Hitachi 232437の取扱説明書

20ページ 0.44 mb
ダウンロード

ページに移動 of 20

Summary
  • Hitachi 232437 - page 1

    Instructions – Parts List GRACO INC. P .O. BOX 1441 MINNEAPOLIS, MN 55440–1441 Copyright 1999, Graco Inc. is registered to I.S. EN ISO 9001 Pail Mount Airless Packages 308765F Model 232437 Shown 8109C 0359 II 1/2 G T3 ITS03A TEX1 1251 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See p ...

  • Hitachi 232437 - page 2

    2 308765 T able of Contents List of Models 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W arnings 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operation 10 . . . . . . . . . . . . . . . . . . . . . . . ...

  • Hitachi 232437 - page 3

    308765 3 Symbols W arning Symbol W ARNING This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions. W ARNING INSTRUCTIONS EQUIPMENT MISUSE HAZARD Equipment ...

  • Hitachi 232437 - page 4

    4 308765 W ARNING SKIN INJECTION HAZARD Spray from the gun, hose leaks, or ruptured components can inject fluid into your body and cause extremely serious injury , including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury . D Fluid injected into the skin might look like just a cut, but it is a seriou ...

  • Hitachi 232437 - page 5

    308765 5 W ARNING FIRE AND EXPLOSION HAZARD Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury . D Ground the equipment and the object being sprayed. Refer to Grounding on page 7. D If there is any static sparking or you feel an electric shock while using ...

  • Hitachi 232437 - page 6

    6 308765 Setup General Information NOTE: Reference numbers and letters in parentheses in the text refer to the callouts in the figures and the parts drawing. NOTE: Always use Genuine Graco Parts and Acces- sories, available from your Graco distributor . Refer to Product Data Sheet 305900. If you supply your own accessories, be sure they are adequat ...

  • Hitachi 232437 - page 7

    308765 7 Setup Grounding W ARNING FIRE AND EXPLOSION HAZARD Before operating the pump, ground the system as explained below . Also read the section FIRE AND EXPLOSION HAZARD on page 5. 1. Pump: use the ground wire and clamp (supplied). See Fig. 1. Loosen the grounding lug locknut (W) and washer (X). Insert one end of the ground wire (18) into the s ...

  • Hitachi 232437 - page 8

    8 308765 Setup Supplied Components Refer to Fig. 2. W ARNING A red-handled bleed-type master air valve (E) and a fluid drain valve (F) are supplied. These compo- nents help reduce the risk of serious injury , includ- ing fluid injection and splashing of fluid in the eyes or on the skin, and injury from moving parts if you are adjusting or repairing ...

  • Hitachi 232437 - page 9

    308765 9 Setup 8108C KEY SUPPLIED COMPONENTS 1 5 Gallon (19 liter) Pail Cover 2 Pump 13 Fluid Filter (includes fluid drain valve F) 15 Air Relief V a lve 18 Pump Ground Wire (required; see page 7 for installation instructions) 19 5 Gallon (19 liter) Pail 39 Agitator 40 Agitator Ground Wire 101 Electrically Conductive Fluid Hose 103 Fluid Whip Hose ...

  • Hitachi 232437 - page 10

    10 308765 Operation Pressure Relief Procedure W ARNING SKIN INJECTION HAZARD The system pressure must be manually relieved to prevent the system from starting or spraying accidentally . Fluid under high pressure can be injected through the skin and cause serious injury . T o reduce the risk of an injury from injection, splashing fluid, or moving pa ...

  • Hitachi 232437 - page 11

    308765 1 1 Operation Prime the Pump 1. See Fig. 3. Remove the tip guard and spray tip from the gun (106). Refer to the gun manual. 2. Close the pump air regulator (G), and bleed-type air valves (B, E). 3. Connect the air line (A) to the air inlet swivel (H). 4. Check that all fittings throughout the system are tightened securely . 5. Fill the pail ...

  • Hitachi 232437 - page 12

    12 308765 Operation Adjust the Spray Pattern 1. Start the pump. Use the pump air regulator (G) to adjust the pump speed and fluid pressure until the spray is completely atomized. Use the lowest pressure necessary to get the desired results. Higher pressure may not improve the spray pattern and will cause premature tip and pump wear . See Fig. 3. W ...

