ページに移動 of 119
LCD Digital Camera User s Guide QV-2000UX/Ir English ...
E-2 QUICK REFERENCE The section provides a general outline of operational procedures. Loading Batteries (page E-35) Setting the Current Date and Time (page E-41) On the bottom of the camera, slide the battery compartment cover lock towards the front of the camera ( 1 1 1 1 1 ) to release the cover. Grasping both sides of the battery compartment cov ...
E-3 QUICK REFERENCE Recording Images (page E-43) 1 2 After composing the image on the monitor screen, press the shutter button about half way and hold it there. • The camera’s Auto Focus feature automatically focuses the image. After confirming that the Auto Focus operation is complete (the operation lamp lights green), press the shutter button ...
E-4 QUICK REFERENCE Playing Back Images (page E-75) M E N U P LA Y O N /O F F D IS P T W S E T MODE C A R D A CCE SS 2 1 Press PLAY ON / OFF. • This turns on power and displays recorded images on the monitor screen. Pressing PLAY ON/OFF in the Record Mode switches to the Playback Mode. Use [ ] and [ ] to scroll through the images stored in camera ...
E-5 QUICK REFERENCE Deleting Images (page E-88) M E N U P L A Y O N /O F F D IS P T W S E T C A R D AC C ESS MODE 2 1 3 4 5 Press MENU. Press SET. Double check to make sure that you really want to delete the image you selected. • Press MENU to exit the image delete operation. Press PLAY ON/OFF. Use [ ] , [ ] , [ ] and [ ] to select “Delete”, ...
CONTENTS E-6 E-2 QUICK REFERENCE E-9 FEA TURES E-14 PRECAUTIONS E-18 UNP ACKING Attaching the Strap .................................................. E-19 Using the Soft Case ................................................. E-20 E-21 GENERAL GUIDE Lens ......................................................................... E-21 T op and Display ...
CONTENTS E-7 Portrait Recording .................................................... E-65 Using the Self-timer ................................................. E-65 Shutter Speed Priority Image Recording ................. E-66 Aperture Priority Image Recording .......................... E-67 Performing Manual White Balance ........................ ...
CONTENTS E-8 • CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual. • CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise through the use of the QV-2000UX/Ir. • CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or ...
FEATURES E-9 FEATURES Simple image management (page E-105) Images are stored on a large-capacity CompactFlash memory card. A new Card Browser feature produces thumbnails of all images on a card quickly and easily. Digital Print Order Format (DPOF) (page E-91) Images can be easily printed in the sequence you want using a DPOF compatible printer. DPO ...
FEATURES E-10 Movie and panorama images (pages E-76, 77) A buffer lets you capture images of events that occurred before you pressed the shutter button. A built-in function lets you combine up to nine images into breathtaking panoramas. CASIO original metering system Light metering includes innovative multi-pattern metering. Megapixel CCD Images ar ...
FEATURES E-11 6X zoom is produced using 3X optical zoom together with 2X digital zoom. Landscape Mode Night Scene Macro Feature Portrait Mode Shutter Speed Priority (S Mode) page E-56 page E-63 page E-62 page E-57 page E-65 page E-66 ...
FEATURES E-12 Aperture Priority (A Mode) page E-67 Self-timer Date and Time Stamping 9-image Screen Slide Show 99/9/12 page E-65 page E-41 page E-79 page E-80 Display Zoom page E-78 ...
FEATURES E-13 Image Protection page E-86 ...
PRECAUTIONS E-14 PRECAUTIONS General Precautions Be sure to observe the following important precautions whenever using the QV-2000UX/Ir. All references in this manual to “this camera” and “the cam- era” refer to the CASIO QV-2000UX/Ir Digital Camera. • Never try to take pictures or use the built-in display while operating a motor vehicle ...
PRECAUTIONS E-15 Operating conditions • This camera is designed for use in temperatures ranging from 0 ° C to 40 ° C. • Do not use or keep the camera in the following areas. — In areas subject to direct sunlight — In areas subject to high humidity or dust — Near air conditioners, heaters, or other areas subject to temperature extremes ? ...
PRECAUTIONS E-16 About the camera’s backlight… • The camera is equipped with a fluorescent light source to provide the back lighting for its LCD. • The normal service life of the backlight is approximately six years, when the camera is used for about two hours a day. • Should the LCD image appear abnormally dark, take the camera to your d ...
PRECAUTIONS E-17 Lens • Camera performance can be adversely affected by finger- prints or dirt on the lens surface. Never touch the lens sur- face with your fingers. • Should the lens become dirty, use a blower to blow off dirt and dust, or a soft, dry cloth to wipe off the lens. • This camera uses a telescoping type lens, which moves wheneve ...
UNPACKING E-18 UNPACKING Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your deale r as soon as possible. • Basic Reference • Bundled Software User’s Manual Camera Memory card (8 MB) Loaded in the camera when you purchase it. Soft case Video cable Strap Alkaline batteries ( ...
