-
Pelco DX9000H-C SERIES - page 1
DX9000 Series Digital V ideo Recorder C685M-D (2/03) ® INST ALLA TION/OPERA TION DX9000F-C Series & DX9000H-C Series ...
-
Pelco DX9000H-C SERIES - page 2
2 C685M-D (2/03) CONTENTS Section Page IMPORT ANT SAFEGUARDS AND W ARNINGS .............................................................................................. .................................................................... 3 DESCRIPTION ................................................................................................. ...
-
Pelco DX9000H-C SERIES - page 3
C685M-D (2/03) 3 This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and mainte- nance instructions in the literature accompanying this unit. CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to ...
-
Pelco DX9000H-C SERIES - page 4
4 C685M-D (2/03) Figure 1. DX9000 System MODELS DX9008F-C Eight-channel digital video recorder , 30 ips for each camera, Revision C software DX9016F-C Same as DX9008F-C, except has 16 camera inputs DX9024F-C Same as DX9008F-C, except has 24 camera inputs DX9008H-C Eight-channel digital video recorder , 15 ips for each camera, Revision C software DX ...
-
Pelco DX9000H-C SERIES - page 5
C685M-D (2/03) 5 INST ALLA TION Make sure all of the supplied items are present. 1 Recorder 2 Power cords (1 USA standard and 1 European standard) 1 Patch panel 1-5 BNC mounting plates 1-5 37-pin connectors with 24-inch (61 cm) sets of coaxial cable and BNC connectors 2-10 Screws, 6-32 x .375-inch, black, pan head 4 Screws, 10-32 x .750-inch, black ...
-
Pelco DX9000H-C SERIES - page 6
6 C685M-D (2/03) MOUNTING CAUTION: The recorder should be installed in an air conditioned room where the temperature is maintained between 65° and 70°F (18° and 21°C) with relative humidity not to exceed 80 percent, non-condensing. The recorder should be connected to an uninterruptible power supply (UPS) capable of supplying 2A for 120 V AC pow ...
-
Pelco DX9000H-C SERIES - page 7
C685M-D (2/03) 7 CONNECTIONS Make the following connections on the rear of the recorder . Refer to Figure 3. NOTE: A mouse, keyboard, and monitor are required to configure the recorder to operate over a LAN/W AN network. After configuration, they can be left for network administration and troubleshooting or they can be removed. Do not connect the r ...
-
Pelco DX9000H-C SERIES - page 8
8 C685M-D (2/03) Figure 3. DX9000 System Connections COM 2 * STORAGE UNIT #0 ** STORAGE UNIT #2 ** STORAGE UNIT #3 ** STORAGE UNIT #1 ** 37 PIN CONNECTOR PA TCH P ANEL ETHERNET SWITCH RECORDER COM 1 * TO V I EWST A TION * COM 1 AND COM 2 ARE RESERVED FOR PELCO’S USE. ** STORAGE UNITS ARE NUMBERED AND MUST BE CONNECTED T O THE PROPER CONNECTOR. ...
-
Pelco DX9000H-C SERIES - page 9
C685M-D (2/03) 9 SYSTEM CONFIGURA TION Necessary Information To configure the recorder , you will need to provide the following information. Most of the information can be obtained from your network administrator . • User name and company name They do not have to be unique. T ypically both are set to the company name, for example, Pelco. • Micr ...
-
Pelco DX9000H-C SERIES - page 10
10 C685M-D (2/03) Figure 4. Server Configuration 1. Windows should boot up all the way to the desktop without user intervention. Close all recording applications on the desktop. On the task bar click Start > Programs > DX9000 Server > Server Configuration Utility . 2. Ensure that the number of channels and recording frame rate (Half or Ful ...
-
Pelco DX9000H-C SERIES - page 11
C685M-D (2/03) 11 8. Define the Pre-Alarm Interval for the cameras associated with this recorder . These values are listed in seconds. The default is 60 seconds. This feature is relevant only if you do not intend to record continuously (24 hours a day) and wish to record events only during part or all of the day . 9. Checkmark the Auto Record box i ...
-
Pelco DX9000H-C SERIES - page 12
12 C685M-D (2/03) 1. Double-click the Client Configuration Utility icon if it's on the viewstation desktop or click the Start button and go to Programs > Viewstation > Client Configuration Utility . 2. Enter user name and password. The default is admin/admin. 3. Click Login. 4. In the Custom naming window , highlight the prior name that ...
-
Pelco DX9000H-C SERIES - page 13
C685M-D (2/03) 13 NETWORK CONNECTION The following is required: • Dedicated LAN of four or more ViewStations requires a minimum network of 100BaseT (100 Mbit/sec) • Integration within an existing LAN/W AN requires a network of 100BaseT (100 Mbit/sec) 1. Refer to Figure 3. On the back of the recorder , connect a shielded network cable to the Eth ...
-
Pelco DX9000H-C SERIES - page 14
14 C685M-D (2/03) SPECIFICA TIONS ELECTRICAL/VIDEO Input V oltage: 100-240 V AC, 50/60 Hz, auto-ranging Power Consumption: 195W maximum Signal System: NTSC/P AL Operating System: Windows 2000 and SP1 Service Pack Recording Resolution NTSC: 352 x 240 pixels P AL: 384 x 288 pixels Compression: MPEG Compressed Image Size: 352 x 240: average 1.4 KB for ...
-
Pelco DX9000H-C SERIES - page 15
C685M-D (2/03) 15 REVISION HISTORY Manual # Date Comments C685M 5/01 Original version. C685M-A 7/01 Revised the Installation and Specifications sections. C685M-B 6/02 Revised format. Updated for V ersion C software. C685M-C 9/02 Updated parts list on page 7. Revised Figure 2. Added Repairing the SQL Database and removed SQL Server Initialization . ...
-
Pelco DX9000H-C SERIES - page 16
World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO 9001 Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada ® ...
Pelco DX9000H-C SERIESについてご質問がありますか?
次のフォームを使用してください
見つけた説明書を読んでもPelco DX9000H-C SERIESの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPelco DX9000H-C SERIESで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。