DOD FX7の取扱説明書

18ページ 0.2 mb
ダウンロード

ページに移動 of 18

Summary
  • DOD FX7 - page 1

    GUIT AR EFFECTS PROCESSOR/PREAMP OWNER'S MANUAL A Harman International Company ...

  • DOD FX7 - page 2

    IMPORT ANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING: W A TER AND MOISTURE: Appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liq- uids are not spilled into the enclosure through openings. POW ...

  • DOD FX7 - page 3

    signal processing Introduction .........................................................................................................2 About the Pictorial Guide Indicators................................................................2 W arranty .................................................................................................... ...

  • DOD FX7 - page 4

    signal processing Introduction W elcome to the world of the DOD FX7! Y ou have purchased the finest guitar signal processor and preamp of its kind; hardly a surprise when it comes from DOD. The FX7 gives you both functional flexibility and tonal excellence, driven by our proven effects processing technology . The FX7's palette of effects gives ...

  • DOD FX7 - page 5

    signal processing 6. The foregoing is in lieu of all other warranties, expressed or implied, and DOD neither assumes nor authorizes any person to assume for it any obligation or liability in connection with the sale of this product. In no event shall DOD or its dealers be liable for special or consequential damages or from any delay in the perfor- ...

  • DOD FX7 - page 6

    signal processing SECTION 1 - GETTING ST ARTED Supplying Power The FX7, like any piece of computer hardware, is sensitive to voltage drops, spikes, and surges. Interference such as lightning or power "brownouts" can seriously , and in extreme cases, permanently damage the circuitry inside the unit. Here are a few tips that will help you g ...

  • DOD FX7 - page 7

    signal processing Front Panel Controls The front panel of the FX7 is laid out in a simple and straightforward way to make programming as easy as possible. Functions of each sec- tion are: 1) PROGRAM AND BANK SELECTOR FOOTSWITCHES - These footswitches give you access to the User Programs in the FX7 and allow you to change User Banks. 2) EFFECT SELEC ...

  • DOD FX7 - page 8

    signal processing 6) DISPLA Y - The LED display in Program mode, shows which Bank and Program is currently selected. In Edit mode, it shows the number and/or status of the selected effect. 7) DA T A WHEEL - In Program mode, use the Data wheel to scroll through Programs. In Edit mode, use it to change the setting of effect groups. 8) CLIP LED - The ...

  • DOD FX7 - page 9

    signal processing Hooking Up DO NOT APPLY POWER TO THE FX7 UNTIL INSTRUCTED. 1) STEREO: Connect the Left and Right outputs to a pair of guitar amplifiers, or the inputs of a mixing console. If you're using guitar amps, set the tone controls flat (no boost or cut) and balance the levels between them. If you're using a console, pan the FX7 ...

  • DOD FX7 - page 10

    signal processing SECTION 2 - PROGRAMMING THE FX7 Navigating The FX7 The FX7 is designed to be both easy to program and flexible. The structure of an FX7 Program is logical, and it doesn't require a lot of time to master . T o select Programs in the FX7: 1) After you power up, use the Data wheel to scroll through the Programs. As you scroll, t ...

  • DOD FX7 - page 11

    signal processing 1) After you power up, the FX7 defaults to Program mode. Select a Bank by pressing the Bank selector footswitch. The display shows the selected bank number on the left side of the display and a dash on the right. The display might look something like this: or 2) Press footswitch 1, 2, or 3. The dash in the display changes to show ...

  • DOD FX7 - page 12

    signal processing NOTE: When you change the selected Parameter from the stored value, a decimal point appears in the bottom right corner of the display and the Store LED lights. That's it! Y ou can manipulate any effect setting in the FX7 by pressing the associated Effect selector button on the front panel and turning the Data wheel. The Effec ...

  • DOD FX7 - page 13

    signal processing Press the effect Select button to toggle the effect in and out of bypass mode. REMEMBER: The decimal point indicates that the value shown in the display is not the stored value. T o bypass the selected Program: 1) Press the currently selected Program footswitch on the pedal- board. The footswitch's Status LED flashes and the ...

  • DOD FX7 - page 14

    signal processing About the FX7's Effects The FX7 has a large library of effects that covers virtually every possible need. Because they are so numerous, we have designed the following charts to give you as much relevant information as possible while omitting tedious or obvious details about each module's setting. For example, Distortions ...

  • DOD FX7 - page 15

    signal processing MONO DELA YS Delay # 123456789 Name fback/level fback/level fback/level fback/level fback/level fback/level fback/level fback/level fback/level 100 0/15 0/30 0/50 15/15 15/30 15/50 30/15 30/30 30/50 200 0/15 0/30 0/50 15/15 15/30 15/50 30/15 30/30 30/50 250 0/15 0/30 0/50 15/15 15/30 15/50 30/15 30/30 30/50 300 0/15 0/30 0/50 15/1 ...

  • DOD FX7 - page 16

    signal processing Factory Program List Following is a list of the factory Programs available in the FX7. They are divided into Banks with a suggested application for each sound. As always, don't be afraid to experiment. PROGRAM # PERFORMANCE TIPS 01- Big Solo Guitar Solo Distortion w/ Chorus, Delay , and Reverb 02- Heavy Crunch Heavy Rhythm Di ...

  • DOD FX7 - page 17

    signal processing FX7 Block Diagram Input Buffer Input Distortion Multiplex Compressor µ Pot LEDs Switches Micro Controller Attn Pre- Emphasis De- Emphasis RAM A / D DSP D / A Output Jam-A-Long Head Phone Left Out Right Out 15 FX7 owner's manual ...

  • DOD FX7 - page 18

    A Harman International Company DOD Electronics Corporation 8760 South Sandy Parkway Sandy , Utah, 84070 T elephone (801) 566-8800 F AX (801) 566-7005 International Distribution: 3 Overlook Drive, Unit 4 Amherst, New Hampshire 03031 U.S.A. F AX (603) 672-4246 FX7™ is a registered trademark of DOD Electronics Corporation Copyright © 1996 DOD Elect ...

メーカー DOD カテゴリー Stereo Amplifier

DOD FX7のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- FX7の取扱説明書
- DODの製品カード
- パンフレット
- またはDOD FX7の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、DOD FX7の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、DOD FX7の取り付け説明書、サービスマニュアル、簡易説明書、またはDOD FX7のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、DOD FX7の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

DOD FX7デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがDOD FX7を使用するのを助ける技術的文書のことです。説明書は通常、全てのDOD FX7ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

DODの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. DOD FX7の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははDOD FX7の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。DOD FX7に関してこのドキュメントで見つけることができる全てのヒントの目次
3. DOD FX7デバイスの基本機能を使うにあたってのヒント。 DOD FX7のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。DOD FX7に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるDOD FX7のメーカー/サービスへの連絡先に関する情報。

DOD FX7についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもDOD FX7の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがDOD FX7で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)