UNPACKING E-19 IMPORTANT! • Be sure to keep the strap around your wrist whenever using the camera to protect against accidentally drop- ping it. • The supplied strap is intended for use with this camera only. Do not use for any other application. • Never swing the camera around by the strap. • Allowing the camera to swing freely from your n ...
UNPACKING E-20 Using the Soft Case Keep the camera in its soft case to protect it when not in use. If you pass the strap through the hole in the side of the case, you will be able to use the camera without removing it from the case. The pocket inside the soft case can be used to store memory cards. Monitor screen facing down. ...
GENERAL GUIDE E-21 GENERAL GUIDE The following illustrations show the names of each component, button and switch on the camera. Lens (page E-17) Shutter button (page E-44) Exposure sensor (page E-50) Self-timer lamp (page E-24) Viewfinder (page E-47) Flash (page E-49) Terminal panel cover (page E-23) Indicator display (page E-28) Lens cover/power s ...
GENERAL GUIDE E-22 Top and Display M E N U P L A Y O N /O F F D IS P T W S E T C A R D ACCESS MODE LCD (page E-26) DISP button (pages E-26, 29) (FLASH/Tran-P SEND) button (pages E-49, 100) (FOCUS/Tran-P RECEIVE) button (pages E-57, 58, 99) (SELF-TIMER/FOLDER) button (pages E-65, 84) MENU button (page E-29) Flash lamp (page E-25) MODE button (page E ...
GENERAL GUIDE E-23 LOCK OPEN C A R D A C C E S S Tripod screw hole Battery compartment lock (page E-35) Opening the Terminal Panel Cover Battery compartment cover (page E-35) Diopter dial (page E-47) DIGITAL terminal (page E-94) USB port (page E-94) VIDEO OUT terminal (page E-94) AC power terminal (page E-38) Card access lamp (page E-24) Memory car ...
GENERAL GUIDE E-24 Card access lamp The Card access lamp flashes green while the memory card is being accessed. Never remove the memory card while the Card access lamp is flashing. CARD ACCESS Self-timer lamp The Self-timer lamp flashes when the self-timer is perform- ing a timer operation prior to releasing the shutter. Card access lamp Self-timer ...
GENERAL GUIDE E-25 • The camera is ready to record when the lamp is off. Partial Shutter Button Operation lamp The Operation lamp shows the operational status of the camera as described below. MENU MENU Operation lamp Recording Mode Flashing One of the following operations is in progress: start up, save (single or multiple), movie recording (PAST ...
MONITOR SCREEN E-26 Pressing DISP causes various indicators to appear on the monitor screen. PLAY ON/OFF DISP DISP button Recording Mode Zoom factor X2 Flash Mode Auto None Flash On Flash Off Red-eye reduction Self-timer 10 SEC, 2 SEC Battery capacity Date and time This information appears for one or two seconds, and then disappears. Camera shake i ...
MONITOR SCREEN E-27 Recording Mode Indicators Auto Focus Frame • Focusing complete: Green • Focusing failed: Red Flash Mode ( ) Screen when shutter is pressed half way Flash indicator appears to indicate that flash will be fired (when auto flash is selected). P mode (Normal) Movie Panorama A mode (Aperture- priority Auto Mode) S mode (Shutter- ...
MONITOR SCREEN E-28 Playback Mode Protect indicator Battery capacity Pages Folder name Date and time (date and time of recording) Quality FINE NORMAL ECONOMY Image size 1600 x 1200 800 x 600 Folder name – File number Indicator display The indicator display located on the top of the camera also shows various camera status indicators during image r ...
MONITOR SCREEN E-29 Menu Screens Pressing MENU displays the menu screen. The contents of the menu screen depend on whether you are in the PLAY Mode or REC Mode. While the menu screen is on the dis- play, press DISP to toggle between the basic menu and the advanced menu. In this User’s Guide, the basic menu is always used for items that appear on ...
MONITOR SCREEN E-30 Making menu settings 1. Slide open the lens cover. 2. Press MENU. 3. Press DISP to toggle between the basic menu and the advanced menu. 4. Use [ 왘 ],[ 왗 ],[ 왔 ] and [ 왖 ] to select the category or function you want, and then press SET. [ 왘 ] [ 왗 ] [ 왔 ] [ 왖 ] : Item selection SET : Execution of a selection MENU : ...
MEMORY CARDS E-31 MEMORY CARDS This camera uses a memory card (CompactFlash cards) for image memory. A memory card is loaded in the camera when you purchase it. IMPORTANT! • Make sure that the power of the camera is turned off before you insert or remove a memory card. • When inserting a memory card into the camera, make sure that the card is o ...
MEMORY CARDS E-32 IMPORTANT! • Insert only memory cards into the memory card slot. Inserting any other type of card can cause malfunc- tion. • Should water or any other foreign matter get into the memory card slot, immediately turn off power, unplug the AC adaptor, and contact your original retailer or nearest CASIO Service Provider. • Never ...
