日本語 dropdown-ico

Cabletron Systems MMAC-Plus 9E312-12の取扱説明書

29ページ 0.42 mb
ダウンロード

ページに移動 of 29

Summary
  • Cabletron Systems MMAC-Plus 9E312-12 - page 1

    MMAC-Plus ™ 9E312-12 Ethernet Switch Module User’s Guide ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 2

    i Notice Notice Cabletron Systems r eserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletr on Systems to determine whether any such changes have been made. The hardwar e, firmware, or softwar e described in this manual is subject to ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 3

    ii Notice FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesir ed operation. NOTE: This equipment has been tested and found to c ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 4

    iii Notice DOC Notice This digital apparatus does not exceed the Class A limits for radio noise emissions fr om digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de br uits radioélectriques dépassant les limites applicables aux appareils num? ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 5

    v Contents Chapter 1 Intr oduction Features........................................................................................................................... 1-2 Related Manuals ............................................................................................................ 1-5 Getting Help ..................................... ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 6

    Contents vi Physical ........................................................................................................................... 5-2 Dimensions: ............................................................................................................ 5-2 W eight: ................................................................... ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 7

    1-1 Chapter 1 Intr oduction The 9E312-12 is a thirteen port switching module with twelve front panel Ethernet interfaces and one Internal Network Bus (INB) backplane interface. This module uses a Fast Packet Switch (FPS) hardwar e based switch design and an advanced Intel i960 ® micropr ocessor . This microprocessor pr ovides a platform for all ma ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 8

    Introduction 1-2 Features Processor The 9E312-12 is equipped with an advanced Intel i960 micropr ocessor . This micropr ocessor provides a platform for all management functions such as Spanning T ree, RMON, and MIB support within a scalable RISC-based architectur e. Fast P ac ket Switching The 9E312-12 incorporates a hardwar e based switch design r ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 9

    1-3 F eatures Management Information Base (MIB) Support The 9E312-12 provides MIB support including: • RMON (RFC-1271) • IETF MIB II (RFC-1213) • IETF Bridge MIB (RFC-1493) and a host of other Cabletron Enterprise MIBs. INB The 9E312-12 attaches to INB1 of the MMAC-Plus Backplane. The INB has a capacity of 2 Gbps to interconnect MMAC-Plus mod ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 10

    Introduction 1-4 Figure 1-1. The 9E312-12 Module 1 2 3 4 5 6 7 8 9 10 11 12 1 X X X X X X X X X X X X MMAC PLUS MMAC PLUS ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 11

    1-5 Related Manuals Related Manuals The manuals listed below should be used to supplement the procedur es and technical data contained in this manual. MMAC-Plus Installation Guide MMAC-Plus Operations Guide MMAC-Plus 9C300-1 Environmental Module User ’ s Guide MMAC-Plus 9C214-1 AC Power Supply User ’ s Guide MMAC-Plus Local Management User ’ ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 12

    2-1 Chapter 2 Installing the 9E312-12 Module The 9E312-12 module occupies two slots in the MMAC-Plus chassis. The module must be installed with the left side (as viewed from the fr ont) in an odd numbered slot, and the right side in an even numbered slot. T o install the 9E312-12 module, follow the steps below: 1. Remove the blank panels, covering ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 13

    Installing the 9E312-12 Module 2-2 W arning: Ensure that the circuit card is between the card guides . Lock do wn the top and bottom plastic tabs at the same time , applying e v en pressure. Figure 2-1. Installing the 9E312-12 Module J 7 F L NK 8 F L NK F L NK 10 F L NK I NS 11 F L NK I NS 12 RX TX RX TX RX Metal Back-Panel Circuit Card Card Guides ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 14

    2-3 Pinouts Pinouts The 9E312-12 front panel has twelve RJ-45 Ethernet connections, each of which is internally crossed over . Figure 2-2 illustrates a single RJ-45 Ethernet Connector . Figure 2-2. RJ-45 Ethernet Connector T able 2-1 details the pinout connections for an RJ-45 Ethernet connector . T able 2-1. Pinout Connections RJ-45 Ethernet conne ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 15

    Installing the 9E312-12 Module 2-4 The Reset Switch The reset switch is located on the fr ont panel, under the top plastic tab as shown in Figure 2-3. It serves two functions: r esetting the i960 processor and shutting down the module. • T o reset the pr ocessor , press the reset switch twice within thr ee seconds. • T o shut down the module, p ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 16

    2-5 User Accessible Components User Accessible Components Figure 2-4 shows the various components that can be accessed by users. These consist of an eight position dip switch (explained in the next section), replaceable PROMs, and sockets for memory and flash upgrades. These will be used for future upgrades. Instr uctions for installing the compon ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 17

    Installing the 9E312-12 Module 2-6 Setting the 9E312-12 Module DIP Switch The DIP switch on the 9E312-12 Module (Figur e 2-4 and Figure 2-4), is an eight switch DIP located on the top left corner of the module. Each switch is set according to the functions described in T able 2-2. If switch settings are changed, the pr ocessor on the module must be ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 18

    2-7 Setting the 9E312-12 Module DIP Switch See the Cautions at the end of this table. T able 2-2. Function of DIP Switch Switch Function Description 8 Clear Password -1 This module stores user enter ed passwords in NVRAM (Nonvolatile random access memory). T o clear these passwords, toggle this switch and then reset the module’s pr ocessor . Once ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 19

