Knoll HD177の取扱説明書

34ページ 1.12 mb
ダウンロード

ページに移動 of 34

Summary
  • Knoll HD177 - page 1

    HD177 HDTV DLP Projector Users Manual v2.0 ...

  • Knoll HD177 - page 2

    2 FCC Warning This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if no ...

  • Knoll HD177 - page 3

    3 TABLE OF CONTENTS Safety Warnings 2 Safety Instructions 4 Introduction/Usage guidelines 5 Setting up and positioning the projector 6 Projection distances 7 Video device connections 8 Displaying a video image 10 Connecting a computer 11 Shutting down the projector 12 Troubleshooting your setup 12 Using the keypad buttons 15 Using the remote contro ...

  • Knoll HD177 - page 4

    4 SAFETY INSTRUCTIONS Please read and follow all safety i nstructions provided BEFORE usi ng your new projector. Failure to comply with safety instructions may result in fire, el ectrical shock, or personal injury and m ay dam age or impair prot ection provided by equi pment. Please save all safety instructions. Safety Definitions: Warning: Stateme ...

  • Knoll HD177 - page 5

    5 INTRODUCTION The Knöll™ HD177 Introduction Congratulations and thank you for your choice of a superior digital image projection device. Your new Knöll HD177 is specifically designed for home cinema applications. The HD177 sets the standard for enhanced definition digital perfecti on, featuring true Enhanced Definition 1024x576 resolution usin ...

  • Knoll HD177 - page 6

    6 SETTING UP THE PROJECTOR There are a number of factors to consider w hen determining where to set up the projector, including the size and shape of your screen, the lo cation of your power outlets, and the distance between the projector and the rest of your equipment. But here are some general guidelines. NOTE: To ensure adequate cable a ccess, d ...

  • Knoll HD177 - page 7

    7 HD177 Projection Distances 16:9 Image Screen Diagonal 92" 103" 106" 110" 122.5" 146.75" 165.25” Min. Distance 167" 187" 192" 200" 223" 267" 300” Max. Distance 208" 233" 239" 249" 278" 332" 374” Drop or Rise 14.8” 16.7” 17.1” 17.8” 19.8” 23.8? ...

  • Knoll HD177 - page 8

    8 Video Connections 1. Place the projector on a flat surface or using a ceiling mount kit, on the ceiling. If you want to project from behind a rear projection screen, set up the projector behind your screen. 2. Position the projector the desired distance from the screen. The distance from the lens of the projector to the screen and the zoom settin ...

  • Knoll HD177 - page 9

    9 Connecting a Video Device If your video device has more than one output, select the highest quality one. DVI video has the best quality , followed by Component video, S-video, and then composite video. If the video device uses component cable connectors, plug the cable’s green con- nectors into the green component-out connector on the video dev ...

  • Knoll HD177 - page 10

    10 If the video device uses a VESA connector, plug a VESA cable into the video-out connector on the video device. Plug the other connector into the VESA connector on the projector. Connecting the power cable Connect the power cable to the connector on the back of the projector and to y our electrical outlet. The Power LED on the key pad turns solid ...

  • Knoll HD177 - page 11

    11 If the image is not square, adjus t the keystone using the buttons on the keypad. Press the upper Ke ystone button to reduce the width of the upper portion of the image, and press the low er Key stone button to reduce the width of the low er portion. The Contrast , Brightness , Color , and Tint are factory calibrated to D65 colors, but y ou can ...

  • Knoll HD177 - page 12

    12 Shutting down the projector Power Save The projector has a Power Save feature in the System menu that automatically turns the lamp off after no signals are detected for 20 minutes. After 10 additional mi nutes with no signal, the projector pow ers dow n. If an active signal is received before the projector power s dow n, the image is displa y ed ...

  • Knoll HD177 - page 13

    13 The following table show s some potential problems. In some cases, more than one possible solution is provided. Try the solutions in the order they are presented. When the problem is solved, you can skip the additional solutions. ...

  • Knoll HD177 - page 14

    14 ...

  • Knoll HD177 - page 15

    15 Using the projector keypad buttons Most buttons are described in detail in other sections, but here is an overvi ew of their functions: Pow er– turns the projector on and off. Menu– opens the on-screen menus. Select– confirms choices made in the menus. Up/down arrow s– navigates to and adjusts settings in the menus. A uto image– resets ...

  • Knoll HD177 - page 16

    16 Using the remote control The remote uses two (2) provided AAA batteries. They are easily installed by sliding the cover off the remote’s back, aligning the + and - ends of the batteri es, sliding them into pl ace, and then replacing the cover. To operate, point the remote at the projection screen or at the proj ector (not at the video device o ...

  • Knoll HD177 - page 17

    17 Optimizing video images After the video device is connect ed properly and the image is on the screen, you can opt imize the image using the onscreen menus. Change the Aspect ratio. Aspect ratio is the ratio of the image w idth to image height. TV screens are usually 1.33:1, also known as 4:3. HDTV and most DVDs are 1.78:1, or 16:9. Choose the op ...