MEMORY CARDS E-33 Formatting a Memory Card You can format a memory card to delete all of the data stored on it. IMPORTANT! • Formatting a memory card deletes all images on the card, even if some or all of the images are protected (page E-86). • Data deleted by a memory card format operation can- not be recovered! Be sure to carefully check and ...
MEMORY CARDS E-34 • Up to 250 image files can be stored in each folder. The following shows a typical file name. • When you try to save the 251st image to a folder, the cam- era automatically creates a new folder and store the image there. • The above maximum number of files and folders are abso- lute maximums. The actual number of folders an ...
POWER SUPPLY E-35 POWER SUPPLY The camera features a two-way power supply that lets you use either batteries (AA-size alkaline, lithium or Ni-MH) or household AC current. Loading Batteries Be sure that camera power is turned off whenever loading or replacing batteries. 1. On the bottom of the camera, slide the battery compartment cover lock towards ...
POWER SUPPLY E-36 Standard Battery Life This camera can be powered using AA-size alkaline, lithium or Ni-MH batteries. The battery life reference values given below indicate the amount of time at standard temperature (25 ° C) until power automatically turns off due to battery failure. They do not guarantee that batteries will perform the amount of ...
POWER SUPPLY E-37 Low Battery Indicator The battery capacity indicator (shown only when the image information display is turned on) changes in the following se- quence as battery power decreases: “ ” “ ” “ ” “ ”. If you continue to use the camera while the battery level is “ ” or “ ”, camera power will automatically turn off ...
POWER SUPPLY E-38 Using AC Power Use the optional AC adaptor (AD-C620) to power the cam- era from standard AC power. AC Adaptor precautions • Never use an electrical outlet whose voltage is outside the rating marked on the AC adaptor. Doing so can create the danger of fire or elec- trical shock. Use only the optional AC adaptor specified for this ...
POWER SUPPLY E-39 • Always be sure to use the AD-C620 AC adap- tor only. Using any other AC adaptor can cause damage to the camera not covered by the war- ranty. • When unplugging the AC adaptor from the wall socket, be sure to grasp the adaptor (not the cord). • Avoid any undue bending, pulling, and twisting of the AC adaptor’s cord, and n ...
POWER SUPPLY E-40 Setting SLEEP and AUTO POWER OFF Trigger Times 1. Slide open the lens cover. 2. Press MENU. 3. Select “Options” “Power Save” “Power Save”. • “Options” appears on the advanced menu only. 4. Use [ 왔 ] and [ 왖 ] to select “Sleep” or “Auto Power Off”. 5. Select the trigger time you want to set. 6. When th ...
SETTING THE CURRENT DATE AND TIME E-41 SETTING THE CURRENT DATE AND TIME Use the following procedures to set the current date and time, and to select the date format. When you record an image, the time and date the image was shot is registered in accordance with data from the camera’s built-in clock. You can even use the TIME STAMP function to ? ...
SETTING THE CURRENT DATE AND TIME E-42 Selecting the Date Format Example: Sep 12, 1999 You can select any one of the following formats for the above date: 99/9/12, 12/9/99, 9/12/99. 1. Press MENU. 2. Select “Set Up” “Date” “Style”. 3. Use [ 왔 ] and [ 왖 ] to select the date format you want, and then press SET. ...
RECORDING E-43 RECORDING Turning On Camera Power 1. Slide open the lens cover to turn on power and enter the Record Mode. • Sliding open the lens cover part way initially causes the flash to pop up. Sliding it the rest of the way open turns on camera power and allows the lens to extend from the camera body. Be sure to slide the lens cover open as ...
RECORDING E-44 Using the Shutter Button The following steps describe how to operate the shutter but- ton so that Auto Focus has a chance to focus the image. 1. Press the shutter button about half way. • The Auto Focus feature automatically focuses the im- age. 2. Press the shutter button as far as it will go to record the image. Turning Off Camer ...
RECORDING E-45 Basic Recording Operation The following describes the basic operation for recording images. 1. Slide open the lens cover. 2. After composing the image on the monitor screen, press the shutter button about half way and hold it there. • If you plan to use the viewfinder to compose the im- age, press DISP several times until the monit ...
RECORDING E-46 IMPORTANT! Auto Focus tends not to work well with the following types of subjects. • Solid color walls or objects with little contrast • Strongly backlit objects • Polished metal or other brightly reflective objects • Venetian blinds or other horizontally repeating pat- terns • Multiple images that are varying distances fro ...
RECORDING E-47 Using the Viewfinder for Recording The illustrations below show what you see when you look through the viewfinder to compose an image for recording. The focus range frame indicates the focus range for infinity ( ). As the distance between the camera and the subject decreases, however, the focus range shifts downwards. This is especia ...
RECORDING E-48 Using Focus Lock Normally, Auto Focus automatically focuses on the object that is inside the Auto Focus Frame. Focus lock is a tech- nique that lets you lock the focus on a subject and then move the camera so the Auto Focus Frame is pointed at another subject when you record. This keeps the original subject in focus, even though a di ...
