-
Philips 21PV330/07 - page 1
1. CONNECTING YOUR TV-VIDEO COMBI 4 .............. Connecting the cables 4 ............................. Connectin g a decode r o r othe r equipmen t 4 ............ 2. INSTALLING YOUR TV-VIDEO COMBI 5 ................ Initial installation 5 .................................. Allocating a decoder 5 .............................. Manual TV channel se ...
-
Philips 21PV330/07 - page 2
The remote control TELETEXT e TELETEXT : To switch TELETEXT on or off STANDBY m Switch off : To switch off set, interrupt menu function, interrupt a programmed recording (TIMER) SMART SMART PICTURE : To call up preset picture settings SMART # SMART SOUND : To call up preset sound settings 0-9 Number buttons :0-9 CLEAR Delete : To delete last entry ...
-
Philips 21PV330/07 - page 3
Front of the set 8 Power switch : To switch off the machine Beware: If you switch off with the power switch, TIMER-recordings are not possible! m Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER) P r/q Programme number : To select programme number up or down Sr/qx Volume : To regulate the volume, to switch on t ...
-
Philips 21PV330/07 - page 4
Congratulations! You now own one of the most sophisticated and simple-to-use TV-VIDEO Combinations on the market. With this TV-VIDEO Combi you can record and play VHS-standard cassettes. Please take the time to read this operating manual before using your TV-VIDEO Combi. Safety instructions and other notes A Danger: High voltage! Do not remove the ...
-
Philips 21PV330/07 - page 5
Special functions on your TV-VIDEO Combi If a TV channel which transmits TXT/PDC is stored under programme number ’ P01 ’, time and date will automatically be taken from the TXT/PDC information. Crystal Clear video has become the synonym for outstanding picture quality combining Philips’ very latest technologies: Natural Colour, Studio Tracki ...
-
Philips 21PV330/07 - page 6
Important for the United Kingdom This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows: a Remove fuse cover and fuse. b Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI approved type. c Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it shou ...
-
Philips 21PV330/07 - page 7
Initial installation a Open up the battery compartment of your remote control and place the batteries in it as shown in the picture. b Close the battery compartment. c If you have connected the aerial to the TV-VIDEO Combi, press the OK button. ’Automatic TV channel search’ starts. This picture will appear on the screen: Searching... CHANNELS F ...
-
Philips 21PV330/07 - page 8
Manual TV channel search In certain cases the ’Automatic TV channel search’ may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels. a Press the MENU button on the remote control. The main menu will appear. b Select the line ’ Installation ’ with the B P r or A P q bu ...
-
Philips 21PV330/07 - page 9
Special installation functions You can select one of the following installation functions in order to adapt your TV-VIDEO Combi to your own specific requirements. Automatic TV channel search Your TV-VIDEO Combi will search for all TV channels. If you want to start the automatic TV channel search again, then follow the instructions below. a Press th ...
-
Philips 21PV330/07 - page 10
Allocating a channel number a Press the MENU button. The main menu will appear. b Select the line ’ Installation ’ with the B P r or A P q button and confirm with the SqC button. c Select the line ’ Sort channels ’ with the B P r or A P q button and confirm with the SqC button. SORT CHANNELS 01 zzz 04 aaa 02 yyy 05 bbb 03 xxx 06 ccc ã Exit ...
-
Philips 21PV330/07 - page 11
Setting the language You can select the language for the on-screen display (OSD). a Press the MENU button on the remote control. The main menu will appear. MAIN MENU Picture Sound Setup Tape Installation ã Exit: « press MENU b Select the line ’ Installation ’ with the B P r or A P q button and confirm with the SqC button. INSTALLATION Add new ...
-
Philips 21PV330/07 - page 12
SUMMARY OF USER GUIDE The OSD menu offers the following functions. More details on each can be found in the appropriate chapter. MAIN MENU Picture Sound Setup Tape Installation ã Exit: « press MENU User guide (OSD) The OSD (On-screen display) shows the various functions in the form of a menu on the television screen. You can then choose the setti ...
-
Philips 21PV330/07 - page 13
Important notes for operation E We suggest that, from now on, you switch off your TV-VIDEO Combi with the STANDBY m button on the front of the set or on the remote control. When the set is in the standby mode, a small red lamp at the front of the set will be alight. E You can switch on with the P p or z button, the 0-9 buttons or by inserting a cas ...
-
Philips 21PV330/07 - page 14
Selecting a TV programme Select the required TV channel (=programme number) with the P p button or with the digit buttons 0-9 on the remote control. D If you don’t know the programme number of the required TV channel: a Press the P p button for more than 2 seconds. The TV channel list appears on the screen. b Select the required TV channel with t ...
