Perle Systems c-1111-xxxxxの取扱説明書

19ページ 0.13 mb
ダウンロード

ページに移動 of 19

Summary
  • Perle Systems c-1111-xxxxx - page 1

    P/N 55 00308-20 Perle 10/100/1 000 Ethernet Media Con verter Modul e Inst allation Guide C-1110-XX XXX Unmanaged M odu le CM-1110-X XXXX Man aged Module C-1110-SFP Unman aged M odule CM-1110-SF P M anaged M odule ...

  • Perle Systems c-1111-xxxxx - page 2

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 2 Over vie w This docum ent contains instructions n ecessar y for the ins tallation and operatio n of the Per le 10/100/1000 Media Co nverter Module(s) (C -1110 and C M-1110) t o be used in conjun ction with a Perle MCR c hassis. T he C-1110’s are unm anaged m edia converter m odule ...

  • Perle Systems c-1111-xxxxx - page 3

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 3 Model Connector (xx) Mode - Distance Wavele ngth C-1110-M2 xx 05 CM-1110-M2 xx 05 SC/ST/LC MM - 550 m/1804 ft. 850/850 nm C-1110-M2 xx 2 CM-1110-M2 xx 2 SC/ST/LC MM - 2 km/1.2 mi. 1310/1310 nm C-1110-S2 xx 10 CM-1110-S2 xx 10 SC/ST/LC SM - 10 km/6.2 mi. 1310/1310 nm C-1110-S1SC10U C ...

  • Perle Systems c-1111-xxxxx - page 4

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 4 Inst allation The m odule comes equi pped with a bank of DIP switches and jumpers for setting conf iguration. T he default dip switch s ettings (all switches U P) and d efault jum per settings wil l work for most installations . For inform ation on the m anagem ent optio ns of the C ...

  • Perle Systems c-1111-xxxxx - page 5

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 5 Auto-Con fig Jumper (CM-1 1 10 onl y) The Auto-Co nfig jum per (J5) is located j ust above the Auto- MDIX jumper ( see above). Ref er to the diagram below f or labelling. T his jumper onl y applies to CM- 1110 m odules. Strapping p ins 1 and 2 of the jum per will set the m odule in ...

  • Perle Systems c-1111-xxxxx - page 6

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 6 Auto Negotiation copp er (S witch 1) Switch Posit ion Mod e Up (defau lt) Auto Down Off Note: Auto ne gotiation s hould on ly be turned of f, if the copper link partner does n ot support Auto Negot iation and f ixed setti ngs are required b y the copper link partner. Auto : W hen en ...

  • Perle Systems c-1111-xxxxx - page 7

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 7 loss of copper link at th e near end device. T his would, i n effec t, resem ble a direct copper c onnection . Standard M ode : In this m ode, the links on th e fiber an d copper sides can be br ought u p and down inde pendentl y of each other. A loss of link on either th e fiber or ...

  • Perle Systems c-1111-xxxxx - page 8

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 8 The f ollowing diagram is an illustration of the operat ion of this feature. (A) – Rem ote Media Con verter setup f or Fiber Fau lt Alert En abled, Fiber Negot iation – OFF a nd Link Mode – Stand ard. (B) – Loca l Media Conv erter setup f or Fiber Faul t Alert -Enab led, Sma ...

  • Perle Systems c-1111-xxxxx - page 9

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 9 Speed copper (Switch 5) Switch Posit ion Mod e Up (defau lt) 100 Down 10 Note W hen Auto Negot iation (SW 1) is s et to Off, the Media Converter M odule will us e this s witch setting for its Ethernet copper spe ed setting. Up: T he Media Converter will be f ixed at 100 M bps. Dow n ...

  • Perle Systems c-1111-xxxxx - page 10

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 10 Loopback (Switch 7) Switch Posit ion Mod e Up (defau lt) Disabled Down Enabled Disabled: T his is the set ting for norm al operation. The switch must be set to this positio n in order for data to pass thr ough the Media Con verter Modul e. Enabled: T his is a test m ode. All da ta ...

  • Perle Systems c-1111-xxxxx - page 11

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 11 6. Tighten the ca ptive retai ner sc rew to ensure the Media Converter M odule is loc ked in place . 7. Rem ove the dust cap f rom the fiber c onnect or and con nect the fiber and copp er cables . Removing Media Co nverter Modules 1. Loosen the c aptive reta iner screw on th e fron ...