RECORDING E-49 Using the Flash You can use the built-in flash unit to provide illumination dur- ing recording. 1. Slide open the lens cover. 2. Press . • Each press of cycles through the flash mode in the following sequence: Auto On Off Red-eye Reduction. Operation lamp button MENU • The monitor screen goes blank and the operation lamp flashes ...
RECORDING E-50 Flash Indicator When you press the shutter button half way, the flash icon appears on the monitor screen and the Flash lamp light (am- ber) to indicate that the flash will fire when the shutter button is pressed the rest of the way down. IMPORTANT! • Never use the flash in areas where combustible or ex- plosive gas is present. Doin ...
RECORDING E-51 Quality Settings The camera has three quality modes: FINE, NORMAL, ECONOMY. • To determine the number of images that can be stored on a memory card of a different capacity, multiply the capacities in the table below, by the appropriate value. • The actual number of images that can be stored in memory cannot be specified precisely ...
RECORDING E-52 Exposure Compensation This camera features an program AE function that automati- cally changes shutter speed and aperture in accordance with available light. In addition, you can also manually adjust the exposure to compensate for backlighting, indirect indoor lighting, dark backgrounds, and other special conditions. • Press DISP t ...
RECORDING E-53 • The exposure compensation value automatically re- verts to zero whenever the shutter button is pressed. You can manually reset the exposure compensation value by using [ 왘 ] and [ 왗 ] to change the value back to zero, which is indicated when the EV indicator disap- pears from the monitor. EV value is fixed during pan- orama r ...
OTHER RECORDING FUNCTIONS E-54 This section describes more advanced recording operations that are also provided by this camera. • Use the monitor screen for zoom, manual focus, macro, movie, panorama, and multiple exposure. Using Quick Shutter Quick Shutter lets you record up to five images at intervals of approximately 1.5 seconds. Quick Shutter ...
OTHER RECORDING FUNCTIONS E-55 Continuous Recording With continuous recording, you can hold down the shutter button and record up to six images at an interval of about 0.5 seconds. Continuous recording can be used for normal re- cording, as well as in the P, A, S, Night Scene, Landscape, and Portrait modes. 1. Slide open the lens cover. 2. Press ME ...
OTHER RECORDING FUNCTIONS E-56 Using the Zoom Features The zoom features let you move in closer on subjects that are located far from the camera. You can choose either opti- cal zoom or digital zoom, or even use them in combination to increase the size of the original image by 6 times its original size. Using Optical Zoom Optical zoom enlarges the ...
OTHER RECORDING FUNCTIONS E-57 Manual Focus Manual Focus lets you manually adjust the focus of an im- age. 1. Slide open the lens cover. 2. Press a number of times until the MF indicator appears on the monitor screen. • Each press of cycles the focus mode in the following sequence: Auto Focus Manual Focus ( ) Infinity ( ) Macro ( ). 3 . While “ ...
OTHER RECORDING FUNCTIONS E-58 Infinity Mode Recording Use the Infinity Mode when recording images of scenery or objects that are far away. This mode performs Auto Focus in the vicinity of (infinity). 1. Slide open the lens cover. 2. Press a number of times until the indicator appears on the display. • Each press of cycles the focus mode in the f ...
OTHER RECORDING FUNCTIONS E-59 Movie Recording You can record movies that are approximately 30 seconds long. Movies are recorded in 320 x 240-pixel AVI format. For details, see “Using the Record Menus” on page E-71. There are two types of movie recording: PAST and NOR- MAL. PAST lets you capture images of events that occurred before you pressed ...
OTHER RECORDING FUNCTIONS E-60 PAST 1. Slide open the lens cover. 2. Select “Movie Mode” “Past”. • On the advanced menu, select “Functions 2” “Movie Mode” “Past”. 3. Press MODE and then select . 4. Compose the image on the monitor screen and then press the shutter button about half way. • Auto Focus automatically adjusts in ...
OTHER RECORDING FUNCTIONS E-61 IMPORTANT! Flash is disabled during movie recording. NOTE Movie Storage Capacity Panorama Recording With panorama recording you record a series of images and then link them to create a single panoramic effect. 1. Slide open the lens cover. 2. Press MODE and then select . Storage Capacity Approximately 300KB/ second Re ...
OTHER RECORDING FUNCTIONS E-62 3. Compose the image and then record it. • The right edge of the previous image you recorded re- mains on the monitor screen, so you can align it cor- rectly with the next image. • From the second image onwards, aim the camera fur- ther to the right and overlap the next image with the previous one on the monitor s ...
OTHER RECORDING FUNCTIONS E-63 IMPORTANT! • The shutter speed is quite slow in the Night Scene Mode, so you should be sure to use a tripod to hold the camera steady. • Slow shutter speed also causes slow monitor screen refresh. Because of this, the image recorded may be slightly different from the image that was on the moni- tor screen when you ...
