日本語 dropdown-ico

Toshiba B-EP4DLの取扱説明書

27ページ 2.26 mb
ダウンロード

ページに移動 of 27

Summary
  • Toshiba B-EP4DL - page 1

    PRINTED IN JAPAN TOSHIBA Potable Printer B-EP4DL SERIES Document No. EO18-33023 Original Sep., 2008 (Revised ) Maintenance Manual ...

  • Toshiba B-EP4DL - page 2

    WARNING! Follow all manual instructions. Failure to do so could create safety hazards such as fire or electrocution. NOTE: Failure to follow manual instructions or any unauthorized modification, substitution orchange to this product will void the limited product warranty. ...

  • Toshiba B-EP4DL - page 3

    EO18-33023 (Revision Date: Dec. 16, 2008) CAUTION! 1. This manual may not be copied in whole or in part without prior written perm ission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification. Copyright © 2008 by TOSHIBA TEC CORPORATION A ll Rights Reserved 570 Ohito, Izunokuni-shi, Shi zuoka-ken, JAPAN TABLE OF CONTEN ...

  • Toshiba B-EP4DL - page 4

    1. UNPACKI NG EO18-33023 1.1 Procedure 1- 1 1. UNPACKING 1.1 Procedure 1) Open the carton. 2) Unpack the accessories from the carton. 3) Unpack the printer. NOTE: Keep the carton and pad for future transportation of the printer. 1.2 Checks 1) Check for damage or scratches on the machine. 2) Confirm that none of the accessories are missing. ...

  • Toshiba B-EP4DL - page 5

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.1 Replacing the CPU PC Board 2-1 2. MAJOR UNIT REPLACEMENT WARNING! 1. Disconnect the power cord before installing the main parts. 2. Be careful not to injure your fingers when replacing the main parts. CAUTION! 1. Since a lot of small moulded parts are used in this printer, care must be taken not to damage or ...

  • Toshiba B-EP4DL - page 6

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.1 Replacing the CPU PC Board 2-2 4) Press the Top Cover Open Button to open the Top Cover. 5) Remove the Left Side Cover in the direction of the arrow. 6) Remove the Right Side Cover and the Front Cover in the direction of the arrow, respectively. NOTE: The Gears shown in the picture below are not secured and ...

  • Toshiba B-EP4DL - page 7

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.1 Replacing the CPU PC Board 2-3 7) Remove the Front Cover. 6) Disconnect all Connectors and FPC Cable from the CPU PC Board. NOTE: Before disconnecting the FPC Cable, release the Connector Lock. 7) Disconnect the Earth Terminal from the Drive PC Board. Front Cover CPU PC Board FPC Cable Connector Lock CPU PC ...

  • Toshiba B-EP4DL - page 8

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.1 Replacing the CPU PC Board 2-4 8) Open the Hooks, then remove the CP U PC Board from the Front Cover. 9) Remove the screw, then remove the Earth Terminal. 10) Replace the CPU PC Board with a new one, then reassemble in the reverse order of removal. Hook Hook CPU PC Board T-2x5 Screw Earth Terminal ...

  • Toshiba B-EP4DL - page 9

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.1 Replacing the CPU PC Board 2-5 11) Close the front cover. 12) Mount the left side cover to the printer while fitting the tabs on the left side cover into the slots of the printer enclosure. Fit the tabs A to D into the slots A’ to D’. Front Cover Tab Tab B Tab C Tab D A ’ B’ C’ D’ NOTES: 1. Make ...

  • Toshiba B-EP4DL - page 10

    2. MAJOR UNIT REPLACEMENT EO18-33023 (Revision Date: Dec. 16, 2008) 2.1 Replacing the CPU PC Board 2-6 13) Mount the rig ht side cover to the printer while fitting the tabs on the right side co ver into the slots of the printer enclosure. Fit the tabs A to C into the slots A’ to C’. NOTE: It is easy to mount the left side cover if you fit the t ...

  • Toshiba B-EP4DL - page 11

    2. MAJOR UNIT REPLACEMENT EO18-33023 (Revision Date: Dec. 16, 2008) 2.1 Replacing the CPU PC Board 2-7 NOTES: 1. After replacing the CPU PC Board, refer to t he Setting Operation Manual or System Mode Manual an d perform the following operations. 1. Perform a RAM clear. 2. Perform the sensor adjustment. 2. After replacing the CPU PC Board, perform ...

  • Toshiba B-EP4DL - page 12

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.2 Replacing the LCD Unit 2-8 2.2 Replacing the LCD Unit 1) Remove the Right Cover, Left Cover, Fr ont Cover and CPU PC Board. (Refer to Section 2. 1 Replacing the CPU PC Board .) 2) Remove the three screws, then remove the LCD Unit. 3) Replace the LCD Unit with a new one, then r eassemble in the reverse order ...

  • Toshiba B-EP4DL - page 13

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.3 Replacing the Peel-off Roller 2-9 2.3 Replacing the Peel-off Roller 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Remove the two Roller Clips with a straight slot screwdriver, then remove the Peel-off Roller Ass’y. 3) Remove the two Peel-off R ...

  • Toshiba B-EP4DL - page 14

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.4 Replacing the Peel-off Sensor 2-10 2.4 Replacing the Peel-off Sensor 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Disconnect the Connector from the CPU PC Board. 3) Pull out the Cover Shaft, then remove the Peel-off Sensor Unit. 4) Release the ...

  • Toshiba B-EP4DL - page 15

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.4 Replacing the Peel-off Sensor 2-11 6) Replace the Peel-off Sensor with a new one, t hen reassemble in the reverse order of removal. NOTES: 1.Be careful of the orientation of the Peel-off Sp rings as shown in the picture below when reassemblin g the Peel-off Sensor Unit. 2. After replacing the Peel-off Sen so ...

