Jasco RM24927の取扱説明書

38ページ 0.31 mb
ダウンロード

ページに移動 of 38

Summary
  • Jasco RM24927 - page 1

    Univ ersal Remot e Contr ol INS TRUCTION MANU AL RM24927 & RM94927 24927 Revised Size 7" x 2 3/4" 8/19/03 9:10 AM Page 1 ...

  • Jasco RM24927 - page 2

    Thank you for purchasing the GE Universal Remote Control. This pr oduct is designed to provide years of service operating a wide variety of video and audio equipment. Please retain this guide for futur e refer ence. T able of Contents Install the Batteries 1 Button Description 2-4 Programming for TV 5 Programming for VCR 6 Programming For DVD 7 Pro ...

  • Jasco RM24927 - page 3

    Button Description INDICA TOR LIGHT The Indicator Light flashes to show that the remote is working. ON•OFF The ON•OFF button operates the same as your original remote. NOTE: Some GE, RCA and ProScan models requir e you to pr ess the device button to turn the device on and the ON•OFF button to turn the device off. TV , VCR, DVD, SA T , AUDIO, ...

  • Jasco RM24927 - page 4

    CLEAR Removes the on screen display to r eturn to normal viewing. 0-9 The number buttons operates the same as on your original remote, and ar e used for enter- ing device codes. ENTER The ENTER button is used to complete chan- nel selection for some brands of TV . It is also used to complete the code entry process. TV/VCR The TV/VCR button operates ...

  • Jasco RM24927 - page 5

    4 AM•FM The AM•FM button allows you to select the AM•FM band on your audio receiver . FUNCTION T oggles the differ ent audio input devices. The number buttons also select the function labeled below the buttons when in AUDIO mode. DELA Y -, ON, DELA Y+ Increases or decr eases the delay between the surround and main speakers when the r eceiv- e ...

  • Jasco RM24927 - page 6

    5 Programming For TV Most GE, RCA and ProScan TVs will not requir e programming. Check to see if your TV responds to the r emote before you begin programming. 1. Manually turn on the TV . Find the three digit code for your TV in the code list below . 2. Press and hold the CODE SEARCH but- ton until the INDICA TOR LIGHT lights, then release the CODE ...

  • Jasco RM24927 - page 7

    6 Programming For VCR Most GE, RCA and ProScan VCRs will not requir e programming. Check to see if your VCR responds to the r emote before you begin programming. 1. Manually turn on the VCR. Find the three digit code for your VCR in the code list below . 2. Press and hold the CODE SEARCH button until the INDICA TOR LIGHT lights, then release the CO ...

  • Jasco RM24927 - page 8

    7 Programming For DVD Most GE, RCA and ProScan DVD systems will not requir e programming. Check to see if your DVD system responds to the r emote before you begin pr ogramming. 1. Manually turn on the DVD system. Find the three digit code for your DVD system in the code list below . 2. Press and hold the CODE SEARCH button until the INDICA TOR LIGH ...

  • Jasco RM24927 - page 9

    8 Programming For DBS Satellite System Most GE, RCA and ProScan Satellite sys- tems will not requir e programming. Check to see if your DBS Satellite system responds to the remote befor e you begin program- ming. 1. Manually turn on the DBS system. Find the three digit code for your DBS system in the code list below . 2. Press and hold the CODE SEA ...

  • Jasco RM24927 - page 10

    9 Programming For Cable 1. Manually turn on the Cable Box. Find the three digit code for your Cable Box in the code list below . 2. Press and hold the CODE SEARCH but- ton until the INDICA- TOR LIGHT lights, then release the CODE SEARCH button. 3. Press and r elease the CBL button (The INDICA TOR LIGHT will blink then remain lit. 4. Enter the code ...