OTHER RECORDING FUNCTIONS E-64 Monochrome and Sepia Recording Use the following procedure to record an image in mono- chrome (black and white) or sepia. Note that you cannot con- vert an image to color after recording it in monochrome or sepia. 1. Slide open the lens cover. 2. Press MENU. 3. Use [ 왘 ], [ 왗 ], [ 왔 ] and [ 왖 ] to select “Co ...
OTHER RECORDING FUNCTIONS E-65 Portrait Recording In the Portrait Mode, focus is adjusted so the background is slightly blurred, which highlights the subject in the fore- ground. • You can further blur the background by moving the ZOOM slider to T (telephoto) while shooting with the Portrait Mode. 1. Slide open the lens cover. 2. Press MODE and t ...
OTHER RECORDING FUNCTIONS E-66 2. Press / . • Each press of / cycles the self-timer in the se- quence: 10SEC 2SEC Off. 3. Compose the image and then record it. • The Self-timer Lamp flashes with the passage of each second. • In the case of 10-second recording, the monitor screen turns off as soon as the self-timer countdown starts. The monito ...
OTHER RECORDING FUNCTIONS E-67 • Adjust the aperture setting to compensate for the relative brightness or darkness of the subject you are recording. 1. Slide open the lens cover. 2. Press MODE and then select . Aperture Priority Image Recording You can fix the aperture within the range of F2.0 to F11. A larger aperture (indicated by a smaller ape ...
OTHER RECORDING FUNCTIONS E-68 Performing Manual White Balance Certain lighting conditions can cause auto white balance to take a very long time or can result in a limitation of the ad- justable range (color temperature). If you suspect your cur- rent lighting conditions are causing problems, try performing manual white balance. This sets white bal ...
OTHER RECORDING FUNCTIONS E-69 Recording Mode Power On Settings A power on setting is one that is set by the camera automati- cally whenever you turn it on. Normally, the camera uses its own built-in power on default settings. The following table shows the items whose settings you can save in mode memory. Note that the procedure described here only ...
OTHER RECORDING FUNCTIONS E-70 Turning power on default settings on and off 1. Slide open the lens cover. 2. Press MENU. 3. Select “Options”. 4. Select “Mode 1” or “Mode 2”. 5. Select “Mode 1” or “Mode 2”. 6. Select the item whose setting you want to change. 7. Select “On” or “Off”. • Repeat steps 6 and 7 for other ite ...
OTHER RECORDING FUNCTIONS E-71 • An item that is “On” stores its current setting in mode memory when camera power is turned off, and restores the setting when power is turned back on again. • An item that is “Off” uses the camera’s preset power on default setting. Item Initialized Setting Power Save Sleep 1 min Auto Power Off 2 min Mo ...
OTHER RECORDING FUNCTIONS E-72 Picture Quality BASIC Size BASIC Sharpness Saturation Contrast Use this setting to control the quality of the image. Fine / Normal / Economy You can specify either of two image sizes in pixels. 1600 x 1200 / 800 x 600 This setting specifies the sharpness of image out- lines. Hard : Sharp outlines Normal Soft : Soft ou ...
OTHER RECORDING FUNCTIONS E-73 Functions 2 Movie Mode BASIC Digital Zoom BASIC Color BASIC Select the movie mode you want to use. Normal / Past This item fixes digital zoom at the setting you want. Off / On Use this setting to select the color mode you want. Color / B/W / Sepia Use this setting to select the white balance setting that makes the col ...
OTHER RECORDING FUNCTIONS E-74 Card Browser BASIC Format BASIC Date BASIC Video Out BASIC Language BASIC Beep BASIC Use this item to select the card browser file type. Off / Type1 / Type2 / Type3 / Type4 Select this item to format a memory card. No / Yes Use this item to specify the format of the date that appears in the monitor screen, and to adju ...
PLAYBACK E-75 PLAYBACK The following describes the different techniques that you can use to playback recorded images. Basic Playback Operation The built-in monitor screen of the camera lets you play back recorded images without connecting an external monitor. 1. Press PLAY ON/OFF. 2. Use [ 왘 ] and [ 왗 ] to scroll through the images stored in ca ...
PLAYBACK E-76 • To enlarge the movie image so it fills the entire moni- tor screen, press DISP. Pressing the DISP again re- turns the image to its original small size. • Pressing SET during movie play pauses playback. Press SET again to resume playback. • While movie playback is paused, you can use [ 왘 ] (for- ward) and [ 왗 ] (reverse) to ...
PLAYBACK E-77 • Pressing DISP changes to a small-image display. Press DISP again to return to the full-screen size. • Pressing SET during panorama play pauses play- back. Press SET again to resume playback. • While panorama playback is paused, you can use [ 왘 ] (forward) and [ 왗 ] (reverse) to move frame-by-frame through the panorama. 4. ...
PLAYBACK E-78 Using Zoom The following operation lets you magnify an image to twice and a half its normal size. Note that you can zoom only a single still image. IMPORTANT! Movie and panorama images cannot be zoomed. 1. Press PLAY ON/OFF. 2. Use [ 왘 ] and [ 왗 ] to select the image you want to zoom. 3. Press MENU. 4. Select “Zoom”. • On th ...
