ページに移動 of 81
V ideo Camcorder Models Pro867/Pro870 Owner ’ s Manual Product Registration .......Inside Front Cover Safety Precautions ...................................i-vii Optional Accessories ................................1-7 • Accessory Order Form ............................5-7 First-Time Operation .............................8-15 Remote Control .. ...
V ideo Camcorder Owner ’ s Manual Models Pro867 Pro870 ® Product Registration .......Inside Front Cover Safety Precautions ...................................i-vii Optional Accessories ................................1-7 • Accessory Order Form ............................5-7 First-Time Operation .............................8-15 Remote Control ...
i Pr oduct Registration Mail Y our Registration Card T oday A Product Registration Card is packed with your camcorder. Please fill out the card and return it immediately. Your prompt submission of this card confirms your right to the protection available under the terms and conditions of the warranty and also allows us to contact you should it ever ...
ii Your video camcorder’s AC adapter/charger will operate on 100-240 volts AC, 50/60 Hz, and has a polarized plug. Because one blade of the plug is wider than the other, the plug fits in the wall socket only one way. Do not defeat the safety feature of this plug. If you need an extension cord, use a polarized extension cord. CAUTION: TO PREVENT E ...
iii Before using the AC adapter/charger, read all instructions and cautionary markings on (1) AC adapter/charger, (2) battery, and (3) product using battery. Caution: To reduce risk of injury, charge only rechargeable batteries type BB060, or BB120. Other types of batteries may burst causing personal injury and damage. Do not expose the adapter/cha ...
iv In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. However , safety is your responsibility too. These pages list important information that will help to assure your enjoyment and proper use of a camcorder , adapter/charger , and a ...
v 8. Ventilation— Slots and openings in the video products are provided for ventilation to ensure reliable operation of the video product and to protect them from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video p ...
vi 12. Outdoor Antenna Grounding— If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, ...
vii 16. Lightning— For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power line surges. Service 17. Servicing— Do not ...
Optional Accessories 1 We invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your 8mm camcorder. These pages have a selection of accessories to help make your memorable moments look and sound even better. These accessories are designed to make the process of recording and watching your videos more e ...
Optional Accessories (continued) 2 DCC80 DC Car Cord Adapter/Charger This DC car cord adapter/charger enables you to operate your camcorder from your car, truck, or RV by plugging the DCC80 directly into the vehicle’s cigarette lighter socket. It will also charge the BB060 battery supplied with your camcorder or the BB120 (long play) battery. The ...
Optional Accessories (continued) 3 VCC1000 Video Color Control Center The VCC1000 is actually two accessories in one. The color control center allows you to adjust the color intensity, tint, white balance, and sharpness of tapes being dubbed. This is especially helpful when the original tape was produced in poor lighting conditions or poor color se ...
Optional Accessories (continued) 4 AC035 Super Lightweight Tripod This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick- release mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section leg design folds down to 23-1/2" when not in use and weighs only 3-1/2 lbs. Rubber feet allow for sure ...
5 Accessory Order Form Detach Here ✂ Please complete other side also Order Form for Camcorder Model Pro867 or Pro870 Description Part No. Price Qty. Total Carrying Case ACB065 $ 27.95 Soft Camcorder Case AC025A $ 59.95 Super Lightweight Tripod AC035 $ 69.95 Monopod AC036 $ 39.95 75-300 Cable Transformer AH011 $ 1.90 Rechargeable Battery BB060 $ 5 ...
6 Accessory Order Form (continued) Detach Here ✂ ® r r s TM Charge your order on your VISA or MasterCard by filling in below USE YOUR CREDIT CARD IMPORTANT: Copy complete account number from your VISA card IMPORTANT: Copy complete account number from your MasterCard My card expires: My card expires: Copy Number above your name on MasterCard AUTH ...
7 Accessory Order Form (continued) To order accessories, contact your local Dealer. If a dealer is not nearby, you can also follow the directions below to order by telephone or direct-by-mail. United States Orders To place your order by phone, have your Visa or MasterCard ready and call the toll-free number listed below between 8AM and 8PM Eastern ...
First-T ime Operation 8 You have selected a precision-engineered camcorder designed to give you years of performance and enjoyment. Although your camcorder is very simple to use, it is important that you read and carefully follow the instructions in this manual until you are completely familiar with the proper operating procedures. If you should ex ...
