ページに移動 of 54
Software Versions 4.52s3 (G PS/GEO) and 6.48s16 (G PS/GLONASS) OM-AD-0020 Rev 1 NovAtel Inc. Test Bed Receiver Addendum to the MiLLennium Command Description s Manual ...
ii Test B ed Re ce iver Subsyst em A ddendum – Rev 1 Test Bed Receiver Subsystem Addendum Publication Number: OM-AD-0020 Revision Level: 1 00/4/11 This manual reflects Test Bed fir mware revision levels 4.52s3 ( GPS/GEO) and 6.48s16 (GPS/GLO NASS). Proprietary Notic e Infor mat ion in this doc ument i s subject to change w ithout noti ce and doe ...
Table of Contents Test B ed Re ce iver Subsyst em A ddendum – Rev 1 iii TABLE OF CONTENTS Foreword ....................................................................................................................... .... vii Scope .................................................................................................................. ...
Table of Contents iv Test B ed Rece i ver Sub system A ddendum – Rev 1 Datum .......................................................................................................................... .................................. 26 MiLLenniu m-GLONASS GPSCard Sys tem .......................................................................... ...
Table of Contents Test B ed Re ce iver Subsyst em A ddendum – Rev 1 v FIGURES Figure 1 The NovAtel Test B ed Receive r .................................................................................................. .................... 8 Figure 2 Test Bed Receiv er Function al Block Diagram...................................................... ...
...
Foreword Test B ed Re ce iver Subsyst em A ddendum – Rev 1 vi i FOREWORD SCOPE The Test Be d Receiver Subsystem Addendum is written for users of th e Test Bed Receiver Subs ystem and co ntains information specific to th e TESTBEDW and TESTBEDGLO software mo dels. This manual d escribes the No vAtel Test Bed R eceiver Subsy stem in sufficient d et ...
1 - Introduction 8 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 1 INTRODUCTION The Test Bed Receiver is based on a Wide A rea Aug men tation Sy stem receiver (NovA tel WAAS ). See Appendix A, Page 22 for an overv iew of the WA AS sy stem . THE NOVATEL TEST BED RECEIVER Figure 1 The NovAtel Test Bed Receiver The Test Bed Receiver consists of ...
1 - Introduction Test B ed Re ce iver Subsyst em A ddendum – Rev 1 9 OPERATIONAL OVERVIEW The NovAtel Tes t Bed Receiv er has two fun ctional bl ocks (see Figure 2 ): • Single Fre que ncy GPS GLO N ASS • Dual Fre que ncy GPS GE O Figure 2 Test Bed Receiver Functional Block Diagram RF/I F Di gi tizi ng BA CKPLA NE: Comm unic ation and Tim e Sy ...
1 - Introduction 10 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 Single Frequency GPS GLONASS The GPS G LONA SS is configur ed to tr ack 12 L1 C/ A-code signals ( Narr ow Corr elator trac king technol ogy), and 6 L1 GLON A SS C/A-c ode signals. The output i s used to com put e ionospher i c corr ecti ons. Dual Frequency GPS GEO Within the G ...
2 - Installation Test B ed Re ce iver Subsyst em A ddendum – Rev 1 11 2 INSTALLATION OF TEST BED RECEIVER This chapter provides suff icient information to allow you to set up and pr epar e the Test Bed Receiver f or initial oper ation. MINIMUM CONFI GURATIO N In order fo r the Test Bed Receiver to fu nction as a co mplete s ystem, a minimu m equi ...
2 - Installation 12 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 For the minimum configuration, setting up the T e st Bed Receiver involves the following steps: 1. Conn ect the user interface to the Test Bed Receiver ( “ GPS GLONASS ” and/or “ GPS GEO ” connect or s) 2. Inst a ll the G PS a nd GLON A SS antenna s a nd low-noise ampli ...
2 - Installation Test B ed Re ce iver Subsyst em A ddendum – Rev 1 13 command is disabled, or if the EXTERNAL clock command is disabled, then the two receivers will d rift away from each other in time. The n ormal mode of operation is to use either the in ternal OCXO or a highl y stable external os cillator. The 10 MHz OCXO is m ounted w ithin th ...
