日本語 dropdown-ico

SRS Labs WL66の取扱説明書

28ページ 0.97 mb
ダウンロード

ページに移動 of 28

Summary
  • SRS Labs WL66 - page 1

    WL66 Series Owner's manual Manuel de l'utilisateur Bedienungsanleitung Manual del usario Manual d'uso per l'utente Manual do proprietário Gebruikershandleiding TOSHIBA g ...

  • SRS Labs WL66 - page 2

    English 2 Contents SETTING UP Safety precautions – Some do’s and don ’ts for you to be aware of 3 Installation and important information 4 The remote control – an at-a-glance guide 5 Connecting external equipment – a guide to connecting external equipment to the back of the television 6 Connecting a computer – connecting a computer to t ...

  • SRS Labs WL66 - page 3

    English 3 Safety P recautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety . They are of a general nature, intended to help with all electronic c ...

  • SRS Labs WL66 - page 4

    English 4 Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place on a sturdy platform, the mounting surface should be flat and steady . It should then be secured to the wall with a sturdy tie usi ...

  • SRS Labs WL66 - page 5

    English 5 Simple at-a-glance reference of your remote control. T ext control buttons T o display on-screen information Stereo/bilingual transmissions T o exit Menus No function on this model T o mute the sound T o select input from external sources T o select mode No function on this model On-screen Menus Widescreen viewing Selectable picture prefe ...

  • SRS Labs WL66 - page 6

    English 6 6 Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. HDMI™ (High-Definition Multimedia Interface) is for use with a DVD , decoder or electrical equipment with digital audio and video output. It is designed for best pe ...

  • SRS Labs WL66 - page 7

    English 7 Connecting a computer Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. When PC input mode is selected some of the television ’s features will be unavailable e.g. Manual setting in the SET UP menu, Colour , Tint , DNR and Black Stretch in the Pic ...

  • SRS Labs WL66 - page 8

    English 8 Controls and input connections If the RED LED is unlit check that the mains plug is connected to the power supply . If the picture does not appear press i on the remote control, it may take a few moments. T o put the television into Standby press i on the remote control. T o view the television press i again. The picture may take a few se ...

  • SRS Labs WL66 - page 9

    English 9 2 3 5 4 Using left or right select your language , then press OK . Then press left or right to select your country and press OK . Y our System will have been selected, if there is a choice, press right to select from the systems displayed. T o start Auto tuning press OK . B/G – Continental Europe, I – UK D/K – Eastern Europe, L – ...

  • SRS Labs WL66 - page 10

    English 10 Manual tuning Prog. Channel Station 0 C60 1 C22 BBC1 2 C28 BBC2 3 C25 ITV 4 C32 CH4 5 C69 OK Se lect Sor t MENU Back EXIT Watch TV 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV 4 Press right to select System and use up or down to change ( if required, ...

  • SRS Labs WL66 - page 11

    This television has direct channel entry if the channel numbers are known. Select the Manual tuning screen in Step 3 . Enter the Programme number , the System , then C for standard (terrestrial) channels or S for cable channels and the Channel number . Press OK to store. P LEASE N OTE English 11 Manual tuning Prog. Channel Station 0 C60 VCR 1 C22 B ...

  • SRS Labs WL66 - page 12

    English 12 Y ou must allow the television to complete the search. When the search is complete the television will automatically select programme position 1. This may not be a clear picture, so the station order can be changed using Manual tuning , see page 9 . B/G – Continental Europe, I – UK D/K – Eastern Europe, L – France 5 Y our System ...

  • SRS Labs WL66 - page 13

    English 13 Sound controls continued, SRS WOW™ sound effects, dual, stable sound ® SRS WOW ™ sound effects SRS WOW™ is a suite of audio effects which use the stereo signals being broadcast to produce enhanced sound from the television ’s speakers. If mono sound is broadcast only T ruBass will be available. SRS 3D gives a rich sound experien ...

  • SRS Labs WL66 - page 14

    English 14 Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the { button repeatedly to select between Exact Scan , Wide , Super Live 2 , Cinema 2 , 4:3 , Super Live 1 , Cinema 1 , Subtitle and 14:9 . Please note: Whenever the MENU button is pressed the picture size setti ...

  • SRS Labs WL66 - page 15

    Use this setting when watching a 1080i source, it will display the image as transmitted without scaling or cropping the picture. EXACT SCAN This option is only available when watching a 1080i source. ☛ 42 MODEL ONL Y English 15 Widescreen viewing continued Using the special functions to change the size of the displayed image (i.e. changing the he ...

  • SRS Labs WL66 - page 16

    English 16 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV PICTURE Picture settings OK 3D Colour management Off Base colour adjustment Cinema mode Off MENU Back EXIT Watch TV Picture controls T o return to the original factory settings select Reset in the Picture ...

  • SRS Labs WL66 - page 17

    English 17 Picture controls continued DNR enables you to ‘soften’ the screen representation of a weak signal to reduce the noise effect. DNR – Digital Noise Reduction Select DNR from the Picture settings menu. Use left or right to adjust. The differences may not always be noticeable (for the best result use lower settings as picture quality c ...