  • Perle Systems c-1111-xxxxx - page 12

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 12 Installing the Simplex Fiber Cable 1. Locate a 1000 Base-X c ompliant s implex (1 str and) fiber c able with appropr iate connector s. 2. Connect the fiber cable f rom the Media Converter M odule to the other Med ia Converter/ switch/f iber device. Installing the Copper Cable 1. Lo ...

  • Perle Systems c-1111-xxxxx - page 13

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 13 Operation Status LED The C(M) -1110 Modul e has six s tatus LEDs loca ted on the f ace plate of the m odule. PWR On – Power is on; mod ule is operating normal ly Blinking (slow ) – The module is in Loopback mode . Blinking (fast) – The m odule has a hardware failure . FDF (fi ...

  • Perle Systems c-1111-xxxxx - page 14

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 14 Other Fea tures Auto-MDIX Auto-MDIX ( autom atic medium -dependent int erface cross over) detects the s ignalling on the 10/100 /1000BA SE-T interf ace to determ ine the type of cable connecte d (straight-thr ough or crossover) and autom atically config ures the c onnection . Error ...

  • Perle Systems c-1111-xxxxx - page 15

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 15 T roubleshootin g General • Ens ure that the Media Con verter Modul e is secure ly seated in the chassis. • Ens ure both de vices on eit her end of the f iber are co m patible. If using a s implex f iber connection, e nsure that you have both an Upstream (U) and Downstream (D) ...

  • Perle Systems c-1111-xxxxx - page 16

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 16 T echnical Speci fications Power Input/Co nsum ption: 12V DC / 2.6 W Operating T emperatur e: 0 ° C to 50 ° C (32 ° F to 122 ° F ) Storage Tem perature: -25 ° C to 70 ° C (-13 ° F to 158 F) Operating Hu midity: 5% to 90% non-con densing Storage Hum idity: 5% to 95% non-c ond ...

  • Perle Systems c-1111-xxxxx - page 17

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 17 Model Mode Wavelength (nm) TX Power (dB) RX Power (dB) Budget (dB) C-1110-S2LC40 CM-1110-S2LC40 SM TX: 1310 RX:1310 Min: -3 Max: 2 Min: -23 Max: -3 20 C-1110-S1SC40U CM-1110-S1SC40U SM TX: 1310 RX:1490 Min: -3 Max: 2 Min: -23 Max: -3 14 C-1110-S1SC40D CM-1110-S1SC40D SM TX:1490 RX: ...

  • Perle Systems c-1111-xxxxx - page 18

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 18 24-22 AW G Straight throu gh or Ether net cross over Complian ce Informa tion FCC This product has been found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection again st harmful in ...

  • Perle Systems c-1111-xxxxx - page 19

    Perle 10/100/1000 Media Conve rter Module – Installation Guide 19 Warrant y / Registratio n Perle’s stan dard Lifetim e Warrant y provides cus tomer s with return to factor y repairs for Perl e products th at fail un der the c onditions of the warrant y coverage. De tails ca n be found at: http://www.perle.com/suppo rt_services/warranty.shtml C ...

メーカー Perle Systems カテゴリー TV Converter Box

Perle Systems c-1111-xxxxxのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- c-1111-xxxxxの取扱説明書
- Perle Systemsの製品カード
- パンフレット
- またはPerle Systems c-1111-xxxxxの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Perle Systems c-1111-xxxxxの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Perle Systems c-1111-xxxxxの取り付け説明書、サービスマニュアル、簡易説明書、またはPerle Systems c-1111-xxxxxのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Perle Systems c-1111-xxxxxの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Perle Systems c-1111-xxxxxデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがPerle Systems c-1111-xxxxxを使用するのを助ける技術的文書のことです。説明書は通常、全てのPerle Systems c-1111-xxxxxユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Perle Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Perle Systems c-1111-xxxxxの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははPerle Systems c-1111-xxxxxの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Perle Systems c-1111-xxxxxに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Perle Systems c-1111-xxxxxデバイスの基本機能を使うにあたってのヒント。 Perle Systems c-1111-xxxxxのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Perle Systems c-1111-xxxxxに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるPerle Systems c-1111-xxxxxのメーカー/サービスへの連絡先に関する情報。

Perle Systems c-1111-xxxxxについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもPerle Systems c-1111-xxxxxの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPerle Systems c-1111-xxxxxで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)