2 - Installation 14 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 CONNECTING DATA COMMUNICATI O NS EQUI PMENT There ar e two ser ial ports on the back panel of the T est Bed Receiver; both are configur ed for RS-232 protocol. These ports ma ke i t possible for ext er nal da ta c om muni ca tions e quipm ent - such a s a pe r sonal com pute r ...
2 - Installation Test B ed Re ce iver Subsyst em A ddendum – Rev 1 15 CONNECTING THE EXTERNAL POWER INPUT The Test Bed Receiver re quires one source of external regulated power. T he input can be in the +22 to +30 V DC range. The receiver draws up to 3 A at start-up, b ut the stead y-state requ irement is app roximately 1 .5 A. Five and tw elve v ...
2 - Installation 16 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 ACCESSING THE STROBE SIGNALS A str obe por t i s loc ated on the enclosur e back pa nel. T his is a di agnostic c onnector and is in t he for m of a DE9S connecto r (see Figure 11 ). The 1PPS and Measurement p ulse from bo th receiver sub systems are availab le on this connecto ...
3 - Operation Test B ed Re ce iver Subsyst em A ddendum – Rev 1 17 3 OPERATION Before operating the Test Bed Receiver for the first time, ensur e that you have followed the installation instructions in Chapter 2 . From here on, it will be assumed that testing and op eration of the Test Bed Receiver will be performed while using a personal compu t ...
3 - Operation 18 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 INITI AL COMMUNI CATI ONS WITH THE TEST BED RECEI VER Commun icating with the Test Bed Receiver is a st raightforward process an d is accomplis hed by issuing desired comma nds to the COM1 ports fr om an exter nal seria l communic ations device. For your initial testing and commun ...
4 - Update or Upgrade Test B ed Re ce iver Subsyst em A ddendum – Rev 1 19 4 UPDATE OR UPGRADE YOUR GPSCARD The M iLLennium stor es its program firmware in non- volatile memory, which allows you to perform f irmware upgr ades and update s without ha ving to ret urn the M iLL ennium to t he distr ibutor. New f irm ware can be t ransf err ed to the ...
4 - Update or Upgrade 20 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 where $auth is a specia l com m and whi c h allow s pr ogram mode l upgr ades auth-code is the upgr ade author ization code, expressed as hhhh,hhhh,hhhh,hhhh, hhhh,model # where the h characters are an ASCII hexad ecimal code, and the model# woul d be ASCII text Example: $ ...
4 - Update or Upgrade Test B ed Re ce iver Subsyst em A ddendum – Rev 1 21 USING THE LOADER UTILITY The Loader utility can opera te from any DOS direc tory or dr ive on your PC. The program is compri sed of three parts: Program Card (a uthoriz ation pr ocedur e), Setup (c omm unicati ons configur ation) and Term inal (terminal emulator). Th e mai ...
Appendices 22 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 A WAAS OVERVIEW The Wide Area Augmentation System (WAAS) is a safety-critical system wh ich is desig ned to en able the GPS to meet the U S Fede ral Aviation A dminist ration ( FAA) navigat ion perf orma nce r equire ments f or dome stic e n route, term inal, non-pre c ision appr oac ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 23 B GLONASS OVERVIEW MILLENNIUM-GLONASS GPSCARD The MiLLennium- GLONASS GPSCard can receive L1 signals f rom combined GPS/GLONASS satellites. This hybrid receiver offers comb ined GPS/GLONASS pos ition solutio ns. An RTK ver sion of the M iLLe nnium-G LONA SS GPSCard pe rform s signifi ...
Appendices 24 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 The NovAtel MiL Lennium -GL ONASS GPSCar ds ca n be applied i n mining a nd machi ne contr ol, roboti cs, fl ight inspection , marine navigation, ag riculture, military, direction fin ding and other custom OEM ap plications. Som e of t he i nf orm ati on u sed to create th e Intr odu ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 25 frequen cies used by the satellites and to gradually chan ge the L 1 frequencies to 1598.0625 - 1609.3125 MHz. Eventu ally the s yst em w ill only us e 12 primary frequen cy ch annels (plu s tw o additional channels for testing purposes). • Sys tem operation (24 satellites and on l ...