    3-1 Chapter 3 Operation The 9E312-12 module is a thirteen port device; twelve front panel ports, each repr esents a separate Ethernet collision domain and one port connected to INB1. As shown in Figure 3-1, Ethernet Network Interface Blocks (ENIBs) convert data packets received fr om any front panel port into a canonical frame format befor e forwar ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 20

    Operation 3-2 ENIB The Ethernet Network Interface Block (ENIB) converts Ethernet data packets received thr ough front panel ports into a common canonical format that allows the Fast Packet Switching Engine to determine the proper destination port. The ENIB also converts data packets from the common canonical format back to Ethernet data packets for ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 21

    3-3 INB NIB INB NIB Each module that attaches to the Internal Network Bus (INB ) has an INB Network Interface Block (NIB). The INB NIB converts canonical frames to fixed length data blocks for transmission onto the INB. For data blocks received fr om the INB, the INB NIB reassembles the data blocks r eceived from the INB back into canonical frames ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 22

    Operation 3-4 and control the SMB LANVIEW diagnostic LEDs. Although the system diagnostic controller and the main host pr ocessor can operate independently of each other if needed, they exchange information about each others status and overall module condition. The information gathered by the diagnostic contr oller is available to the network manag ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 23

    4-1 Chapter 4 LANVIEW LEDs The front panel LANVIEW LEDs indicate the status of the module and may be used as an aid in trouble shooting. Shown in Figur e 4-1 are the LANVIEW LEDs of the 9E312-12 module. Figure 4-1. The LANVIEW LEDs INB T ransmit INB Receiv e Po r t Receiv e 1 2 3 4 5 6 7 8 9 10 11 12 1 Po r t T ransmit System Status ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 24

    LANVIEW LEDs 4-2 The function of the two System Status LEDs, System Management Bus (SMB) and CPU (Central Processing Unit), ar e listed in T able 4-1. The function of the INB Receive LEDs are listed in T able 4-3 T able 4-1. System Status (SMB and CPU) LEDs LED Color State Description Green Functional Fully operational. Y ellow T esting Normal, int ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 25

    4-3 LANVIEW LEDs The function of the INB T ransmit LEDs are listed in T able 4-3. The function of the Port Receive LEDs are listed in T able 4-4. T able 4-3. INB Transmit LEDs LED Color State Green (Flashing) Activity , port enabled (Flashing to steady on indicates rate.) Y ellow (Flashing) Port in standby state Red Port disabled Red (Flashing) F A ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 26

    LANVIEW LEDs 4-4 The function of the Port T ransmit LEDs are listed in T able 4-3. T able 4-5. P ort Transmit LEDs LED Color State Green (Flashing) Activity , port enabled (Flashing to steady on indicates rate.) Y ellow (Flashing) Port in standby state Red (Flashing) Error (collision) (Flashing to steady on indicates rate.) Off No activity , port e ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 27

    5-1 Chapter 5 Specifications T echnical Specifications CPU: Intel i960 RISC based micropr ocessor Memory: 4 Meg. Local RAM (expandable to 12 Meg.) 2 Meg. Flash Memory (expandable to 16 Meg.) 2 Meg. Packet RAM Standar ds: IEEE 802.1D IEEE 802.3i 10 Base-T Netw ork Interfaces: RJ-45 Connectors ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 28

    Specifications 5-2 Safety This equipment meets: The safety requir ements of: • UL 1950 • CSA C22.2 No. 950 • EN 60950 • IEC 950 The EMI requir ements of: • FCC Part 15 Class A • EN 55022 Class A • VCCI Class I The EMC requir ements of: • EN 50082-1 • IEC 801-2 ESD • IEC 801-3 Radiated susceptibility • IEC 801-4 EFT Service MT ...

  • Cabletron Systems MMAC-Plus 9E312-12 - page 29

    5-3 Ph ysical En vir onment: Operating T emperature 5 to 40 ° C Storage T emperature -30 to 90 ° C Relative Humidity 5% to 95% non-condensing ...

メーカー Cabletron Systems カテゴリー Switch

Cabletron Systems MMAC-Plus 9E312-12のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- MMAC-Plus 9E312-12の取扱説明書
- Cabletron Systemsの製品カード
- パンフレット
- またはCabletron Systems MMAC-Plus 9E312-12の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cabletron Systems MMAC-Plus 9E312-12の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cabletron Systems MMAC-Plus 9E312-12の取り付け説明書、サービスマニュアル、簡易説明書、またはCabletron Systems MMAC-Plus 9E312-12のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cabletron Systems MMAC-Plus 9E312-12の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cabletron Systems MMAC-Plus 9E312-12デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCabletron Systems MMAC-Plus 9E312-12を使用するのを助ける技術的文書のことです。説明書は通常、全てのCabletron Systems MMAC-Plus 9E312-12ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cabletron Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cabletron Systems MMAC-Plus 9E312-12の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCabletron Systems MMAC-Plus 9E312-12の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cabletron Systems MMAC-Plus 9E312-12に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cabletron Systems MMAC-Plus 9E312-12デバイスの基本機能を使うにあたってのヒント。 Cabletron Systems MMAC-Plus 9E312-12のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cabletron Systems MMAC-Plus 9E312-12に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCabletron Systems MMAC-Plus 9E312-12のメーカー/サービスへの連絡先に関する情報。

Cabletron Systems MMAC-Plus 9E312-12についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもCabletron Systems MMAC-Plus 9E312-12の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCabletron Systems MMAC-Plus 9E312-12で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)