PLAYBACK E-79 1. Press PLAY ON/OFF. 2. Press MENU. 3. Select “9 Multi”. • On the advanced menu, select “View” “9 Multi”. • The first image of the set is the image that was on the screen when you performed step 2 of this operation. The other images are those that sequentially follow the first one. Displaying Nine Images The following ...
PLAYBACK E-80 IMPORTANT! Auto Power Off (page E-38) is disabled whenever Slide Show is being used. This means you should not leave Slide Show running when using batteries to power the camera. Doing so can rundown batteries. Be sure to stop Slide Show and turn off the camera after you are finished. Slide Show Slide Show automatically scrolls through ...
PLAYBACK E-81 Screen Saver The screen saver function automatically activates Slide Show (which automatically scrolls through images) when- ever you do not perform any operation for about five minutes in the Playback Mode. This protects the camera’s monitor screen and the screen of a connected TV against “burn in” of a static image that is lef ...
PLAYBACK E-82 Zoom BASIC 9 Multi BASIC Slide Show BASIC View Enlarges the image on the monitor screen. Displays nine images on the monitor screen. Automatically scrolls through the images one- by-one. Using the Playback Menus The playback menus provide you with control over the dis- play format and DPOF settings, image delete and save op- erations, ...
PLAYBACK E-83 Set Up This item can be used to specify the format of the video output signal. NTSC : Video format in the United States and Japan PAL : Video format in Europe and other areas This setting lets you select either English or Japanese as the display language. Use this item to turn the key input confirmation tone off and on. Deletes a sing ...
FOLDER TYPES E-84 Memory Card Folder Precautions The camera automatically creates folders (directories) on the memory card and assigns them names based on dates (month and day). Any image you record is automatically stored into the folder that corresponds to the date it is re- corded. • Up to 900 folders can be created on a single card. The fol- ...
FOLDER TYPES E-85 Selecting a Folder for Playback 1. Press PLAY ON/OFF. 2. Press / . 3. Use [ 왘 ] and [ 왗 ] to select the folder you want to select for playback. 4. Press SET to playback the first image in the folder. ...
IMAGE PROTECTION E-86 4. Select the image you want to protect. • Selected images are indicated by . • Repeat step 4 to select other images if you want. 5. After all the images you want to protect are selected, press DISP to protect them. Use the following operations when you want to protect im- ages against accidental deletion. A protected imag ...
IMAGE PROTECTION E-87 Protecting and Unprotecting Folders 1. Press PLAY ON/OFF. 2. Press / . 3. Use [ 왘 ] and [ 왗 ] to select the folder you want to protect. 4. Press SET. 5. Press MENU. 6. Select “Tools” “Protect” “Folder”. • “Tools” appears on the advanced menu only. 7. Select “Protect” or “Unprotect”. • The indica ...
DELETING IMAGES E-88 DELETING IMAGES Deleting a Single Image 1. Press PLAY ON/OFF. 2. Press MENU. 3. Select “Delete” “Select”. 4. Select the image you want to delete. • Protected images are not displayed. • Note that the first time you display an image its icon is turned on. 5. Press [ 왔 ] or [ 왖 ] to toggle the mark of the selected ...
DELETING IMAGES E-89 12 3 4 12 3 Deleting All the Images in a Folder 1. Press PLAY ON/OFF. 2. Press / . 3. Use [ 왘 ] and [ 왗 ] to select the folder you want to delete. 4. Press SET. 5. Press MENU. 6. Select “Delete” “Folder”. 6. After all the images you want to delete are se- lected, press SET to delete them. • Deleting a panorama del ...
DELETING IMAGES E-90 Deleting All Unprotected Images 1. Press PLAY ON/OFF. 2. Press MENU. 3. Select “Delete” “All”. 4. Select “Yes” to delete all unprotected images, or “No” to abort the delete operation without deleting anything. • When the above procedure is performed while there are protected images in memory, the first of the ...
DPOF E-91 Printing Specific Images 1. Press PLAY ON/OFF. 2. Press MENU. 3. Select “DPOF” “Select”. • On the advanced menu, select “Tools” “DPOF”. 4. Use [ 왘 ] and [ 왗 ] to select the image you want to print. 5. Press [ 왔 ] or [ 왖 ] to toggle the mark on (print) or off (do not print). DPOF The letters “DPOF” stand for ? ...
DPOF E-92 6. Use [ 왔 ] and [ 왖 ] to specify the number of cop- ies you want to print. • If you want to specify more images for printing, repeat steps 4 through 6. • If you change your mind about printing an image, press [ 왔 ] to clear its mark. 7. After you are finished, press SET to exit the im- age specification procedure. Printing All ...
DPOF E-93 8. Use [ 왔 ] and [ 왖 ] to specify the number of cop- ies of each image you want to print. 9. After you are finished, press SET to exit the im- age specification procedure. Printing All Images 1. Press PLAY ON/OFF. 2. Press MENU. 3. Select “DPOF” “All” “Set print order”. • On the advanced menu, select “Tools” “DPOF? ...