Appendices 26 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 TIME The GLONASS satellites broadcast their time within th eir satellite messages. NovAtel ’ s MiLLennium GLON ASS GPSCard is ab le to receive and reco rd both time references as well as rep ort the offset informatio n between GPS an d GLONASS time (see the GCLA/B log on Page 41 ). ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 27 FUNCTIONAL OVERVIEW MILLENNIUM-GLONASS GPSCARD SYSTEM The MiLL ennium- GLON ASS GPSCa rd c onsists of a ra dio fre quency ( RF) and a digi tal el ectr onics sect ion. Prior to operation, a GPS/GLONASS antenna, power supply, and data and signal interfaces m ust be connected. The overa ...
Appendices 28 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 GPS/GLONASS ANTENNA The pur pose of the GPS/GLONASS a ntenna is to convert the electr omagnetic wa ves transmitte d by the combined GPS/GLONASS satellites at the L1 fr equency (1575.42 M Hz for GPS and 1602 - 1615.5 MHz for GLONASS) into RF signals. The MiLLenn ium-GLONASS GPSCard wi ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 29 comm unicat ions ports suppor t user- sele ctable bit ra tes of 300 - 115,200 bps, w ith a de fault of 9600 bps. The digita l section doe s the fol l owing: • converts th e IF analog sig nals to a digital f ormat • tracks the C/A codes and carrier phases of the satellites in use ...
Appendices 30 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 C WAAS COMM ANDS AND LO GS These com mands and l ogs diffe r fr om the versi ons descri bed in the M iLL ennium Com mand D escr iptions Ma nual for the Test Bed Receiver at the time of this publication. COMMANDS CONFIG This comm and sw itches t he channe l confi guration of the GPSCa ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 31 IONOMODEL This comm and a llows the user to inf luence wha t ionosphe ric corr ections t he car d uses. T his com mand c urrent ly does not effe ct the ionospher ic model that is used when the c ard is operating in RTK m ode. Additional range value s are reserve d for futu re use. Th ...
Appendices 32 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 WAASCORRECTION This com mand allows you to have a n affe ct on how the car d handles WAAS corr ections. T he card will switc h automatically to Pseudorange Differential (RTCM or RTCA) or RT K if the appropriate cor rections are being received, regar dless of t he curr ent set t i ng. ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 33 LOGS RCCA RECEIVER CONFIGURATION This log out puts a list of all curre nt G PSCard comm and settings. Obser ving this log is a good way to m onitor the GPSCard c onfigura tion setti ngs. See R CCA in the MiLLenni um Command De scriptions Manual f or the RCCA def ault list. The follow ...
Appendices 34 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 D GLONASS COMMANDS AND LOGS GLONASS-SPECIFIC COMMANDS This chapte r descr ibes Mi L Lennium -GLO NASS GPSCar d comm ands impor tant to GL ONASS. GLONASS-specific commands are generated by using info rmation obtained from the GLONASS satellite system. Please see the f ollowing se ctio ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 35 PZ90TOWGS84 This command allows the user to input the Helmert transfor mation relating the GL ONASS PZ90 refe rence fra me to the GPS WGS-84 reference frame. In th is case, ( x,y,z ) is the desir ed WGS- 84 coordinat e set a nd ( u,v, w ) is t he given coordina te se t in PZ 90. T he ...
Appendices 36 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 UNIMPLEMENTED COMMANDS Currently, the ability to set satellite health, and the ab ility to de-weight th e range of a satellite in the solu tion computatio ns, is not enabled for GLONASS. Becau se of this, the follo wing comman ds will n ot wo rk with the MiLLennium-GLONASS GPSCard fo ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 37 Field # Field Description Example 1 $CAL A Log Header $CAL A 2 Week G PS week numbe r 992 3 Sec G PS time into w eek , in seconds 453075 4 Reserved for future use 5 Reserved for future use 6,7 8, 9, 10, 11, ..., 50, 51, 52, 53, 54, 55, ..., 68, 69, Bias 1, Std. Dev . Bias 1 Bias 2, S ...