  • Knoll HD177 - page 18

    18 The menus are grouped by usage: The Picture menu provi des image adjustments. The Settings menu provides set-up type adjustments that ar e not changed often. The About menu provides a read- only display of information about the projector and source. Certain menu items may be hidden until a particular source is connected. For example, Tint is onl ...

  • Knoll HD177 - page 19

    19 Native : this mode bypasses the internal scaler, displaying the image with no resizing. Since the native resolution is 1280x720 and 4x3 video images are approximately 640x480, 4x3 images will always be smaller than the display and will be centered in the display. Computer images 1024x768 or smaller will also be centered in the display. If a 16x9 ...

  • Knoll HD177 - page 20

    20 Natural Wide : this mode stretches a 4:3 image to fill the entire 16:9 screen. The center two-thirds of the image is unchanged; the edges of the image are stretched. Presets : This allows you to customize settings and save the settings to be restored later. To restore the factory default settings, choose Factory Reset in the Settings>Service ...

  • Knoll HD177 - page 21

    21 Advanced settings TrueLife : This option refers to Faroudja’s TrueLife processing of the image. All standard definition interlaced vi deo signals (composite, S-video and component) are routed through this processor. Extended and High Definition progressive component sources are not routed though this processor by default. You can turn TrueLife ...

  • Knoll HD177 - page 22

    22 Color Control : allows you to individually adjust the gain (relative warmth of the color) and the offset (the amount of black in the color) of the r ed, green, and blue colors. Gamma : Gamma tables contain preset intensity configurations optimized for the input source. You can select a gamma table that has been specifically tuned fo r either fil ...

  • Knoll HD177 - page 23

    23 The Source Enable feature is used to eliminate certain sources from this search, which will speed the search. By default, the check boxes for all sources are checked. Uncheck a source’s box to eliminate it from the search. System All options in this menu toggle between on and off. Rear: reverses the image so you can project from behind a trans ...

  • Knoll HD177 - page 24

    24 Blank Screen : determines what color displays w hen you press the Blank button on the remote or when no source is active. Language : allow s you to select a language for the onscreen display of menus and messages. Service Menu Use these features, hi ghlight them and press Select . Factory Reset : restores all settings (except Lamp Hours, Ce ilin ...

  • Knoll HD177 - page 25

    25 Replacing the projection lamp The lamp hour timer in the A bout menu counts the number of hours t he lamp has been in use. After 1980 hours, the message “Change lamp” briefly appears on the scr een at each startup. To maintain optimal video performance, we recommend changing the lamp a fter 2000 hours, depending on usage. You can order new l ...

  • Knoll HD177 - page 26

    26 7. Tighten the single screw. 8. Replace the lamp door by sliding the tabs into the t ab bays and tightening the two screws. 9. Plug in the power cable, then press the Power button to turn the projector back on. 10. Reset the lamp hour timer. Resetting the lamp timer To reset the lamp age, simultaneously holding down the tw o Brightne ss buttons ...

  • Knoll HD177 - page 27

    27 Red LED behavior and projector errors If the projector is not functioning pr operly and the red LED is blinking, c onsult the table below to determine a possible cause. There are two second pauses betw een the blinking cycles. ...

  • Knoll HD177 - page 28

    28 ...

  • Knoll HD177 - page 29

    29 ...

  • Knoll HD177 - page 30

    30 RS232 Terminal Specifications and Commands To control the projector from an LCD control panel, connect an R S-232 cable to the serial control connector on the projector and set your com puter’s serial port set tings to m atch this com municat ion configuration: Command format All comm ands consist of 3 alpha charact ers followed by a request, ...

  • Knoll HD177 - page 31

    31 ...

  • Knoll HD177 - page 32

    32 ...

  • Knoll HD177 - page 33

    33 ...

  • Knoll HD177 - page 34

    34 LIMITED WARRANTY Knöll Systems, Inc. (“Knöll”) w arrants that each HD177 (“the Product”) sold hereunder w ill conform to and function in accordance with the w ritt en specifications of Knöll. Said limited w arranty shall apply only to the first person or entity that purchas es the Product for personal or busi ness use and not for the ...

メーカー Knoll カテゴリー Projection Television

Knoll HD177のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- HD177の取扱説明書
- Knollの製品カード
- パンフレット
- またはKnoll HD177の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Knoll HD177の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Knoll HD177の取り付け説明書、サービスマニュアル、簡易説明書、またはKnoll HD177のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Knoll HD177の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Knoll HD177デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがKnoll HD177を使用するのを助ける技術的文書のことです。説明書は通常、全てのKnoll HD177ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Knollの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Knoll HD177の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははKnoll HD177の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Knoll HD177に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Knoll HD177デバイスの基本機能を使うにあたってのヒント。 Knoll HD177のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Knoll HD177に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるKnoll HD177のメーカー/サービスへの連絡先に関する情報。

Knoll HD177についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもKnoll HD177の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがKnoll HD177で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)