Miele 371 Gの取扱説明書

32ページ 1.01 mb
ダウンロード

ページに移動 of 32

Summary
  • Miele 371 G - page 1

    Installation instructions Gas hobs K M3 7 0G/K M 370-1 G KM 371 G K M3 9 0G/K M3 9 1G To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 05 827 720 e n-G B ...

  • Miele 371 G - page 2

    G This appliance can be used in countries other than those specified on the appliance. It is, however, set up for connection to the gas and electricity supplies in the countries specified. For use in other countries please contact the Miele spare parts or customer service department in your country. D Das Gerät ist auch für den Gebrauch in andere ...

  • Miele 371 G - page 3

    Gas-heated appliances Safety precautions to take if you smell gas ß Turn off the gas emergency control valve immediately. This is usually located near the gas meter. ß Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches. ß Do not operate electrical lights or switches, i.e. do not switch them &quo ...

  • Miele 371 G - page 4

    Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Appliance dimensions and worktop cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 K M3 7 0 ...........................................................7 KM 370-1 G .................................................. ...

  • Miele 371 G - page 5

    Building in Fit wall units and extractor hood before fitting the hob, to avoid damaging the appliance. ~ The veneer or laminate coating of worktops (or adjacent kitchen units) must be treated with 100 °C heat-resistant adhesive which will not dissolve or distort. Any backmoulds must be of heat-resistant material. ~ Ideally the gas hob should be in ...

  • Miele 371 G - page 6

    ~ The room in which the gas hob is installed must be at least 20 m 3 in size with a door or window in it which can be opened to the outside air. ~ Using the gas hob will cause a build-up of heat and moisture in the room in which it is installed. Ensure that the room has sufficient natural or mechanical means of ventilation, e.g. an extractor. ~ If ...

  • Miele 371 G - page 7

    KM 370 a Building-in depth b Mains connection box c Gas connection R 1 / 2 - ISO 7-1 (DIN2999) Appliance dimensions and worktop cut-out 7 ...

  • Miele 371 G - page 8

    KM 370-1 G a Building-in depth b Mains connection box c Gas connection R 1 / 2 - ISO 7-1 (DIN2999) Appliance dimensions and worktop cut-out 8 ...

  • Miele 371 G - page 9

    KM 371 a Building-in depth b Mains connection box c Gas connection R 1 / 2 - ISO 7-1 (DIN2999) Appliance dimensions and worktop cut-out 9 ...

  • Miele 371 G - page 10

    KM 390 a Building-in depth b Mains connection box c Gas connection R 1 / 2 - ISO 7-1 (DIN2999) Appliance dimensions and worktop cut-out 10 ...

  • Miele 371 G - page 11

    KM 391 a Building-in depth b Mains connection box c Gas connection R 1 / 2 - ISO 7-1 (DIN2999) Appliance dimensions and worktop cut-out 11 ...

  • Miele 371 G - page 12

    ^ Prepare the worktop cut-out as shown in the diagram. Remember to maintain a minimum safety distance of 50 mm between the hob and the back wall and 150 mm between it and a side wall or tall unit to the right or left of the hob. (See "Warning and Safety instructions"). ^ Seal the cut surfaces with a suitable heat-resistant sealant to avoi ...

  • Miele 371 G - page 13

    Building in the appliance ^ Feed the electricity connection cable through the cut-out and connect. ^ Place the gas hob in the prepared cut-out. ^ Make the gas connection (see relevant section). Securing the appliance KM 371 G / KM 391 G ^ Secure the gas hob at the front and rear with fixing brackets a supplied as shown. KM 370 G / KM 370-1 G / KM 3 ...

  • Miele 371 G - page 14

    Do not let sealant get in between the hob frame and the worktop. This could cause difficulties if the hob ever needs to be taken out for servicing and possibly result in damage to the hob frame or the worktop. The sealing strip under the edge of the top part of the hob provides a sufficient seal for the worktop. Installation 14 ...

  • Miele 371 G - page 15

    All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current local and national safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplie ...

  • Miele 371 G - page 16

    Important The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system, which complies with current local and national safety regulations. It is most important that this basic safety requirement is present and regularly tested and where there is any doubt, the electrical wiri ...

  • Miele 371 G - page 17

    Connection to the gas supply, or conversion from one type of gas to another should only be undertaken by an approved and registered gas installer in strict accordance with local and national safety and building regulations, (e.g. Corgi registered in the U.K.) Every appliance should have its own isolating valve and test point. Check with your local ...

  • Miele 371 G - page 18

    a Connection with test point specifically for GB b Connection with test point specifically for GB and 90° angle Natural gas / liquid gas ^ The appliance is supplied with an R 1/2" - ISO 7-1 (DIN 2999) gas connection point. ^ An appropriate rigid connection and isolating valve must be installed for final connection. ^ The gas connection must b ...

  • Miele 371 G - page 19

    Nominal rating for all gas types with the burner full on Burner Gas type KM 370 G / KM 370-1 G / KM 371 G KM 390 G / KM 391 G kW g/h kW g/h Small burner Natural gas H Liquid gas 1.00 1.00 - 73 1.00 1.00 - 73 Normal burner Natural gas H Liquid gas 1.75 1.75 - 127 1.75 1.75 - 127 Large burner Natural gas H Liquid gas 3.00 3.00 - 218 3.00 3.00 - 218 W ...