  • SRS Labs WL66 - page 18

    English 18 Base colour adjustment Hue Saturation Brightness Red +2 +6 +4 Green 0 0 0 Blue 0 0 0 Y ellow 0 0 0 Magenta 0 0 0 Cyan 0 0 0 Reset OK MENU Back EXIT Watch TV Picture controls continued In the Picture settings menu press down until Colour T emperature is highlighted. Press left or right to select between Normal , W arm and Cool to suit you ...

  • SRS Labs WL66 - page 19

    English 19 PICTURE Picture settings OK 3D Colour management Off Base colour adjustment Cinema mode On MENU Back EXIT Watch TV FUNCTION T eletext Auto. Panel lock Off Auto format On Blue screen On Side Panel 1 MENU Back EXIT Watch TV The Side Panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format. This helps pr ...

  • SRS Labs WL66 - page 20

    English 20 P anel lock, time display , stereo/bilingual transmissions, the timer From the FUNCTION menu select P anel lock and choose On or Off using left or right . Panel lock disables the buttons on the television. All buttons on the remote control can still be used. P anel lock 1 When Panel lock is On , a reminder will appear when the buttons on ...

  • SRS Labs WL66 - page 21

    English 21 PC settings – picture position, clock phase, sampling clock, reset 3 3 Use left or right to adjust until the picture clears. In the SET UP menu press down until PC Setting is highlighted. Press OK to select, then down to highlight Clock phase . Use left or right to adjust until the picture clears. 1 2 The Clock phase matches the PC sig ...

  • SRS Labs WL66 - page 22

    English 22 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV Input selection and A V connections Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6 for a clear view of the back connection recommendations. Most med ...

  • SRS Labs WL66 - page 23

    English 23 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV 1/2 SE T U P Language English Country UK Auto tuning OK Manual tuning OK AV connection OK Picture position OK MENU Back EXIT Watch TV HDMI audio If the connected HDMI source does not support digital audio, ...

  • SRS Labs WL66 - page 24

    English 24 The 6 / / 7 button : T o view text services press 6 / / 7 . Press again to superimpose the text over a normal broadcast picture and again to return to normal viewing. P rogrammes cannot be changed until text is cancelled. The first text page shown will be the initial page. Any text page can be accessed by entering the 3 digit page number ...

  • SRS Labs WL66 - page 25

    English 25 For use with P f and P e to view sub -pages when available. T o access sub-pages: X Press 6 / / 7 to display text. Press again to superimpose text over a normal broadcast picture. Press again to return to normal television viewing . Programmes cannot be changed until this has been done. T o display a page of text: 6 / / 7 Press T to acce ...

  • SRS Labs WL66 - page 26

    English 26 A Remove it by pressing . Why is there a message permanently on the screen? Q i + Below are the answers to some of the most common queries. For more information go to www .toshiba.co.uk A Check the mains switch is on and check all mains connections. Check the television is not in standby mode. Why is there no sound or picture? Q A Check ...

  • SRS Labs WL66 - page 27

    English 27 Q uestions and A nswers continued A Good performance of text depends on a good strong broadcast signal. This normally requires a roof or loft aerial. If the text is unreadable or garbled, check the aerial. Go to the main index page of the text service and look for the User Guide . This will explain the basic operation of text in some det ...

  • SRS Labs WL66 - page 28

    English 28 Broadcast systems/channels P AL-I UHF UK21-UK69 P AL-B/G UHF E21-E69 VHF E2-E12, S1-S41 SECAM-L UHF F21-F69 VHF F1-F10, B- Q SECAM-D/K UHF R21-R69 VHF R1-R12 Video Input P AL, SECAM, NTSC 3.58/4.43 External connections EXT1 Input 21-pin SCART RGB, A/V EXT2 Input 21-pin SCART A/V , S -video EXT3 Input Phono jacks Y , P B /C B , P R /C R P ...

メーカー SRS Labs カテゴリー Universal Remote

SRS Labs WL66のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- WL66の取扱説明書
- SRS Labsの製品カード
- パンフレット
- またはSRS Labs WL66の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、SRS Labs WL66の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、SRS Labs WL66の取り付け説明書、サービスマニュアル、簡易説明書、またはSRS Labs WL66のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、SRS Labs WL66の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

SRS Labs WL66デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSRS Labs WL66を使用するのを助ける技術的文書のことです。説明書は通常、全てのSRS Labs WL66ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

SRS Labsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. SRS Labs WL66の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSRS Labs WL66の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。SRS Labs WL66に関してこのドキュメントで見つけることができる全てのヒントの目次
3. SRS Labs WL66デバイスの基本機能を使うにあたってのヒント。 SRS Labs WL66のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。SRS Labs WL66に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSRS Labs WL66のメーカー/サービスへの連絡先に関する情報。

SRS Labs WL66についてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもSRS Labs WL66の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSRS Labs WL66で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)