Appendices 38 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 CALB Form at: Messag e ID = 87 Message by te cou nt = 32 + (16 * 32) Field # Data Bytes Format Units Offset Sync 3 char 0 Checksum 1 char 3 Message Id 4 integer 4 1 Messa ge by te count 4 inte ger by tes 8 2 Wee k num ber 4 integ er weeks 12 3 Seconds of w eek 8 double seconds 16 4 R ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 39 GALA/B ALMANAC INFORMATION The GLONASS almanac reference time and week are in GPS time coord inates. GLONASS ephemeris information is availa ble thr ough t he GEPA/ B log. GALA Structure: $G ALA week seconds week tim e SVID freq health TlambdaN Lambad N deltal ecc argperig deltaT del ...
Appendices 40 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 GALB Form at: Message ID = 78 Message by te cou nt = 112 Field # Data Bytes Format Units Offset Sync 3 char 0 Checksum 1 char 3 Message Id 4 integer 4 1 Messa ge by te count 4 inte ger by tes 8 2 Wee k num ber 4 integ er weeks 12 3 Seconds of w eek 8 double sec onds 16 4 Reference we ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 41 GCLA/B CLOCK INFORMATION This log contains th e time difference info rmation between GPS and GLONASS time as well as status flags. Th e statu s flags are used to indicate th e type of time pro cessing u sed in the leas t squ ares adjus tment. GPS and GLONASS time are both base d on t ...
Appendices 42 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 Table 2 Time Status Value Description 0 GL ONASS tim e floa ting 1 GLONA SS time fixed Example : $GCL A,994,149871.00,10787,10.62179349,167.82950123,1121, -3.0544738044739E -007,9, 4,00000000*7B,[ CR][L F]GCLB GCLB Form at: Message ID = 88 Message by te count = 68 Field # Data Bytes ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 43 GEPA/B EPHEMERIS INFORMATION GLONASS epheme rides are r efe renced to the Par ame try Ze mli 1990 ( PZ-90) geodetic datum, and GLONASS epheme ris information is available through the GE PA/B log. GLONASS coordinates are reconciled internally through a position filter and output to WG ...
Appendices 44 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 16 VelZ Z coordinate f or satellite velocity at re fere nce tim e (PZ90), in mete rs/s -3.387468338012698E+003 17 LSAccX X co ordi n ate for luni solar acceleratio n at reference time (PZ 9 0), in meters/s/s -1 . 862645149230957E-006 18 LSAccY Y coo rdin at e for lu niso l ar accel e ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 45 GEPB Format: Message ID = 77 Me ssage byte c ount = 156 Field # Data Bytes Format Units Offset 1 Sync 3 char 0 Checksum 1 char 3 Message Id 4 integer 4 Messa ge by te count 4 inte ger by tes 8 2 GPS w eek of log output 4 integ er weeks 12 3 GPS tim e of log output 8 double se conds 1 ...
Appendices 46 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 Table 3 GLONASS Ephe me ris Flags Coding N 7 N 6 N 5 N 4 N 3 N 2 N 1 N 0 <- <- Ni bble Number 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Bit Description Range Values Hex Valu e lsb = 0 P1 FLAG - TIME INTERVAL BETW EEN ADJACENT iISSUE ( ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 47 OTHER NOVATEL LOGS RCCA RECEIVER CONFIGURATION This log out puts a list of all curre nt G PSCard comm and settings. Obser ving this log is a good way to m onitor the GPSCard c onfigura tion setti ngs. See R CCA in the MiLLenni um Command De scriptions Manual f or the RCCA def ault li ...
Appendices 48 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 E TEST BED RECEI VER - TECHNI CAL SPECIFICATI ONS PHYSICAL Size 448.8 x 361 x 183.5 mm (without the 19” mounti ng brackets) Weight 10.2 kg ENVIRONMENTAL Operating T emperature -25° C to +55° C with 1 m 3 / minute air flow Storage T emperature -40° C to +85° C Humid ity 10-80% A ...
