JBL VT4889の取扱説明書

20ページ 0.92 mb
ダウンロード

ページに移動 of 20

Summary
  • JBL VT4889 - page 1

    Array Applications Manual For models VT4889, VT4888, VT4887, VT4881, VT4880 ...

  • JBL VT4889 - page 2

    Page 2 TABLE OF CONTENTS PAGE GENERAL AMPLIFICATION NOTES & REQUIREMENTS…………………. 3 SUBWOOFER WIRING NOTES………………………………………………… 4 STANDARD AMPLIFICATION RACK LIMITER SETTINGS NOTES …………….……………………………..…….. 5 VT4887 & VT4881 TRANSDUCER COMPLEMENT.………… ...

  • JBL VT4889 - page 3

    Page 3 GENERAL AMPLIFICATION NOTES & REQUIREMENTS • For the purpose of this discussion: Crown MA series amplifiers are used below. HF indicates High Frequency drivers, MF indica tes Mid Frequency drivers, LF indicates Low Frequency drivers and VLF stands for Ve ry Low Frequency drivers (subwoofers). • Equivalent amplifiers can be used as su ...

  • JBL VT4889 - page 4

    Page 4 NOTES ON SUBWOOFER WIRING • VT4880: Users may choose to wire both 2258 ( 18”) components in parallel to one (1) channel of a MA-3600 or MA-5002 for (4) ohms load. In this case each amplifier channel drives one VT4880. If two VT4880 are wired in parallel, the load is two ohms and there will be no amplifier power headroom. • VT4881: User ...

  • JBL VT4889 - page 5

    Page 5 NOTES REGARDING LIMITER SETTINGS • The recommended limiter threshold settings pr ovide 3 dB of headroom before the component or bandpass peak voltage is reached. • The component or bandpass peak voltage is 6 dB above the voltage used at continuous maximum power. • These settings assume the use of a Crow n MA-5002 in stereo mode with in ...

  • JBL VT4889 - page 6

    Page 6 Amplifier Configurations: 4 x VT4887 & 2 VT4881 / 3 MA- 5002 Amplifier Channel Speakon NL8 Terminals Driving Nominal Impedance at Pins Amplifier Power Rating at Nominal Impedance Power Available to each Bandpass Bandpass Peak Voltage Vac Limiter Threshold dBu Pins 4± 4 x 2407H & 8 x 2104H 4Ω 1800W 900W 54V -3 Ch 1. MA-5002VZ Ch2. ...

  • JBL VT4889 - page 7

    Page 7 IM PORT A NT NO TES: All wiring conf igurations shown above use 8-c onductor s peak er cables t erm inated with Neutr ik NL8 "Speakons ". Ensure that each conduc tor in the c able is a m inim um of #13 AW (3-4 m m ). JBL VT4887: The MF & HF section of a VT 4887 has an inter nal passive c ross over network . =8 Ω Pins 4± This ...

  • JBL VT4889 - page 8

    Page 8 VT4888 Transducer Complement: Model Speakon NL8 Terminals Per box Nominal Impedance per transducer Nominal Impedance per Passband A ES Power 100 HR Rating per Transducer Peak Power Rating per Transducer Recommended Power per Passband HF 2431H Pins 4± x 2 8Ω 16 Ω 75W 300W 300W MF 2106H Pins 3± x 4 8 Ω 8 Ω 100W 400W 800W LF 2262H Pin ...

  • JBL VT4889 - page 9

    Page 9 Amplifier Configurations: 6 VT4888 / 4 MA-5002VZ Amplifier Channel Speakon NL8 Terminals Driving Nominal Impedance at Pins Amplifier Power Rating at Nominal Impedance Power Available to each Component Bandpass Peak Voltage Vac Limiter Threshold dBu Pins 4± 6 x 2431H 5.7 Ω 1300W 216W 56V -3 Ch 1. MA-5002VZ Ch2. Pins 4± 6 x 2431H 5.7 Ω 1 ...

  • JBL VT4889 - page 10

    Page 10 IM PORT A NT NOT ES: All wiring configur ations shown above use 8 -conductor speak er cab les term inated with Neutrik NL8 "Speak ons ". Ensure that each c onductor in the c able is a m inimum of #13 AW Guage (3-4 m m ). JBL VT 4888: The HF section of a VT4888 has two 2431H dr ivers (8 Ω ) wired in Series. =16 Ω Pins 4± The M ...

  • JBL VT4889 - page 11

    Page 11 VT4889 Transducer Complement: Model Speakon NL8 Terminals Per box Nominal Impedance per Transducer Nominal Impedance per Passband AES Power 100 HR Rating per Transducer Peak Power Rating per Transducer Recommended Power per Passband HF 2435H Pins 4± x 3 5.3 Ω 16 Ω 75W 300W 300W MF 2250H Pins 3± x 4 8 Ω 8 Ω 300W 1200W 1200W LF 2255 ...

