-
Abocom EFM560 - page 1
External Fax Modem 56K User Guide M73-APO02-210 ...
-
Abocom EFM560 - page 2
HARDWARE INSTALLATION To install the External Fax Modem 56K card perform the following steps: 1. Turn off your computer. Make sure the power switch of your External Fax Modem 56K is also set to off. 2. Connect the RS-232 cable to your External Fax Modem 56K with one end to the RS-232 port on the rear panel of the External Fax Modem 56K and the othe ...
-
Abocom EFM560 - page 3
5. Connect the telephone line to the RJ-11 Line port, connect the other end of the line into a telephone jack in your wall. Note: Use only the power adapter provided with this unit. Using any incorrect power adapters will cause permanent and unpredictable damage to this External Fax Modem 56K. - 2 - ...
-
Abocom EFM560 - page 4
SOFTWARE INSTALLATION Windows 95/98 1. Be sure the External Fax Modem 56K is well connected to your computer. Turn on your computer and start Windows. 2. Windows will automatically detect the new hardware device. Click Next to continue. 3. Load the External Fax Modem 56K floppy disk or compact disc into your computer. When Windows prompts you What ...
-
Abocom EFM560 - page 5
3. Modem icon should be found if Windows 2000 detects the modem. If not, go to Start Æ Settings Æ Control Panel Æ Phone and Modem Options. 4. Click the Modem tab and press the Add button to add it in. 5. Click Next to set up the modem. 6. Click Finish. 7. Go back to your desktop, and click Start Æ Settings Æ Control Panel Æ System Æ Hardware ...
-
Abocom EFM560 - page 6
9. Click the Driver tab and press the Update Driver button. 10.When the Upgrade Device Driver Wizard window appears, click Next. - 5 - ...
-
Abocom EFM560 - page 7
11.Select Display a list of the known drivers for this device so that I can choose a specific driver and click Next. 12.Highlight Lucent Venus Modem PnP and click the Have Disk button. 13.Load the floppy disk or compact disc whichever contains the device driver and type the drive path. Click OK. - 6 - ...
-
Abocom EFM560 - page 8
14.Click Next. 15.Click Next. 16.Click Yes. - 7 - ...
-
Abocom EFM560 - page 9
17.Click Finish . 18.When back to the External Fax Modem 56K Properties window, click Close to complete the driver updating. 19.To verify if the device is well installed in your system and enabled, go to the Device Manager window. The External Fax Modem 56K should be found on the list. If not, contact your dealer for technical support. - 8 - ...
-
Abocom EFM560 - page 10
Installation for Windows Millennium 1. Be sure the External Fax Modem 56K is well connected to your computer. Turn on your system and start Windows Millennium. 2. Go to Start Æ Settings Æ Control Panel Æ System Æ Device Manager. 3. Modem icon should be found if Windows Millennium detects the modem. If not, go to Start Æ Settings Æ Control Pan ...
-
Abocom EFM560 - page 11
5. Click Next to set up the modem. 6. Click Finish. 7. Go back to your desktop, and click Start Æ Settings Æ Control Panel Æ System Æ Device Manager. 8. Click Modem to expand. Highlight Lucent Venus Modem PnP and select Properties . - 10 - ...
-
Abocom EFM560 - page 12
9. Click the Driver tab and press the Update Driver button. 10. Select Specify the location of the driver (Advanced) and click Next. - 11 - ...
-
Abocom EFM560 - page 13
11. Select Display a list of all the drivers in a specific location, so you can select the driver you want and click Next. 12. Highlight Lucent Venus Modem PnP [6-8-2000] and press the Have Disk button. - 12 - ...
-
Abocom EFM560 - page 14
13. Load the floppy disk or compact disc whichever contains the device driver and type the drive path. Click OK. 14. Click Next. 15. Click Next. - 13 - ...
-
Abocom EFM560 - page 15
16. Click Finish. 17. When back to the External Fax Modem 56K Properties window, click Close to complete the driver updating. 18. To verify if the device is well installed in your system and enabled, go to the Device Manager window. The External Fax Modem 56K should be found on the list. If not, contact your dealer for technical support. - 14 - ...
-
Abocom EFM560 - page 16
Windows NT 1. Go to My Computer Æ Control Panel . Double-click Modem . Click the Add… button. Click Next . 2. Follow the on-screen instruction to proceed. When the following dialog box appears, select Change... - 15 - ...
-
Abocom EFM560 - page 17
3. Select Have Disk… from the ‘‘ Install New Modem ’ ’ window. And make sure the External Fax Modem 56K floppy disk or Compact Disc is loaded into your computer. 4. Direct to your floppy disk drive or CD-ROM drive and select EXTERNAL.INF . Follow the on- screen instruction to proceed. - 16 - ...
-
Abocom EFM560 - page 18
5. Press Next to continue. 6. Click Finish to complete the installation. - 17 - ...
Abocom EFM560についてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもAbocom EFM560の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがAbocom EFM560で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。