Manuale per l’uso Crestron electronic TPS-IMPC

20 pagine 0.61 mb
Scarica

Vai alla pagina of 20

Summary
  • Crestron electronic TPS-IMPC - page 1

    Crestron TPS-IMPC Interface Module Operations Guide ...

  • Crestron electronic TPS-IMPC - page 2

    This document was prepared and written by th e Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of th eir respective owners. ©2003 Crestron Electronics, Inc. ...

  • Crestron electronic TPS-IMPC - page 3

    Crestron TPS-IMPC Interface Module Contents Interface Module: TPS-IMPC 1 Introduction ...................................................................................... 1 Features & Functions ............................................................. 1 Specificat ions ...................................................................... ...

  • Crestron electronic TPS-IMPC - page 4

    ...

  • Crestron electronic TPS-IMPC - page 5

    Crestron TPS-IMPC Interface Module Interface Module: TPS-IMPC Introduction Features & Functions The TPS-IMPC is an interface modul e designed for, and included with the Crestron  TPS-3000, TPS-5000, and TPS- 6000 tilt touchpanels. The sleek design of the touchpanel base le ft little room for all the connectors that define the touchpanel&apos ...

  • Crestron electronic TPS-IMPC - page 6

    Interface Module Crestron TPS-IMPC Physical Description The TPS-IMPC, shown in the following diagram, is supplied with the TPS-3000, TPS-5000, and TPS-6000 ti lt touchpanels. The module is housed in a black enclos ure with a silk-screened top panel. An AC adapter port, network connector, and video input connectors are located on one side of the uni ...

  • Crestron electronic TPS-IMPC - page 7

    Crestron TPS-IMPC Interface Module NTSC/PAL VIDEO The NTSC/PAL video input consists of three connectors; two BNC connectors for unbalanced video signals and one 6-pin mini-connector for twisted pair wiring of balanced video signals. The video signal is connected to these ports and requires a TPS-3000 or installation of the TPS-VID-1 or TPS-VID-2 vi ...

  • Crestron electronic TPS-IMPC - page 8

    Interface Module Crestron TPS-IMPC CAUTION: If power is provided to the TPS-IMPC from the +24VDC on a Cresnet connector or the PW-2420RU, power must not be applied to the power input on the touchpanel base. NOTE: When power is supplied through this connector, Crestron recommends disconnecting the +24 VD C on the Cresnet connector (if it is connecte ...

  • Crestron electronic TPS-IMPC - page 9

    Crestron TPS-IMPC Interface Module CAUTION: The 10-pin RJ-45 net/video connector cable supplied by Crestron is a custom cable and is th e only one that should be used. The end of the cable has a metal shield that is required to protect the equipment. Using non-Crestron cables will result in damage to the product. AUDIO (To Panel) AUDIO 1 This 8-pin ...

  • Crestron electronic TPS-IMPC - page 10

    Interface Module Crestron TPS-IMPC AUDIO INPUT Pinouts PIN DESCRIPTION S Shield R + Right Positive R - Right Negative L + Left Positive L- Left Negative S Shield MIC OUT The port mates with a three-pin connector (supplied) and produces line level differential output. Descriptio n of the pinouts is shown in the following table. MIC OUT Pinouts PIN D ...

  • Crestron electronic TPS-IMPC - page 11

    Crestron TPS-IMPC Interface Module Industry Compliance As of the date of manufacture, the TPS-IMPC has been tested and found to comply with specifications for CE marking and st andards per EMC and Radiocommunications Comp liance Labelling (N11785). Setup Network Wiring CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do ...

  • Crestron electronic TPS-IMPC - page 12

    Interface Module Crestron TPS-IMPC must be taken into consideration. If network units are to be daisy-chained on the run, the power factor of each network unit to be daisy-chained must be added together to determine the power factor of the entire chain. The length of the run in feet and th e power factor of the run should be used in the following r ...

  • Crestron electronic TPS-IMPC - page 13

    Crestron TPS-IMPC Interface Module TPS-5000 or TPS-6000 touchpanel a nd a video window object resides on a page within the uploaded Crestron VisionTools ® Pro-e (VT Pro-e) project. NOTE: When connecting the net/video cable from the interface module to the touchpanel, exceeding a cable length of 30 feet will significantly degrade the video signal. ...

  • Crestron electronic TPS-IMPC - page 14

    Interface Module Crestron TPS-IMPC Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPS-IMPC Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Touchpanel is not receiving power. Confi ...

  • Crestron electronic TPS-IMPC - page 15

    Crestron TPS-IMPC Interface Module TPS-IMPC Troubleshooting (continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Incorrect video format selection. Select the proper video input configuration in the touchpanel configuration SETUP MENU. Incorrect VT Pro-e project file loaded. Make sure that video window object resides in project, re- compile, and ...

  • Crestron electronic TPS-IMPC - page 16

    Interface Module Crestron TPS-IMPC Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the TPS-IMPC, additi onal information may be made available as manual updates. Thes e updates are solely electronic and serve as intermediary supplements pr ior to the release of a complete technical documentation rev ...

  • Crestron electronic TPS-IMPC - page 17

    Crestron TPS-IMPC Interface Module Return and Warranty Policies Merchandise Returns / Repair Service 1. No m erchandise may be returned for cr e dit, exchange, or service without prior authorization from CRESTRON. To obt ain warranty service for C RESTRON products, cont act the fact ory and req u est an RMA (R eturn Me rchandise Authorization) numb ...

  • Crestron electronic TPS-IMPC - page 18

    Interface Module Crestron TPS-IMPC 14 • Interface Module: TPS-IMPC Operations Guide - DOC. 6162 This page intenti onally left blank. ...

  • Crestron electronic TPS-IMPC - page 19

    Crestron TPS-IMPC Interface Module Operations Guide - DOC. 6162 Interface Module: TPS-IMPC • 15 This page intenti onally left blank. ...

  • Crestron electronic TPS-IMPC - page 20

    Crestron Electronics, Inc. Op erations Guide - DOC. 6162 15 Volvo Drive Rockleigh, NJ 07647 06.03 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice. ...

Fabbricante Crestron electronic Categoria Network Card

I documenti che otteniamo dal fabbricante del dispositivoCrestron electronic TPS-IMPC possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Crestron electronic
- manuali per l’uso TPS-IMPC
- schede prodotto Crestron electronic
- opuscoli
- o etichette energetiche Crestron electronic TPS-IMPC
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Crestron electronic TPS-IMPC.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Crestron electronic TPS-IMPC, manuali di manutenzione, brevi manuali o manuali utente Crestron electronic TPS-IMPC. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Crestron electronic TPS-IMPC.

Manuale completo del dispositivo Crestron electronic TPS-IMPC, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Crestron electronic TPS-IMPC dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Crestron electronic TPS-IMPC.

Il manuale per l’uso completo Crestron electronic, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Crestron electronic TPS-IMPC - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Crestron electronic TPS-IMPC, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Crestron electronic TPS-IMPC che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Crestron electronic TPS-IMPC - che ci dovrebbe aiutare nei primi passi durante l'uso Crestron electronic TPS-IMPC
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Crestron electronic TPS-IMPC
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Crestron electronic TPS-IMPC in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Crestron electronic TPS-IMPC?

Utilizza il modulo sottostante

Se non hai risolto il problema con Crestron electronic TPS-IMPC con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Crestron electronic TPS-IMPC è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Commenti (0)