  • Jasco RM24927 - page 11

    10 Programming For Audio This remote contr ol will operate many fea- tures found in audio/video r eceivers. The remote contr ol is already programmed to operate most GE, RCA and ProScan brand A/V receivers. Other brands of r eceivers need to be set-up under the AUDIO button prior to using the device. 1. Manually turn on the device you wish to contr ...

  • Jasco RM24927 - page 12

    11 Programming For Second Device If you have not programmed the AUDIO•AUX button for audio components, you can assign a second TV , DVD, CD play- er , VCR, Satellite System, or Cable Box to it. 1. Manually turn on the device you wish to control. Find the thr ee digit code for the device you wish to program in the code list. 2. Press and hold the ...

  • Jasco RM24927 - page 13

    12 Operating Audio Functions NOTE: Not all functions work for all brands. TURNING ON THE RECEIVER OR MINI- SYSTEM Point the remote contr ol at the reciever and press the AUDIO button. The receiver should turn on. In some cases, it may requir e pressing the AUDIO button and then the ON•OFF button to turn the system on. SELECTING A DEVICE INPUT Dev ...

  • Jasco RM24927 - page 14

    13 OPERA TING THE AM/FM TUNER 1. Press the AUDIO button. 2. Press the TUNER (3) button. 3. Press the AM/FM button to toggle between AM and FM. 4. Use the Preset (CHAN+/CHAN-) buttons to move up and down channel presets. OPERA TING A HOME THEA TER SUR- ROUND SOUND SYSTEM W ith GE receivers, a second pr ess of the TV button should turn the receiver o ...

  • Jasco RM24927 - page 15

    14 Sleep Function The Sleep Function will turn off your TV automatically after the user programs the time interval from one (1) to ninety-nine (99) minutes. 1. Press and hold the SLEEP button. The INDICA TOR LIGHT will stay lit. Release the SLEEP button. 2. Enter time in min- utes using the numeri- cal keypad. INDICA- TOR LIGHT will go of f. (Min.: ...

  • Jasco RM24927 - page 16

    Programming W ith Code Search If your TV , VCR, DBS Satellite System, Cable Box or Audio System does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching your code by following the steps below: 1. Manually turn on the device you wish to program. 2. Press and hold the CODE SEARCH until the INDI ...

  • Jasco RM24927 - page 17

    Identifying Codes From Y our Remote If you need to find the three-digit code for your TV , VCR, DBS System, Cable Box or Audio System after your device is set-up, use this procedur e. 1. Press and hold CODE SEARCH until the INDICA TOR LIGHT lights, then release CODE SEARCH. 2. Press and r elease the device button for the code you are retrieving. Th ...

  • Jasco RM24927 - page 18

    SOLUTION A) Replace the batter- ies with 2 new AAA alkaline batteries. B) Check if batteries are pr operly installed. A) T ry all the codes listed for your brand. B) T ry the Code Search method. Start Code Search over again to locate properlythe pr oper code for full compati- bility T ry the VCR code for your brand. Some combo units, howev- er , ma ...

  • Jasco RM24927 - page 19

    90 Day Limited W arranty Jasco Products Company warrants this product to be fr ee from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or r eplace- ment of this product only and does not extend to consequential or incidental dam- age to other products that may be ...

  • Jasco RM24927 - page 20

    Gracias por comprar el Control Remoto Universal GE. Este producto está diseñado para proveerle años de servicio operando una amplia variedad de equipo de video y audio. Por favor guarde esta guía para obtener refer encias en el futuro. Indice Instale las Baterías . . . . . . . . . . . . . . . . . . . . . . . .19 Descripción de los Botones . . ...

  • Jasco RM24927 - page 21

    Descripción de Botones LUZ INDICADORA La luz indicadora parpadea para mostrar que el control r emoto está trabajando. ON-OFF (ENCENDIDO-AP AGADO) El botón ON-OFF opera de la misma man- era que su control r emoto original. NOT A: Algunos modelos GE, RCA y ProScan requier en que usted presione el botón del aparato para encender el aparato y el bo ...