First-T ime Operation (continued) 9 2. Attach a power supply to the camcorder . Attach a power supply to the camcorder–either the adapter/charger or charged battery. Adapter/Charger: Connect the power connector’s small plug into the DC OUTPUT jack on the adapter/ charger. Align the reference arrow on the power connector with the arrow on the ca ...
First-T ime Operation (continued) 10 5. Place the ON/POWERSA VE lever in the ON position. The camcorder also has an ON/POWERSAVE lever to conserve battery power when recording. • During recording, place the ON/POWERSAVE lever in the ON position. The camcorder will not record unless this lever is in the ON position. • Place the ON/POWERSAVE leve ...
First-T ime Operation (continued) 11 8. Adjust the eyepiece focus contr ol for your vision. If the image in the viewfinder is blurry, adjust the eyepiece focus control for your vision. Details are on page 34. 9. Start and stop r ecording. Start and stop recording by pressing and releasing the thumb trigger. You do not have to hold the thumb trigger ...
First-T ime Operation (continued) 12 1 1. Review all the camcorder ’ s operating contr ols. The page number(s) where detailed information on each control can be found are listed for your convenience. RESET DISPLAY POWER TITLE SEL EDIT–ADV REW PLAY F.FWD STOP PAUSE OFF VCR CAMERA EJECT + — W T BATTERY FULL AUTO SHUTTER DATE TITLER FOCUS OFF ? ...
First-T ime Operation (continued) 13 POWERSAVE . . ON W T BATTERY PAUSE STOP REW PLAY F.FWD POWER REVIEW DO NOT PUSH Cassette Door (page 27) Attach a Power Supply Here: Adapter/ Charger, Charged Battery, or Optional DC Car Cord (pages 20-25) Shoulder Strap Attachment Ring (page 57) Shoulder Strap Attachment Ring (page 57) Clock Battery Compartment ...
RESET DISPLAY POWER TITLE SEL EDIT–ADV REW PLAY F.FWD STOP PAUSE OFF VCR CAMERA EJECT + — W T W T W T BATTERY FULL AUTO SHUTTER DATE TITLER FOCUS OFF • • ON DO NOT PUSH REVIEW FADE W T EJECT CAMERA OFF VCR POWER – TITLE SEL + REVIEW REW PLAY F.FWD EDIT–ADV STOP PAUSE BATTERY First-T ime Operation (continued) 14 EJECT Button (pages 10, 2 ...
First-T ime Operation (continued) 15 RESET DISPLAY POWER TITLE SEL EDIT–ADV REW PLAY F.FWD STOP PAUSE OFF VCR CAMERA EJECT + — W T BATTERY FULL AUTO SHUTTER DATE TITLER FOCUS OFF • • ON DO NOT PUSH REVIEW FADE FOCUS TITLER DATE FULL AUTO OFF • • ON SHUTTER RESET DISPLAY FOCUS Button (pages 36-37) SHUTTER Button (pages 38-39, 40-41) RESE ...
Remote Contr ol 16 1. Turn the remote control over, and pull on the tab to remove the battery holder. 2. Insert the battery so that its positive (+) terminal faces up. 3. Replace the battery holder in the remote control. Notes: Never place anything heavy on top of the remote control or lay it upside-down. This may accidentally depress the buttons f ...
Remote Contr ol (continued) 17 The remote control operates the camcorder by infrared light, so it is protected from electrical and sound interference. However, the remote control must be aimed directly at the camcorder’s remote control sensor. There cannot be any obstructions between them. Note: The camcorder may not respond to the remote control ...
Remote Contr ol (continued) 18 A brief description of the functions of the remote control buttons is given here. They perform the same function as the corresponding controls on your camcorder. You can use whichever is more convenient at the time. Note: An RCA VCR that is set to respond to the VCR 2 button on the VCR’s remote control may respond t ...
Remote Contr ol (continued) 19 3 A/V (Audio/Video) DUB Button • This button is used to record new audio and video in place of existing audio and video on a recorded tape. Details are on pages 52-53. 4 DISPLAY Button • Press this button to display the battery level indicator, time counter or time-remaining display in the viewfinder. Details are ...
Powering Y our Camcorder 20 The adapter/charger’s power connector attaches to the camcorder, and lets you power your camcorder directly from standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery. You may need a plug adapte ...
Powering Y our Camcorder (continued) 21 Charging the Battery If the power connector is attached to the adapter/charger, remove its plug. 1. Align the reference arrow on the battery with the arrow on the adapter/charger. 2. Hold the battery flush against the adapter/charger and slide it in the direction of the arrow. 3. Plug the adapter/charger into ...