CONNECTIONS E-94 CONNECTIONS This camera is equipped with a VIDEO OUT terminal for connection to a television or video deck, and a DIGITAL ter- minal and USB port for connection to a computer or other equipment. Computer E-96 Television E-95 1 Cables The type of cable you should use depends on the type of equipment to which you are connecting. 2 Sp ...
CONNECTING TO OTHER EQUIPMENT E-95 CONNECTING TO OTHER EQUIPMENT Connecting to a Television Images being displayed on the camera’s monitor screen, whether for recording or playback can also be displayed on the screen of a connected television. CONNECTING TO OTHER EQUIPMENT 1. Connect one end of the video cable to the cam- era and the other end to ...
CONNECTING TO OTHER EQUIPMENT E-96 Connecting to a Computer The following accessories are included with the camera to make it easy for you to connect to a computer to transfer and manage your images. • USB cable • USB driver software (on CD-ROM) • Data Transfer Cable • Photo Loader application (on CD-ROM) USB Port Connections The camera’s ...
CONNECTING TO OTHER EQUIPMENT E-97 CONNECTING TO OTHER EQUIPMENT USB Port Connection IMPORTANT! • Whenever connecting the USB cable to the camera, make sure the arrow mark on the plug is aligned prop- erly with the arrow mark on the side of the camera’s terminal. • Plug the USB connectors into the ports as far as they will go. Incorrect conne ...
CONNECTING TO OTHER EQUIPMENT E-98 Macintosh Connection of the Data Transfer Cable and operation of the Photo Loader application is not supported on an Apple Macintosh. IMPORTANT! • See the documentation that comes with Photo Loader for information about system requirements. • Be sure to turn off the camera, computer, and all pe- ripherals (mon ...
INFRARED DATA TRANSFER E-99 INFRARED DATA TRANSFER This camera can perform IrDA data communication with digi- tal equipment that supports IrTran-P protocol. Infrared data transfer capabilities let you exchange image data with another digital camera without physical connec- tion. • This camera uses IrDA IrTran-P protocol, which was jointly develop ...
INFRARED DATA TRANSFER E-100 E-100 4. Align the infrared port of the receiving device that supports IrTran-P protocol. • Position the cameras so they are 10cm to 30cm apart from each other. • To cancel an image data send operation, press MENU. Sending Data Transferring a movie or panorama to another model QV Digi- tal Camera (other than the QV- ...
INFRARED DATA TRANSFER E-101 Infrared Data Transfer Precautions • Make sure that the infrared ports of the sending unit and the receiving unit are pointed straight at each other, and that there is nothing blocking the path between them. • To avoid problems that occur due to sudden loss of battery power during infrared image transfer, we recomme ...
USING CompactFlash CARDS WITH YOUR COMPUTER E-102 USING CompactFlash CARDS WITH YOUR COMPUTER Setting Up to Access CompactFlash Card Contents From Your Computer You can use any of the three methods described below to access the contents of a memory card with your computer. You can use the Photo Loader software to save images on the memory card to y ...
USING COMPACTFLASH CARDS WITH YOUR COMPUTER E-103 Memory Card Data Images recorded with this camera and other data is stored on the memory card using DCF (Design Rule for Camera File System) protocol. DCF protocol is designed to make it easier to exchange image and other data between digital cameras and other devices. DCF Protocol DCF devices (digi ...
USING CompactFlash CARDS WITH YOUR COMPUTER E-104 Image Files Supported by the Camera • Image files recorded with the CASIO QV-2000UX/Ir Digital Camera • JPEG files stored using Photo Loader (1600 x 1200 pixels or 800 x 600 pixels JPEG file) • DCF protocol image files Folder and File Contents • Parent Folder Contents: All files used by the ...
USING COMPACTFLASH CARDS WITH YOUR COMPUTER E-105 Personal Computer • This camera uses management files to manage the se- quence and attributes of image files. Because of this, add- ing files, deleting files, changing management file con- tents, or changing file sequence and attributes with your computer can cause panorama images to become ungrou ...
USING CompactFlash CARDS WITH YOUR COMPUTER E-106 3. Specify the format. There are four Card Browser formats. Type1 ........ This is a powerful format that provides de- tailed information about each image and also includes a Slide Show feature. Type2 ........ This format is a viewer with a Slide Show feature. Type3 ........ This format shows inform ...
USING COMPACTFLASH CARDS WITH YOUR COMPUTER E-107 IMPORTANT! • Though the camera’s monitor screen goes blank when you turn off power, the operation lamp continues to flash for some time as the camera internally generates a Card Browser file (when Card Browser is turned on). Performing any of the operations while the operation lamp is flashing n ...
USING CompactFlash CARDS WITH YOUR COMPUTER E-108 Image File name Folder name How to use the HTML file Viewing HTML File Contents Load the CompactFlash card into a card slot of your com- puter (page E-102). Now drop the INDEX.HTM file (in the DCIM folder) onto your Web browser to display a list of all images contained on the CompactFlash card. For ...