  • Jasco RM24927 - page 22

    MENU-PROG (MENU/PROGRAMAR) Muestra en la pantalla el Menu Principal. Si usted ya se encuentra en el sistema del menu, presione SELECT para seleccionar la opción resaltada. Utilice los botones con fle- chas para moverse dentro del Menu. CLEAR (DESPEJAR) Remueve lo que está mostrado en la pantalla para volver a la pantalla normal. 0-9 Los botones e ...

  • Jasco RM24927 - page 23

    Descripción de Botones par la Operación de Audio Presione el botón AUDIO para habilitar las funciones de la Modalidad AUDIO indi- cadas por las descripciones escritas en rosa LEVEL+ / LEVEL- (NIVEL+ / NIVEL-) Establece el nivel de las bocinas durante la modalidad de prueba de tono. DSP ON-OFF Activa la Modalidad de Procesamiento de Sonido Digita ...

  • Jasco RM24927 - page 24

    FRONT , CENTER, REAR, TEST (FRONT AL, CENTRAL, TRASERA, PRUEBA) Ajusta respectivamente los niveles de las bocinas frontal, central y trasera. Primeramente se debe activar el tono de prueba presionando el botón TEST . PRESET (EST ABLECIDOS ANTERIOR- MENTE) Se utiliza para operar los canales estableci- dos anterior mente mientras se encuentra en la ...

  • Jasco RM24927 - page 25

    Programación para el televisor La mayor parte de los televisores GE, RCA y ProScan no r equerir n ser programados. V erifique para ver si su televisor responde al control r emoto antes de comenzar la progra- mación. 1. Manualmente encienda el televisor . Encuentre el código de tr es dígitos para su televisor en la lista de códigos que se encue ...

  • Jasco RM24927 - page 26

    Programación para VCR1 y VCR2 La mayor parte de las videograbadoras GE, RCA y ProScan no requerirán ser pr ogra- madas. V erifique para ver si su videograbadora responde al contr ol remoto antes de comenzar la pr ogramación. 1. Manualmente encienda la videograbadora. Encuentre el código de tr es dígitos para su videograbadora en la lista de c? ...

  • Jasco RM24927 - page 27

    26 Programación para el sistema DVD La mayor parte de los sistemas DVD GE, RCA y ProScan no requerirán ser pr ograma- dos. V erifique para ver si su sistema DVD responde al contr ol remoto antes de comen- zar la programación. 1. Manualmente encienda el sistema DVD. Encuentre el código de tr es dígitos para su sistema DVD en la lista de código ...

  • Jasco RM24927 - page 28

    27 Programación para el Sistema de Satélite DBS La mayor parte de los sistemas de Satélite GE, RCA y ProScan no requerirán ser pr o- gramados. V erifique para ver si su sistema de Satélite DBS responde al contr ol remoto antes de comenzar la programación. 1. Manualmente encienda el sistema DBS. Encuentre el código de tr es dígitos para su s ...

  • Jasco RM24927 - page 29

    28 Programación para Cable 1. Manualmente encienda la Caja del Cable. Encuentre el código de tr es dígitos para su Caja del Cable en la lista de códigos que se encuentra a continuación. 2. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDI- CADORA se encienda, entonces suelte el botón CODE SEARCH. 3. Presione y suelte el botón C ...

  • Jasco RM24927 - page 30

    29 Programación para Audio Este control r emoto haciá muchas de las fun- ciones que se encuentran en los receptor es de video/audio y los sistemas de audio de mini- componentes. El control r emoto está progra- mado para operar la mayor parte de recep- tores de video/audio de las mar cas RCA y ProScan. Otr os marcas de r eceptores y sis- temas de ...

  • Jasco RM24927 - page 31

    30 ProgramaciÛn para el Botón AUX Puede asignar una TV , VCR o sistema de sátelite segunda o caje de cable a la botón "AUX". 1. Manualmente encienda el aparato que desea con- trolar . Encuentre el código de tres dígitos para el aparato que desea progra- mar en la lista de códigos. 2. Mantenga presionado el botón CODE SEARCH hasta ...