  • Hitachi 232437 - page 13

    308765 13 Operation Fig. 3 KEY 1 5 Gallon (19 liter) Pail Cover 2 Pump 13 Fluid Filter (includes fluid drain valve F) 19 5 Gallon (19 liter) Pail 20 Screw Knobs 39 Agitator 41 Agitator Air Supply T ub e 101 Electrically Conductive Fluid Hose 103 Fluid Whip Hose 104 Gun Filter/Swivel 106 Airless Spray Gun A Electrically Conductive Air Supply Hose B ...

  • Hitachi 232437 - page 14

    14 308765 Maintenance Preventive Maintenance Schedule The operating conditions of your particular system determine how often maintenance is required. Estab- lish a preventive maintenance schedule by recording when and what kind of maintenance is needed, and then determine a regular schedule for checking your system. Clean the In-Line Fluid Filter E ...

  • Hitachi 232437 - page 15

    308765 15 Parts Part No. 232433, Series A, 23:1 Monark, cst, without agitator , with hose and gun Part No. 232434, Series A, 23:1 Monark, cst, without agitator , hose, and gun Part No. 232437, Series A, 23:1 Monark, cst, with agitator , hose, and gun (shown) Part No. 232445, Series A, 23:1 Monark, sst, without agitator , with hose and gun Part No. ...

  • Hitachi 232437 - page 16

    16 308765 Parts Part No. 232433, Series A, 23:1 Monark, cst, without agitator , with hose and gun Part No. 232434, Series A, 23:1 Monark, cst, without agitator , hose, and gun Part No. 232437, Series A, 23:1 Monark, cst, with agitator , hose, and gun (shown) Part No. 232445, Series A, 23:1 Monark, sst, without agitator , with hose and gun Part No. ...

  • Hitachi 232437 - page 17

    308765 17 Parts Part No. 232437, Series A, 23:1 Monark, carbon steel (shown) 8107B 13 18 5 14 12 1 8 3 11 4 2 101 102 103 104 106 6 7 7 (Ref) 9 10 15 16 17 17 (Ref) 19 20 21 22 23, 25 24 30 31 39 40 40 (Ref) 41 41 (Ref) 42 A A 8107C B B C C D E E D ...

  • Hitachi 232437 - page 18

    18 308765 T echnical Data Category Data Maximum fluid working pressure 2300 psi (16 MPa, 160 bar) Maximum air input pressure 100 psi (0.7 MPa, 7 bar) Ratio 23:1 Maximum operating temperature 120 _ F (50 _ C) Wetted parts Pump: See pump manual 307619 Spray Gun: See gun manual 31 1254 Fluid Filter: See filter manual 307273 Agitator: See agitator manu ...

  • Hitachi 232437 - page 19

    308765 19 Dimensions 81 10A B A Model 232437 Shown (hose and gun not shown) A (height) B (diameter of pail) Weight 32 in. (813 mm) 10.625 in. (270 mm) 47 lb (21 kg) ...

  • Hitachi 232437 - page 20

    20 308765 Graco Standard W arranty Graco w arrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco w ill, for a period of twelve months from th ...

メーカー Hitachi カテゴリー Water Pump

Hitachi 232437のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 232437の取扱説明書
- Hitachiの製品カード
- パンフレット
- またはHitachi 232437の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Hitachi 232437の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Hitachi 232437の取り付け説明書、サービスマニュアル、簡易説明書、またはHitachi 232437のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Hitachi 232437の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Hitachi 232437デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがHitachi 232437を使用するのを助ける技術的文書のことです。説明書は通常、全てのHitachi 232437ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Hitachiの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Hitachi 232437の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははHitachi 232437の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Hitachi 232437に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Hitachi 232437デバイスの基本機能を使うにあたってのヒント。 Hitachi 232437のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Hitachi 232437に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるHitachi 232437のメーカー/サービスへの連絡先に関する情報。

Hitachi 232437についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもHitachi 232437の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがHitachi 232437で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)