USING COMPACTFLASH CARDS WITH YOUR COMPUTER E-109 Function Descriptions Index Screen Data Screen Actual Size (in pixels) VGA Size SXGA Size When the computer accesses the memory card, it opens the INDEX.HTM file in the DCIM folder and displays an index of folders, with the newest one first. Clicking the INDEX button under a folder name in the left ...
USING CompactFlash CARDS WITH YOUR COMPUTER E-110 Saving an HTML File • You can use the Photo Loader application that comes bundled with the camera to easily save the images in the HTML file to a computer. See the documentation that comes with Photo Loader for details. • Before using the CompactFlash card again (after storing its images on othe ...
TROUBLESHOOTING E-111 1. Batteries not loaded correctly. 2. Dead batteries 3. Wrong AC adaptor 4. Lens cover is not completely open. 1. Auto Power Off 2. Low battery power 3. Use of manganese batteries. Batteries are about to go dead. 1. The lens cover is closed. 2. Flash unit is charging. 3. The message “MEMORY FULL” is on the moni- tor screen ...
TROUBLESHOOTING E-112 The recorded image is out of focus. Power failure during self- timer operation Monitor screen image is out of focus. Viewfinder image is dim. Poor color and brightness when indoors Cannot perform movie re- cording. Recorded image is not saved. Make sure the subject you want to focus is within the Auto Focus Frame when you reco ...
TROUBLESHOOTING E-113 Colors of recorded image are different from those on the display when image was composed. No [ 왘 ]/[ 왗 ] button operation during nine-page display Cannot find an image. Camera is connected to a TV, but LCD monitor con- tents do not appear on TV screen. Images cannot be displayed when downloaded back the camera from a compu ...
TROUBLESHOOTING E-114 Select a different function or change to the Record Mode. Remove batteries and disconnect the AC adaptor if you are using one. Restore power and turn the camera on. If this does not work, contact your dealer or an authorized CASIO service provider. Turn off screen saver (page E-81). 1. Exit the Sleep state. 2. After the commun ...
MESSAGES E-115 MEMORY FULL Change quality or delete unneeded images. MEMORY FULL Delete unneeded images. NO FORMAT 3. Use [ 왔 ] and [ 왖 ] to select “Yes”, and then press SET. • Select MENU if you want to abort the reformat procedure without deleting anything. • Completion of the format operation is indicated by the message “NO IMAGE? ...
MESSAGES E-116 RECORD ERROR REPLACE BATTERY! There are no images on this memory card! This camera cannot display the image you selected! This message appears when the image you are try- ing to record cannot be compressed for some rea- son. Try changing the angle of the camera to the subject. Battery power is low. Camera power turns off automaticall ...
SPECIFICATIONS E-117 SPECIFICATIONS Lens .................................... F2.0 to 2.8; f = 6.5 to 19.5mm (equiva- lent to 36 to 108mm lens for 35mm film) Zoom ................................... Optical zoom, 3X; Digital zoom: 6X (in combination with optical zoom) Image size is 800 x 600 pixels when digital zoom is used. Focusing .............. ...
SPECIFICATIONS E-118 Recording Functions ........ One-shot, self-timer, movie, panorama, continuous, quick, macro, landscape, night scene, portrait Monitor ................................ 1.8" TFT, low-glare color HAST LCD (122,100 pixels, 555 x 220) Viewfinder .......................... LCD Monitor or optical viewfinder Clock ............... ...
SPECIFICATIONS E-119 • This camera does not have a separate battery to power its clock. Clock settings are cleared whenever power to the camera is cut off (by batteries going dead while the camera is not connected to an AC power outlet with the AC adaptor) for about 24 hours. After power is resumed, either by loading fresh batteries or connecting ...
Casio QV-2000UX/Irのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- QV-2000UX/Irの取扱説明書
- Casioの製品カード
- パンフレット
- またはCasio QV-2000UX/Irの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Casio QV-2000UX/Irの取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Casio QV-2000UX/Irの取り付け説明書、サービスマニュアル、簡易説明書、またはCasio QV-2000UX/Irのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Casio QV-2000UX/Irの製品を使用するにあたって最も人気のある説明書を閲覧できます。
Casio QV-2000UX/Irデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCasio QV-2000UX/Irを使用するのを助ける技術的文書のことです。説明書は通常、全てのCasio QV-2000UX/Irユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Casioの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Casio QV-2000UX/Irの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCasio QV-2000UX/Irの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Casio QV-2000UX/Irに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Casio QV-2000UX/Irデバイスの基本機能を使うにあたってのヒント。 Casio QV-2000UX/Irのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Casio QV-2000UX/Irに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCasio QV-2000UX/Irのメーカー/サービスへの連絡先に関する情報。
Casio QV-2000UX/Irについてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもCasio QV-2000UX/Irの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCasio QV-2000UX/Irで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。