  • Jasco RM24927 - page 32

    31 Como usar la Función de Audio NOT A : No todas las funciones sirven para todas las marcas. COMO ENCENDER EL RECEPTOR O SIS- TEMA DE AUDIO DE MINICOMPO- NENTES Apunte el control r emoto al receptor y pr esione el botón AUDIO. El receptor debe encenderse. En algunos casos, puede requerir que se pr e- sione el botón AUDIO y después el botón ON ...

  • Jasco RM24927 - page 33

    32 COMO USAR UN SITEMA DE SONIDO ENVOL VENTE Con los receptor es GE, si presiona el botón TV por segunda vez, se encenderáel receptor . 1. Encienda el televisor . 2. Presione el botón AUDIO. 3. Seleccione la señal de entrada de audio ya sea usando los botones numerados etiquetados o el botón FUNCTION. 4. Presione los botones VOL+ o VOL- para c ...

  • Jasco RM24927 - page 34

    33 La función de apagado automático apagará su televisor automáticamente después de que el usuario programe un intervalo de tiempo entre uno (1) y noventa y nueve (99) minutos. 1. Mantenga presiona- do el botón SLEEP . La LUZ INDICADORA permanecerá encendi- da. Suelte el botón SLEEP . 2. Intr oduzca el tiempo en minutos utilizando el teclad ...

  • Jasco RM24927 - page 35

    34 Programación con B˙squeda de Códigos 1. Manualmente encienda el aparato que desee programar . 2. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADORA se encienda, entonces suelte el botón CODE SEARCH. 3. Presione y suelte el botón del aparato para el aparato que usted está programando. La LUZ INDICADORA parpa-deará una ve ...

  • Jasco RM24927 - page 36

    35 Como identificar los códigos para su Control Remoto Universal Si usted necesita encontrar el código de tres dígitos para su televisión, videograbadora, sistema DBS, Caja del Cable o sistema de audio después de que se ha programado su aparato, utilice este procedimiento: 1. Mantenga presionado el botón CODE SEARCH hasta que la LUZ INDICADOR ...

  • Jasco RM24927 - page 37

    36 PROBLEMA La luz roja no parpadea cuando presiona cualquier tecla. El control r emoto no opera sus aparatos de video. No desempeña los comandos cor- rectamente. T iene problemas programando una unidad combina- da de televisor y videograbadora. La videograbado- ra no responde. T iene problemas para cambiar de canales. No obtiene respuesta despué ...

  • Jasco RM24927 - page 38

    37 PROBLEMA La luz Indicadora Parpadea El botón SELECT no responde. SOLUCION Código no válido para el aparato. V erifique la lista de códigos y vuel- va a programar el Control Remoto. T rate el botón DISPLA Y para hacer la selección mientras se encuentre en la Guía del Programa. NOT A: Puede ser necesario volver a pro- gramar el control r em ...

メーカー Jasco カテゴリー Universal Remote

Jasco RM24927のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- RM24927の取扱説明書
- Jascoの製品カード
- パンフレット
- またはJasco RM24927の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Jasco RM24927の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Jasco RM24927の取り付け説明書、サービスマニュアル、簡易説明書、またはJasco RM24927のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Jasco RM24927の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Jasco RM24927デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがJasco RM24927を使用するのを助ける技術的文書のことです。説明書は通常、全てのJasco RM24927ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Jascoの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Jasco RM24927の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははJasco RM24927の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Jasco RM24927に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Jasco RM24927デバイスの基本機能を使うにあたってのヒント。 Jasco RM24927のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Jasco RM24927に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるJasco RM24927のメーカー/サービスへの連絡先に関する情報。

Jasco RM24927についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもJasco RM24927の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがJasco RM24927で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)