-
Philips 21PV330/07 - page 15
How to read TELETEXT E Press the TELETEXT e button to switch the TXT decoder on and off. The TV-VIDEO Combi is now receiving the TXT of the TV channel currently selected. E To store the current page as preferred page, press the OK button. The next time you call up TELETEXT, you will automatically turn to this page. E If you want to select an other ...
-
Philips 21PV330/07 - page 16
Playing a cassette a Put a cassette into the cassette slot. b Press the PLAY G button. E If you press the STOP h button once, the TV-VIDEO Combi will switch to pause. To stop, press the STOP h button again. E To eject the cassette, press the ? button on the TV-VIDEO Combi or press the STOP h button on the remote control several seconds. D Before tr ...
-
Philips 21PV330/07 - page 17
Picture interference When the picture quality is poor when you play a cassette, please follow these instructions. Tracking during playback a During playback, press the MENU button. b Select the line ’ Tape ’ with the buttons B P r or A P q and confirm with the SqC button. c Select the line ’ Tracking ’ with the buttons B P r or A P q . d Ho ...
-
Philips 21PV330/07 - page 18
Use ’Manual Recording’ to make a spontaneous recording (for example, a programme currently being shown). E If you want to start and stop a recording manually, read the section: ’Recording without automatic switch-off’. E If you want to start a recording manually but have it stopped automatically, read the section: ’Recording with automati ...
-
Philips 21PV330/07 - page 19
Selecting the recording speed (SP or LP) You can reduce the recording speed by half. This makes it possible to record, for example, eight-hours instead of four-hours on an ’E240’ (four-hour) cassette. a Press the MENU button. The main menu appears. b Select the line ’ Tape ’ with the B P r or A P q button, and confirm with the SqC button. c ...
-
Philips 21PV330/07 - page 20
Use programmed recording to automatically start and stop a recording at a later date. To make a programmed recording, your TV-VIDEO Combi needs to know: * the date you want to make the recording; * the programme number for the TV channel you want to record; * the start and stop time of the recording; * whether you want to use VPS or PDC; * the reco ...
-
Philips 21PV330/07 - page 21
D If VIDEO Plus+ does not recognise the TV channel, ’ P?? ’ will appear on the TV screen. Instead of ’ P?? ’, you can select the programme number you want with the number buttons 0-9 . D If ’ Code error ’ appears on the TV screen, this means you entered an incorrect PlusCode number or the incorrect date. Correct your instructions or end ...
-
Philips 21PV330/07 - page 22
h If you have confirmed with the OK button, exit the menu with the TIMER s button. E The programming information has been stored in a TIMER block. i Make sure that the cassette you have put in can be recorded on. Automatic recording from a satellite receiver (SAT RECORDING) You can use this function if you own a satellite receiver that can control ...
-
Philips 21PV330/07 - page 23
How to check or change a TIMER a Press the TIMER s button on the remote control. b Select the line ’ TIMER PROGRAMMING ’ with the menu buttons B P r or A P q and confirm with the SqC button. c Select the TIMER you want to check or change with the B P r or A P q button and confirm with the OK button. d Select the entry field with the DSr or SqC ...
-
Philips 21PV330/07 - page 24
Parental control This function will prevent unauthorised use of your TV-VIDEO Combi. All button-functions will be locked. D You can make programmed recordings while the parental control is on. a Press the MENU button. The main menu will appear. b Select the line ’ Setup ’ with the B P r or A P q button and confirm with the SqC button. SETUP Par ...
-
Philips 21PV330/07 - page 25
Switching to 16:9 wide screen picture If you are using a cassette with 16:9 wide screen recordings, you can switch this function ’ON’. The TV-VIDEO Combi will now automatically switch to wide screen. a Press the MENU button. The main menu appears. b Select the line ’ Setup ’ with the B P r or A P q button and confirm with the SqC button. SE ...
-
Philips 21PV330/07 - page 26
Continuous playback You can automatically play a cassette again and again. When the end of the tape or the recording has been reached, it will rewind and start again. a Press the MENU button. The main menu appears. b Select the line ’ Tape ’ with the menu buttons B P r or A P q . Confirm with the menu buton SqC . TAPE Tape speed SP Tape counter ...
-
Philips 21PV330/07 - page 27
If, contrary to expectation, you have any problems using this TV-VIDEO Combi, it may be caused by one of the reasons mentioned below. You can also call the customer service centre in your country. You will find the phone number in the enclosed guarantee leaflet. Have the model number (MODEL NO) and the production number (PROD.NO) of your video reco ...
-
Philips 21PV330/07 - page 28
Technical terms used Current tape position : The part of the tape currently being played. External source : A device connected via a socket (for example, scart socket) which is transmitting audio/video signals to the TV-VIDEO Combi. Index marking : A marking which is automatically made on the tape at the beginning of every recording. This marking ( ...
Philips 21PV330/07についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもPhilips 21PV330/07の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがPhilips 21PV330/07で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。