Powering Y our Camcorder (continued) 22 Attaching the Charged Battery to the Camcorder If the power connector is attached to the camcorder, remove it before attaching the battery. 1. Align the reference arrow on the battery with the arrow on the back of the camcorder. 2. Hold the battery flush against the camcorder and slide it in the direction of ...
Checking Battery Power (Battery Level Indicator) The battery level indicator in the camcorder’s viewfinder shows how much recording time is left on the battery. Press the DISPLAY button on the camcorder to display the battery level indicator in the viewfinder. The battery level indicator will not be recorded on the tape when it appears in the vie ...
Powering Y our Camcorder (continued) 24 1. If the battery is attached to the camcorder, remove it. 2. Align the reference arrow on the power connector with the arrow on the camcorder. 3. Hold the power connector flush against the back of the camcorder and slide it to the right in the direction of the arrow as shown. 4. Insert the power connectors? ...
Powering Y our Camcorder (continued) 25 1. If the battery is attached to the camcorder, remove it. 2. Align the reference arrow on the power connector with the arrow on the camcorder. 3. Hold the power connector flush against the back of the camcorder and slide it to the right in the direction of the arrow as shown. 4. Insert the power connector’ ...
RCA V ideo Cassettes 26 You can use your video cassettes over and over again. To erase a previous recording, just record over it. B. A. To Prevent Erasure— Close Record- Protect Tab (Expose Red) To Record Again—Open Record-Protect Tab (Red Disappears) 8 Record- Protect Tab Use of poor quality tapes or tapes that have been damaged or mishandled ...
RCA V ideo Cassettes (continued) 27 1. Attach a power supply to the camcorder, and slide and release the EJECT button to open the cassette compartment. 2. Insert or remove the cassette. Cassette Car e and Storage • When you are finished with a cassette, rewind it, and remove it from the camcorder. • When you are finished recording, close the ca ...
Detailed Recording Steps 28 1 Attach a power source to the camcorder. Detailed Instructions for attaching the adapter/charger, battery, or optional DC car cords are on pages 20-25 . 2 Prepare the camcorder to record. A. Press and hold the small button on the POWER switch while sliding it to the CAMERA position. B. Insert a cassette. 1. Slide and re ...
Detailed Recording Steps (continued) 29 E. If the picture in the viewfinder is blurry, adjust the eyepiece focus control. 3 Start Recording A. Place the ON/POWERSAVE lever in the ON position. The camcorder will not record if this lever is in the POWERSAVE position. B. Press the camcorder’ s thumb trigger to start and stop recording. You do not ha ...
Special Featur es 30 Flying Erase Head A separate erase head is mounted on the spinning headwheel (hence the term “flying”). This allows you to make clean edits without the “glitches” or “rainbow noise” that may occur at the beginning and end of each recording. Microphone The microphone picks up the sound during a recording. It is more ...
Special Featur es (continued) 31 Edit Search The edit search feature allows you to use the F.FWD (fast forward), REW (rewind), and PLAY buttons on the camcorder (or remote) control to precisely position the tape while the camcorder is in the record-pause mode. • Press and hold the REW (rewind) button to visually search the recorded tape in revers ...
Date and T ime Display 32 1. Locate the CLOCK BATTERY compartment on the back of the camcorder. 2. Pull the tab to the side to open the cover and expose the clock battery compartment. 3. Insert the clock battery with the “+” terminal facing out (as illustrated inside the battery compartment cover) . 4. Gently push the cover closed until it snap ...
Date and T ime Display (continued) 33 6. Repeat steps 4 and 5 until you have entered the correct month, day, year, hour, minute, and AM or PM. 7. After you select AM or PM, press the STOP button again to remove the flashing cursor from the viewfinder and start the camcorder’s internal clock. Corr ecting the Date or T ime To correct the date or ti ...
Electr onic V iewfinder 34 The camcorder’s electronic viewfinder (EVF) is a miniature black-and-white monitor that displays the picture seen by Eyepiece Focus Contr ol The eyepiece focus control lets you set the focus of the viewfinder for your personal vision. If you wear eyeglasses, you can probably operate the camcorder without them. It’s ea ...
