-
Hobart XTF - page 1
Auto-Darkening W elding Helmet XT Series Models: XTF/XTV/XTP OM-221 534C 2006 − 03 ...
-
Hobart XTF - page 2
T able Of Contents SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING 1 . . . . . . . . . . . . . . . . . . . . SECTION 2 − SPECIFICA TIONS 2 . . . . . . . . . . . . . . . . . . . . . . . . SECTION 3 − OPERA TING INSTRUCTIONS 5 . . . . . . . . . . . . . . SECTION 4 − BA TTERY REPLACEMENT 8 . . . . . . . . . . . . . . . . SECTION 5 − MAI ...
-
Hobart XTF - page 3
Page 1 SECTION 1 − SAFETY PRECAUTIONS − READ BEFORE USING W arning! W atch Out! There are possible hazards as shown in the adjoining symbols. D Read and follow Section 1 for all safety symbols. ARC RA YS can burn eyes and skin. Arc rays from the welding process produce intense visible and invisible (ultravio- let and infrared) rays that can bur ...
-
Hobart XTF - page 4
Page 2 SECTION 2 − SPECIFICA TIONS XTF T echnical Specifications (Fixed Shade #10) Cartridge Dimensions 4.33 x 3.54 x 0.39 in (1 10 x 90 x 10 mm) V iewing Field 3.75 x 1.37 in (95 x 35 mm) Reaction T ime Light to dark: 0.00028 second (1/3,600) Dark to light: 0.12 second A vailable Shades Darkened State: #10 / Light State: #3 Sensors Independent ( ...
-
Hobart XTF - page 5
Page 3 XTV T echnical Specifications (#9 − #12 V ariable Shade) Cartridge Dimensions 4.33 x 3.54 x 0.39 in (1 10 x 90 x 10 mm) V iewing Field 3.75 x 1.57 in (95 x 40 mm) Reaction T ime 0.000083 second (1/12,000) A vailable Shades ANSI: Darkened State: #9 − 12 / Light State: #4 CE/CSA: Darkened State: #9 − 13 / Light State: #4 Sensors Independ ...
-
Hobart XTF - page 6
Page 4 XTP T echnical Specifications (Professional #9 − #13 V ariable Shade) Cartridge Dimensions 4.33 x 3.54 x 0.39 in (1 10 x 90 x 10 mm) V iewing Field 3.81 x 1.85 in (97 x 47 mm) Reaction T ime 0.0000625 second (1/16,000) A vailable Shades Darkened State: #9 − 13 / Light State: #4 Sensors Independent/redundant (T w o) Operating T emperature ...
-
Hobart XTF - page 7
Page 5 SECTION 3 − OPERA TING INSTRUCTIONS On/Auto-Off Button Locate the ON button and press ON to weld. The lens will automatically darken twice and then return to the light state. The helmet is then ready to weld. Note: The lens will Auto-Of f (clear state − #4) 15 − 20 minutes after the last arc. It will be necessary to press the ON button ...
-
Hobart XTF - page 8
Page 6 Sensitivity Control (XTV And XTP Models Only) Th e sensitivity control is used to make the lens more responsive to dif fe r- ing light levels experienced in various welding processes. W e recom- mend a (Mid-Range or 30 − 50%) sensitivity setting for most applica- tions. Please refer to the chart below for recommended settings. Recommended ...
-
Hobart XTF - page 9
Page 7 Adjustment of the Headgear for Maximum Comfort There are four adjustments on Hobart headgear that can be adjusted for maximum comfort: 1. Headgear T op – Adjusts headgear for proper depth on the head to en- sure correct balance and stability . 2. Headgear tightness – T o adjust, turn knob located on the back of the headgear left or right ...
-
Hobart XTF - page 10
Page 8 SECTION 4 − BA TTER Y REPLACEMENT Model X T V : Remove the batteries by sliding the cover plate to the left. Re- place with 2 AAA alkaline batteries. ( Note: be sure the positive (+) side of the battery is aligned with positive (+) terminal.) Replace cover plate and then press On button. Model XTP: Remove the batteries by turning the batte ...
-
Hobart XTF - page 11
Page 9 SECTION 6 − TROUBLESHOOTING Symptom Solution Not ON – auto-lens will not darken momentarily when turned on. Check batteries and make sure that they are in good condition and installed properly . Also, check battery surfaces and contacts and clean if necessary . Check battery for proper contact and gently adjust contact points if necessar ...
-
Hobart XTF - page 12
Page 10 SECTION 7 − LIMITED W ARRANTY Effective December 1, 2005 LIMITED W ARRANTY – Subject to the terms and conditions below . Hobart W elding Retail, Appleton, Wisconsin, warrants to its original retail purchaser that the new Ho- bart equipment sold after the ef fective date of this limited warranty is free of defects in material and workman ...
-
Hobart XTF - page 13
Page 1 1 SECTION 8 − REPLACEMENT P ARTS Item No. Description Stock No. 1* Kit, Lens Cover Flat Black 770425 Kit, Lens Cover Gloss Black 770426 Kit, Lens Cover Patriot (Blue) 770452 Kit, Lens Cover Red Rivet 770453 Kit, Lens Cover Blaze Orange 770454 2 Replacement XTF Lens 770455 Replacement XTV Lens 770427 Replacement XTP Lens 770238 3 Ratchet He ...
-
Hobart XTF - page 14
...
-
Hobart XTF - page 15
...
-
Hobart XTF - page 16
PRINTED IN USA © 2006 Hobart Welders Hobart W elders 1635 W est Spencer Street Appleton, WI 54914 USA Phone: 800-332-3281 V isit our website at www.HobartWelders.com ...
Hobart XTFについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもHobart XTFの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHobart XTFで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。