  • JBL VT4889 - page 12

    Page 12 Amplifier Configurations: 6 VT4889 / 4 MA-5002VZ Amplifier Channel Speakon NL8 Terminals Driving Nominal Impedance at Pins Amplifier Power Rating at Nominal Impedance Power Available to each Component Bandpass Peak Voltage Vac Limiter Threshold dBu Pins 4± 9 x 2435H 5.7 Ω 1300W 145W 100V 2.5 Ch 1. MA-5002VZ Ch2. Pins 4± 9 x 2435H 5.7 ? ...

  • JBL VT4889 - page 13

    Page 13 IM PORT A NT NOT ES: All wir ing c onf igur ati ons s hown above use 8-c onduct or s peaker cabl es t er mi nated wit h Neutr ik NL8 "Speak ons". Ensure t hat eac h conduc tor in t he cabl e is a mi nim um of #13 AW Guage ( 3-4 m m) . JBL VT4889: The HF sec ti on of a VT4889 has thre e 2435H driver s ( 5.3 Ω ) w ired in S eries. ...

  • JBL VT4889 - page 14

    Page 14 VERTEC SYSTEMS SUSPENSION HARDWARE & ASSEMBLY NOTES Arrays of similar V ER T EC Model • Each V ER T EC model uses the matching m odel of Array Frame (VT488X-AF) or Short Frame (VT488X-SF) to create clusters of the same m odel. • These same frames can also be used to ground stack the various systems. Arrays of Combined V ER T EC Mode ...

  • JBL VT4889 - page 15

    Page 15 VERTEC SYSTEMS SUSPENSION FRAMES & HINGE BARS V ER T EC MODEL FRAME MODELS NOTES HINGE Part # VT4889 VT4889-AF VT4889-SF VT4800-UA VT4800-DA Standard long frame. 16 VT4889 @ 7:1 DF* Standard short frame. 16 VT4889 @ 7:1 DF Universal frame to hang any model to any m odel. Adapter frame to hang 4 VT4887 under VT4889 336892-001 (4889 FRONT ...

  • JBL VT4889 - page 16

    Page 16 VERTEC VT4888, VT4887, VT4881 SYSTEMS: SUSPENSION FRAMES ...

  • JBL VT4889 - page 17

    Page 17 VERTEC SYSTEMS: SUSPENSION HINGE BARS High-grade steel alloy hinge bars are used to couple adjacent boxes together. There are several different types. To ensure ease and proper inter-connection, make certain that the correct hinge bar model is matched to the appropriate Array Frame or Short Frame as well as the correct V ER T EC model. ...

  • JBL VT4889 - page 18

    Page 18 VT4889 with VT4887 attached using VT4800-DA ...

  • JBL VT4889 - page 19

    Page 19 TYPICAL 8-BOX HANGING ARRAY The VT4889 full size, the VT4888 mid size, and VT4887 compact line array elements can be suspended from either the “AF” (long) or “SF” (short) array frame. Shown here, eight VT4887 suspended from a VT4887-AF array frame. ...

  • JBL VT4889 - page 20

    Page 20 VERTEC SUPPORT TEAM DIRECTOR, TOUR SOUND David Scheirman Office phone: (818) 895-3458 Pager: (888) 861-1622 Email address: dscheirm@harman.com TOUR SOUND PRODUCT MANAGER Raul Gonzalez Office phone: (818) 830-8749 Mobile phone: (818) 802-9176 Email address: rgonzale@harman.com DIRECTOR, SYSTEM DEVELOPMENT Mark Engebretson Office phone: (818) ...

メーカー JBL カテゴリー Car Speaker

JBL VT4889のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- VT4889の取扱説明書
- JBLの製品カード
- パンフレット
- またはJBL VT4889の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、JBL VT4889の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、JBL VT4889の取り付け説明書、サービスマニュアル、簡易説明書、またはJBL VT4889のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、JBL VT4889の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

JBL VT4889デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJBL VT4889を使用するのを助ける技術的文書のことです。説明書は通常、全てのJBL VT4889ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

JBLの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. JBL VT4889の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJBL VT4889の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。JBL VT4889に関してこのドキュメントで見つけることができる全てのヒントの目次
3. JBL VT4889デバイスの基本機能を使うにあたってのヒント。 JBL VT4889のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。JBL VT4889に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJBL VT4889のメーカー/サービスへの連絡先に関する情報。

JBL VT4889についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJBL VT4889の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJBL VT4889で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)