM200E - page 174
Blinking of the Tally Lamp The tally lamp start blinking when the remaining space on the SD card is running out during recording, or when the battery power is running low. Blinking Mode Remaining Battery Power/SD Card Space Blinks slowly (once every second) 0 Battery power is low 0 Remaining recording time on SD card is less than 3 minutes (during ...
-
JVC GY-HM200E - page 175
Symptom Action The [CH1/CH2] recording level adjustment knob does not work. O 0 Is the [CH1/CH2 AUTO/MANUAL] switch set to “AUTO”? 0 Is Full Auto enabled? Is [A/V Set] B [Audio Set] B [ Audio On FULL AUTO] set to “Auto” in Full Auto mode? ( A P 112 [ Audio On FULL AUTO ] ) SD card cannot be initialized (formatted). 0 Is the write-protect sw ...
-
JVC GY-HM200E - page 176
Specifications General Item Description Power DC 12 V Power consumption K 0 Approx. 7.9 W (*1) 0 Approx. 7.3 W (*2) M 0 Approx. 7.6 W (*1) 0 Approx. 6.7 W (*2) Mass K 0 Approx. 1.6 k g (with battery) M 0 Approx. 1.2 k g (with battery) Allowable operating temperature 0 °C to 40 °C (32 °F to 104 °F) Allowable operating humidity 30 %RH to 80 %RH A ...
-
JVC GY-HM200E - page 177
Video/Audio Item Description Recording time Approx. 25 minutes (8 GB SD card, 35 Mbps, VBR mode) 4K mode Recording file format QuickTime File Format Video MPEG-4 AVC/H.264 150 Mbps (Max) 3840x2160/30p, 25p, 24p Audio LPCM 2ch, 48 kHz/16 Bit HD mode (QuickTime) Recording file format QuickTime File Format Video YUV422 mode, XHQ mode MPEG-4 AVC/H.264 ...
-
JVC GY-HM200E - page 178
Dimensional Outline Drawing (Unit: mm) GY-HM200U/GY-HM200E . 307 149 207 197 245 62 (HOOD) 40 134 90 191 52.5 59 178 Specifications Others ...
-
JVC GY-HM200E - page 179
GY-HM170U/GY-HM170E . 307 149 197 245 62 (HOOD) 134 90 112 52.5 59 * The specifications and appearance of this product are subject to changes for further improvement without prior notice. Specifications 179 Others ...
-
JVC GY-HM200E - page 180
Index A AC adapter .......................................... 29, 31 Access point ............................................ 143 Action ........................................................ 85 AF assist .............................................. 51, 97 Aspect ratio ................................................ 49 B Backup rec .......... ...
-
JVC GY-HM200E - page 181
Trimming .................................................... 91 U USB mode ................................... 19, 36, 140 User button ................................................ 39 User’s bit .................................................... 68 V Video format .............................................. 47 View remote ................ ...
-
JVC GY-HM200E - page 182
Software License Agreement The software embedded in the Product (hereinafter the “Licensed Software”) provided by JVC KENWOOD Corporation (hereinafter the “Licensor”) is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software. Th ...
-
JVC GY-HM200E - page 183
Article 9 Destruction of the Licensed Software If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination. Article 10 Export Restriction 1. The User shall understand that the Licensed Software shall ...
-
JVC GY-HM200E - page 184
. GY-HM200U/GY-HM200E/ GY-HM170U/GY-HM170E 4K MEMORY CARD CAMERA RECORDER © 2015 JVC KENWOOD Corporation B5A-0573-00 ...
Hai una domanda su JVC GY-HM200E?
Utilizza il modulo sottostante
Se non hai risolto il problema con JVC GY-HM200E con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con JVC GY-HM200E è probabile che voglia condividere il modo di risolverlo.