Fading In and Out of Scenes 35 You can add a professional touch to your recordings when you fade in and out of scenes. Both the picture and sound will gradually appear or disappear. The speed of the fade is automatically controlled by the camcorder. RESET DISPLAY POWER TITLE SEL EDIT–ADV REW PLAY F.FWD STOP PAUSE OFF VCR CAMERA EJECT + — W T BA ...
Focusing Y our Camcorder 36 Auto Focus If you want the camcorder to focus for you automatically, place the FULL AUTO OFF/ON switch in the ON position. The camcorder’s auto-focus system sends out an infrared light beam and automatically focuses on the nearest object that reflects this light. Take care not to block the camcorder’s auto-focus wind ...
Focusing Y our Camcorder (continued) 37 The following conditions may require the use of manual focusing during recording. • When using the optional wide-angle or telephoto lens adapters, turn off the auto-focus system and focus manually. • Sloping or inclined surfaces may not be focused because the reflected light will not be returned to the au ...
Using V ariable Shutter Speeds 38 Because your camcorder has a variable shutter, you can choose AE (automatic exposure) or one of six shutter speeds (1/60, 1/120, 1/250, 1/1000, 1/2000, and 1/10000 second). The POWER switch must be in the CAMERA position. When the AE (automatic) shutter speed is selected, the camcorder automatically selects a shutt ...
Using V ariable Shutter Speeds (continued) 39 FULL AUT O OFF/ON Switch ON • When the FULL AUTO OFF/ON switch is in the ON position, the camcorder automatically selects the shutter speed of 1/60 second. FULL AUTO appears in the viewfinder when you press the DISPLAY button. • When the FULL AUTO OFF/ON switch is in the ON position, you can still s ...
Displays in V iewfinder 40 The camcorder has several displays in the viewfinder that tell what the camcorder is doing, and aid in the ease of operation. 1 FULL AUTO or Shutter Speed Display When you press the DISPLAY button to display the battery level indicator, time counter, or time-remaining display, these displays appear in the viewfinder. They ...
Displays in V iewfinder (continued) 41 • When the FULL AUTO OFF/ON switch is in the OFF position, AE (automatic exposure) or the shutter speed ( S:120 , S:250 , S:1000 , S:2000 , or S:10000 ) selected with the SHUTTER button appears. No shutter speed display appears when the normal (1/60 second) speed is selected. Details are on pages 38-39. 2 NO ...
Displays in V iewfinder (continued) 42 6 Pro870 Only: Zoom Displays Repeatedly press the ZOOM MODE button to select one of the digital zooming modes. The mode selected will appear in the viewfinder. This display will not be recorded on the tape when it appears in the viewfinder. Press one of the power zoom buttons ( W or T ) to control the size of ...
Displays in V iewfinder (continued) 43 7 Tape Display for Time-Remaining Display Press the DISPLAY button to display the time-remaining display. Then press the RESET button to display the size tape you are using in the camcorder. This display will not be recorded on the tape when it appears in the viewfinder. • Display 15 in the viewfinder when y ...
2. Locate the place on the tape you want to return to, and press the RESET button to set the time counter to “0:00:00 M ”. 3. Continue to record or play the tape. When you want to return to the place you marked, press the thumb trigger to stop recording, or the STOP button to stop playing back the tape. 4. Make sure the CAMERA/OFF/VCR switch is ...
2. If the correct tape display does not appear for your size of tape, press the RESET button repeatedly until the correct tape size is displayed. For example, if you are using a 60-minute cassette, the tape display should be 60. The display will remain blank until the camcorder has finished its calculations. When you first start playing or recordin ...
Zooming 46 W T Manual Zoom Ring Lever Power Zoom Buttons T = Telephoto W = Wide Angle FADE RESET DISPLAY POWER TITLE SEL EDIT–ADV REW PLAY F.FWD STOP PAUSE OFF VCR CAMERA EJECT + — W T BATTERY FULL AUTO SHUTTER DATE TITLER FOCUS OFF ON REVIEW ZOOM MODE Button ZM:2 (Pro870 Only) Digital Zoom Display in Viewfinder (Pro870 Only) ZOOM MODE Button U ...
Zooming (continued) 47 • ZM:2 16X9 is used to change the recording format. ZM:2 16X9 is explained below. 2. Press one of the power zoom buttons ( W or T ) to control the digital zoom ratio. Notes: When you zoom in the close-up direction above eight times, the zoom ratio display ( X8–X64 ) appears with the zoom mode display. Digital zoom above 1 ...