  • Miele 371 G - page 20

    KM 370 G / KM 370-1 G / KM 371 G When converting to anothe type of gas, the main jets and the small jets on all burners have to be changed. Screw in the new jets according to the following table. For U.K. and IE Main jet Ø Small jet Ø Natural gas H Small burner Medium burner Large burner Wok 0.76 1.00 1.29 1.29 / 0.63 0.39 0.42 0.54 0.80 Liquid g ...

  • Miele 371 G - page 21

    Changing the jets Disconnect the gas hob from the electricity supply by switching off at the socket and withdrawing the plug or by removing the mains fuse. Changing the main jets Small, medium and large burners ^ Take off the pan support, burner cap b and the burner head d . ^ Using an M7 socket spanner unscrew the main jet e . ^ Change the main je ...

  • Miele 371 G - page 22

    Wok burner ^ Take off the burner cap a , burner ring b and burner head c . ^ Loosen screws d and remove the cover plate. ^ Using an M7 socket spanner unscrew the main jets e (larger diameter jet) and f (smaller diameter jet). ^ Change the main jets. Conversion to another type of gas 22 ...

  • Miele 371 G - page 23

    Changing the small jets (for all burners) To change the small jets, the burner securing screws must first be loosened and the upper section of the appliance removed. ^ Remove the operating controls by pulling them upwards. ^ Remove the upper section. N.B. To remove a ceramic upper section: Insert the lever supplied between the frame and the worktop ...

  • Miele 371 G - page 24

    After changing the jets ^ Assemble the removed burner parts in reverse order and check for leaks by operating the burner without the upper section of the hob in place (use a match to ignite the flame). ^ Remove the burner parts again. ^ Then replace the upper section of the hob. ^ Screw in the burner bases and re-assemble the burner parts, making s ...

  • Miele 371 G - page 25

    KM 390 G / KM 391 G When converting to another type of gas, the main jets and the small jets on all burner have to be changed. Screw in the new jets according to the following table. For U.K. and IE Main jet Ø Small jet Ø Natural gas H Small burner Medium burner Large burner Wok 0.76 1.00 1.29 1.40 / 0.68 0.39 0.42 0.54 0.88 / 0.42 Liquid gas Sma ...

  • Miele 371 G - page 26

    Changing the jets Disconnect the gas hob from the electricity supply by switching off at the socket and withdrawing the plug or by removing the mains fuse. Changing the main jets Small, medium and large burners ^ Take off the pan support, burner cap b and the burner head d . ^ Using an M7 socket spanner unscrew the main jet e . ^ Change the main je ...

  • Miele 371 G - page 27

    Wok burner ^ Take off the burner cap a , burner ring b and the burner head c . ^ Loosen screws d and remove the cover plate. ^ Using an M7 socket spanner unscrew the main jets e (larger diameter) and f (smaller diameter). ^ Change the main jets. Conversion to another type of gas 27 ...

  • Miele 371 G - page 28

    Changing the small jets To change the small jets, the burner securing screws must first be loosened and the upper section of the appliance removed. ^ Remove the operating controls by pulling them upwards. ^ Remove the upper section. N.B. To remove a ceramic upper section: Insert the lever supplied between the frame and the worktop, prise up the upp ...

  • Miele 371 G - page 29

    Wok burner b Small jet with smaller diameter (e.g. for liquid gas: 0.20). c Small jet with larger diameter (e.g. for liquid gas: 0.46). ^ Remove the ignitor a . ^ Using a small screwdriver, unscrew the small jets b and c in the gas fitting. ^ Pull the jets out with a pair of pointed pliers. ^ Select the jets as shown in the table, fit, reversing th ...

  • Miele 371 G - page 30

    After changing the jets ^ Assemble the removed burner parts in reverse order and check for leaks by operating the burner without the upper section of the hob in place (use a match to ignite the flame). ^ Remove the burner parts again. ^ Then replace the upper section of the hob. ^ Screw in the burner bases and re-assemble the burner parts, making s ...

  • Miele 371 G - page 31

    31 ...

  • Miele 371 G - page 32

    Alteration rights reserved / 3209 M.-Nr. 05 827 720 / 10 ...

メーカー Miele カテゴリー Cooktop

Miele 371 Gのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- 371 Gの取扱説明書
- Mieleの製品カード
- パンフレット
- またはMiele 371 Gの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Miele 371 Gの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Miele 371 Gの取り付け説明書、サービスマニュアル、簡易説明書、またはMiele 371 Gのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Miele 371 Gの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Miele 371 Gデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがMiele 371 Gを使用するのを助ける技術的文書のことです。説明書は通常、全てのMiele 371 Gユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Mieleの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Miele 371 Gの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははMiele 371 Gの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Miele 371 Gに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Miele 371 Gデバイスの基本機能を使うにあたってのヒント。 Miele 371 Gのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Miele 371 Gに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるMiele 371 Gのメーカー/サービスへの連絡先に関する情報。

Miele 371 Gについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもMiele 371 Gの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがMiele 371 Gで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)