  • Toshiba B-EP4DL - page 16

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.5 Replacing the Drive PC Board 2-12 2.5 Replacing the Drive PC Board 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Disconnect all Connectors and FPC C able from the Drive PC Board. 3) Remove the Drive PC Board from the Guide. 5) Replace the Drive ...

  • Toshiba B-EP4DL - page 17

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.6 Replacing the Battery Terminal 2-13 2.6 Replacing the Battery Terminal 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Remove the Drive PC Board. (Refer to Section 2.5 Replacing the Drive PC Board .) 3) Hold down the Hook and remove the Battery Te ...

  • Toshiba B-EP4DL - page 18

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.7 Replacing the Stepping Motor 2-14 2.7 Replacing the Stepping Motor 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Remove the two screws. 3) Disconnect the Connector from the Drive PC Board. 4) Remove the Stepping Motor. Replace the Stepping Motor ...

  • Toshiba B-EP4DL - page 19

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-15 2.8 Replacing the Print Head 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Release the Hooks, then remove the Media Sensor Holder Ass’y upward. 3) Remove the right and left E-Rings. ...

  • Toshiba B-EP4DL - page 20

    2. MAJOR UNIT REPLACEMENT EO18-33023 (Revision Date: Dec. 16, 2008) 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-16 5) Disconnect the Head FPC from the Print Head Connector. NOTE: When reassembling the Head FPC, the contact portion should be faced upward. 6) Remove the Print Head Ass’y. 7) Disconnect the Head FPC Cable from the ...

  • Toshiba B-EP4DL - page 21

    2. MAJOR UNIT REPLACEMENT EO18-33023 (Revision Date: Dec. 16, 2008) 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-17 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Release the Hooks by pulling the Paper Gu ide ...

  • Toshiba B-EP4DL - page 22

    2. MAJOR UNIT REPLACEMENT EO18-33023 (Revision Date: Dec. 16, 2008) 2.9 Replacing the Cover Open Switch and Media Sensor (Lower) 2-18 5) Remove the Cover Open Switch (L) and Cover Open Switch (R) from the Base Cover. 6) Replace the Media Senso r (Lower) and Cover Open Switches (L) and (R) with a new one, then re assemble in the reverse order of rem ...

  • Toshiba B-EP4DL - page 23

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.10 Replacing the Media Sensor (Upper) 2-19 2.10 Replacing the Media Sensor (Upper) 1) Remove the Right Cover, Left Cover and Front Cover. (Refer to Section 2.1 Replacing the CPU PC Board .) 2) Remove the two screws which secure the Outlet Paper Guide Ass’y. 3) Release the Hooks, then remove the Outlet Paper ...

  • Toshiba B-EP4DL - page 24

    2. MAJOR UNIT REPLACEMENT EO18-33023 2.10 Replacing the Media Sensor (Upper) 2-20 5) Replace the Media Sensor (Upper) with a new one, then reassemble in the reverse order of removal. NOTE: A fter replacing the Media Sensor, refer to the Setting Operation Manual o r System Mode Manual an d p erform the following operations. 1. Perform a RAM clear. 2 ...

  • Toshiba B-EP4DL - page 25

    2. MAJOR UNIT REPLACEMENT EO18-33023 (Revision Date: Dec. 16, 2008) 2.10 Replacing the Platen Ass’y 2-21 2.11 Replacing the Platen Ass’y 1) Remove the Upper Sensor Cover. (Refer to Section 2.9 Replacing the Media Sensor (Upper) .) 2) Release the Hooks, then remove the Platen Ass’y. 3) Replace the Platen Ass’y with a new one, then reassemble ...

  • Toshiba B-EP4DL - page 26

    3. TROUBLESHOOTI NG EO18-33023 3. TROUBLESHOOTING 3- 1 3. TROUBLESHOOTING Problems Cause Solution The printer is not turned on. 1. The battery is not loaded correctly. 2. The battery terminal is disconnected from the soldering part. 3. CPU PC board ass'y failure or Drive PC board ass'y failure 1. Re-load the battery correctly. 2. Replace ...

  • Toshiba B-EP4DL - page 27

    3. TROUBLESHOOTI NG EO18-33023 3. TROUBLESHOOTING 3- 2 Problems Cause Solution The printer does not print labels one by one in the strip mode or specified number of labels in the batch mode. 1. The sensors are not adjusted properly. 2. The sensors are not installed properly. 3. The sensors are dirty. 4. The sensors are disconnected from the CPU PC ...

メーカー Toshiba カテゴリー Printer

Toshiba B-EP4DLのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- B-EP4DLの取扱説明書
- Toshibaの製品カード
- パンフレット
- またはToshiba B-EP4DLの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Toshiba B-EP4DLの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Toshiba B-EP4DLの取り付け説明書、サービスマニュアル、簡易説明書、またはToshiba B-EP4DLのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Toshiba B-EP4DLの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Toshiba B-EP4DLデバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがToshiba B-EP4DLを使用するのを助ける技術的文書のことです。説明書は通常、全てのToshiba B-EP4DLユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Toshibaの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Toshiba B-EP4DLの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははToshiba B-EP4DLの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Toshiba B-EP4DLに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Toshiba B-EP4DLデバイスの基本機能を使うにあたってのヒント。 Toshiba B-EP4DLのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Toshiba B-EP4DLに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるToshiba B-EP4DLのメーカー/サービスへの連絡先に関する情報。

Toshiba B-EP4DLについてご質問がありますか？

次のフォームを使用してください

見つけた説明書を読んでもToshiba B-EP4DLの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがToshiba B-EP4DLで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

Captcha
新しい画像

コメント (0)