T itler 48 The camcorder ’ s built-in titler can store two dif ferent title pages in memory . Each title page can be displayed and recorded at any time. The built-in character register contains over 40 dif ferent characters for creating titles with up to 32 characters on two lines. Cr eating a T itle 1. Attach a power source to the camcorder, and ...
T itler (continued) 49 Chart of Characters in T itler’ s Register A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ? ’ . / , - ; : < > ! (Blank) Recording T itles on a T ape in the Camcorder 1. Attach a power source to the camcorder, and slide the POWER switch to the CAMERA position. Place the ON/POWERSAVE lever in ...
Synchr o Edit 50 Synchro edit allows your camcorder to control a VCR (one that has a compatible P AUSE , EDIT , EDIT IN/OUT , or SYNC jack) while tapes are being copied from the camcorder to the VCR. This is convenient when you want to copy only selected segments from a previously recorded tape. An optional A VS80 synchro edit cable shown on page 3 ...
Synchr o Edit (continued) 51 T o Synchro Edit 1. Connect your camcorder to a compatible VCR as shown. 2. Prepare the camcorder to play back the tape you want to copy. • Slide the POWER switch to the VCR position. • Press the EJECT button, and insert the tape you want to copy. • Press the PLAY button. • Press the PAUSE button to place the ca ...
Audio/V ideo Dubbing 52 The A/V (audio/video) DUB button on the remote control lets you record new audio and video from another VCR or camcorder to a previously recorded tape in the camcorder . Y ou will need an optional V AA009 audio/video input cable shown on page 3. Notes: The source for audio and video when dubbing is the signal coming through ...
Audio/V ideo Dubbing (continued) 53 1. Slide the camcorder’s POWER switch to the VCR position. 2. Insert the tape you want to dub on, press the PLAY button, and locate a place on the tape a few seconds before where you want the dubbing to begin. 3. Press the PAUSE button exactly where you want to begin dubbing to place the camcorder in the play-p ...
Recording on Camcorder fr om VCR or TV Monitor 54 AUDIO OUT VIDEO OUT Back of Mono VCR or TV Monitor White Audio Plug Yellow Video Plug Optional VAA009 Audio/Video Input Cable AUDIO OUT VIDEO OUT L R Yellow Video Plug White Audio Plug Y-Adapter (available from electronics supply store) Optional VAA009 Audio/Video Input Cable or Back of Stereo VCR o ...
Recording on Camcorder fr om VCR or TV Monitor (continued) 55 How to Record on the Camcorder fr om a TV (or VCR) 1. A. Camcorder connected directly to TV monitor: Turn on the TV, and tune it to the channel you want to record. B. Camcorder connected to a VCR that is already connected to a TV: Turn on VCR and select channel you want to record, or pla ...
Camcorder Recording T ips 56 Practice recording under a variety of lighting conditions. This will help you respond quickly whenever you see a scene you want to record. When using manual focus, it is easier to make professional looking videos if you check the focus before you start recording. Use your camcorder’s zoom to help you focus manually. B ...
57 The lens hood can be removed so you can attach optional accessories. To remove the lens hood, put your hand flat against the lens hood and turn it counterclockwise. Do not grasp the end of the lens hood. Attaching the Shoulder Strap Removing the Lens Hood Caution: When carrying the camcorder with the shoulder strap, you may find it convenient to ...
58 Car e and Maintenance Pr oper Care and Storage Keep dust and grit from entering the camcorder’s cassette door. Dust and grit are abrasive and will cause excessive wear both to the camcorder’s recording/playback heads and cassettes. We recommend RCA video cassettes be used with this camcorder. These cassettes have been manufactured to our cri ...
59 V iewfinder Playback Viewfinder playback is the simplest way to watch tapes using the camcorder. This method is generally used only to review scenes immediately after recording because the display is in black and white. To play back a tape through the viewfinder, follow these steps: 1. Slide the POWER switch to the VCR position. 2. Slide the EJE ...
60 Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks, you will need the audio/video output cable that came packed with your camcorder. If your TV is already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording or playing on ...
61 Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks (continued) 1. A. Camcorder connected directly to TV monitor: Turn on the TV and tune it to the video input channel. B. Camcorder connected to VCR that is already connected to TV: Turn on VCR and place it in the “line” or “camera mode”. (If your VCR does not have a “line” or “camera ...