Appendices Test B ed Re ce iver Subsyst em A ddendum – Rev 1 49 INPUT/OUTPUT DATA INTERFACE Serial Bit rates: 300, 600,1200, 4800, 9600, 19200, 38400, 57600, 115200 bps, user s electable Default: 9600 bps (GPS GLONASS, GPS GEO) Connect or DE9P Electrical format RS-232C OUTPUT STROBES 1PPS Output A one-pulse-per-second T ime Sync output. T his is ...
Appendices 50 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 Default Channel Assi gnments Config Channel SV Ty pe Code DLL Ty pe Fra me Nav Ty pe Sy mbol Rate FEC Sky S earch 12 L1/L2 0 GPS L1 C/A, L2 P Narrow Corr. GPS GPS 50 No Automatic 1 GPS L1 C/A, L2 P Narrow Corr . GPS GPS 50 No Automatic 2 GPS L1 C/A, L2 P Narrow Corr . GPS GPS 50 No A ...
Index Test B ed Re ce iver Subsyst em A ddendum – Rev 1 51 INDEX 10 mh z outpu t, 12, 15 1pps, 12, 16 a/d, 28 accessories, 11 anten na, 11, 12, 17, 27, 28; activ e, 28; conn ector, 14; inst allation , 14; m odel, 28; m odels, 28; pas siv e, 28; prim ary, 27; sing le-f requency , 28 ascii, 20 automatic g ain control (agc), 27, 2 8 back panel , 14 ...
Index 52 Test B ed Re ce iver Subsyst em A ddendum – Rev 1 segm ent, con trol, 24 segm ent, space, 24 segment, user , 24 self-te s t , 29 serial n um ber, 19 serial port , 19, 20, 21 space segm ent, 24 speed, 28 strobe si gnal , 16 strobe si gnal s, 28 support , 20, 21 technical s pecifications, 48, 49 term inator, 12, 15 time, 21; inf ormation, ...
Test B ed Re ce iver Subsyst em A ddendum – Rev 1 53 ...
OM-AD-0020 R ev 1 00/04/11 Software Version s 4.52s3 (GPS/GEO ) and 6.48s16 (GPS/GLO NASS) NovAtel Inc. 1120- 68 Avenue N.E. Calgary, Alberta, Canad a T2E 8S5 GPS Hotline: 1-800-NOVATEL ( U.S. and Canada o nly) Phone: 1-403-295-4900 GPS Fax: 1- 403-295-4901 E - m a il: s uppo r t@no va t e l. c a W e b s i t e : http: / / www . no va t e l . c a Re ...
Novatel OM-AD-0020のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- OM-AD-0020の取扱説明書
- Novatelの製品カード
- パンフレット
- またはNovatel OM-AD-0020の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Novatel OM-AD-0020の取扱説明書に含まれています。
取扱説明書と呼ばれる文書のグループは、Novatel OM-AD-0020の取り付け説明書、サービスマニュアル、簡易説明書、またはNovatel OM-AD-0020のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Novatel OM-AD-0020の製品を使用するにあたって最も人気のある説明書を閲覧できます。
Novatel OM-AD-0020デバイスの取扱説明書はどのようなものですか？
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがNovatel OM-AD-0020を使用するのを助ける技術的文書のことです。説明書は通常、全てのNovatel OM-AD-0020ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。
Novatelの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。
1. Novatel OM-AD-0020の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははNovatel OM-AD-0020の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Novatel OM-AD-0020に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Novatel OM-AD-0020デバイスの基本機能を使うにあたってのヒント。 Novatel OM-AD-0020のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Novatel OM-AD-0020に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるNovatel OM-AD-0020のメーカー/サービスへの連絡先に関する情報。
Novatel OM-AD-0020についてご質問がありますか？
次のフォームを使用してください
見つけた説明書を読んでもNovatel OM-AD-0020の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがNovatel OM-AD-0020で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。