62 Playback on a TV without AUDIO/VIDEO IN Jacks To connect your camcorder to a TV without AUDIO/VIDEO IN jacks, you will need the RF output adapter and coaxial RF cable that came packed with your camcorder. If your TV has AUDIO and VIDEO IN jacks (or is connected to a VCR), refer to pages 60-61. Installation 1 Disconnect the VHF antenna from your ...
63 Playback on a TV without AUDIO/VIDEO IN Jacks (continued) Playback Operation 1. Set the CH3/CH4 switch on the adapter to channel 3 or 4. 2. Turn on the TV, and tune it to the same channel you selected with the RF output adapter’s CH3/CH4 switch. 3. Slide the camcorder’s POWER switch to the VCR position, and insert the cassette you want to pl ...
No power Won’t record or playback Won’t playback Won’t record No picture in viewfinder T r ouble Checks 64 T roubles sometimes are caused by simple “faults” that you can easily correct without the help of a service technician by first checking a few basic remedies. Before you call or take your camcorder to an Authorized RCA Compact Camcor ...
Tape stops during rewind or fast forward Camcorder remains in “stop action” (play-pause) mode Poor auto-focus operation Picture is too dark or subject too dark. Viewfinder displays are out of focus Shutter-speed display not in viewfinder Date and/time or date were recorded on tape T rouble Checks (continued) 65 • Time-counter memory may be on ...
T r ouble Checks (continued) 66 Date and/or time are incorrect Remote control will not operate camcorder (Pro870 Only) Images are recorded thinner than they are • Clock battery may need replacing. See page 32 . • Date and/or time may need to be set. See pages 32-33. • Aim remote control at remote control sensor on camcorder. • Remote contro ...
Specifications 67 General Power requirement: 6VDC Power consumption: 6 watts (normal) Weight: 1.8 lbs. (810g) Dimensions: 4-7/16"(W) x 4-1/2"(H) x 6-7/8"(D) (112 x 114 x 174mm) Video Recorder Section Format: 8mm Record/Playback System: Two video record/playback heads One flying erase head Headwheel Cylinder Diameter: 40 mm Video Sign ...
68 Compact Camcorder Limited W arranty What your warranty covers: • Any defect in material or workmanship. • 90 days for labor charges. • One year for parts. The warranty period for rental units begins with the first rental. What we will do: • Pay any Authorized RCA Compact Camcorder Servicenter the labor charges to repair your camcorder. ? ...
69 Index 16X9 Mode ..........................................47 16X9 Mode Display .............................42 A/V (Audio/Video) DUB Button .................................8-19,52-53 Accessories, Included .........................2,8 Accessories, Optional .........................1-7 Accessory Order Form .......................5-7 Adapter/Charg ...
Erase Protection ...................................26 Eyepiece Focus Control .............11,12,34 F.FWD (Fast Forward) Button .....................14,18-19,28-33,59 Fade Button ..........................12,28-29,35 Fading In and Out ................................35 FASTFWD Display .........................40-41 First-Time Operation ............ ...
Index (continued) 71 Recording on the Camcorder from a VCR or TV .................................54-55 Recording Speed and Times ................26 Recording Steps, Detailed ..............28-29 Recording Steps, First-Time.............8-15 Recording Times and Speed ................26 Recording Tips, Camcorder .................56 Registration, Produ ...
For your nearest home entertainment Dealer or Authorized Servicenter call toll-free in the U.S.A. 1-800-336-1900 If you would like a copy of this manual in French, please follow the instructions below: Si un livret d’instructions en français n’est pas inclus avec votre appareil, vous pouvez en obtenir un (indiquer le numéro de modèle, votre ...
RCA Pro867のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- Pro867の取扱説明書
- RCAの製品カード
- パンフレット
- またはRCA Pro867の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、RCA Pro867の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、RCA Pro867の取り付け説明書、サービスマニュアル、簡易説明書、またはRCA Pro867のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、RCA Pro867の製品を使用するにあたって最も人気のある説明書を閲覧できます。
RCA Pro867デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがRCA Pro867を使用するのを助ける技術的文書のことです。説明書は通常、全てのRCA Pro867ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
RCAの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. RCA Pro867の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははRCA Pro867の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。RCA Pro867に関してこのドキュメントで見つけることができる全てのヒントの目次
3. RCA Pro867デバイスの基本機能を使うにあたってのヒント。 RCA Pro867のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。RCA Pro867に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるRCA Pro867のメーカー/サービスへの連絡先に関する情報。
RCA Pro867についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもRCA Pro867の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがRCA Pro867で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。